This adds support for importing cylinder information from at least Xdeep
and Diving Log v 5.0.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF only supports a specific set of alarms. Some events also don't map
to alarms but map to other types of elements in UDDF.
This patch adds a map of the accepted types. Where a map doesn't exist
the type will not be mapped to an alarm, the option then remains to
map it to another kind of element, in the same way that happened with
headings and gas switches.
This removes the need for the specific exclusion of heading and
gas switch, as they are now simply not included in the map.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using node() along with the node-set seems to grab the weights properly
for me.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that our UDDF export is adding time after the event name. Thus we
need to add reading the following time as well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adjust to UDDF 3.2 specification and use proper tag name for air
temperature.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The switchmix values must be concatenated properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to export only used cylinders to divelogs.de. The
detection is based only on o2 percentage as per our test dives. However,
the new cylinder id would be better, but that does not exist on old
dives.
Fixes#757
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug when the first sample doesn't contain pressure info.
This fixes that by selecting the first with pressure info.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XDS schema for UDDF is very sensitive to ordering of elements
so I've rearranged many of them to match. Elements in:
- informationbeforedive
- waypoint
Adjusted namespace of export to correct UDDF namespace.
Updated remaining references to mixes it include prefix 'mix'
Moved equipment from informationbeforedive to informationafterdive *
Change trip ids to generated IDs and updated tripmembership to use
the trip id instead of the name *
* These constitutes a difference in XSD and the documentation. I will
raise these issues with the author.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed underscore from buddy name elements
Added 'mix' prefix to gas ids. Ids must not start with a number.
Added mandatory profile data with empty tags.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XPath was incorrect for parsing divecomputers into the equipment
section, meaning they dont get inserted.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with buddies, sites could contain characters which are not valid
in Ids. Also, it is very possible to have duplicate site names.
This uses an XSL generated id to prevent any issues.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is instead of using their names, which may contain illegal
characters.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add name at <generator> level, and add additional <homepage> in
contact tag.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently repetition groups are used to group dives into trips. This
is not really correct. Repetition groups should really represent a
group of dives where tissue loading needs to be preserved between
dives (typically the same day).
UDDF has support for trips, using the <divetrip> tags. This is a
bidirectional link between the dives and the trips.
This patch adds support for these trips. However, it leaves in the
repetition groups. Repetition groups may need further consideration.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sum together all of the weights recored on a dive to use in the
<leadquantity> tag in UDDF export.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous patch would not fill the first name field if there was
no second name. This rectifies that.
Signed-Off-By: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This theoretically allows one to use format like
1°36'11.711"N 124°46'00.368"E for GPS coordinates. However, in practice
this is not allowed without properly parsing this format in C/C++ side.
This patch changes the export format to UTF8 and improves the location
import by allowing either gps or location attributes to be imported.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XSLT didn't expect the temperature tag to be within the
<divecomputer> element in the source, so the selection wasn't finding
it.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Selection of <cylinder> elements wasn't working where dives are
part of a trip. Change the selection so that it will select all
cylinders whether or not the dive is part of a trip.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to there being no xsl template for the userID, it ended up getting
inserted at the start of the output. This adds an empty template to
map the <settings> element, preventing this erronious insertion.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive site structure in the UDDF export was using an old structure
where each site is simply listed as a <dive_site>.
The new structure requires a single <divesite> containing at least one
<divebase> - a base location where you are diving from, and at least one
<site>.
As subsurface only tracks sites, I've created a single divebase to be
referenced by all of the sites.
Note: although profiles in Subsurface can be grouped into trips, these
are groupings of profiles, not sites, and the mapping may not be
simple. e.g. on different trips the sames sites may be visited but a
different base used. Or, different bases may be used on a single trip.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Part of a series bringing UDDF export closer to the UDDF standard, as
per www.uddf.org.
Currently when exporting to UDDF buddy entities are created
one-per-unique-combination. This means that a group of buddies on a dive
are exported as a single buddy, with the names comma separated.
This patch identifies all unique buddies, whether used independently or
along with other buddies on a dive. They are then linked independently
on each profile.
It also uses the UDDF standard <link ref=""> instead of
<buddy_ref ref="">
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Data read from a divecomputer is moved inside the divecomputer tag
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to grab the used cylinders when in open circuit mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Shearwater describes the current mode with tag currentCircuitSetting,
thus we should record the ppO2 only when in CCR mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If manual CSV import does not have any dive number, give a default one
so that the dives get import and not silently ignored.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only place where I'm not sure if there are unintended sideeffects of
changing over to the new domain is QCoreApplication::setOrganizationDomain
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All recorded cylinders are exported to divelogs.de. This potentially
includes cylinders that have not been used.
The start and end pressure for additional cylinders is taken from the
cylinder information. Main tank gets this information from first and
last pressure reading or from the cylinder information if samples are
not available. This should be ok when there is only one cylinder with
pressure sensor, but does not probably work for people having multiple
sensors.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support for importing additional cylinders from
divelogs.de. This also adds support for He on the import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that Suunto stores temperature value of 0 when there is no
temperature reading (I guess). Thus this patch ignores temperature
samples that are zero. Otherwise, Subsurface looks into the samples and
grabs the lowest number as water temperature.
See #720
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
