This enables the dormant OSTC3/OSTC Sport firmware update code, now when
the hw_ostc3_device_fwupdate call is available in libdivecomputer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The successful message was emitted in a some what older way then the
other messages so it was always emitted, even on error.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a delegate to simplify the handling of gas components and
the change depth.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a delegate for the type column to choose the type value for
gases that is less confusing then the raw value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the OSTC's the salinity is in kg/l and is stored as kg/l * 100
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The OSTC supports a bit different functionalities than the OSTC3 does.
The "unsupported" bits are
setBrightness
setCalibrationGas
setCompassGain
setDiveMode - Bult into setDecoType (OC/CCR)
setDiveModeColor - Lots of different colors
setFlipScreen
setLanguage - Controlled via flashing different firmwares
setPressureSensorOffset
setUnits
setSetPointFallback
setCcrMode - there are some ppO2 reading functionality in the fist gen
OSTC that we don't care about, and the rest is controlled
via choosing a CCR deco algorithm
Also the OSTC have a notion of number of dives it has done, so this adds
ui for that value.
There are also differences in how some values are handled. Ex the OSTC
don't have fixed samplerates that you can choose between. You can rather
just set your sample rate to X seconds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently don't support update firmware for the OSTC3. Where waiting
for support in libdivecomputer for that, so disable that button for now.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost all of our other classes have the ui class as a class member in
the controller code. This switches ConfigureDiveComputerDialog to that
model.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the Update Firmware button if you choose a device that we don't
support update firmware for.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't allow creation of backup files or writes to the computer before we
know we got some data, either from a backup file or from the actual
device.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is still missing lots of values which are now set to 0 with rather
unfortunate consequences (for example, setting Saturation and Desaturation
to 0 turns off the NDL / Deco calculations). So this code right now is
quite broken.
But at least this fixes the reported crash and gets some valid data
initialized.
Fixes#744
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code connects up the configuration ui with the backing
data structures thats gets read/written to/from the devices.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This builds up a ui to use for all the settings for the Suunto Vyper
family devices. Some of the fields are pure information, eg, max depth
and number of dives, so they are marked read-only.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setpoints filled in into the ui where never set on the devicedetails
object so they where never propagated to backup or write settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When backing up dive computer settings to XML, the confirmation
dialog shows the default file path. This patch fixes that by
displaying the correct file if the user changes the backup location.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch improves on the error reporting for the dive computer
configuration dialog to use config->lastError.
The previous code was using a different argument in each function,
which lacked uniformity.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
To avoid confusion, this code update makes the status text empty whenever
there is an error message. This makes the error message more prominent.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Changes the layout of the ConfigureDiveComputer dialog to use a
list of supported computers on the left, with a stacked widget
showing the configurable details.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch implements the first step towards OSTC 3 firmware update.
Its not much, just file selection, but I will build up on it from there.
Implements a thread to initiate firmware updates. Currently, this is
for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements support for reading, writing and backup/restore of set point
settings for the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements reading, writing and backup/restore of OSTC 3 Dil Values
(setting 0x15 to 0x19)
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements writing OSTC3 gas settings to the device.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Implements the reading of OSTC3 Gas Settings. These are settings
0x10 to 0x14
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
I am adding more OSTC 3 settings as I go along. Here, I have
added dive mode and saturation.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Changes the dive computer configuration dialog to use a
tabbed interface. This will make it easier to add new
dive computer models to the interface.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds support for more OSTC 3 Settings to the reading, writing,
backup and restore functions. These settings are: last deco,
units, sampling rate, salinity, dive mode colour and compass
gain.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
The ConfigureDiveComputer class now has functions for complete
XML backup and restore. These dump the loaded settings on a
dive computer to an XML file, and there is an option to
restore them.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch enables XML backup. We can now save the settings
to an XML file. Currently this backs up just the basic stuff
such as custom text, language and brightness.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
After splitting dive computer configuration classes, the date/time
setting had not been ported. This adds the same to the classes.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This patch polishes up on all classes added for dive computer
configuration to give a clean workflow. The classes can now
write and read data from the OSTC 3.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
This splits the code in configuredivecomputer.cpp into multiple files.
The read and write threads are moved to configuredivecomputerthreads.h/cpp,
and the device details class is moved to devicedetails.h/.cpp
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds a setting to control the device's brightness. Currently I
have only the OSTC 3. Will add more afterwards.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Adds a class to write settings to dive computer, and modifies
the existing ones to integrate it.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Added classes for reading data from dive computer. This is
at the basic level and I will expand it as I go along.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Using code from 'downloadfromdivecomputer' class, this code
loads the vendors and products to the respective comboboxes.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Create a dialog for reading and writing settings to and
from dive computers, with a menu entry in MainWindow to
open the dialog.
I will build up on this dialog and change it as needed.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
