add() and remove() are not used anymore since this is done using
undo commands. The planner uses CylindersModel instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The CHANGED macro was defined in the cleanerTableModel header.
Since it had only one user, expand it there. The macro was very
questionably anyway, as it would set the local "vString" variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A small code consolidation:
With one exception, all targets of the switch statement would
test for CHANGED(). Instead do the test once and exit early.
This changes the behavior of the function: if not changed, there
will be no more dataChanged-signal. However, this appears to be
the correct thing to do anyway. And it is easily changed if
it matters after all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Cylinder-editing is controlled by undo (either by saving a planned
dive or by using the equipment tab). There is no point in setting
the dive_list_changed flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinders in the events must be reordered if we remove
a cylinder. To avoid duplication of code, move the reordering
function into qthelper.cpp, though it might not be ideal
there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The CylinderModel always accessed the global "displayed_dive" and in
some special cases also "current_dive". To implement cylinder undo,
the model should work on an arbitrary dive. Therefore, in analogy
to the weight model, make the dive dynamic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Turn the code in CylindersModel that creates a new cylinder for
addition into its own function to avoid code duplication. This
will be used from the undo commands.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To mark invalid dives, we use a struck-out font, which was a static
variable at translation unit scope, i.e. initialized at application
startup. Sadly, this crashes on iOS.
It is unclear when we can initialize fonts. Try to move initialization
to the constructore of DiveTripModelBase and make the font a member
of that class. For consistency, also make the invalidBrush a member
of this class.
This now means that the diveData function cannot be static anymore,
since it needs access to the font and brush. But OK.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mark invalid dives in the dive list by striking them out
and rendering them with a grey color. The color-change is
not sufficient, because the default model delegate ignores
color hints if the item is selected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive list is cleared or updated, the entries in the
divesite-model become stale and therefore the divesite-model
(with the actual name LocationInformationModel) also must be
updated. This was done manually in some parts of the code and
forgotten in others. Therefore, do it directly in the clear()
and reset() function of the dive list-model.
This might be a bit of a layering violation: why should one
model call into another if they are not in parent/child
relationship? However, this seems easier than introducing
a global "reset dives" function that coordinates the models.
Moreover, it does not appear 100% safe: if the clearing of
the divesite model causes accesses to the divelist-model,
they happen in the midst of a model reset and we had horrible
bugs with that kind of things. However, I don't think that
should happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The setData() function was used to edit the number of a dive.
However, that doesn't appear to be functional. Therefore, remove
the code. There is a context-menu entry "renumber dives" for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The diveListNotifier.divesSelected() signal is used to inform the
models of a selection change. It sent the current dive as a second
parameter. This is redundant, because the only sender of the signal
sets current_dive just before sending the signal. Remove the
parameter, which appears to be an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTripModelTree::divesSelected() returned early if
no dives were selected. Thus, the current dive was not
updated. Remove the check for no dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is only used in the mobile UI where the sort direction is fixed and we
refer to dives based on the tree model. So the terms used and the concepts
that these rely on should be guaranteed to be valid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MobileSwipeModel is probably not an ideal name, but all I could come up with.
One of the main complications here is that our list is reversed with respect to
the source model. We should change that one day. Probably by moving the
sorting down to the core-model.
Since looking up the source row is somewhat expensive, the lookup is cached for
a single entry because accesses come in bursts for a single dive. This should
be a good compromise and avoids keeping track of a full row-to-dive array.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In analogy to the DiveTripModel split, derive MobileListModel from a base
model that exports the roles, etc. This will allow us to create a second model,
which nevertheless possesses the same roles and all that without too much code
duplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we want to add a second model, but not have to manage two models
everywhere, create a class MobileModels that contains both of the models. When
calling reset() on that class, it will reset both of the models, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the undo-command for importing dives also on mobile. This should make the
whole disconnect-model shenigans unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive data is cleared, all pointers in the undo-stack become stale.
Desktop explicitly called Command::clear() in that case, but mobile doesn't.
Thus, move the clear() call into DiveTripModelBase::clear()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The weight-undo commands need this. Therefore, we have to compile the
WSInfoModel if we want to access the undo commands from mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To act as a drop-in replacement (at least as much as possible),
move the roles from the old DiveListModel to the common base
model of mobile and desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a model which represents all top-level items and, potentially, one
expanded trip as a flat list.
Pass down roles to the source model and let the source model handle that. We'll
have to do some ifdef-ery, but so be it.
Additionally, compile the base model on mobile as well.
This contains a couple of hacks to make things compile at all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once the the mobile app uses the new models, this will be necessary
to get the correct number of filtered dives after startup.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is an idle "optimization": The compiler may now not need
to access the vtable when calling virtual functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If compiled on mobile, on change of the current dive, don't send
a signal, but send changed-event with the CURRENT_ROLE for both
dives that changed status (previously selected and newly selected).
Mobile does not use this yet, but will do so with the new flattened
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This role returns true if the given trip contains the current
dive. This will be needed by the mobile list model to decide
if a newly added trip should be expanded right away.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use this role to test whether a dive is the currently displayed dive.
This will be needed to transport changes of the current dive to
the mobile list models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The number of dives was updated when the model of the list was
changed. Since we removed the multi-threading, the model is
not disconnected/connected anymore and therefore we don't get
the appropriate signal. Instead of introducing a different
signal, make the shown-value a Q_PROPERTY. Thus, we can easily
send a changed signal if we have to.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a combo-box where the user can switch between "fulltext",
"people" and "tags" filtering. Connect the combobox to the
already existing filter-code.
Dirk: make combo-box smaller by using a smaller font and restricting
the width. Setting both maximum and preferred widths gives more
consistent results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the DiveFilter class on mobile to update the filter. This
is mostly for convergence of the mobile and desktop models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Convert to QString instead of a QByteArray. Use qPrintable()
instead of data(). This might do one more UTF16->UTF8 conversion.
However, this is completely irrelevant, since we don't change
the type of a cylinder in a tight loop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The C-string cyl->type.description was set without the old data
being freed. Free the old string before overwriting the pointer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tank-info-delegate cast its model to CylindersModelFiltered,
since this is what the equipment-tab uses since implementing the
filtering of unused cylinders. However, the planner users the same
delegate and still uses the unfiltered CylindersModel. This means
that the (dynamic) cast returns a null pointer and crashes.
One possibility would be to derive CylindersModelFiltered and
CylindersModel from the same class that defines virtual functions
and cast to that class.
This is a different attempt: don't cast (i.e. stay with a
QAbstractItemModel and play it via Qt's model-view system. Firstly,
replace the passInData function by a role to setData(). Secondly,
read the working-pressure and size via new columns using data().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This header is a rebase artifact and introduces a pointless
column in the cylinder tables. It was erroneously introduced
in 6622f42aab.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Nobody was ever listening to this signal(?) and the last sender
was removed in ac52034778.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveFilter class defined the showDive() function to test
whether a dive should be filtered or not. This was used in
DiveTripModel to loop over all dives or all dives affected by
an editing action.
This restricts us in how we do filtering: We can't use indexes
that give us directly the result. To make the filtering more
flexible, move the actual loops that do the filtering to
the DiveFilter class.
The undo-commands likewise called directly the showDive()
function to check whether newly added dives are shown.
Use the new interface here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the filter-criterion and the current dive is
hidden, a new dive is made current. However, when a dive is
hidden because it was edited, it is still shown.
Make this consistent by also selecing a new current dive
in the latter case. Do this by comparing the current_dive
before and after calculating the filter. Since this is now
done in multiple places move this code to the ShownChange
class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now filter at the model level, items are by definition
shown. No need for a flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This role was used by the filter-proxy model as filter criterion.
Since we don't use that model to filter anymore, we can remove
the role.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we're doing the filtering at the core, don't filter
in the sort-model (which is now inappropriately named).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We use a QFilterProxyModel to filter out dives that are hidden
according to the current filter-criterion. Instead, filter the
dives already at the DiveTripModel level. Filter out hidden
dives immediately when receiving them. The only difficult case
is when dives are changed, because then visibility can change.
This means that we have three cases to consider:
1) Visibility unchanged -> send change signal
2) Change from hidden to unhidden -> add dives to model
3) Change from unhidden to hidden -> remove dives from model
Things get complicated by the fact that the tree-version of
the model might have to add/remove full trips!
Suggested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the planner we used to filter out "unused" cylinders as in the
equipment tab. It is unclear whether that makes sense or can even
easily be reproduced, since such cylinders have to come from an
imported dive.
To be on the save side, let's not do this. Replace the
CylindersFilteredModel introduced recently by a plain
CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder-model had an instance() function, but actually
there were two cylinder models: one used by the equipment tab,
one used by the planner.
This is misleading. Therefore, remove the instance() function
and make the cylinder-model a subobject of the planner-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No one will ask you about your dives in the last seven months (and the
existing code actually provided the past 210 days in that case). Instead
do more intuitive periods. Last month, quarter, half year, year.
Use Qt's ability to make sane date calculations easy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add section headers to the dive summaries on mobile by adding
a section-property. Of course, this will not work on desktop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing the dive summary via a completely unstructured
QStringList to QML, implement a dynamic model. For potential reuse
on desktop (though somewhat unlikely) the model has two interfaces,
one for QtWidgets and one for QML. The former is based on columns,
whereas the later is based on roles. The number of columns is
set dynamically. The roles currently support access to two columns.
If more columns should be accessed from QML, more roles have to
be added manually.
This commit only creates the model and hooks it into QMLs global
context, but does not yet change the QML page.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive site, the user can search for close dive sites
to merge duplicates. Dive sites without location are treated as
being located at 0N0E. This makes no sense, because:
When selecting a dive site without location, we shouldn't list
dive sites close to 0N0E.
Likewise when having a dive site close to 0N0E, we shouldn't list
dive sites that have no location.
Therefore, ignore these cases.
This also means that now dive sites without location are not
considered as close to other dive sites without location. That
might be a debatable point.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It shouldn't happen, but currently we overwrite the displayed_dive
without updating the CylindersModel. Thus, CylindersModel may now
crash when the new displayed_dive has less cylinders than the old
one.
For now, catch this condition. Treat the root cause later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In some case the scaling (real value <-> UI value) is different
for mobile and desktop. In order to make the difference understandable
comments are added to each function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setBottomSac, setDecoSac and setFactor in diveplannermodel
receives display value which are then converted.
subsurface-mobile have slightly different values, move the
correction of these from plannershared to diveplannermodel, in
order to keep the whole convert in one place.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change ascent/descent setter function names to set_<name>Display
to show the value is prepared for displaying (common for desktop and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
diveplannermodel already contains set_<asc/desc> function that convert from
screen value to real value; this adds get functions that convert real value to
screen value, so now all conversions are done in one place.
Use prefix Display to identify this is values prepared for the UI (both desktop
and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to make tests for plannerShared, some qt-models must
be linked, and due to the fact that commands are currently not
available for mobile (which also makes the tests) and #ifdef must
be added.
The test version of diveplannermodel will be specially compiled in
(SUBSURFACE_TESTING set) in the tests directory.
Signed-off-by: Jan Iversen <jan@casacondor.com>
add diveplannermodel to GENERIC instead of DESKTOP
as a consequence other models are need, move those
from DESKTOP to GENERIC
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commands (undo) are not available for mobile, but diveplannermodel
is needed
add #ifndef MOBILE around Commands::
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use std::equal_to instead of lambdas that compare two dive pointers.
One could argue over which version is more readable. For whatever
it's worth, std::equal_to is more compact and expressive.
This removes an old erroneous comment that stated that std::equal_to
is only available since C++14.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
LOG_STP is on longer providing the data needed, since a lot of the startup
is indirectly in QML, furthermore using the xcode project and running profiler
gives much more detailed information
Signed-off-by: Jan Iversen <jani@apache.org>
On desktop, resetting the model is realized by generating a new
model object. This is due to the fact that we have two different
models (tree and list) and for switching between those, we have
to create a new object.
On mobile, currently there are no plans to support the list-mode.
Therefore, there is no reason the recreate the object. Instead,
implement a reset() function that reloads the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTripModelList forgot to collect the changed dives
when resetting the filter. Fix that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Updating the filter can lead to changes of the current dive.
Keep the UI in the know by re-initializing the selection.
This is not optimal, because the whole selection is reset,
but the pragmatic thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This part of the code had that horrible pattern, where reseting
the model would invalidate all pointers to the DiveTrip model.
Internalize these complexities in the MultiFilterSortModel.
All accesses are now performed via that proxy model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The UI talks to the filter model. Therefore route clearing of
data through that model instead of accessing the source model
directly.
This will allow us to remove the DiveTripModel::instance()
function and makes control flow less "jumpy".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code called directly into the DiveListModel. Instead,
send a signal and hook into the signal from the model. This
will allow us to remove the DiveListModel::instance() function.
This, in turn, is a step towards supporting multiple models
at the same time. However, currently the model manually
sets the hidden_by_filter flag in the core and therefore
only one active model is supported at a time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the caller is responsible for not reusing a freed
weightsystem / cylinder or resetting the description field to
null. This is very unfriendly. Set the description field to null,
because that allows us to call free_* repeatedly on the same
object. Use the new behavior to make the weightsystem model code
a bit cleaner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since changes to the weight model are not modal anymore, nobody
queries the changed-flag. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the EditWeight undo command. Since there is common code
(storage of the old weight), this creates a common base class for
RemoveWeight and EditWeight. The model calls directly into the undo
command, which is somewhat unfortunate as it feels like a layering
violation. It's the easy thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The WSInfoDelegate (weight-system-info delegate) is used to display
a combo box of known weightsystem-types and auto-fills the weight if
the weightsystem-type is changed.
This would overwrite the weight data of the displayed dive when the
user hovers over the different entries. Moreover, it saves the original
weight in case the user cancels the editing action.
This is not viable when implementing undo of weightsystem changes,
because hovering over entries should not produce individual undo
commands. Instead, implement a special "temporary" row in the
weightsystem model. On canceling of the edit actions, simply reload
the weightsystem from the unmodified dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make things more future-proof, introduce an empty_weightsystem
constant. Replace explicit aggragate initialization of empty
weightsystems by this constant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Before undoization, the WeightModel could be out-of-sync with
the actual dive and therefore had a row member variable. This
became redundant. Therefore, remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is only one caller of WeightModel::weightSystemAt() and that
certainly does not need a pointer into the weightsystem-table of
the current dive. Return a value type instead of a pointer.
This allows us to mark WeightModel::weightSystemAt() as const and
use it from WeightModel::data(). Slightly cleaner code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more complicated than weight adding, because the
multiple-dive case is not well defined. If multiple dives are selected,
this implementation will search for weights that are identical to the
weight deleted in the currently shown dive. The position of the weight
in the list is ignored.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When connecting a model to the TableModel class, it would connect
clicking on an item to the remove() slot of the model.
This breaks the program flow implied by the undo code:
Ui --> Undo-Command --> Model --> UI
Moreover, the naming of the remove() slot is illogical, because
clicks can also have different effects, as for example in the
cylinder-table.
Therefore, move the connect() call from TableModel to the
callers. In the case of TabDiveSite, move the remove() function
from the model to the TabWidget, where it makes more sense.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce an AddWeight undo command. This is modelled after the
numerous dive-edit undo commands. The redo and undo actions are
connected to the WeightModel via two new signals, weightAdded
and weightRemoved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The WeightModel always acted on the displayed dive. To support undo
of weightsystem changes, operate on an arbitrary dive. This is
in line with other models, where the updateDive() function resets
the model to represent a certain dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView caught signals from the DiveTripModel
with the corresponding indexes. However, the DiveListView
is actually connected to the MultiFilterSortModel and
thus has to translate the indexes.
Instead, catch the signals in the MultiFilterSortModel,
transform them and resend. Let the DiveListView get
its signal from the MultiFilterSortModel.
Yes, this makes things less efficient because there is
an extra signal. On the upside, the makes data-flow much
more logical. Selection will have to be fixed anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The goal here is to unify desktop and mobile by moving
selection code from the desktop-only view.
Currently, initialization of the selection still has to be
called from the view after connecting the appropriate signals.
This is due to the weird way in which create completely new
models when resetting them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-trip models now send changed-events if the shown-status
changed. Thus, there is no reason to fully reset the filter on
filter changes.
Simply tell the filter that it has to react to changes of SHOWN_ROLE.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to the tree-model send signals when dives change
their shown status in the list-view. Do this in two passes
(collect changes; send changes) to be able to reuse the
already existing functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Send signals if the shown-status of top level items changed.
Do this in two passes to be able to use the previously created
function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To avoid having to do full filter reloads, send dive-changed signals
for dives in trips when the shown-status changed. But only for trips
where not all dives are hidden. Because for those, the plan is to
hide the trip as a whole.
Implement the signal sending in its own function so that it can be
reused for top-level items and the list-view.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implementing proper model semantics (only sending a changed
signal for items that actually changed) will be somewhat
complicated. Therefore, move the filtering of trip-items
to its own function to make the nesting a little bit less
deep.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Change the remove() function of the cylinder and weight models
to take the index by value. The code used to take it by reference
and the reference would be invalidated when removing rows from
the model!
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListModelBase::clear() implementation was flawed: It cleared
the data in the core, but left the data in the model untouched.
The code was relying on the fact that the caller would reset the
model manually. Not a good idea.
Therefore, clear the internal data to keep the model consistent at
all times.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way this was accessed via Qt's model semantics was horrible.
This gives arguably more readable code, since we don't have to
shoehorn things through QVariants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split out the actual filtering from the MultiFilterSortModel.
Create a DiveFilter class that does the actual filtering.
Currently, mobile and desktop have their own version of this
class, though ultimately we may want to merge them.
The idea here is that the trip-model and undo-commands have
direct access to the filter-function and thus can take care
of keeping track of the number of shown dives, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter-model was catching dives-added / dives-deleted signals
from the models to keep track of the number of shown dives.
To simplify the data flow, do this directly in the undo-command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We mark hidden/shown dives in the core but store the number
of shown dives in the MultiFilterSortModel. Move this datum
to the core for improved locality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce a DiveTripModelBase::clear() function that cleanly
clears all dive data inside a beginResetModel()/endResetModel()
pair. Thus, the UI will be cleanly reset and we can remove
explicit calls to
- graphics->setEmptyState()
- mainTab->clearTabs()
- mainTab->clearTabs()
- diveList->reload()
from MainWindow::closeCurrentFile().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit did the "right" thing by implementing Qt mode semantics
as intended, but for unknown reasons the profile is not properly
cleared on close-file anymore. This code is so convoluted that there
is not point in fighting it at the moment. Revert to remove-rows
instead of reset-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveTripModelTree::topLevelChanged() has pretty complex code, as
it has to handle the fact that when adding/removing a dive from
a trip, the trip can change its position.
The code did not account for the fact that when moving an object
back in the top level list, one has to subtract one from the new
index, because the object was removed somewhere in the front of
the list.
To make matters worse, when an entry stayed where it was, this
was realized by moving the entry right behind itself, which of
course means that it stays where it is. But this meant that in
the by far most common case (no moving) the wrong entry was
updated.
Fix this by subtracting 1 from the new index when moving an
entry to the back.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To test whether an entry is a trip, we passed a pointer to the
trip through a QVariant and tested that for null-ity.
Passing pointers through QVariants has given us myriads of
problems in QML, therefore introduce a bool IS_TRIP_ROLE
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In qt-models/cylindermodel.cpp the various formatting functions
can take a pointer-to-const cylinder. Thus, the data() function
can likewise treat the cylinder as const - as it should.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some widgets copy the full plot info. Free these data on exit to
prevent monstrous valgrind reports.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All accesses to the pressure data were converted to use functions.
Therefore it is now rather trivial to dynamically allocate the
pressure array and just change the functions.
The only thing to take care of is the idiosyncratic memory
management. Make sure to free and copy the buffer in the
appropriate places.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The model was accessing the pressure data directly. Instead,
use the accessor functions so that the core structure can
be changed more easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When keeping track of cylinder related data, the code was using
static arrays of MAX_CYLINDERS length. If we want to use dynamically
sized cylinder arrays, these have to be dynamically allocated.
In C++ code, this is trivial: simply replace the C-style arrays
by std::vector<>. Don't use QVector, as no reference counting or
COW semantics are needed here. These are purely local and unshared
arrays.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_gas_used() returns the volume of used gases. Currently,
an array with MAX_CYLINDERS is passed in. If we want to make the
number of cylinders dynamic, the function must use an arbitrarilly
sized array.
Therefore, return a dynamically allocated array and free it
in the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is even harder because setActiveTrip is called from an action slot from
QML. If the C++ code called from that slot causes the object to which this slot
belongs to be destroyed, we get very strange crashes. The only workaround I
could come up with was to update the filter asynchronously.
This all seems very ugly and fragile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't be necessary every time we replace the sort model,
but it can't hurt, either (famous last words?).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one significantly reduces the number of dives that are handed to the
ListView in QML. For every trip that isn't expanded (only zero or one trips are
expanded at any time, so almost all the others are collapsed), send only first
dive to the View to allow creation of the section. Hide the rest so we don't
have all these invisible, zero height entries for the vertical dive list.
A big part of this commit is moving a few functions from the DiveListSortModel
to the CollapsedDiveListSortModel. Those are the ones that are needed for the
trip header.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When computing the best mix for a target depth, for helium, one
can either require that the partial pressure of N2 is the same
as at the target depth or the partial pressure of N2 plus O2.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The current code of course works just fine. But there's a risk someone might
add something to one of these cases and not realize that there is an implicit
fall through going on. This is cleaner.
Found by Coverity. Fixes CID 350079
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is extremely unlikely to ever happen since we reserve space for a
hundred weight models, but hey, doing this right is quite easy, so let's
fix it.
Found by Coverity. Fixes CID #350117
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of copying the displayed dive, generate an undo command.
This makes the replanning an undoable action and fixes a bug
where the dive details have not been updated correctly.
Fixes#2280
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a couple more roles and remove the dive role that allows accesss to
the DiveObjectHelper in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By getting a DiveObjectHelper and then dereferencing that we ended up
creating hundres and hundreds of these objects, only to immediately
destroy them after using a tiny part of the data.
Instead make those data available directly from the model, without
having to create a DiveObjectHelper forst.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner has a computeVariations() function that can be run
in a worker thread. The code was not thread safe: a deco_state
object allocated on the stack of the caller was passed down to
the worker thread. It's well possible that the object would go
out of scope before the thread run.
Therefore, when running in the background, copy the object first
and free it in the worker thread.
Side note: Qt makes proper memory management again as difficult
as possible: You can't pass a std::unique_ptr<> to QtConcurrent::run,
because move-only objects are not supported. Not very friendly!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This guarantees that they are actually singletons: there can
only be one application-wide instantiation of these objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make this class available from QMLManager, the run_ui()
function would create the object and then set a pointer in
QMLManager. It works, but is inconsistent with the rest of
the code. Therefore, make it a classical singleton class,
which is generated on demand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
GpsListModel was one of those "special" singletons that could
be created explicitly with new. This would make sense if a
parameter were passed to the constructor. We only passed null,
so one might as well turn that into a classical singleton with
default constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListModel was one of those "special" singletons that could
be created explicitly with new. This would make sense if a
parameter were passed to the constructor. We only passed null,
so one might as well turn that into a classical singleton with
default constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The model was initialized in the global run_ui() function.
Move that into the constructor of the class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveImportedModel::recordDives() called add_imported_dives(). But that
actually consumes the dive and dive-site tables. Which in turn will
lead to an inconsistent model.
Properly reset the model by using the consumeTables() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveImportedModel and DownloadThread used the same table
of dives and dive sites. This made it very hard to keep the
model consistent: Every modification of the download thread
would make the model inconsistent and could lead to memory
corruption owing to dangling pointers.
Therefore, keep a copy in the model. When updating the model,
use move-semantics, i.e. move the data and reset the tables
of the thread to zero elements.
Since the DiveImportedModel and the DownloadThread are very
tightly integrated, remove the accessor-functions of the
dive and dive-site tables. They fulfilled no purpose
whatsoever as they gave the same access-rights as a public
field.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plan is to make the model the authoritative source of
the imported dives. Therefore, access the number of
downloaded dives from there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing dives, consume the tables from DiveImportedModel
and not the DownloadThread. This appears more logical and avoids
an inconsistent state of the DiveImportedModel: On import the
tables would be reset, but the DiveImportedModel wasn't
informed of that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveImportedModel::deleteDeselected(), unselected dives were
deleted from the dive-table. But this left the model in an
inconsistent state and the frontend was not informed of the
missing dives.
Fix this by invoking the appropriate beginRemoveRows()/
endRemoveRows() pairs. Move the functionality into its
own function so that it can be reused by the desktop version.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, desktop and mobile are accessing the DownloadThread
and the DiveImportedModel concurrently. This makes a big data
flow mess. To achieve a more hierarchical data flow, start
by making the DownloadThread a subobject of DiveImportedModel.
Start the download by calling a function in DiveImportedModel.
Route the finished signal through DiveImportedModel. Thus,
the model can reload itself with the new data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to apparent QML breakage, a model-reset leads to the DiveDetail
page being reloaded for every dive in the list(!). Therefore, add
rows instead.
This leads to extremely subtle code, as it is now imperative that
the model has been properly cleared beforehand. Nevertheless, for
now we have to do this to fix a severe performance regression.
Fixes#2295
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearing the dive data directly in the core leaves us with an
inconsistent model. Therefore, clear via the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the GpsLocation singleton in GpsListModel::update()
to extract the gpsTrackers, pass the gpsTrackers as function argument.
The caller has direct access to the GpsLocation object anyway and this
make things less entangled.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of converting the section-heading string to a trip-pointer
in QML and pass that to the tripTitle() and tripShortDate()
functions, pass the string and convert in C++ code.
Hopefully, this makes the code more robust.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The section heading in the QtQuick ListView has to be a string.
Therefore, we passed a pointer formatted using hexadecimal notation.
Later, that was converted back without being checked.
A very scary proposition, so let's pass unique integer trip-id instead.
This means that on converting back we have to scan the trip table,
but that is a very minor cost comsidering to the gained robustness.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In MultiFilterSortModel::startFilterDiveSites(), the setting of the
dive sites to be filtered is done later in the code. Therefore,
remove the assignment in the first line of the function. Under
some circumstances, this would prevent a needed map reload!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of looping over all dives and search the dive with the given
id, let the source model determine the index and map that. Thus,
we do only one mapping and don't generate a ton of DiveObjectHelpers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Accesses were via DiveObjectHelpers. Provide a direct access to
struct dive *. Use this for the filter - there is no point in
mass generating DiveHelperObjects in the filter code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveListModel::data() a DiveObjectHelper was created for any
data-access. Create it only when a DiveObjectHelper is actually
returned.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since DiveListModel does not keep its own list of dives anymore,
insertDive() doesn't use the DiveObjectHelper argument. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The clear()/addAllDives() pair was bogus as the former didn't
clear the model (this is not possible anymore - the model
represents the core dive list) and the latter readded all
dives again.
Replace this by a reload() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of keeping track of a list of DiveObjectHelpers, generate
them on-the-fly in DiveListModel. Thus, there is less danger of
model and core getting out of sync. On the flip-side, now the
DiveListModel and the DiveListSortModel might get out of sync.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveObjectHelper is a tiny wrapper around dive * to allow access
to dive data from QML and grantlee. It doesn't have to be a
full-fledged QObject with support for signals, etc. Therefore,
turn it into a Q_GADGET based object. This allows us passing the
object around as object, not as pointer to DiveObjectHelper.
This makes memory-management distinctly easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't want to generate a DiveObjectHelper numerous times for
every item in the dive list. Therefore, return this data directly
from the model. In this case, don't remove from DiveObjectHelper,
as these data might be used by grantlee templates.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't want to generate a DiveObjectHelper numerous times for
every item in the dive list. Therefore, return this datum directly
from the model. In this case, don't remove from DiveObjectHelper,
as this datum might be used by grantlee templates.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't want to generate a DiveObjectHelper numerous times for
every item in the dive list. Therefore, return this datum directly
from the model. In this case, don't remove from DiveObjectHelper,
as this datum might be used by grantlee templates.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't want to generate a DiveObjectHelper numerous times for
every item in the dive list. Therefore, return this datum directly
from the model. In this case, don't remove from DiveObjectHelper,
as this datum might be used by grantlee templates.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't want to generate a DiveObjectHelper numerous times for
every item in the dive list. Therefore, return this data directly
from the model. In this case, don't remove from DiveObjectHelper,
as these data might be used by grantlee templates.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We don't want to generate a DiveObjectHelper numerous times for
every item in the dive list. Therefore, return this datum directly
from the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The canonical way of displaying lists in Qt is via models.
Thus, return the tripId directly from the DiveListModel instead
of going indirectly via a DiveObjectHelper. In the future, this
will allow us to make the DiveObjectHelper value-based, as it
is not generated numerous times for every list item.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These properties are not needed anymore, because the full text search
was decoupled from the DiveObjectHelper.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The full text search was looping over the DiveListModel when
it could simply loop over the core model. Do that instead.
2) Don't generate a DiveObjectHelper to do a full text search.
Currently this is harmless as the DiveObjectHelper is only
a disguised "dive *". But from a conceptual point of view,
it represents the full representation of a dive and we don't
want to generate that in a tight loop.
This will help in
1) Making the DiveObjectHelper a non-reference object.
2) Moving fulltext search to the core and thus making it available
to desktop and more performant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There used to be code to remove the old planner notes when replanning
a dive. It used a global variable and seemed rather brittle. Moreover,
the place that set the global variable was inadvertently removed.
Therefore has been effectively dead code.
Reimplement the functionality, but be more robust by considering
that the deco-type may have changed: Split the translated disclaimer
string in two parts, before and after the "%s" place-holder.
Search for these two parts. Remove the disclaimer and everything
after the disclaimer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
"Roles" is a C-style enum (i.e. not C++-style enum class). Since that
means that the names spill into the outer namespace, the names
themselves are prefixed with "Role". Nevertheless the code qualified
the names with "Roles::". This is redundant and unnecessary.
Remove this redundancy to show that we understand how the language
works.
Note: we could also transform the enum into an enum class and remove
the "Role" prefix from the names. That would arguably be "cleaner",
but then the enum doesn't auto-convert to/from int, but Qt uses int
to pass the roles to functions. So let's go the simple way that
avoids casting.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this is no longer a Q_METATYPE, nobody will try to
default construct this object. Remove the default constructor
and guarantee that there will be no null divesite.
Of course, the lack of default constructor means that the
default argument to the "selected" member variable should
be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Let's face it: this is a value type. No point in having Java-style
getters and setters. Replace by plain old and boring member variables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Nobody was listening for that signal. Remove it. This, quite
obviously, makse the setCoordinateNoEmit() function redundant.
Merge with setCoordinateNoEmit().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We never dish out an object of this type to QML. It is unclear how
Q_PROPERTIEs could be of any use.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently we changed the MapLocationModel-items to store whether
they are selected. Thus, we can directly export an isSelected
flag instead of calling a function taking a dive-site argument.
1) This makes the QML easier to read.
2) This avoids passing pointers through QML which has caused
us lots of pain.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To connect a model to QML, one is supposed to provide a
QHash<int, QByteArray> MapLocationModel::roleNames()
function that returns a role -> attribute-name hash.
That was realized by filling the hash in the constructor,
storing it as a member variable, using static strings that
were declared in the class-definition and defined in the
translation unit.
Adding a new role was a pain and the whole thing was totally
pointless as the attribute names were used nowhere else and
the roleNames() function is called only once.
Simply do, what we do everywhere else: initialize the hash
in the roleNames() function and use normal string literals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing the dive site, for certain fields a divesChanged signal
was emitted so that the dive-list can be updated.
Arguably it is wrong to decide which fields are relevant to the
dive list in the undo-command code. Therefore, let the list
catch the dive-site-edited signal and decide itself.
But the actual reason for this commit is that if the dive-site
field of a dive changes, we might have to reload the dive-location-model
because suddenly a new dive site appears. Now if this is done
in QML context on some Qt version (notably 5.9) we get crashes
later on. But that can happen if the user moves a flag. So in that
case only send a diveSiteChanged signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since changing the highlighting to use the selected dive, dive
sites with no dive were never highlighted in dive site mode.
Obviously, because there was no dive to be selected.
Therefore special-case all dive-site selection code to recognize
when we are in dive site mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since selection change doesn't to a full map reload, we have to
reload the map on filter changes, since the shown dive sites change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since not fully reloading the map on selection change,
the selected sites were not moved to the top. Not calculating
the z-value in QML, but making it a simple model property
helps.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking a dive site on the map, the QML code would set
the selected dive site, but then all dives of dive sites in
the vicinity were set. But still only the clicked-on dive site
was shown.
Therefore, don't set the list of selected dive sites in QML,
but later in DiveListView::selectDives(), where we know all
the dives that were selected.
This, again, gives nasty entanglement of diverse widgets and
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the selection the MapLocationModel was reset.
This lead to crashes on Qt-5.9 which are due to QML accessing
data that was freed during model reset. This putative Qt bug
doesn't happen on newer Qt versions. At least Qt-5.12 is known
to work.
Instead of fighting the bug, let's simply not reset the model
but send a dataChanged() for every element of the MapLocationModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Experimentation has shown that the image of a flag will
only be changed after dataChanged() if it is a simple
property. The old code had a complex QML expression and
then - for some reason - it didn't work.
To give us better control over the flags and avoid full
reloads of the map therefore introduce a model-property
pixmap name. The name depends on whether the site is
selected and if not, whether we are in divesite-edit mode.
This makes the code rather convoluted. Firstly, we have
to save whether the site is selected in the map-item.
Secondly we have to access the global map-widget, which
in turn has to go to the map-widget helper (layering
violation!).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When clicking on a flag
1) The QML would call MapLocationModel::setSelected() with
fromClick = true
2) MapLocationModel::setSelected() would emit a signal
selectedLocationChanged()
3) MapWidgetHelper would catch that signal and do the actual
processing.
Other functions would call MapLocationModel::setSelected() with
fromClick = false, which would not emit the selectedLocationChanged()
signal.
Detangle this a bit by calling the selectedLocationChanged() function
directly from QML and remove the fromClick parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Just to be sure, refuse to add null divesites to the selection.
Moreover, refuse to call the setSelected function on a null-divesite.
I got an unfriendly Qt-Warning there:
"Passing incompatible arguments to C++ functions from JavaScript is
dangerous and deprecated."
"This will throw a JavaScript TypeError in future releases of Qt!"
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The create_plot_info_new() function releases old plot data. This
can only work if the plot_info structure was initialized previously.
The ProfileWidget2 did that by a memset, but other parts of the code
did not.
Therefore, introduce a init_plot_info() function and call that when
generating a plot_info struct. Constructors would make this so much
easier - but since this is called from C, we can't use them.
Fixes#2251
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Indexes go from 0 to count - 1. Thus, the comparison for invalid
indexes has to read ">= count", not "> count".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There have been crash reports in DiveSiteSortedModel::allSiteNames().
The only conceivable reason that this crashes is that the core knows
about more sites than the model and therefore on mapToSource() we
get an invalid index, which is translated to -1. Accessing the name
of that dive site will crash.
Handle such invalid indexes gracefully.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The fill_default_cylinder() function calculated the MOD based
on the currently displayed dive. This does not seem to make sense:
- When importing dives, why would we care about the altitude and
salinity of the currently displayed dive, possibly from a different
trip.
- The planner is supposed to be thread-safe and should not touch
global variables.
Of course this means that the importing-functions have to fill
out altitude and salinity before creating the default cylinder,
but this is their problem. For a freshly created dive they will
get the default values, which still seems less random than the
values from the displayed dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 0c38754916 introduced a
bug in MapLocationModel::reload() by setting an entry in the
name-to-location map before the location was initialized.
Move the setting of the map entry back where it was before:
after the assignment of the location variable.
Moreover, define the location variable directly on allocation
of the location to avoid thus bugs in the future.
Why did we not get a "might be used unitialized" warning
anyway?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When pressing F2 in the dive list, the number can be edited.
Make this action undoable by implementing a EditNumber command.
This command is differs from the other undo commands, as not the
currently selected dives are changed. This means that the EditCommand
needs an alternative constructor taking a single dive. This constructor
was implemented in the base class so that all edit commands can now
be called with a single dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Another tiny step in making dive.h smaller: move function
declarations to deco.h if these functions are defined in deco.c
and don't directly concern dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
qt-models/models.h included dive.h and divelist.h. Remove these
unnecessary includes, to reduce interdependencies. A drop in the
bucket, for sure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For historic reasons, there where three distinct signals concerning
dive-selection from the undo-machinery:
1) divesSelected: sent newly selected dives
2) currentDiveChanged: sent if the current dive changed
3) selectionChanged: sent at the end of a command if either the selection
or the current dive changed
Since now the undo-commands do a full reset of the selection, merge these
three signals into a single signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some commands tried to retain the current selection on undo/redo,
others set the selection to the modified dives.
The latter was introduced because it was easier in some cases, but
it is probably more user-friendly because the user gets feedback
on the change.
Therefore, unify to always select the affected dives on undo()/redo().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the default view is batched by trips, signals were sent trip-wise.
This seemed like a good idea at first, but when more and more parts used
these signals, it became a burden. Therefore push the batching to the
part of the code where it is needed: the trip view.
The divesAdded and divesDeleted are not yet converted, because these
are combined with trip addition/deletion. This should also be detangled,
but not now.
Since the dive-lists were sorted in the processByTrip function, the
dive-list model now does its own sorting. This will have to be
audited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have a very fundamental problem with data-duplication in
core and qt-models. In a particular case, this led to an easily
reproducible crash:
1) An undo command moved the last dive of a trip to another.
2) When an undo-command removed the last dive of
a trip to a different trip, the dive was removed from the
trip in the core. Then, the model was updated.
3) That lead at first to a rearrangement of the trips, because
the trip with the added dive is moved before the trip with
the removed dive.
4) In such a case, the filter-model checks the visibility of
the trip.
5) Since the trip with the removed dive has no dives in the core,
visibility was determined as false.
6) From this point on the mappings of the QSortFilterProxyModel
were messed up. Accesses led to crashes. It is unclear
whether this is a Qt bug or only a QOI issue.
As a quick-fix, cache the visibility flag of trips directly
in the Qt-models. Don't set the visibility directly in the
core, but go via the Qt-models. Thus, a more clear layering
is achieved.
In the long run, we can hopefully get rid of the data-duplication
in the models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is this anti-pattern in QModel data() functions to assign
to a "ret" variable and return at the end of the function. This
is inefficient, as the object is not directly constructed at
the space reserved by the caller.
Change the functions in WeightModel and CylinderModel to return
the objects directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make dive.h a bit slimmer. It's only a drop in the bucket - but at
least when modifying tag functions not the *whole* application is
rebuilt anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is just minor fixes that are not user-visible:
Fix a few erroneous comments and a debug message. These are
copy & paste mistakes and mistakes introduced during code-
refactoring.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At some places we use UTF8 string literals. Therefore, we effectively
only support UTF8 build systems. We might just as well remove all
the other UTF_* macros and use direct string literals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, dive site names are only updated on full reload.
Instead hook directly into the corresponding signal in the
MapLocationModel to set the name. Also to the coordinates
directly there instead of going via the MapWidgetHelper.
In the MapWidgetHelper, just center on the changed dive site.
Hook into the signal directly there and remove the slot
from the MapWidget. This makes the whole call-chain at least
one call shorter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the code to add the first selected dive site from
MapWidgetHelper::enterEditMode() to MapLocationModel::reload().
Thus, the list of sites is built only at one place. For this
it is necessary to pass a pointer to the map, so that new
dive sites can be added at the center of the map.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of looping over the dive table and extract dive sites,
loop over the dive site table.
This makes it possible to show dive sites that have no dive
associated with them.
But we have to create to functions that check whether a dive
site has any shown dives or has any selected dives.
Moreover, change the code to add near dive sites of the same
name if in edit mode. Other wise (erroneously added?) dive
sites with the same name cannot be moved on the map.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Invalidating the filter can cause numerous selection-change notifications.
These cause a full UI reload. Therefore, go into "command" mode that was
implemented for the undo commands. Then, all selection-changes are
considered as "programmatical" and ignored.
At the end of filter invalidation, a filter-finished signal causes a
proper reload anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When switching between the dive-site-table to the dive-site-edit
tabs, the filter would be set to a dive site. Usually, this would
be the same dive site as before. Nevertheless, this caused a full
map-reload. Detect if the dive-sites to be filtered are the same
and turn this operation into a no-op.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-site-edit and dive-site-table tabs both put the filter
into a special dive-site mode. When switching between both, it
could happen that the one got its show befor the other got
its hide event.
Thus, the first would start dive-site filtering and the second
stop it. Now the app was not in filter mode even though it should.
To solve this problem, add reference counting for the filter's
dive-site mode. In both tabs call the enter/exit functions
on show/hide. In the dive-site-table tab, when the selection
changes, use a set function that doesn't modify the reference count.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When dive sites are edited, we shouldn't highlight the sites
of the current dive, but the currently edited site(s).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the dive-site-filter is active either on the dive-site-edit
page or the dive-site-list page, use that as the flag for dive-site-edit
mode. Moreover, when the filter is reset, the
MapWidgetHelper::reloadMapLocations() function is called, so we
can use that place to enter/exit edit mode.
This makes it easier to keep everything consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If multiple dives are selected, highlight all corresponding sites.
For that, replace the MapLocationModel::m_selectedDs pointer by
a QVector<>. Fill the vector in MapLocationModel::reload() and
add a isSelected() member function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map model keeps track of the dive site positions on the
map. Therefore, it seems more logical to have the code calculating
the map position in the model, not in the helper-class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When on the dive site tab or editing a dive site, we want
to show all dive sites so that the user can related different
dive sites. Therefore export a "in dive site mode" flag from
the filter model and don't filter in that case in MapWidgetHelper.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Creates the dialog box to select which sites to import from the file
selected in mainwindow.cpp. The DivesiteImportModel is created as a
table to display and select which sites are to be imported. Once the
sites are selected, the Command::importDiveSites command is called to
add the sites to the core dive site table with undo/redo functions.
Signed-off-by: Doug Junkins <junkins@foghead.com>
- Use a beginResetModel()/endResetModel() pair instead of distinct
addRows / removeRows pairs.
- Reuse the update function in the constructor().
- Let "rows" be the number of rows, not the number of rows minus one.
- Remove updateInfo() function as it does the same as update().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- Use a beginResetModel()/endResetModel() pair instead of distinct
addRows / removeRows pairs.
- Reuse the update function in the constructor().
- Let "rows" be the number of rows, not the number of rows minus one.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TankInfoModel and WeightInfoModel had biggerString() functions
to determine the correct column widths for the tank- and weight-type
columns. The users were removed around 2013. Remove these functions
and the corresponding member variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit adds an entry to the dive media context
menu which offers to write a subtitle file. This
creates an .ass file for the selected videos.
In an attempt to to clutter the screen too much, don't
show irrelevant entries (zero temperature or
NDL and show TTS only for dives with stops).
VLC is able to show these subtitles directly, they
can be integrated into the video file with ffmpeg.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The only external caller of add_single_dive() used it to append a
dive to the global dive list. Rename the function accordingly and
remove the index parameter.
The internal caller can use the local insert_dive() function, which
doesn't consider selection. That shouldn't be a problem, as the
caller is doing import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When in dive site tab and some dive sites are selected, show only
dives at those sites. Simply read the selection and pass it to the
filter.
Start and stop filtering when switching to and from the tab,
respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the edit-dive-site tab the filter is switched to a particular
mode where only dives at that site are shown.
If we want to reuse this for the dive-site tab the mode has to
be extended to allow for multiple dive sites. This is trivially
done by replacing a pointer by a vector of pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of sending a signal when counts change, catching them
in the filter widget and update the window title there,
directly update the window title in the model. This removes a
signal/slot pair.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>