If the dive list is filtered the map should hide dive locations
that do not match the dive list filter.
To achieve that, loop over dives instead of dive sites in
MapWidgetHelper::reloadMapLocations() and discard
dives that are hidden by the filter. Then check if a dive
has a dive site attached to it and re-use the old functionality.
Suggested-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The filter code was an unholy intermixture of backend and frontend
logic, which made it hard to access it from outside of the UI.
Notably, it expected that Qt would call filterAcceptsRow on all rows.
For trip-view, apparently the filter functions were called twice
(once for filtering the trip, then for filtering the individual dives).
Make the filtering explicit, by calling showDive() for all dives in
MultiFilterSortModel::myInvalidate(), setting the hidden_by_filter
flags accordingly and ultimately invalidating the filter.
The UI code only accesses the hidden_by_filter flag set previously.
The "justCleared" flag can then be removed, since accessing the filter
does not have side effects. Moreover, there is no noticeable performance
gain by returning out early.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
Make methods static to allow fast and esay access
use qPrefXYZ::foo() instead of qPrefXYZ::instance()->foo()
Signed-off-by: Jan Iversen <jani@apache.org>
Prepare qPref.* to run load/sync
Make variables and methods static to give easy access
Make getter inline to give faster access
Signed-off-by: Jan Iversen <jani@apache.org>:wq
The compiler complained about assigning the "const char *" returned by
mb_cstring() to a "char *". The warning is correct, as the returned
buffer still belongs to the membuffer. The code only worked because
destruction of the membuffer was "forgotten".
Fix this by using the "detach_buffer()" function, which passes ownership
to the caller and accordingly returns a "char *".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make dive-filtering accessible from other parts of the code,
break out the actual dive-filtering code into a function that
takes a pointer-to-dive instead of QModelIndex.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Conceptually, the doFilter() functions shouldn't modify the dive
they test. Therefore, make the argument const. To do this, constify
the parameter of get_dive_location(), which likewise seems to be
the right thing to do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Change the signature from of the virtual doFilter() functions from
bool doFilter(struct dive *d, QModelIndex&, QAbstractItemModel*) const;
to
bool LocationFilterModel::doFilter(struct dive *d) const;
as the QModelIndex and QAbstractItemModel parameters were not used.
This makes this functions independent from Qt's model/view
framework. This is in preparation for making the undo-machinery
compatible with the filtering.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove General from SettingsObjectWrapper and reference qPrefGeneral
update files using SettingsObjectWrapper/General to use qPrefGeneral
this activated qPrefGeneral and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Remove PartialPressureGas test in testpreferences
add the same PartialPressureGas tests to testqPrefPartialPressureGas
Signed-off-by: Jan Iversen <jani@apache.org>
remove PartialPressureGas from SettingsObjectWrapper and reference qPrefPartialPressureGas
update files using SettingsObjectWrapper/PartialPressureGas to use qPrefPartialPressureGas
this activated qPrefPartialPressureGas and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove Geocoding from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Geocoding to use qPrefFacebook
this activated qPrefGeocoding and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove Language from SettingsObjectWrapper and reference qPrefLanguage
update files using SettingsObjectWrapper/Language to use qPrefLanguage
this activated qPrefLanguage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
In the HTML export, the list of trips emitted into lib.js is in
chronological order, the dives are shown reverse chronological order.
This leads to a weird experience of the earliest trip being on top and
the dives within it having the most recent dive on top.
Invert the processing order in the javascript layer so that the last
trip is rendered first.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
