Commit 709c1df2af introduced a hard blocking read for BLE devices.
This did break BLE reads from multiple DCs, and (in hindsight) was not
a correct implementation. It would require, for example, dynamic
read buffers as especially profile data grows with dive time, and
in addition, and more importantly, also the OSTC libdc parser cannot
process the entire profile of a dive at once (but likes to receive
it in 1K blocks). So, basically, it introduced issues, and did not
solve the OSTC read.
This commit reverts this hard blocking read (and as such will break
OSTC BLE reads). But it enables removal of the special cases for
the EON Steel and G2.
A next commit will solve OSTC BLE reads.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Handle credits. Do not just ask for maximum credits all the time as this
will stop the download. Also do not let the credits go back to 0 (while
this might work, this is not tested). Getting back the 0 credits stops
the download, and even when it can be restarted, it is less efficient
(and not needed). Notice also that it takes some time before a grant
request is honoured. During testing I saw reception of up to 25 packets
between request and grant. So a lower bound for the request of
32 packets seems resonable.
One aspect the Telit/Stollmann TIO puzzeled me. Sections 4.1 and 4.2
both talk about credits, but my hyphothesis is that there are two
credits counters in play. One for traffic either way. This commit
only deals with credits granted by Subsurface to the OSTC to send
data. Credits granted by the OSTC to allow Subsurface to send new
commands is NOT part of this commit, and is seemingly not needed
in our scenario. As we only send new commands to the OSTC when
a previous one is finished (per HW's interface spec), the OSTC
does not run out of credits to receive commands.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit only has the actual changes, the next commit will clean up
the white space in order to make it more obvious what was done.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The trick is to pick a path that is accessible from other applications.
In theory QStandardPaths::GenericDataLocation should provide that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While it's nice to have the numerical model in the logfile,
on the screen the user wants to see the dive computer product
name. And none of those hex numbers that make the text so long
that it becomes useless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These buttons only work when we successfully downloaded a dive. Also, don't
show a list of dives when there are no dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To be shared between C/C++ and QML code in order to show the updates
and potential error messages from libdivecomputer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit ed43b5dced ("Add
support for tank sensor battery for Perdix AI") since a much better
solution to get to that information has been implemented in
libdivecomputer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use a little script to create the code snippet. This script in return
relies on comments that were added to the latest libdivecomputer source
(in the Subsurface-branch).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: collapsed all of the commits into one]
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit awkward with a VENDOR event - but at the time the strings
are generated, we don't have the information, yet, that we need to
determine these values (we need the last sample parsed, but the strings
are created as part of the dive headers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
subsurface/core/divesitehelpers.cpp: In member function 'virtual void ReverseGeoLookupThread::run()':
subsurface/core/divesitehelpers.cpp:128:12: error: invalid use of incomplete type 'class QDebug'
qDebug() << "no reverse geo lookup; geonames returned\n" << fullReply;
^
Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
In general this patch enables building of subsurface without being
forced to use the official Qt binary packages. This is particularly helpful
when having to debug Qt internals or having to deal with custom patches
on top of the official Qt releases.
The architecture dependent file path layout is only employed by official
Qt binary packages. They are the result of a reordering at package
generation time. If Qt was build for a single architecture, the standard
layout does not add the architecture specific top level patch for the resulting
binaries.
Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
The current BLE read reads just one 20 bype packet. That packet size is set
in ble_serial_ops, so, without being able to test on anything other than
a OSTC3, I assume that this holds for other BLE DCs too. So, I think is
is weird that those interfaces work with the current read() of just one
packet at the time.
As we need a blocking read (at least for the OSTC parser), just read all
data that is available on the input. And when we think we are done, give
the QtEventloop control to see if there is more, and process that incoming
data as well. All this basically implements a blocking read.
CAVEAT 1: This might break the reading from the currently working BLE devices.
CAVEAT 2: With this, I still cannot read the OSTC3 completely. For
developers familiar with the HW transfer protocol: it just stops while
reading the first full dive (header + profile) command 0x66, despite
correctly reading about 5Kb of data before. For some
reason, I do not believe that this is related to this commit.
CAVEAT 3: All above tested on Linux Desktop with bluez stack, and
confirmed NOT to work on Android 7.1.2, build with Qt 5.9.0, And
yes, I know 5.9.1 recommended.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
1) As the OSTC sends data to the BLE central role (the SSRF client) over 2
characteristics, we have to filter the administrative credit data from
the actual dive data that it received. The characteristcStateChanged
function is adapted for this.
2) We have to be sure that the Terminal Client I/O is fully defined during
opening the connecton to the OSTC. From 6d505b24f0c15 we can see
that the last step in setting up the terminal interface is the grant
of credits. This is done by writing to the proper (the only one, with
id = 0x2902) descriptor of the credits RX characteristic. The here
added slot is triggered on the completion of write of credits marking
the final stage of the setup.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The current "select the correct BLE service to talk to" is flawed.
It assumes that the first found non-standard UUID is the right one
and apparently it is for some DCs. But not for the HW devices.
The HW devices use a "standard" ie. approved by the Bluetooth
SIG, controller, that comes with a UUID that our code currently
considers standard so not to be the right one.
This (simple) commit selects the right service for HW. The UUID
is hard coded, and this is ok, because it is tied to the hardware
used by HW. Futher, it does not change anything for other BLE
devices.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This initalizes the Terminal I/O client as described in paragraph 3 of
http://www.telit.com/fileadmin/user_upload/products/Downloads/sr-rf/BlueMod/TIO_Implementation_Guide_r04.pdf
This is for all Heinrichs Weikamp computers, that use referenced BT/BLE hardware
module from Telit Wireless Solutions (Formerly Stollmann E+V GmbH). The 16 bit
UUID 0xFEFB (or a derived 128 bit UUID starting with 0x0000FEFB is a
clear indication that the OSTC is equipped with this BT/BLE hardware.
Furthermore, most devices equipped with this BT/BLE hardware have BT addresses
starting with 00:80:25:...
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This seems really long, but one user appeared to get a response after
almost 10 seconds. So going with 12 for some margin of error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
