The events were static on the canvas even if the profile changed its size
because of a toggle of the partial pressure gas. This patch makes events
move on the canvas to their correct place.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The first depth label of its axis is always zero, do not show it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That particular dive didn't have a temperature, and thus we got a crash
while accessing the last temperature text.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the partial pressure graph can have smaller pressure labels than
all the other labels on the profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously all text in the new profile was deawn in the same font. With
this change the labels on all axes are smaller.
It might be even better to allow per-axis configuration of the label size
as along the time axis the bigger size looked better. But especially for
partial pressures this looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user never clicks on the log and dump checkboxes (and that's what
we expect to be the case by default), then the log / dump flags (and
filenames) were never initialized.
I am reasonably certain this will close the following three bugs, that all
show the same symptom: they behave as if libdivecomputer dump was set,
even if it wasn't.
Fixes: #426Fixes: #431Fixes: #435
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Used gas mixes and gas changes are imported. Also po2, ndl, cns and
ceiling are added to profile samples. As far as I can tell, the Searwater
Desktop shows ceiling in 3 meter (or feet equivalent) steps, but stores in feet
(or probably meters). I just use the value reported, no conversion to 3 meter
steps.
Fixes#432
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sqlite database from Shearwater Desktop log software is imported. Just
the basic information like location, buddy, notes and dive profile
(depth and temperature).
This is tested with a DB in Imperial units, thus metric input might
contain errors.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the opening of DB connection to occur before DC dependent code.
This way we can try to detect log software before calling the DC
dependent import function. This prepares for adding support for
Shearwater sqlite database.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last temperature text used to have the same align flags
as all the other texts: Right. this makes it much more appealing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code shamelessy copied from the old profile introduced
a bug where the old temperature was not correctly shown.
I'v added a new member to the class that will store the
last valid temperature, and use that to calculate if there's
a reason or not to display it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just removed the unused tanks from the toolbar,
since it's just a removal of something on the ui
related code, it's good to see how much verbose
the xml to generate the UI is.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit was jointly authored by Pedro Neves and Willem Ferguson.
Pedro added a FAQ section to the manual. Many long lines of text were
broken into shorter lines.
Signed-off-by: Willem Ferguson <willem@willem-Precision-M4700.(none)>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First attempt to use the tools on one of our source files.
So far so good. Not perfect, but a HUGE improvement.
Most importantly it effortlessly fixed the Allman style braces introduced
in commit 51220f26ef ("Add recent files to main menu.").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The struct / class regex was way too relaxed.
Having the parent class on the same line usually looks better.
clang-format appears to do something odd with continuation strings - even
with UseTab: Always it indents those with four spaces.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add(up to four) recent files to File main menu.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This hasn't been tested enought, but it seems to get really close.
It assumes that clang-format is in your patch.
Run
perl scripys/whitespace.pl FILENAME
and you'll get a diff of what it things is wrong with that file.
If you like what you see, simply pipe the output into patch -p0
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
rint() is "round to nearest integer", and does a better job than +0.5
(followed by the implicit truncation inherent in integer casting). We
already used 'rint()' for values that could be negative (where +0.5 is
actively wrong), let's just make it consistent.
Of course, as is usual for the messy C math functions, it depends on the
current rounding mode. But the default round-to-nearest is what we want
and use, and the functions that explicitly always round to nearest
aren't standard enough to worry about.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should *not* default to the incorrect "1 bar". Instead, we should
leave the resuling pressure at 0 mbar, which leaves visual entries empty
and uses the default surface pressure for calculations.
Reported-by: Pedro Neves <nevesdiver@gmail.com>
Cc: Patrick Valsecchi <patrick@thus.ch>
Cc: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we move, shrink or expand the depth axis, the
meandepth should also change it's position. this
patch adds that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The extra axis labels on the Temperature and Cylinder Pressure
graphs are not wanted in release mode as they create a lot of visual
clutter, but they are useful to have in debug mode since we can then
better understand what went wrong.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Same as the last commit, but for cylinder pressure. Another bug
was spotted, where the mean depth line does not move to the correct
location after a axis-size-changed - fixing that on next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds shrinking of the Temperature axis when partial
pressures are shown. This adds an unwanted side effect however,
the axis started showing it's values - and we didn't do that on
the gtk version or on the old profile. While this is good for
debugging, it's not wanted for the software if it's on release
mode. I'll fix that in due time.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user checked the option to show or hide the partial
presure graph the size of the profile graph was kept the same;
usually I do those changes on the objects themselves, on the
settingsChanged method, but since the calculation of the
size of the profile was done on the ProfileView class for
consistency with the other objects, I had to change it there
too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The coding style for switch isn't the prettiest, but let's at least keep
things consistent.
Also, those ugly break statements never got reached, anyway.
And there was no need to re-declare and re-generate currentString.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't have nested loops with the same loop variable. Really. Even if it is
legal C++.
And don't declare local variables more than once. This will only cause
issues later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you need to use this->error to distinguish the local variable from the
object membe that should be a hint that maybe you didn't pick the best
name for the local variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the variable was inside of an inner scope this was technically legal,
but it's just too annoying for words.
(The diff in the commit doesn't make this obvious, but outside the for
loop in the same function there is a divedatapoint *dp, so we had a
pointer to divedatapoint and a divedatapoint with the same name...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I could have gone either way - the other alternative would have been to
remove the argument to the function. But since current_dive is a macro
and since the semantic of the function make sense with the argument being
passed in, it seemed better to just not use current_dive in the function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
SAC should be calculated in relationship to surface pressure, not "1 bar".
I also realize that we have a few other cases where we do the same
mistake: the partial pressure calculations do things like
po2 = o2 / 1000.0 * depth_to_mbar(sample->depth.mm, dive);
which is wrong as well - the partial pressure is also relative to
standard atmospheric pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* ensure include guard to every header
* comment endif guard block
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The section on the main menu descriptions has been changed a little bit to
reflect the current menu structure.
The section dealing with exprt from other dive software has been changed
to appear more user friendly, with three new icons.
Signed-off-by: Willem Ferguson <willem@willem-Precision-M4700.(none)>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If I click in the Preferences Dialog on the 3 dots to choose a default
file to load and cancel the opening FileDialog an empty string is returned
and set to the coresponding QLineEdit.
The new behavior (and mostly expected) is to update the QLineEdit only
if there is a filename returned from QFileDialog.
Signed-off-by: Patrick Majewski <dive@patrick-majewski.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
