This patch addresses several issues:
1) At the beginning of the manual a section was rewritten, just after
"How to open a new log book", to explain to the newby what the
different options are for enetering dive data into the Subsurface
dive log.
2) A new section "A diver's introduction to CSV files" was written as
a boxed section.
3) The section dealing with CSV import from dive computers was
shortened because much of the information was transferred to
the new section in point 2) above.
4) The section dealing with CSV import from manually kept dive
logs was expanded, specifically giving more information
about import from manually kept dive logs in spreadsheets.
5) Appendix D was added, detailing CSV export from LibreOffice,
OpenOffice and Microsoft Excel.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manually inserting set-point changes at negative times (left
of the profile) caused the setpoint to end up at stupid values
(probably some signed/unsigned confusion). This patch aligns
them with the start of the dive.
Fixes#774
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we suggest building with our marble branch we need to tell people to use
SPECIAL_MARBLE_PREFIX=1 or the build process won't find the correct library.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* only build a static libdivecomputer
* only build the libgit2 library, not the executable
* don't echo all the symlinks when fake-installing libmarblewidget
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now assumes that a running changelog is maintained in
src/debian.changelog, i.e., at the same level as the subsurface tree; the
organization now should look like this:
src/debian.changelog
src/subsurface # subsurface git checkout
src/subsurface/libdivecomputer # libdivecomputer git Subsurface-xx branch
src/subsurface/marble-source # marble git Subsurface-xx branch
src/subsurface/libgit2 # libgit2 git checkout
Instead of running dh_make to create all new debian build files, we add the
necessary files in our script.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF only supports a specific set of alarms. Some events also don't map
to alarms but map to other types of elements in UDDF.
This patch adds a map of the accepted types. Where a map doesn't exist
the type will not be mapped to an alarm, the option then remains to
map it to another kind of element, in the same way that happened with
headings and gas switches.
This removes the need for the specific exclusion of heading and
gas switch, as they are now simply not included in the map.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mention our Subsurface branches of Marble and libdivecomputer
Massive update of the Linux build instructions
TODO: correct package lists for the different Linux distributions
TODO: update instructions for Mac
TODO: update crossbuild instructions
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These values are treated as false upon starting Subsurface. Thus they
should be set to false as well. Otherwise extra graphs are drawn to the
profile when exiting the preferences dialog.
Fixes#783
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added 3 more images to the User Manual (Appendix E).
Images illustrate the creation of .CSV file from LibreOffice Calc.
Signed-off-by: Pedro António Neves <nevesdiver@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Changed section 4 name to: Storing dive information in the logbook (to keep it in line with the other titles)
- Added some introductory text to section 4, together with links to the appropriate sections on the manual
- Changed figure Import_CSV2.jpg to reflect date format options
- Added an Appendix (E) explaining users how to create a .CSV file from LibreOffice Calc
- Added 3 more images to illustrate Appendix E
Signed-off-by: Pedro António Neves <nevesdiver@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using node() along with the node-set seems to grab the weights properly
for me.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calling Subsurface with -v now gets you debug output. Of course, with a
regular "release" build of Marble you still won't see much. But with the
changes in the special Subsurface-testing branch you actually get some
very useful information when debugging a lack of maps in Marble.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that our UDDF export is adding time after the event name. Thus we
need to add reading the following time as well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adjust to UDDF 3.2 specification and use proper tag name for air
temperature.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The switchmix values must be concatenated properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to export only used cylinders to divelogs.de. The
detection is based only on o2 percentage as per our test dives. However,
the new cylinder id would be better, but that does not exist on old
dives.
Fixes#757
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Generation of PDF document fails if accented characters are used in
references.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These files are left behind when creating PDF fails
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug when the first sample doesn't contain pressure info.
This fixes that by selecting the first with pressure info.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XDS schema for UDDF is very sensitive to ordering of elements
so I've rearranged many of them to match. Elements in:
- informationbeforedive
- waypoint
Adjusted namespace of export to correct UDDF namespace.
Updated remaining references to mixes it include prefix 'mix'
Moved equipment from informationbeforedive to informationafterdive *
Change trip ids to generated IDs and updated tripmembership to use
the trip id instead of the name *
* These constitutes a difference in XSD and the documentation. I will
raise these issues with the author.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed underscore from buddy name elements
Added 'mix' prefix to gas ids. Ids must not start with a number.
Added mandatory profile data with empty tags.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XPath was incorrect for parsing divecomputers into the equipment
section, meaning they dont get inserted.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with buddies, sites could contain characters which are not valid
in Ids. Also, it is very possible to have duplicate site names.
This uses an XSL generated id to prevent any issues.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is instead of using their names, which may contain illegal
characters.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add name at <generator> level, and add additional <homepage> in
contact tag.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we strip the .git data from the source tree (to conserve space and not
violate the packaging guidelines - or at least not violate THAT packaging
guideline) we need to create the correct revision before the tar file of sources
is packaged.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Forward the sample set-point setting as otherwise all ascents are
planned on OC.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If for some reason the diluent is pure oxygen, there is a zero
divided by zero error in the partial pressure calculation. This
patch prevents it.
Fixes#774
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
