This seems like a useful default action when people are looking at the dive
list (and it's a request from a user to have this as a button instead of just
via the menu).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This requires a change to Kirigami so that a property change (instead of
calling the open() function) can trigger the animation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This bug admittedly hits almost nobody, but if you had multiple cylinder
pressure sensors on the same cylinder (attached to multiple dive
computers, of course), we would take the beginning pressure from the
first dive computer, and the ending pressure from the last dive
computer.
That came about because we'd just walk all the dive computer samples in
order, and the first time we see a relevant sample and we don't have a
beginning pressure, we'd take that pressure. So the beginning pressure
was from the first dive computer, and once we'd seen a valid beginning
pressure, that would never change.
But as we're walking along, we'd continue to update the ending pressure
from the last relevant sample we see, which means that as we go on to
look at the other dive computers, we'd continue to update the ending
pressure with data from them.
And mixing beginning/ending pressures from two different sensors just
does not make sense.
This changes the logic to be the same for beginning and ending
pressures: we only update it once, with the first relevant sample we
see. But we walk the samples twice: forwards from the beginning to
find the first beginning pressure, and backwards from the end to find
the ending pressure.
That means that as we move on to the second dive computer, we've now
filled in the ending pressure from the first one, and will no longer
update it any more.
NOTE! We don't stop scanning the samples (or the dive computers) just
because we've found a valid pressure value. We'll always walk all the
samples because there might be multiple different cylinders that get
pressure data from different samples (and different dive computers).
We could have some early-out logic when we've filled in all relevant
cylinders, but since this just runs once per dive it's not worth it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
fixup_dive_dc() is called for each dive computer when we add a new dive.
It does various housekeeping functions, cleaning up the sample data, and
fixing up dive details as a result of the sample data.
The function has grown to be a monster over time, and particularly the
central "walk every sample" loop has become an unreadable mess.
And the thing is, this isn't even all that performance-critical: it's
only done once per dive and dc, and there is no reason to have a single
illegible and complex loop.
So split up that loop into several smaller pieces that each will loop
individually over the sample data, and do just one thing. So now we
have separate functions for
- fixing up the depth samples with interpolation
- fixing up dive temperature data
- correcting the cylinder pressure sensor index
- cleaning up the actual sample pressures
Yes, this way we walk the samples multiple times, but the end result is
that the code is much easier to understand. There should be no actual
behavioral differences from this cleanup, except for the fact that since
the code is much more understandable, this cleanup also fixed a bug:
In the temperature fixup, we would fix up the overall dive temperatures
based on the dive computer temperatures. But we would then fix up the
overall dive computer temperature based on the sample temperature
*afterwards*, which wouldn't then be reflected in the overall dive
temperatures.
There was another non-symptomatic bug that became obvious when doing
this cleanup: the code used to calculate a 'depthtime' over the dive
that was never actually used. That's a historical artifact of old code
that had become dead when the average depth calculations were moved to a
function of their own earlier.
This is preparatory for fixing the overall cylinder pressure stats,
which are currently wrong for dives with multiple dive computers: we
currently take the starting cylinder pressure from the *first* dive
computer that has cylinder pressure information, but we take the ending
cylinder pressure from the *last* dive computer with cylinder pressure
information.
This does not fix that bug, but without this cleanup fixing that would
be a nightmare due to the previous complicated "do everything in one
single loop" model.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just allows the script to be used when you are working locally on
Kirigami to test changes - no point in waiting for a pull from upstream
then. The only goal is to copy the files over.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the lines that together form one dive move closer together so the dives
visually stand out more.
(this also includes small white space change, oops)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This merge was a bit more challenging given how far things had diverged,
but I hope I got it mostly right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we have one function that correctly ends both modes.
As a positive side effect this fixes a bug where one could exit the
add mode by tapping Dive list in the main menu which would not delete
the partially created dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We really have two different cases for merging dives:
(a) downloading a new dive from a dive computer, and merging it with an
existing dive that we had already created using a different dive
computer. This is the "try_to_merge()" case, called from
"process_dives()
(b) merging two different dives into one longer dive. This is the
"merge_two_dives()" case when you explicitly merge dives using the
divelist.
While a lot of the issues are the same, many details differ, and one of
the details is how dive numbering should be handled.
In particular, when you download from a dive computer and merge with an
existing dive, you want too take the *maximum* dive number, because the
dive computer notion of which dive it is may well not match what the
user dive number is.
On the other hand, when you explicitly merge in the dive list, you end
up renumbering not just the dive you are merging, but also all
subsequent dives, since you now have one fewer dives overall. So that
case already has to be handled by the caller.
Now, the simpler "download from dive computer" case was broken by commit
ce3a78efca ("Assign lower number to a merged dive instead of higher
one"). It fixed the numbering for the divelist case, but broke the
download case.
So this commit reverts commit ce3a78efca, and instead extends and
clarifies the dive renumbering that "merge_two_dives()" already did. It
now explicitly renumbers not just the following dives, but also
renumbers the merged dive itself, so now we can go back to the old "take
the bigger dive number" for the core merging, which fixes the download
case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic looked so easy, but the preference needs to be hard coded twice
because there are two scenarios:
- new install, make sure we load the password from settings (so it needs
to be hard coded BEFORE we load preferences)
- update where previously for some reason the user stored that they
didn't want to store the password, so we need to also hard code it after
the settings were loaded
Looks odd, but that should do the trick.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was exactly backwards. If there already are changes we do NOT want to
reload - that would overwrite those changes for no good reason; after all, the
starting point was correct, so why throw the changes away?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create small visible separation from the dive trip before. And make the dive
trip header a slightly different color so they stand out between dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes it MUCH easier to deal with a lot of dives.
Instead of needing a more complicated model we simply use the meta data that
allows us to create the dive trip sections to hide (make invisible + height 0)
all dives that aren't in the selected trip.
I'll admit that this was much easier than I expected it to be.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way warning icons and tank change icons and other event markers are no
longer ridiculously tiny on retina screens. Oddly this doesn't appear to be
needed on Android, only on iOS.
Fixes#1033
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commit d99c931219 ("QML UI: remove the checkbox for remembering the
password") made the incorrect assumption that this would always be true
by default when it actually was false by default. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way even on smaller screens both email and password should fit
above the keyboard which makes data entry so much easier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user goes to the credentials screen, they likely want to edit
something. So put the focus on the first entry field and show the
keyboard.
We also need to hide the keyboard when the credential screen becomes
invisble so that the keyboard doesn't stay around when the dive list
is shown.
Suggested-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some users try to run Subsurface as root for example to get around
permission problems with dive computer devices. This is a bad idea
since config files get touched as root and then cannot be read
as normal user anymore.
This patch allows running as root only with verbose option on. We can
assume if somebody manages to start subsurface as root this happens
from the command line.
For some reason, I couldn't get translation working at this stage.
Windows version is a stub.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the context of the mobile app this simply makes no sense. If the user
doesn't select this option, the app doesn't really work. So why have the option
in the first place?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Can't believe I didn't notice them earlier... I must have stared at these
strings countless times.
Reported-by: Scott Ireland <scott@sdj.ca>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 78a8137963.
These keys don't enable access, they require the device to have GPS support.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I wasn't linking the tests against the qrc library, which made trying to
load the xslt transformation files for the parse test fail.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
