This will read duration from CSV in minutes if the dive would be less
than 10 minutes when treating the duration as seconds.
In practice, this means that free-divers cannot import dive duration
properly from CSV, but this should be sensible for scuba divers.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing multi-line notes field on CSV import.
Naturally the notes filed must be quoted with " in this case.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch uses pre-defined working pressures on cylinders to roughly
calculate the size in liters. Imperial selection is ignored here as we
can use the prefix to detect if the value seems like imperial unit (and
the type of cylinder varies based on location, not divers preference in
unit).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If specific value is not available, we need to have an empty value
instead.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Try to grab pressure information from first DC if it is not manually
entered.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to limit the DCs from which we grab the depths. Otherwise, we
end up with too many depth values.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If temperature is recorded by a DC it must be taken from under the
divecomputer tag. However, this will prefer the manually written value
if such exists.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to export all the details that someone might copy from a
paper logbook. We need a matching import template to make this simple.
This hasn't been well tested, I'm sure it will break when elements and
attributes are missing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing cylinder information from manually kept
dive logs. However, this cannot be used before GUI counterpart is added.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing temperatures from manually kept dive logs.
However, this cannot be used before GUI counterpart is added.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existence of location information was tested incorrectly resulting
in erroneously adding these fields if they were not present.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having the mix name like EANX34 as cylinder description was apparently
confusing, so switching to 'unknown' instead.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing cylinder information from at least Xdeep
and Diving Log v 5.0.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF only supports a specific set of alarms. Some events also don't map
to alarms but map to other types of elements in UDDF.
This patch adds a map of the accepted types. Where a map doesn't exist
the type will not be mapped to an alarm, the option then remains to
map it to another kind of element, in the same way that happened with
headings and gas switches.
This removes the need for the specific exclusion of heading and
gas switch, as they are now simply not included in the map.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using node() along with the node-set seems to grab the weights properly
for me.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that our UDDF export is adding time after the event name. Thus we
need to add reading the following time as well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adjust to UDDF 3.2 specification and use proper tag name for air
temperature.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The switchmix values must be concatenated properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to export only used cylinders to divelogs.de. The
detection is based only on o2 percentage as per our test dives. However,
the new cylinder id would be better, but that does not exist on old
dives.
Fixes#757
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug when the first sample doesn't contain pressure info.
This fixes that by selecting the first with pressure info.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XDS schema for UDDF is very sensitive to ordering of elements
so I've rearranged many of them to match. Elements in:
- informationbeforedive
- waypoint
Adjusted namespace of export to correct UDDF namespace.
Updated remaining references to mixes it include prefix 'mix'
Moved equipment from informationbeforedive to informationafterdive *
Change trip ids to generated IDs and updated tripmembership to use
the trip id instead of the name *
* These constitutes a difference in XSD and the documentation. I will
raise these issues with the author.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed underscore from buddy name elements
Added 'mix' prefix to gas ids. Ids must not start with a number.
Added mandatory profile data with empty tags.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XPath was incorrect for parsing divecomputers into the equipment
section, meaning they dont get inserted.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with buddies, sites could contain characters which are not valid
in Ids. Also, it is very possible to have duplicate site names.
This uses an XSL generated id to prevent any issues.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is instead of using their names, which may contain illegal
characters.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add name at <generator> level, and add additional <homepage> in
contact tag.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently repetition groups are used to group dives into trips. This
is not really correct. Repetition groups should really represent a
group of dives where tissue loading needs to be preserved between
dives (typically the same day).
UDDF has support for trips, using the <divetrip> tags. This is a
bidirectional link between the dives and the trips.
This patch adds support for these trips. However, it leaves in the
repetition groups. Repetition groups may need further consideration.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sum together all of the weights recored on a dive to use in the
<leadquantity> tag in UDDF export.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
