Currently this does nothing, but since "dive photos" can also mean
photos that were taken during the trip to the dive, some of them
will not be visible on the profile. this currently shows nothing,
because I didn't work out the Model bits yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This has a few classes: the model is the list of pictures for the current
dive, the delegate is how this pictures will be displayed on screen, the
widget is the collection of delegates, and the DivePictureThumbnailThread
is a worker-thread to generate the thumbnails so the UI will not freeze.
[Dirk Hohndel: added the new files to subsurface.pro]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead wait until all pictures have been set and plot that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialogs where hard-coded and some variations of themes
could broke the placement of the text on it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should fix the infinite recursion on OSX and also clean a lot of
code, which is also very nice. <3
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the divedatapoints and functions that deal with them.
It changes plan_add_segment(), create_dp(), gasToStr(), and tankInUse() to
consume gasmix instead of o2/he.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is step one of many to use gasmix instead of int o2/he.
Right now some of these changes look ridiculous because after changing a
few lines we immediately go back to o2 = get_o2(gas). The reason is that I
wanted to convert a hand full of functions at a time. So in this commit I
only change validate_gas(), get_gas_from_events() and get_gasidx() to use
a struct gasmix instead of int o2, int he.
This state builds and survived some mild testing. Let's continue on top of
that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead calculate this information on the fly, taking into account all
dive computers on the dive in questions.
There is one wrinkle to this - previously we abused the '.used' member to
make sure that a manually added cylinder didn't disappear the moment it
was added (think of the workflow: you add a cylinder, then you add a gas
change to that cylinder -> right after you add it it is unused and would
not be shown).
I am thinking that we might have to add the "manually_added" property to
the properties that we store in XML / git.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should never pass permille values around as integers. And we shouldn't
have to decode the stupid value in more than one place.
This doesn't tackle all the places where we access O2 and He "too early"
and should instead keep passing around a gaxmix. But it's a first step.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This part of the algorithm was off as part of it (but not all of it -
crazy, I know) assumed the old semantic for gas changes where the new gas
was introduced at the end of the segment and not at the beginning.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We tracked gas used by simulating a dive with a cylinder - but for that we
need a cylinder size and working pressure. If the user just enters a gas
but no cylinder data (likely in order to figure out how much gas is used
so that she then can pick a big enough cylinder), we didn't show any gas
consumption.
It kinda sucks to add another member to the cylinder structure, but this
seemed far more reasonable then some other, global structure that
independently tracks gas usage. This just seemed to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas switches are now for the current segment, not for the next.
We can only track gas for cylinders for which we have size / working
pressure information. Print a warning for others.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we have size information including working pressure for a cylinder, we
already track the expected pressure at each way point - this way we can
also alert the user if more gas is consumed than is available in the
cylinder.
This does not include sound planning strategies like "rule of thirds". It
simply assumes that you won't be able to breathe down the cylinder past
about 10bar (using 0 as cutoff seemed silly).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 7d42b53bba.
With the addition of the dive plan details widget we no longer want to
show the deco points in the dive planner points table.
Conflicts:
qt-ui/diveplanner.cpp
We want the disclaimer in the final dive that can be printed, but it's
distracting when shown while planning the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching to / from plan mode, we switch to show either the dive plan
detail widget, or the dive list widget.
So far this widget does nothing. This just makes sure it's there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Staring at the stack trace it seems that it gets into an infinite
recursion when trying to recalculate after being alerted to a change on
the ruler. I cannot recreate this here (not on Linux, not on Mac), but
here's a random attempt to prevent the issue: simply refuse to recalculate
the ruler while in Add or Plan mode.
Crude, but might show us if this really is the issue. Otherwise it's easy
enough to revert this change. The qDebug() in there should tell us if
people on a Mac do indeed see this even without moving the ruler around in
Add or Plan mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Silly bug - while we normally fill the cylinders in a tight group with no
"null" cylinders in the middle, since we copy from an existing dive and
since that may end up with an odd sequence of cylinders, we need to
continue looking at ALL cylinders and not stop with the first one that's
empty.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise the change to the Cylinder widget would trigger a recreation of
the dive in an inconsistent state.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was introduced in commit fc13361079 ("Don't crash if we try to save
a empty plan") - but it doesn't seem to make any sense. It is perfectly
reasonable for the diveplan to have no datapoints at this spot - we are
just about to call createTemporaryPlan() which will fill those datapoints
from the mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This never made any sense. If we have NO datapoints then go and cancel the
plan? And anyway, we already check this higher up in the call stack.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When copying cylinders from an existing dive, the mod of the cylinder
might not be set. Assume a conservative 1.4 pO2 and fill in those data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In analyze_gaslist() we were only keeping gases that had their .depth
above the current depth, i.e. where we could switch to in the future. Now
we take note as well of the strongest gas that we could have already
switched to and switch to it before we attempt to ascend.
[Dirk Hohndel: minor whitespace and code cleanup]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The smaller than and greater than operators should be quoted before
inserting the <br> tags in HTML. Otherwise breaks will be quoted which
corrupts the format.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner would offer an text-editor if the user double
clicked it's remove column. forbidding that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Besides not deleting them, we shouldn't offer the icon for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch forbids deletion of the Deco Stop from the
QTableView that holds the model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to create them, even if we don't display ( only because it
was a pain to correctly track them from the model ) - so, hide them
if it's not entered by mouse, but a deco one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching from PLAN or ADD mode to PROFILE, we
kept the dive handlers visible, not anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we avoid trying to create a dive from the plan while the plan
references the cylinder that has just been changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is a little bigger than I usually prefer, but it's all
somewhat interconnected.
- we pass around the cylinders throughout the planning process and as we
create the plan we calculate the gas consumption in every segment and
track this both in the end pressure of the cylinder and over time in
the samples
- because of that we no longer try to calculate the gas consumption after
being done planning; we just use what we calculated along the way
- we also no longer add gases during the planning process - all gases
have to come from the list of cylinders passed in (which makes sense
as we should only use those gases that the user added in the UI or
inherited from a the selected dive (when starting to plan with a dive
already selected)
With this patch I think we are close do being able to move all of the
planning logic back into the planner.c code where it belongs. The one
issue that still bothers me is that we are juggling so many dive
structures and then keep copying content around. It seems like we should
be able to reduce that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When planning a dive, the dive could use more gas than is in the cylinder.
So getting a negative end pressure is a useful indication to the user that
there plan might not be a good one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the infobox invisible in planner (it really doesn't provide a lot of
useful info while planning a dive and more likely gets in the way).
Make the calculated ceiling always visible in planner and add mode.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Double quote will break HTML export when it is e.g. within notes.
Similarly < and > characters are treated as HTML tags unless quoted
properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will help in searching based on tags
Also some minor coding-style fixes
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The note is prefixed by a colon
Fix the output of Null values of dive master, dive suit, location and buddy.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- check for zero Kelvin degrees temperature
- show dives in group of trips
- show the number of dives starting from 1 as in subsurface application.
- produce localized output as selected in the user's preferences.
- use < and > on the arrow buttons in the HTML file.
- Call the translation functions for text strings
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Exporting the raw dive list into JSON format for later viewing with html
and js files. Also some worldmap code organizations.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to do this when calling plan() from createTemporaryPlan() -
we only want to record the dive at the end of createPlan().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
