And adapt a new CMakeLists.txt file for it. On the way I've also
found out that we where double-compilling a few files. I've also
set the subsurface-core as a include_path but that was just to
reduce the noise on this commit, since I plan to remove it from
the include path to make it obligatory to specify something like
include "subsurface-core/dive.h"
for the header files. Since the app is growing quite a bit we ended
up having a few different files with almost same name that did
similar things, I want to kill that (for instance Dive.h, dive.h,
PrintDive.h and such).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Usually, we try to ascent to the next stop and check if we break the
ceiling while doing that. This patch adds a preference value to rather
check if the ceiling is above the next stop before attempting to ascent.
The difference if off-gasing during the ascent is taken into account.
Logically, it does not sound like it could be relevant to ignore that
off-gasing but it leads to more conservative schedules and it seems
the original Fortran VPM-B implementation does just this. So one could
argue it is part of that model (if it makes sense or not), so we should
at least give users the possibility to turn this on.
Maybe we should even make this the default for VPM-B.
This patch just addes the code to have the value in the preferences and
the planner to act accordingly. There is no UI for it, yet. To test, you
have to set it in the code. There could be a later patch with a UI if people
like to have it.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't perfect (if you make multiple requests things could go badly),
but it's better than just slapping the new password into the settings,
even if the update failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed recreational mode from ui and pref and replaced it with
new deco_mode enum.
Added radio button ui selection.
Set default deco_mode to Buehlmann algorithm.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Add the option to only switch at required stop to the planner UI. This is not actually used yet.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simple preferences infrastructure with default prefs, prefs and hooks for
the Qt Settings system and our preferences ui.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the option for a minimum gas switch duration to the planner UI. This is not actually used yet.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Save and load a usually unused copy of the preferences with the units that
were active the last time the dive list was saved to git storage (this
isn't used in XML files); storing the unit preferences in the data file is
usually pointless (that's a setting of the software, not a property of the
data), but it's a great hint of what the user might expect to see when
creating a backend service that visualizes the dive list without
Subsurface running - so this is basically a functionality for the core
library that Subsurface itself doesn't use but that another consumer of
the library (like an HTML exporter) will need.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just deals with the mechanics. There is no UI to enter / change this
URL (and that's intentional), neither is it used, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correctly tracking the status of our authentication with the cloud service
is non-trivial, especially since the user may quit Subsurface between
registering and verifying an account, they might even register on one
machine and verify on another.
This tries to make sure that when in doubt we check with the cloud service
backend. And we show errors in the UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now sets the preference variable / config entry and keeps them in
sync. Doesn't actually change the behavior at program start, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far there is no mechanism to actually create a repository on the
server, so this only works with the two test repositories.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cloud storage makes more sense that remote storage - at least I assume
that more people are used to thinking about "storing things in the cloud".
Don't use PIN or passphrase, call it a password everywhere.
Don't use copy_string() to copy the password - the git credentials routine
asserts that password is not NULL, so make sure we at least have a pointer
to an empty string here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows entering / storing the PIN (aka passphrase) for the ssh key.
The email isn't used, yet - this will be used by the automated backend to
create a unique git repository that will turn into the remote storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While we don't expose it as this to the user, we'll need an ssh key and
potentially a passphrase in order to communicate with the git server in
our infrastructure. This simply sets up a way to store the passphrase.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a field to the units preferences to have GPS coordinates
show as decimals (as for example Google maps does it).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since most regulators have an intermediate pressure of 10bar
the minimum value is 10 while the max is 99.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adopts the planner to the needs of the recreational diver. Rather than immediately
starting to ascent doing deco stops this mode, this mode stays at the last manually
entered depth for the maximal time before mandantory stops appear (NDL). It does not
change gas but keeps using the last used cylinder.
TODO: * Grey out unused UI elements of the planner in this mode
* Start ascent before gas runs out (or into reserve)
* Do a 3min @ 5m safety stop.
Fixes#840
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds to the prefs struct the variables last_stop, verbatim_plan,
display_runtime, display_duration, and display_transitions from the
planner so their values are saved from one session to the next.
The widgets for some of those settings had default values in
plannerSettings.ui; remove them since the new code in
subsurfacestartup.c takes care of initializing them.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just a extern "C" wrapper around QStandardPaths::AppDataLocation,
while also making sure the entry exists.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch creates the possibility of viewing the individual sensor
values when the po2 button on the profile toolbar is activated. This
follows exactly the procedure for optionally displaying the setpoint
values while viewing po2. A checkbox in the preferences panel determines
whether sensor information is shown. By default it is set to OFF. When
checked, and the po2 button is activated, sensor1 values are shown in
grey, sensor2 in blue and sensor3 in brown.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a CCR dive is viewed and the toolbar button for PO2 is activated,
both the PO2 (green line) and the O2 setpoint (red line) are shown.
This allows evaluation of the PO2 in the CCR loop with respect to the
pre-configured O2 setpoint.
The setpoint graph can be disabled from the Preferences/Graphs tab
by checking the appropriate checkbox.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All Facebook related stuff now is on SocialNetworks.h/cpp
this makes it much easier to implement things and looking
for bugs.
working:
- logging in
- getting user id
- getting album id ( or creating it )
*much* more testing is needed, of course.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculations for passive semi-closed rebreathers are pretty much like OC
except the pO2 is lower bey a certain (SAC dependent) factor. This patch
introduces the corresponding calculations in case dctype == PSCR which is
so far never set and there is currently no UI for these calculations. As
pO2 is SAC dependent it takes a certain attempt at getting it and drops to
defaults from the prefs otherwise.
As there is no UI at this point and I also don't have any dives, this has
not received much testing, yet, but it compiles. At least.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get rid of the old default font on Windows (Calibri) we are
going to near ridiculous length. The reason for this is that we in the
past always saved the default font in the settings (how stupid was that!)
and so now even with a new default font in place, since there is an
explicit font in the settings we take that instead of the default.
Instead of requiring our existing users to use a registry cleaner to get
the correct default font on Windows 7 and later (the VAST majority of our
Windows users at this stage), we simply explicitly ignore that old default
font.
There is one very nasty side effect. A user cannot set Calibri as their
font of choice on Windows 7 or later (because we always force them back
onto Segoe). Given how much nicer Segoe looks I think this is an
acceptable flaw - let's hope this doesn't come back to bite me in the
future.
At the same time this changes the default font size handling. We try to
get the default font size of the OS so the app looks "right". This seems
to not give me the expected result on Linux with KDE, but maybe I'm doing
it wrong? Looks good when testing on Windows.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This breaks compatibility with old preferences, but it's a single
key and not that very important so I don't think it's a bigger issue
I've renamed prefs.animation to prefs.animation_speed to denote
that it's a value, and not a state.
Also, fixed the places that were treating it as a state (on/off)
to treat it like a correct value.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The values for drop_stone_mode, bottomsac, and decosac are typically the
kind of personal data specific to a diver that is unlikely to change
from one dive plan to the next.
This patch stores/restores them to/from the preferences file. For this,
it adds bottomsac and decosac to the prefs structure; drop_stone_mode
was already there, though not stored/restored.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a 'Use default file' button on preferences in a way
that doesn't clutters the interface.
Fixes#630
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to be needed for the correct print of the profile,
What was happening on the print code was that the profile even in print
mode was doing animations, and we were getting a frame of it and trying to
print it.
Also, a bit of code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the toggle picture button and hoocks
it up with the rest of the code. I'v also changed a call
from ProfileWidget because it caused errors on the ui
generated code, where it would try to call an still-to-be
instantiated object.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no reason to treat drop_stone_mode different from the rest of
the planner settings, so move it to our prefs structure.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the corresponding checkbox is checked the planner does interrupt
pure O2 deco after 12min for 6min on cylinder 0.
To make this work for air I removed the gasmix_is_null logic.
I guess that makes the planner feature complete for the next release.
[Dirk Hohndel: trivial merge into latest master]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Too much noise on the headers, this commit remove uneeded
headers when they are uneeded.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That provides some UI elements that were recently introduced with function
of allowing the ascent rates of the planner to be configured by the user.
I tried to make it work both with senisble as well as with imperial units.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂.
They all mean the same, but it's better to be
consistent
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
