remove PartialPressureGas from SettingsObjectWrapper and reference qPrefPartialPressureGas
update files using SettingsObjectWrapper/PartialPressureGas to use qPrefPartialPressureGas
this activated qPrefPartialPressureGas and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Geocoding from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Geocoding to use qPrefFacebook
this activated qPrefGeocoding and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Language from SettingsObjectWrapper and reference qPrefLanguage
update files using SettingsObjectWrapper/Language to use qPrefLanguage
this activated qPrefLanguage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove TechnicalDetails from SettingsObjectWrapper and reference qPrefTechnicalDetails
update files using SettingsObjectWrapper/TechnicalDetails to use qPrefTechnicalDetails
this activated qPrefTechnicalDetails and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove UpdateManager from SettingsObjectWrapper and reference qPrefUpdateManager
update files using SettingsObjectWrapper/UpdateManager to use qPrefUpdateManager
this activated qPrefUpdateManager and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove DivePlanner from SettingsObjectWrapper and reference qPrefDivePlanner
update files using SettingsObjectWrapper/DivePlanner to use qPrefDivePlanner
this activated qPrefDivePlanner and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Units from SettingsObjectWrapper and reference qPrefUnits
update files using SettingsObjectWrapper/Units to use qPrefUnits
this activated qPrefUnits and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Commit df156a56c0 replaced "virtual"
by "override" where appropriate. Unfortunately, this had the
unintended consequence of producing numerous clang warnings. If
clang finds a override-modified function in a class definition,
it warns for *all* overriden virtual functions without the override
modifier.
To solve this, go the easy route and remove all overrides. At least
it is consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keyword "virtual" signalizes that the function is virtual,
i.e. the function of the derived class is called, even if the
call is on the parent class.
It is not necessary to repeat the "virtual" keyword in derived
classes. To highlight derived virtual functions, the keyword
"override" should be used instead. It results in a hard compile-
error, if no function is overridden, thus avoiding subtle bugs.
Replace "virtual" by "override" where appropriate. Moreover,
replace Q_DECL_OVERRIDE by override, since we require reasonably
recent compilers anyway. Likewise, replace /* reimp */ by
"override" for consistency and compiler support.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
WindowsTitleUpdate is such a trivial object (a QObject with a single
signal and no own state), that it's not really understandable why
it would need all that "singleton" boiler-plate. Just make it
a default constructed/destructed global object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function DiveListView::fixMessyQtModelBehaviour() was used to
expand the first columns of dive-trips in the dive-list view.
This function was called everytime that the dive-list was modified.
It is kind of ludicrous that external callers would have to
tell the DiveListView, when it has to update its column headers.
Instead, place this functionality in the overriden reset() and
rowsInserted() functions, as these are the only ways that
rows can be added. Change the DiveTripModel to use the proper
beginResetModel()/endResetModel() pair instead of the previous
full deletion and full repopulation using the beginRemoveRows()/
endRemoveRows() and beginInsertRows()/endInsertRows().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The currentDiveChanged signal was emitted by the DiveListView
to inform the MainWindow of a change of current dive. The
new current dive was passed as a parameter. The slot in MainWindow
then called select_dive() on the dive.
This seems pointless because:
1) In both emits, selected_dive dive was passed as argument. But
MainWindow can read this global variable itself.
2) Calling select_dive() again is a no-op, because obviously,
this already *was* the selected dive.
Moreover it seems conceptually wrong to set the current dive in the
slot that is informed of the change of the current dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove Proxy from SettingsObjectWrapper and reference qPrefProxy
update files using SettingsObjectWrapper/Proxy to use qPrefProxy
this activated qPrefProxy and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
This debugging-slot was not linked anywhere. And especially in the
light of the impending refactoring of DiveListView/DiveTreeModel
it seems pointless to keep old debugging code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Extract thumbnails using ffmpeg.
Behavior is controlled by three new preferences fields:
- extract_video_thumbnails (bool): if true, thumbnails are calculated.
- extract_video_thumbnail_position (int 0..100): position in video
where thumbnail is fetched.
- ffmpeg_executable (string): path of ffmpeg executable.
If ffmpeg refuses to start, extract_video_thumbnails is set to false
to avoid unnecessary churn.
Video thumbnails are marked by an overlay.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove Facebook from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Facebook to use qPrefFacebook
this activated qPrefFacebook and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
The column-widths must only be set once the source-model is that.
The old code realized this with a rather complicated logic.
Instead, simply set the source-model in the constructor and
set the column widths after that. Rename the corresponding
function from "setupUi" to "setColumnWidths".
Moreover, the setupUi function had different code-paths for
the first and other calls. Since it is only called once,
remove the other code paths.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Conceptually, the width of the columns should probably reside in
the view not the model. But much more severly, the old code didn't
work: Columns were set in a DiveTripModel, which was deleted
right away.
Therefore, move the logic back to the DiveListView. Introduce
a QVector<int> of the initial column widths, so that they can be
erased from the setting if unchanged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove DiveComputer from SettingsObjectWrapper and reference qPrefDiveComputer
update files using SettingsObjectWrapper/DiveComputer to use qPrefDiveComputer
this activated qPrefDiveComputer and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove CloudStorage from SettingsObjectWrapper and reference qPrefCloudStorage
update files using SettingsObjectWrapper/CloudStorage to use qPrefCloudStorage
this activated qPrefCloudStorage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Add a context-menu entry to TabDivePhotos which opens the folder(s)
of all selected files.
Fixes#1514.
Suggested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the last dive of a trip is removed, the trip is deleted.
On redo the dive is added to a non existing trip, leading to a
segfault.
Therefore, keep a copy of the trip to reinstate it on redo.
Note: this cannot work for a sequence of multiple commands.
One would have to rewrite the whole undo-history. Nevertheless,
let's do this as a stop-gap measure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
UndoDeleteDive::tripList kept track of the trips to be recreated on
undo. But the list wasn't cleared on undo, thus on subsequent redo
the same trip was readded to the list, leading to double-free.
This could trivially be reproduced by repeated CTRL-Z, CTRL-SHIFT-Z
pairs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
9efb56e2d4 introduced rather complex
logic for picture drag'n'drop events onto the profile. Among other
things, the code had to check whether the picture actually belongs
to the displayed dive.
This can be simplified by transporting the dive-id in the drag'n'drop
event structure. The flow goes like this:
DivePictureModel--(1)-->DivePictureWidget--(2)-->ProfileWidget
For (1), we can use the Qt::UserRole role. This was used to transport
the picture-offset, but this is not needed anymore since ProfileWidget
was decoupled from DivePictureModel.
For (2), we simply replace the "position" value, which was never used.
Why would the receiver care which pixel was pressed in the media-tab?
This commit also contains a minor cleanup in DivePictureWidget:
QListView::mousePressEvent(event) was called in both branches of an
if and can therefore be removed from the if. This is so trivial,
that it doesn't warrant its own commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the remoteDeviceScanFinished slot, the old code called into
the deviceDiscoveryError() in case the device discovery agent
had the error flag set. This is not necessary, since the agent
will send an error signal in such a case.
For Qt's device discovery agent, the whole check-for-error is
unnecessary, as the documentation states:
"The signal is not going to be emitted if the device discovery
finishes with an error."
But for the homebrew WinBluetoothDeviceDiscoveryAgent, which
derives from QThread, both an error() *and* a finished()
signal will be sent. Therefore keep the test, but don't call
into the slot twice.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive_getUniqID() is used to create unique dive ids, which are
stable during application lifetime. It was passed a dive, checked
that the id was not set (if it was that it is know to the application)
and set a new id (in contradiction to its name!) if it hadn't any.
There were three callers:
alloc_dive(): called the function on a zeroed dive struct.
fixup_dive(): called the function only if the dive had a 0 id.
MainWindow::setupForAddAndPlan(): called the function on a zeroed dive
struct.
Thus, in all three callers the id is guaranteed to be zero and
the whole keeping-track-of-ids logic is moot. Remove the logic,
don't pass a dive struct to dive_getUniqID() and move the function
to the C-backend.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On top of the file filter for all media files add a file filter
for images only, one for videos only and one for all files.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This changes the above mentioned terms everywhere in the UI to
reflect the fact that Subsurface now also supports video files on top
of image files.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
When we introduced the whole check for supported transports code, no one
noticed that it broke configuring all ostc's over bluetooth.
The configure code just used a placeholder model of OSTC 3 to get the
right backend code. With the new supported transports model it errored
out if you where trying to connect to a bluetooth enabled device, just
because the original OSTC 3's wasn't bluetooth enabled.
This switches the placeholder model over to a OSTC Plus which is both
bluetooth, serial and ble capable, so the code works again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
remove Animations from SettingsObjectWrapper and reference qPrefAnimations
update files using SettingsObjectWrapper/Animations to user qPrefAnimations
this activated qPrefAnimations
Signed-off-by: Jan Iversen <jani@apache.org>
add the prepared class qPrefDisplay to SettingsObjectWrapper and thereby making it active.
As a consequence of the uniform naming standard desktop-widgets/preferences_defaults.cpp and
tests/testpreferences.cpp have been updated.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove qmlRegister in desktop-widgets/mapwidget in order to have a shared
registration in subsurface-helper.cpp
Signed-off-by: Jan Iversen <jani@apache.org>
add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
There were two catch-all classes for translations outside of class
context. gettextFromC was used exclusively from C, but C++ used
both, gettextFromC and QObject. Some of the string were even present
in both. Therefore, unify to gettextFromC throughout the code base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove cloud_storage_status from qmlprefs.h.
usage to qPref::
enum cloud_storage_status is not used from C, but only from C++, and
having the same structure defined multiple times is a maintenance
challenge.
Signed-off-by: Jan Iversen <jani@apache.org>
Move the find-moved-images functions into a new translation unit
and present the user with the identified matches before applying
them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the last commits, the canonical-to-local filename map was made
independent from the image hashes and the location of moved images
was based on filename not hashes. The hashes are now in principle
unused (except for conversion of old-style local filename lookups).
Therefore, remove the hashes in this commit. This makes addition
of images distinctly faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Users might have edited their pictures. Therefore, instead of identifying
pictures by the hash of the file-content, use the file path. The match
between original and new filename is graded by a score. Currently, this
is the number of path components that match, starting from the filename.
Camparison is case-insensitive.
After having identified the matching images, write the caches so that they
are saved even if the user doesn't cleanly quit the application.
Since the new code uses significantly less resources, it can be run in a
single background thread. Thus, the multi-threading can be simplified.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The connection canonical filename to local filename was done via
two maps:
1) canonical filename -> hash
2) hash -> local filename
But the local filename was always queried from the canonical filename.
Therefore, directly index the former with the latter.
On startup, convert the old map to the new one.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
move #include prefs-macros from SettingsObjectWrapper.h to SettingsObjectWrapper.cpp
include dive.h directly (only part of prefs-macros.h used) in preference classes
Signed-off-by: Jan Iversen <jani@apache.org>
When the tooltip is hidden QInputMethodEvent is handled
by QLineEdit and works properly.
When the tooltip is visible DiveLocationListView gains
focus and receives QInputMethodEvent, without handling
them properly.
This patch just forwards the event back to the QLineEdit
object.
Fix#1405
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
The old trGettext() was not thread-safe and the returned C-strings
could be freed in the case of empty translations strings. Therefore:
1) Introduce a mutex protecting access to the cache.
2) Never change existing entries, even if the translation string is empty.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were a handfull instances of the kind
1) gettextFromC::instance()->tr(...)
2) gettextFromC::instance()->trGettext(...)
1) is pointless, as tr is a static function.
All instances of 2) were likewise pointless, because trGettext()
returns a C-string, which was then immediately converted to a
QString.
Thus, replace both constructs by gettextFromC::tr(...).
After this change there was only one user of gettextFromC::instance()
left, viz. the C-interface funtion trGettext(). Therefore, remove
gettextFromC::instance() and do all the caching / translating
directly in the global trGettext().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove mapWidget entries from subsurface.qrc, and
add reference to map-widget.qrc in CMakelist.txt
Android uses the same CMakelist.txt
Signed-off-by: Jan Iversen <jani@apache.org>
In a number of places the global 'tank_info' array
is being iterated based on a 'tank_info[idx].name != NULL'
condition.
This is dangerous because if the user has added a lot of tanks,
such loops can reach 'tank_info[MAX_TANK_INFO]'. This is an
out of bounds read and if the 'name' pointer there happens to be
non-NULL, passing that address to a peace of code that tries
to read it (like strlen()) would either SIGSEGV or have undefined
behavior.
Clamp all loops that iterate 'tank_info' to MAX_TANK_INFO.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
