This fixes a rather subtle bug.
In btdiscovery.cpp we are detecting dive computers based on their BT name and
are setting up product+vendor as the key for that lookup. QMap always uses case
sensitive comparisons and a tiny inconsistency snuck into our code.
libdivecomputer names for the Aqualung dive computers i200C / i300C / i550C end
in an upper case C (as matches the official branding), but in btdiscovery.cpp
we have those names with lower case c. And therefore didn't recognize these
dive computers.
Obviously this is easy to fix by fixing those three strings, but I decided that
it was silly to set ourselves up for similar oversights in the future. So
instead I switched the matching of the descriptor to simply be allways all
lower case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the undo-command for importing dives also on mobile. This should make the
whole disconnect-model shenigans unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The plan is to make the model the authoritative source of
the imported dives. Therefore, access the number of
downloaded dives from there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearing the table in the thread leaves the model in an inconsistent
state. Don't do that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing dives, consume the tables from DiveImportedModel
and not the DownloadThread. This appears more logical and avoids
an inconsistent state of the DiveImportedModel: On import the
tables would be reset, but the DiveImportedModel wasn't
informed of that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DownloadFromDCWidget::on_ok_clicked() deselected dives were
directly deleted from the dive table, leaving DiveImportedModel
in an inconsistent state. Use the function in DiveImportedModel
instead. This also removes code duplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, desktop and mobile are accessing the DownloadThread
and the DiveImportedModel concurrently. This makes a big data
flow mess. To achieve a more hierarchical data flow, start
by making the DownloadThread a subobject of DiveImportedModel.
Start the download by calling a function in DiveImportedModel.
Route the finished signal through DiveImportedModel. Thus,
the model can reload itself with the new data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replaces some enums with names that do not clash with windows #defines.
Specifically:
ERROR -> ERRORED, PASCAL->PASCALS, IGNORE->IGNORED,FLOAT->FLOATVAL
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
When switching to a BT dive computer, the device selection dialog is opened,
when switching away from BT, the device address is set.
Fixes#2139
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
ostcFirmwareCheck in DownloadFromDCWidget was neither freed
in the destructor, not freed if a new object was allocated.
Simply make it a unique_ptr<> to do all the work for us.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 891fcbf520 boolean parameters were
replaced by flags. Fix an error in this commit: IMPORT_IS_DOWNLOADED
should be IMPORT_PREFER_IMPORTED.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After the downloading finished, the mainwindow-display is reset
via a signal. This is probably an artifact of old times, when
downloading was done into the main dive-list. Nowadays, this seems
to make little sense, as the main dive-list is not changed by download.
Remove the signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On desktop, replace all add_imported_dives() calls by a new undo-command.
This was rather straight forward, as all the preparation work was done
in previous commits.
By using an undo-command, a full UI-reset can be avoided, making the UI
react smoother.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we want to download trips into a distinct trip-table
instead of the global trip-table to allow for undo of import.
Therefore add a trip_table argument to DiveImportedModel::repopulate()
and a trip_table member to DiveImportedModel. To correctly set these,
add a DownloadThread::trips() function, which currently simply returns
the global trip table.
Finally, make "struct trip_table *" a Q_METATYPE, so that the corresponding
arguments can be passed from QML.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After loading or importing, the caller usually called autogroup()
to autogroup dives if so wished by the user. This has already led
to bugs, when autogroup() was forgotten.
Instead, call autogroup() directly in the process_loaded_dives()
and process_imported_dives() functions. Not only does this prevent
forgetting the call - it also means that autogrouping can be
changed without changing every caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To make data flow more clear, unglobalize the downloadTable object.
Make it a subobject of DownloadThread. The difficult part was making
this compatible with QML, because somehow the pointer to the
download-table has to be passed to the DiveImportedModel. Desktop would
simply pass it to the constructor. But with objects generated in QML
this is not possible. Instead, pass the table in the repopulate()
function. This seems to make sense, but for this to work, we have to
declare pointer-to-dive-table as a Q_METATYPE. And this only works
if we use a typedef, because MOC removes the "struct" from "struct
dive_table". This leads to compilation errors, because dive_table is
the symbol-name of the global dive table! Sigh.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function resets the DiveImportedModel. It takes two
arguments: first and last index. All callers passed in 0
and number-of dives anyway, so remove the arguments.
Since this now does the same as repopulate(), merge the
two functions.
Moreover, implement Qt-model semantics by using a
beginResetModel()/endResetModel() pair. This simplifies the
code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On dive-download old dives are deselected and a new one is selected.
If no dives were downloaded, accordingly no dives were selected.
This deselect only dives if at least one dive was downloaded.
Fixes#1793
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to track whether we had selected the native BT mode in the
download dialog. But the information is redundant as we can tell from the
device name whether this is a BT/BLE download or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of the weirdly named "information" and the inconsistent
"dive_list" use the logical "mainTab" and the camel-cased
"diveList", respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keeps track of different sub widgets needed by other parts
of the code, notably:
MainTab
PlannerDetails
PlannerSettingsWidget
ProfileWidget2
DivePlannerWidget
DiveListView
Access to these widgets was provided with accessor functions.
Now these functions were very weird: instead of simply returning
pointers that were stored in the class, they accessed a data
structure which describes the different application states.
But this data structure was "duck-typed", so there was an
implicit agreement at which position the pointers to the
widgets were put inside. The widgets were then down-cast by
the accessor functions. This might make sense if the individual
widgets could for some reason be replaced by other widgets
[dynamic plugins?], but even then it would be strange, as one
would expect to get a pointer to some base class.
Therefore, directly store the properly typed pointers to the
widgets and simply remove the accessor functions. Why bother?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we update the device with a shortcut button, this is the reliable way to get
the information we need.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously nothing was shown while we were trying to connect; now we show a busy
indication in the progress bar and ensure that the 'waiting to connect' text is
displayed. The progress bar switches back to showing actual progress once we have
connected and are downloading data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This refactors the undo-commands (which are now only "commands").
- Move everything in namespace Command. This allows shortening of
names without polluting the global namespace. Moreover, the prefix
Command:: will immediately signal that the undo-machinery is
invoked. This is more terse than UndoCommands::instance()->...
- Remove the Undo in front of the class-names. Creating an "UndoX"
object to do "X" is paradoxical.
- Create a base class for all commands that defines the Qt-translation
functions. Thus all translations end up in the "Command" context.
- Add a workToBeDone() function, which signals whether this should be
added to the UndoStack. Thus the caller doesn't have to check itself
whether this any work will be done. Note: Qt5.9 introduces "setObsolete"
which does the same.
- Split into public and internal header files. In the public header
file only export the function calls, thus hiding all implementation
details from the caller.
- Split in different translation units: One for the stubs, one for
the base classes and one for groups of commands. Currently, there
is only one class of commands: divelist-commands.
- Move the undoStack from the MainWindow class into commands_base.cpp.
If we want to implement MDI, this can easily be moved into an
appropriate Document class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Keeping undo-history across load makes little sense. The user was
expressly reminded that they have unsaved work.
For import (from other logs or the dive-computer) an undo-functionality
would be desirable. Nevertheless, this is rather complex since
new and old dives are merged. Implementation would require a finer
backend<->undocommand interface. Thus, leave this for now until more
experience with the undo system is acquired.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives were directly imported into the global dive table and then
merged in process_imported_dives(). Make this interface more flexible,
by passing an independent dive table.
The dive table of the to-be-imported dives will be sorted and merged.
Then each dive is inserted in a one-by-one manner to into the global
dive table.
This actually introduces (at least) two functional changes:
1) If a new dive spans two old dives, it will only be merged to the
first dive. But this seems like a pathological case, which is of
dubious value anyway.
2) Dives unrelated to the import will not be merged. The old code
would happily merge dives that were not even close to the
newly imported dives. A surprising behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This still doesn't do the right thing for BT/BLE connections on a Mac, but it
should work on Linux and possibly Mac.
We definitely need to figure out how to get the Mac to successfully connect back
to a BT/BLE device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The straight forward code to update the currentIndex of the combobox doesn't
appear to work on macOS (but works fine on Linux). Calling the event loop and
then calling update afterwards seems very unintuitive, but it appears to fix
the issue in my testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The algorithm tries to keep the order of the buttons the same. So if a dive
computer was used that's already remembered, don't reorder the buttons. But if
a new dive computer is used, add it as the first one and move the others back,
potentially dropping the oldest one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply create the buttons that can be used as shortcuts to previously used dive
computers. This isn't hooked up at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we don't auto-detect where the Garmin Descent is mounted, the user
can either just type in the correct path, or can use a file diealog to
specify it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes some special-case code for Uemis, replacing it with simply
passing in the device transport information.
This makes device enumeration work for the Garmin Descent (if it is
listed by libdivecomputer as a USB storage device, that is).
I don't actually do any of the libdivecomputer parsing yet, and only
have a stub for the Garmin Descent, but now the directory selection
works with that stub. The actual download obviously does not.
[Dirk Hohndel: removed obsolete FIXME from code]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also show a new firmware notice for a HW OSTC Plus. This appeared
to be broken (as can be verified on the current master from today,
as HW just released version 2.98 of the firmware).
Notice that there is some confusion in both Subsurface and
Libdivecomputer with respect to types of OSTCs. Physcically,
there exist 2 type of OSTC3's. The first edition with
only DC_TRANSPORT_SERIAL (and an USB connector), and a second
version that lacks the connector but supports both BT and BLE.
Confusingly, the second version is marked OSTC3 on the device,
but the user needs to select OSTC Plus (which is basically a 3rd
version of the OSTC3, combined with a successor of the OSTC Sport)
to download dives using BT/BLE.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
