Correctly use gettextFromC::instance()->tr(); instead of a simple
tr(); to translate the dive mode names.
This goes on top of 0bc9edf855
and finally makes the whole thing work.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The list of known dive computers was stored in a multi-map indexed
by the device name. Turn this into a sorted QVector. Thus, no
map-to-list conversion is needed in the device editing dialog,
which distinctly simplifies the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On deletion of a single or multiple pictures, the whole DivePictureModel
was repopulated, which was clearly visible in the UI, owing to the
reconstructing of all images in the profile plot.
To avoid this vexing behavior, implement proper deletion routines in
DivePictureModel and ProfileWidget2. Since this needs sensible erase()
semantics the QList<PictureEntry> member of DivePictureModel was
replaced by a QVector. A QVector should be the default anyway, unless
there are very specific reasons to use a QList (which actually is
a deque, not a classical linked list).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function removePicture() had a flag "last", which would indicate
that the called had finished removing pictures. Only then would
the model be recalculated.
This is a strange interface and, matter of fact, the caller was buggy:
if the last picture to be removed didn't have a proper url, removePicture()
was never called with "last" being set.
Change the interface to take a list of pictures to be deleted. This
will allow us to make picture deletion smarter in follow-up commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the old code a combination of removeRows()/insertRows() was used
to signal a model reset.
Replace this by a single, modelReset signal. This saves a call to
plotPictures() and will allow us to be smarter in the future,
when removing pictures.
Reset-model and remove-items are semantically different.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add a divemode column to the planner model and a
corresponding field to struct divepoint and fill it
in the corresponding functions.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the old code, we used to reload the whole picture list on drag & drop
to the profile. Instead, only update the drag&dropped picture and repaint
the profile-pictures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The size of the to-be-created thumbnails was passed from DivePictureModel
to Thumbnailer. This became more and more bothersome, because the size
had to be stored with the request. Calling from Thumbnailer into
DivePictureModel was not an option, since this is not linked to all tests.
Therefore, move these functions to the Thumbnailer class.
Since the maximum thumbnail size is now known to the thumbnailer, the
dummy and failure images can be precalculated, which makes switching
between dives faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Connect the thumbnailer signal to the dive picture model slot.
This needs some code-reshuffling in the dive picture model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a new class, which performs all thumbnailing code.
This is mostly code reshuffling. Thumbnails are extracted
either from a cache or thumbnail calculation is started in
a worker thread.
Since getHashedImage() is called from a worker thread it
makes no sense to call subfunctions in yet another worker
thread. Remove these calls.
In contrast to the previous code, on error the background
thread produces a failure image, but it is not yet shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In imagedownloader.cpp the only thing we need from the picture struct
is the filename. Therefore, use QStrings instead of the picture struct.
This simplifies memory management.
Remove the clone_picture() function, which is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
SHashedImage was a subclass of QImage, which fetched the image according
to the filename hashes. Turn this into a function, as this is much more
idiomatic and flexible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code loaded all thumbnails into memory at once. This does
not scale to logs with thousands of pictures. Therefore, save
the pictures to individual files and only load the currently
needed pictures.
Currently, this will make changing switching between dives slower,
because the thumbnails are loaded from disk. In the future, it
is planned to do this in a background thread without blocking
the user interface.
A notable difference to the old code: Thumbnails are now indexed
by the image-hash (i.e. the content of the raw image) and not
by the filename of the image. Thus, different paths to the same
image should only be saved once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To potentially conserve memory, don't keep copies of scaled thumbnails.
Scale the thumbnails on demand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
So far we only wrote messages to subsurface.log on Android (since we couldn't
figure out how to make that file user accessible on iOS). Now that that's
fixed, we also need to actually write to the file in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous taglist_get_tagstring signature/implementation did not allow
handling of cases where inputted buffer could not contain all tags.
New implementation allocates buffer based on pre-computed size allowing to
insert all tags in the returned string.
Added get_taglist_string in qthelper to handle conversion to QString
Added TestTagList with tests for taglist_get_tagstring
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Add DiveItem::displayTags helper method to return Tags as a QString
New Tags column is
by default inserted before "Photos" column
by default disabled
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
To ease trouble-shooting of the picture thumbnailer add a number
of debug- and info-messages.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the numeric format of many values printed to the UI to
reflect the correct numeric format of the selected locale:
- dot or comma as decimal separator
- comma or dot as thousands separator
In the Qt domain the `L` flag is used case specific mostly
in qthelper.cpp.
Then the helper functions get_xxx_string() are used more consistently.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Change the strategy when to allow cylinder removal from a dive:
- Not remove when cylinder has gas switch events, in any other cases
allow removal
- Remove this whole "cylinder with same gas" thing being a criteria
for cylinder removal
When removing a cylinder which has corresponding pressure info in
samples, also remove this pressure info from the samples.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Use struct temperature_t for temperatures in struct stats_t and
use get_temperature_string() when printing these temperatures for
statistics and HTML export.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Mostly replace "return (expression);" by "return expression;" and one
case of "function((parameter))" by "function(parameter)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a dive manually, you might clear the "duration" field and fill
in your value by hand. Unfortunately, commit #1052 produced a bug that
practically limited the dive duration to 6 minutes once the field was cleared.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This patch allows the planner to save the last manually-entered
dive planner point of a dive plan. When the plan has been saved
and re-opened for edit, the time of the last-entered dive planner
point is used to ensure that dive planning continues from the same
point in the profile as was when the original dive plan was saved.
Mechanism:
1) In dive.h, create a new dc attribute dc->last_manual_time
with data type of duration_t.
2) In diveplanner.c, ensure that the last manually-entered
dive planner point is saved in dc->last_manual_time.
3) In save-xml.c, create a new XML attribute for the <divecomputer>
element, named last-manual-time. For dive plans, the element would
now look like:
<divecomputer model='planned dive' last-manual-time='31:17 min'>
4) In parse-xml.c, insert code that recognises the last-manual-time
XML attribute, reads the time value and assigns this time to
dc->last_manual_time.
5) In diveplannermodel.cpp, method DiveplannerPointModel::loadfromdive,
insert code that sets the appropriate boolean value to dp->entered
by comparing newtime (i.e. time of dp) with dc->last_manual_time.
6) Diveplannermodel.cpp also accepts profile data from normal dives in
the dive log, whether hand-entered or loaded from dive computer. It
looks like the reduction of dive points for dives with >100 points
continues to work ok.
The result is that when a dive plan is saved with manually entered
points up to e.g. 10 minutes into the dive, it can be re-opened for edit
in the dive planner and the planner re-creates the plan with manually
entered points up to 10 minutes. The rest of the points are "soft"
points, shaped by the deco calculations of the planner.
Improvements: Improve code for profile display in dive planner
This responds to #1052.
Change load-git.c and save-git.c so that the last-manual-time is
also saved in the git-format dive log.
Several stylistic changes in text for consistent C source code.
Improvement of dive planner profile display:
Do some simplification of my alterations to diveplannermodel.cpp
Two small style changes in planner.c and diveplannermodel.cpp
as requested ny @neolit123
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
There are ca. 50 constructs of the kind
same_string(s, "")
to test for empty or null strings. Replace them by the new helper
function empty_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move divepicturemodel.cpp to the desktop only category and deal
with the (limited) fallout. We, currently, do not support dive
pictures tied to the profile on mobile, so there is no use
including this code.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Do not pull in the DivePlannerPointsModel::instance as this is not
used in the called function. We (currently) do not support deco
computations on mobile, so trying to pull in any deco state from
the planner is futile anyway.
With this uncoupling, 6 more model files are not needed in mobile
any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a somewhat hacky commit. For a very long time, the delete
from the divelist on mobile crashed. That is, not always for anyone,
but for me almost consistently. This commit tries to solve it.
I found that trying to save the delete immediately after removing
data from the underlying model seemed to cause the crash. Hacking
around, I found that a simple beginResetModel/endResetModel between
the delete of the underlying model data and actual save is
sufficient to solve the crash.
The big question is, why does this all work? I suspect some of race
condition between deleting model data, and giving the QML engine
the opportunity to do its thing.
This is also related to issue #311, but that is not implemented
here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
