Add one more picture to the already existing test.
This new picture is a JPEG and has data after JFIF EOI tag.
Suggested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Note that the actual validation of the result is currently disabled, so
the tests will pass even though there are some bugs and rounding errors
present.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Add automatic tests in TestPlan for minimum gas:
- Copy minimum gas result (pressure) to diveplan.
- Add cylinder size and working pressure for bottom gas to every dive in TestPlan
Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan
- Add minimum gas check for every dive
- Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank
Hint: Deco check for these new dives is commented out at the moment
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The rule was working when called from the fake test
used as preparation step in check target on Windows,
but did not work for the normal install target.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
In the original version, parsing and comparing output was
done in separate test methods. This was forbidding use of
QTest cleanup to call clear_dive_file_data().
As a side effect a failure in one test would make other tests
failing too (since call to clear_dive_file_data was skipped
by QCOMPARE failure).
Added a FILE_COMPARE macro to avoid code duplication.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
In case of QCOMPARE failure, code following the comparison
is not executed, this results in application state not being
properly resorted and often gives several test failures,
when only one test really fails.
Using QTest cleanup method allows restoring proper state,
before next test is executed.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Method originally called testSetup is more a precondition
to test execution rather than an actual test.
QTest recommends to use initTestCase for that purpose.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Expected value is the second argument of QCOMPARE,
having the arguments in the right order avoid confusion
when looking at error message in case of test failure.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Windows implementation of fwrite changes \n to \r\n
for files opened in text mode.
It caused failures in TestMerge and TestParse when
comparing written files against reference data.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Update install rules to create a staging_tests folder
for easy deployment to test target.
Update test rules for compile time testing
when wine is available on build machine.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
On Windows that would fail because stat() doesn't deal well with our
utf8 strings.
Added new subsurface_stat() portability function to replace stat().
Added Windows implementation of subsurface_stat() using wstat(),
with conversion to ut16 of the inputed path.
Other platform implementations (linux, android) make use of the normal stat().
Added non ASCII test case in TestGitStorage::testGitStorageLocal()
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Update TestGitStorage to use qUtf8Printable instead of pPrintable.
This ensures that non-ASCII chars are utf8 encoded before calling internal functions.
In windows case pPrintable returns other codepoint that depends on system settings.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Update tests with a (compile time) option SUBSURFACE_TEST_DATA,
pointing to test data base path. It is needed for cross compilation cases.
SUBSURFACE_TEST_DATA is set to SUBSURFACE_SOURCE by default,
or configurable via cmake option -DSUBSURFACE_TEST_DATA="...".
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
We do some merging in a couple of the other tests as well, but the idea
is to have specific test cases that exercise our merge logic.
This one starts simple. Merge a dive with some valid info with a second
one that has less data filled. And then try it in both possible orders.
It shows a few potential problems.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch eliminates the difference between the saturation and
desaturation rates. This was probably once meant as a conservative
measure but the desaturation rate was increased rather than the
saturation rate (which is probably a typo, as reported by Stefan).
Since there is no good basis for this anyway, this patch sets
both factors to 1.0 (and if accepted the whole factor business
should be removed).
This makes our deco times slightly longer. But in the past,
we had introduced a 1.2% fudge factor in the critical radius
calculation to add conservatism and match the benchmark better.
Removing this fudge factor brings us close to the benchmarks.
Expected test values updated.
Reported-by: Stefan <sjti@gmx.net>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the beginning of the diveplan, divedatapoints of zero
duration indicate available gases with the depth giving
the suggested switch depth. Zero-duration datapoints in
the middle of the dive do not have this meaning and should
thus be ignored when composing the gaslist.
The tests should have these gas defining segments in the beginning.
This fixes a problem when replanning a dive that would change
to random gases during deco.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
I don't understand why the SeaBear tests fail... of course commenting
out failing tests is exactly the wrong thing to do. But I'll open an
issue on github instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to avoid confusion with planner.display_deco_mode.
When accessing the "current deco mode" use the decoMode()
helper function.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We where testing the whole document, wich made qDebug
completely bogus to see where we failed at testing the
generated file. If we test line-by-line, we can know
more easily where we failed.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finishes the final round of Unittests for the Preferences
now it's time to look for things to fix.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Date loading was incorrect, this unittest + fix deals with that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is made just to make the tests appear in the same
order of the SettingsObjectWrapper order of initialization.
Since the SettingsObjectWrapper is huge, this helps
checking if everything is correct.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes a couple of issues with the tests.
Also, a type in prefs.h is "short" while it's actually
a boolean, this made me write the wrong testcase for this.
Fixed this by setting the Qt wrapper to bool, but I didn't
changed the c implementation because I tought I could break
something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Biggest test that I created. test all of TecDetails
information. Untested.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And it actually helped me to find a bug. yey.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A few more fixes for things that broke in commit 7be962bfc2 ("Move
subsurface-core to core and qt-mobile to mobile-widgets").
[Dirk Hohndel: slightly edited and overlap with Linus' patch removed]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I wasn't linking the tests against the qrc library, which made trying to
load the xslt transformation files for the parse test fail.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the load fails the get_dive(1) could return NULL. Let's catch that as
an error instead of having the test crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Besides making it more simple to add a new test now since
you don't need to play hide and seek with the main cmake
this has another good thing: on IDE's that scan the cmake
to create targets on the project tree, the main project
was being popullated with test-targets on the main tree
and not inside the tests directory.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We really should be able to parse the coordinates that we show in our own
HTML export as well as the standard Google format... both have a comma
between the latitude and longitude.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The purpose of testing against known Subsurface runtimes is to warn (when test
is run in verbose mode) if the runtime has altered. Before the next release, we
should update the known Subsurface runtimes to match current behaviour, so we
are alerted when we change something during the next release cycle.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 9d8b0ad introduces the copy_prefs function, and uses it to replace prefs
= default_prefs. We need to include subsurfacestartup.h for it to work in
testplan.cpp, otherwise TestPlan_build fails.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When just assigning one structure to the other we copy the string
pointers. If we then modify those strings in the copy, we happily free
the strings of the original. And then resetting the preferences equally
happily reused those strings, pointing to long since freed memory.
I think what I did now is excessive for the current use case in that it
copies a ton of strings that are unset in the default_prefs. But I figured
this is a rarely used function and I might as well do it correctly.
Also, once we implement multi user support with per user preferences we
will be copying completely populated preferences around (at least that's
my guess).
Fixes#940
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't happen, but in case there is a logic error higher up in the
code somewhere, this will prevent it from happening, period.
If the code asks for a new dive site with a specific uuid, simply return
the existing dive site with that uuid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The VPM-B benchmark results are all based on nominal/zero conservatism, so we
should make sure we use zero conservatism in the tests.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If variables were accidentally carried through from a previous calculated plan,
subsequent plan could be affected. This test aims to detect if this happens.
Commit 8994270 corrected such a bug. If it were reverted, this test would fail
(as it should).
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
From 31e324797c06d366f49db453a67a119819ca8012 Mon Sep 17 00:00:00 2001
From: "Robert C. Helling" <helling@atdotde.de>
Date: Wed, 2 Sep 2015 17:28:12 +0200
Subject: [PATCH] Test that there is a dive
so that the TestGitStorage does not hang when offline.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... as the former was introduced only in Qt 5.5 in order to make the
test build also with 5.4
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should compare the calculated runtime against the runtime previously
calculated by Subsurface, expecting them to match exactly, in order to detect if
a change has been made. We still compare against a benchmark, allowing some
difference.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is useful for determining why we calculate a difference profile
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add more VPM-B planner tests. The "expected" total run time is taken as the
total run time produced by the Fortran VPM-B program. For all these tests, the
results are within two minutes, which is a good result, but most are classified
as a "fail".
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a test for 100 m for 60 min dive on trimix using VPM-B
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- We add a dive while offline.
- On a different computer (here simulated by a different local cache) we
add a different file.
- Now we go back to the previous local cache (the one where we added a
different dive in the first step) and take that online (i.e., connect to
cloud storage). Now both of the new dives should have been added to our
data file.
This is a rather trivial test with no conflict and a straight forward
merge. We need to add a lot more test cases to make sure this works as
expected and doesn't leave the user with a corrupt state.
Ideally whatever happens, the user should never see an error...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All this really does is make sure that the fast forward works if the local
cache has received updates that haven't made it to the server, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that writing data to git storage and reading it back
gives you the same result. Without the fixed generation of initial dive
site UUIDs this fails.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code trusted in Windows new lines with length of 3. The new code
strips out spaces and line ending chars resulting in empty line being
of length 0.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This validates Seabear import from H3 and T1 dive computers that use new
CSV format to store the logs. The fields wary depending on the dive
mode, thus we need to parse the field configuration during import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With these values I reproduce the runtimes from the UI.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets up a standard dive scenario (30 minutes at 260ft/79m, EAN36 and
Oxygen as deco gases, last stop at 20ft/6m) and calls the planner to set
up a dive plan given certain standard gases.
Instead of trying to verify the complete plans it checks that we switch to
the deco gases at the right depth and the complete duration of the dive
matches our expectation.
The test intentionally fails right now for imperial as we have the wrong
switch depth for Oxygen. See how useful tests are?
On the downside, the test does NOT produce the same plan as Subsurface
when I try to create a consistent setup for both - and I have not been
able to figure out why. There must be some other parameters that I'm not
setting, but I haven't identified them, yet. It's very small differences,
for example in the metric case the stops at 21m, 9m, and 6m are each one
minute shorter in the test than it what Subsurface calculates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a poorly implemented hack when we executed the reverse geo lookup
in the main thread and opening a V2 file could take a very long time. We
need to do the "Welcome" message quite differently.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fixed it to correctly parse the mean depth (duh, a test that had a
bug) and added a buddy field for good measure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With no V2 question shown
- parsing fails when a V2 file is loaded
- parsing succeeds when a V3 file is loaded
- import of CSV file succeeds
With V2 question shown
- parsing succeeds when a V2 file is loaded
Finally compare the output of reading in the various files with reference
output included in the sources.
My guess is that this test might be a bit fragile, but hey, it's a start.
(reminder: the tests only get built when using cmake)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As requested in the user forum and in the mailing list, now support:
- 46.473881 6.784696 (format used in XML files)
- 48 51.491n 2 17.677e
I was not able to handle the XML format in a generic way without making
the code too ugly. So I've added an exception.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Refactored the parsing logic to make it more solid (no more guessing) and
more flexible (support more formats).
Added a test for checking that.
Fixed a few warnings.
[Dirk Hohndel: some changes to coding style]
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The C code should be compilable without the need to compile the Gui part,
too. This is expecially good for unit testing as we can test all the
algorithms without a window appearing out of nowhere.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just a stub test case to show how a test case should be
implemented. every 'private slot' on the test classes will be
automatically executed when you run 'make test' on the terminal,
and a report will be generated with a failure / success.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
