This seems like the easiest way to show the state without disrupting the UI
elsewhere. Directly below the email address used for cloud storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI is ugly, and of course this is hidden in the developer options that have
to first be enabled in the advanced settings. As I mentioned in the previous
commit, I believe the actual risk that something gets damaged here is very low,
but still, explaining this so it makes sense to the casual user may be a bit...
difficult.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Every time I edit main.qml, QtCreator fixes this for me. And then I filter it
from the commit to not mix white space and actual changes. So let's just get
this fixed and move on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On startup, we showed progress of the population of the fulltext
and listmodels for every 100th dive. This worked by overwriting
the last line if the new line started with '\r'. Since we don't
do that anymore, we can remove this special case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way the launch screen is shown significantly shorter on a device,
and instead the user sees our progress notifications.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This test makes no sense on other platforms (and the log file text is
frankly confusing when not running on Android).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Until the app is initialized, we have problems getting the 'floating'
passive notifications to show up and be useful. Instead update the user
by filling a text block on the otherwise empty initial page of the app.
Delay the switch to the dive list until the app is initialized and then
use the passive notifications again. While we are initializing also show
a busy spinner so the user doesn't think the app is hung.
As a side effect of this change, the dive list isn't shown until our
models are initialized. And strangely this causes every single possible
delegate to be instantiated. We can prevent that by not setting the dive
list model until after we are done setting up the model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are two places where we try to prevemt unintended app exits.
Once, in the onBackRequested signal handler on the dive list. This was
missing special handling for the situation where one of the drawers was
open.
The second place is the onClosing signal handler in main.qml. Naively I
thought that this was enough to catch all cases where we were about to
exit the app, but apparently an explicit manager.quit() is a bit too
forceful and doesn't get to that signal handler.
With this commit we check for open drawers in both places. Belts and
suspenders, I guess.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
An Android user might reasonably assume that they can use the back button to
close the global or context drawers. So act accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We still used pageStack.push() all over the place.
Also, in showPage, disable the map hack if the user actively picks a
different page.
This should fix an issue where the user picked the map and then tried to
add a dive to the dive list - and instead of the dive edit was shown the
map again.
Reported-by: Hartley Horwitz <hhrwtz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I would love to figure out a way how to bundle the user manual and load
it from the device file system, but in the meantime this should continue
to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The number of possible sequences of events when the user is connecting a
USB device is rather surprising. These changes try to ensure that in
every case we get USB connection information we do in fact show the
correct (or best guess) connection.
See #2686
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we explicitly open the download page after the use plugged in a USB
device, don't try to use guesses from the BT/BLE pairings to populate
the device/connection dropdowns.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a merge error in the dive list rewrite and brought in a code block that
had moved, which caused issues with correctly switching to the dive list.
Calling setupActions() moves to the diveListView (where it really belongs).
Instead of messing with the visibility of components of the same page, we now
simply switch out the shown page.
Fixes#2667
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now this only shows the trip details. They can be edited on the page, but
there is no way to save those edits, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default policy closes the context drawer if there is a button release
outside the context drawer area. That messes with the intended UI. For us a
much more useful behavior is to have the next click outside of the drawer close
the drawer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't perfect yet, but it looks fairly reasonable.
This commit was mainly written by Dirk, but includes a few fixes from Berthold
which where squashed into this commit as they really should have been part of
the initial version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I experienced weird crashes that seemed timing-related when
using the filter. Therefore, remove the multi-threading thing.
So far no more crashes, but keep a close eye on that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the 'GPS' entry to be called 'Location', moves the 'Map' entry
below that, and reuses the map icon for both the map inside this submenu and
for the main menu item.
It moves the 'About' entry under 'Help' and both 'Export' and 'Dive summary'
under 'Dive management'.
This way we have only five (or with 'Developer' enabled, six) entries in the
main menu making it much more appropriate for really tiny screens.
Additionally, the entrieis moved into sub-menus are ones that are not all that
commonly used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also deals with a bug we had before where we didn't re-start the calculation
for the various sizes from the assumption of 'at least 21 grid units'. Now you can
rotate the device and the right thing will happen.
Small warning - this checks the orientation of the screen, which is exactly what
you want it to do on your device. When running mobile on desktop this may not be
what you expect. Even if the window has a portrait aspect ratio, your screen is
likely still landscape... so testing this feature in mobile on desktop mode is a
bit harder...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still is way to fragile. Ordering of object completion doesn't appear
consistent. Hopefully bringing the properties all into one (now reasonably
named) object will help.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't expect this to be complieted. I'll keep it in the tree
for the moment, but expect to remove all of the related code
eventually.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move initialWidth/initialHeight out of subsurfaceTheme to placeHolder,
this secures no change in behaviour.
Signed-off-by: jan Iversen <jan@casacondor.com>
fontMetrics is no longer used in production code, but still in the theme test
page.
Isolate fontMetrics in ThemeTest page.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move setting of font properties used throughout to themeInterface.
Add new settings "currentScale".
The properties are kept in main (subsurfaceTheme) in order not to do
a big search/replace.
Update settings to use currectScale and signal changes in themeinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Check defaultfont and calculate basepointsize in themeinterface instead
of in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update Settings to use ThemeNew (for theme change)
Reduce subsurfaceTheme in main
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace CloudStatus.<value> with backend.<value> as part
of making enum sharing between C/C++ and QML more robust.
Replace PrefCloudStorage.verification_status with
backend.verification_status to use the strongly typed function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add missing colors so that dark theme contains the
same colors as "colors in use".
Update the darkTheme() to correctly copy colors from
pink theme
Signed-off-by: jan Iversen <jan@casacondor.com>
add missing colors so that pink theme contains the
same colors as "colors in use".
Update the pinkTheme() to correctly copy colors from
pink theme
Signed-off-by: jan Iversen <jan@casacondor.com>
add missing colors so that blue theme contains the
same colors as "colors in use".
Update the blueTheme() to correctly copy colors from
blue theme
Signed-off-by: jan Iversen <jan@casacondor.com>
move contrastAccentColor, lightDrawerColor
to block of used colors in order to avoid confusion.
move darkDrawerColor to dark theme.
Signed-off-by: jan Iversen <jan@casacondor.com>
Remove use of prefs. (apart from instanciating the object) in
main.qml
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the divelist is only visible if online/offline (CS_VERIFIED/CS_NOCLOUD),
there is no need to check that to enable "Add dive manually".
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
