Back in 4.0 we hide all gaschange events during the first 30 seconds,
not just gaschange events on second 0. Eg, the OSTC3 emits its gaschange
event on the first sample, which can be 2, 10 or 30 seconds into the
dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace get_gasmix_from_event and get_gasidx with get_cylinder_index.
get_cylinder_index actually knows about both types of gaschange events
and the difference between them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the info box, we can't use the event data, because its not 1:1
mapped to whats in the cylinder and what we actually switched to. Use
the plot_data here we already calculated what we are switching to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The values for drop_stone_mode, bottomsac, and decosac are typically the
kind of personal data specific to a diver that is unlikely to change
from one dive plan to the next.
This patch stores/restores them to/from the preferences file. For this,
it adds bottomsac and decosac to the prefs structure; drop_stone_mode
was already there, though not stored/restored.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch contains some updates to the user manual to reflect the new
images that were submitted previously. The updates include:
1) Moving the "Load Photos" section to the section daling with the input
of dive information (photos qualify as additional dive information).
2) Changing the wording around the new button in the tool bar.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pressure graph will go from 0 to negative - one could make a weak
argument that this would at least tell you how much pressure you'd need in
the cylinder to start with, but that's kinda lame.
Fixes#615
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculating the timezoneoffset for the current date really makes no sense
whatsoever when displaying a time that isn't "now".
Fixes#605
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we had a trip selected, we ignored that and simply called
the DiveAdd functions, but the mainTab code that deal with selections
to show one or more dives or trips asked how many trips were selected
to the DiveList, and since a trip was selected things go kabum.
Fixes#606
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile was still the planner one, so we need to force
a replot.
Fixes#621
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not use MainWindow::instance() inside of a non-static
mainWindow method, that's just bogus.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ugh. Each time you wanted to change a cylinder, a new connection was
being created on this object, delaying the correctly setup of the item.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you entered part of the name of a cylinder this was
being treated as a new cylinder, and not selecting the first
one.
Fixes#628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a 'Use default file' button on preferences in a way
that doesn't clutters the interface.
Fixes#630
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We save an HTML table-based plan, so we need to get the text as html,
not plaintext.
Fixes#634
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- set application-wide locale from preferences
- use custom date format for display
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The access manager is only one, while we can make requests from
different parts of the application, so relying on the manager
finished() signal to see if something was done or not was a
not very good move.
The QNetworkReply is created when a get() is invocked on the
AccessManager and that's unique. connect it's finished()
signal instead.
bonus: code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems the translation tools don't like the ?: in the argument - can't
blame them. So use an explicit if clause instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
During Subsurface startup there are several warnings reported:
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
The reason is explained at https://wiki.archlinux.org/index.php/Libpng_errors
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use type 25 on UDDF import when the gas mix contains some helium.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replacement figures for user manual
Here are 12 replacement figures for the user manual to bring the
figures
in line with the current UI. This relates to the updated profile
toolbar
and manual dive profile entry. I did not change any text of the manual.
That will happen tomorrow evening.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
From 85413b967c02738d47f0b7779613f33cc7898c17 Mon Sep 17 00:00:00 2001
From: Willem Ferguson <willemferguson@zoology.up.ac.za>
Date: Wed, 16 Jul 2014 07:26:43 +0200
Subject: [PATCH 4/4] Replacement figures for user manual
Here are 12 replacement figures for the user manual to bring the figures
in line with the current UI. This relates to the updated profile toolbar
and manual dive profile entry. I did not change any text of the manual.
That will happen tomorrow evening.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The wrong O2 percentage was due to not referring to the correct cylinder
but grabbing any o2 value in any cylinder. While fixing this, I noticed
that also end pressure was missing the cylinder selection, so fixing
that as well.
Fixes#626
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To obey <xsl:output omit-xml-declaration="yes"/> element
one should rely on libxslt to do its job instead of writing
document himself.
Discussion on this subject can be found at
http://comments.gmane.org/gmane.comp.gnome.lib.xslt/3839
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- apply vertical layout to top-level dialog. This solves label clipping
- call adjustSize() on dialog to fit all labels (translated text could
be longer than original)
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were actually searching dives which match the dowloaded position
fixes. So we're also trying to take into account if the fix is automatic
or no based on a limited amount of predefined strings (bad idea, as the
user can change in companion app settings the predefined string).
This way, in actual implementation, if program concludes that a fix has
been manually got or, simply, the user is unlucky enough to have all the
position fixes out of the dive time, find_dive_n_near() function will
pair fix and dive in an ordered way (1st fix -> 1st dive; 2nd fix -> 2nd
dive ...) which is probably erroneous, except for manual position fixes.
BTW actual implementation can't pair the same gps position with more
than one dive, which would be the case, e.g. in repetitive dives while at
anchor in the same point.
The patch changes the logic:
- Search positions for defined dives (instead of dives for defined
positions) without care if position has manually or automatically been
set.
- Only take care of those dives that don't have a position yet.
- It makes two assumptions:
a.- If the position fix has been taken during the dive time, is
correct. If there are more than one inside the dive time, takes the
first one (closest to the DC's reported time).
b.- If not during diving time, the correct one is the nearest fix
before the dive begins (also the usual case if manually fixed from the
smartphone just before jump into the water). But will work too if there
is only one fix *in SAME_GROUP range* after the dive (another usual
case).
- Finally, as copy_gps_location() in dive.h is used only here, let it
take care of naming the dive if user hasn't named it yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most dive computers start always with the first cylinder (and if not,
they give a gas switch in the first few seconds). Trying to follow this
principle on divelogs.de export.
The bug 626 sounds like a bit different case so a sample XML log would
be needed to ensure that use case gets fixed.
See #626
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It is really confusing when the size of the cylinder does not match the
description. Inconsistent data in will mean inconsistent data out and
validating that export works means I try to get consistent data out...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In reality we have no concept for handling those, yet. But the UI doesn't
prevent the user from entering multiple cylinders with the same gasmix, so
we need to help the user to get rid of them as well.
If the user attempts to remove a cylinder we check if there's a second
cylinder with the same gas. If that's the case then we can proceed and
remove the cylinder the user wants to get rid of without losing that gas
for the dive. The only tricky issue is that we need to make sure that if
we remove the first cylinder that one is actually replaced with one with
the same gas.
Fixes#622
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
updateDive() cannot reset the changed status - this is called while the
dive is edited. Instead this status is reset when the user either accepts
or rejects the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We keep getting this wrong. First you check all selected dives that are
not the current dive, make sure the equipment was the same before the edit
and then apply the changes. Then, when you are done with ALL of them, then
you change the current dive. Otherwise you cannot compare to the 'before'
state anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a fun little bug. Tomaz pointed me in the right direction. The UI
restructure with the displayed_dive had another unintended side effect
here. It is not valid not to set up the widgets just because the dive_list
is empty. The displayed_dive isn't on the dive_list until it is saved - so
while the user is adding or planning a dive, we still need to show the
equipment widgets.
Fixes#614Fixes#601
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oh boy, this should allow for altitude in 'ft' as well.
I set an arbitrary cutoff at 3000m (and switched things to increments of
10m for the altitude).
Fixes#629
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will make more easy to move code around in the future.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the code that saves and restores the dive planner
settings.
Fixes#608
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The text selection was not being set, bummer.
See #628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
