as we load dives and dives, new DiveEvents will be created
but the transparent pixmap never deleted, also this makes
the transparent pixmap only for the correct event, not for
all of them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers appear to have heading data in every sample. In order
to avoid a completely cluttered dive profile we no longer show a flag for
every heading event but instead show a basically transparent pixmap (which
is invisible to the user) that allows us to report the heading information
in the tooltip but leaves the profile uncluttered.
Fixes#586
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the .txt to the list of all dive log files as this is the file we
expect to be opened for Poseidon Mk6 log files.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems like QMarginsF and QPageLayout were added quite
recently - in Qt5.3!
We attempt to support older versions by using something
found in the Qt4.7 documentation.
Patch also fixes small ordering issue where top / left
margins were swapped.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All the print options will be stored after the user closes
or "cancels" the print dialog.
There seems to be no good way to store the last
selected page size, because print dialogs are different and
some just list them as strings - A4, A3, etc.
The patch also applies the following changes:
- renames display.h's 'struct options' to 'struct print_options'
as these were really just for the print dialog
- the print_options dialog now stores more options as 'bool'
- demote PrintDialog's 'printOptions' to 'private'
Fixes#653
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is no longer just a tag filter. Also, since we use this entry (and
its shortcut) like a toggle we should mark the menu entry accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last of the series of Macros that I'll do to ease
the creation of a QStringListModel based filter.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
New method to simplify the creation of 4 of the common
methods for each filter in an easy way. There are
a few other methods that I'm also thinking on how
to do this.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
samething as the other commits, use common code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setData of any filter based on a StringList with
checkboxes should be the same, so let's use the same
codebase for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just to simplify the creation of more filters.
more macros will be used, because I tend to abuse them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already have a bunch of filters, let's pack them together
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Depth is often mentioned in a length unit, but what we care about is
pressure. When diving in fresh water the pressure is lower than the same
depth in salt water. This adds support for using different salinities in
planning.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By popular demand, this changes the names of the Suunto Safety levels.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way other parts of the code can act on the "hidden_by_filter" state.
This also cleans up the way we track if a dive is hidden - do it in the
multi filter instead of the individual filters.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Code to clean the filters. Maybe I'll also need to call this upon
closing the dialog?
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clicking on the close button will close the widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Buttons to close, minimize and clear were added. We need better icons.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
a bit of extra spacing was necessary to get rid of the scrollbar.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The extra info didn't had a Layout set, this makes the
design hard and not resizable. fixed by using a layout.
I also changed a ScrollArea for a GroupBox, since the
Model already has a ScrollArea.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The .location and .notes fields can end up being NULL,
in which case copy_string() is safer.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a rather brute force implementation. It might be worth while
caching this information - but I'd like to do some benchmarking, first.
Sadly this code also shows that there are some bugs hidden in the
selection code when filtering is present. When a trip is selected all
dives in the trip get selected, even those that are not visible under the
current filter.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ppO2 represented with 2 as subscript.
Special l symbol for litres.
Capitalisation to bring in line with existing style.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Spelling fix for ampoea
Remove bogus HTML string from UI file
And fix the translation sources accordingly
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And added a missing liquivision item in file open dialog.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Try really hard to ensure there remains a valid selection. Only if none of
the dives are selectable should we give up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we end up trying to restore the selection where the selected dive is no
longer visible (i.e., it's now filtered away), this code caused a crash by
falling first() on an empty list. Let's not do that.
Fixes#758
c++ have some idea about in what order things should be initialized.
This makes us comply with that order.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The buddy list generated by the buddy tag logic gets separated by
,<space> so this trims away any leading spaces from the buddy name.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way any extra data probided by the dive computer is visible to the
user (without other processing). This data cannot be edited by the user as
it reflects the information given by the dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While in a multi dive edit we want to apply our usual semantics (only edit
things that are the same as in the current dive), when doing an explicit
copy and paste that doesn't seem to make sense. So we manually override
that behavior.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we only applied the type of tank (description, volume, working
pressure) to all selected dives where the tank description matched.
With this patch we also copy the gas mix into all matching cylinders.
Additionally this addresses the issue that we should have a separate copy
of the cylinder description string for each dive.
Fixes#754
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When replannig a dive, offer another button that creates a new
dive rather than overwriting the old. This should help in creating
several versions of a planned dive (longer/shorter, deeper/shallower
etc). Note that this makes dives that start at the same time not
influcence each other's deco.
Also, only the first of a row of simultaneous dives contributes to
the tissue loadings of later dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems, on Linux qrgba does not work properly making
stars with alpha red when selected. So the patch returns
to just rgb without transparency but decreases the contrast
to white by a factor of 5.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oddly Qt left the trips selected (but all dives where unselected in the
UI). This got our internal state rather confused. With this change we
clean up that mess and go back to just having those dives that were
originally selected and are still visible show up as selected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only dives that remain visible stay selected. And if all selected dives
are removed by the filter, pick a new selected dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As my wife kept pointing out for a long time, the greyed out stars
were heavier as images than the yellow selected stars. This patch
makes the grey stars semi-transparent.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Acked-by: Andrea Fischer-Helling <andrea@fraufischer.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed to get the correct maxdepth when replanning
leads to a shallower dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing tanks we triggered a replot - but that overwrote the
displayed_dive with the current_dive before the remaining data from the
displayed_dive was used to edit the current_dive.
So now we delay this until later in the function, this way copy of paste
of both tanks and weights works.
Fixes#753
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hunting down a different issue I managed to cause a crash here when trying
to copy a string that ended up being NULL.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tool tip not needed, text already provided on mouse-over
Corrects captitalisation style
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use 2 subscript on ppO2
Adhere to agreed capitalisation style
Reset instead of resetted
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we only store things in the preferences if they are different from
the default, the existing code that simply compared with the settings
value didn't work when people used the defaults.
We now compare to the actual preference at runtime which should address
that.
Fixes#731
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
forgot to add that we used multiselection when I recreated
the dive list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Multiple layouts had the same name="gridLayout_3". Fix by shifting all
the numbers up by 1.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was comparing the strings in the opposite direction.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the skeleton of the functions, nothing working yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The multifilter widget is a container with all the filter
widgets inside of it. currently there's just one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It was impossible to remove the tag filter after opening it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the possibility to collapse the pannel in the
mainwindow when seeing everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch moves the filter from the collapsable pannel
and puts it in an uncollapsable way above the dive list.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yikes this was stupid. We mixed changing the displayed_dive and the
current_dive. So we'd pass in the displayed_dive and a pointer to the
dive_computer structure of the current dc in the current dive. Oops.
This makes much more sense. And:
Fixes#738
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We forgot to clear out the pre-existing tags. We did this for the actual
selected dives that were being edited, but not for the displayed_dive, so
deleted tags showed up again on screen (even though they were correctly
deleted from the selected dives in the dive list).
Fixes#732
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit d5f19c43c9.
With the changes to the headers in commit 3515ad71c1 ("Divelist: remove
units from header, add tooltip") I think this isn't needed anymore and
actually reverting it creates a cleaner look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The whole "duration in seconds" is being way too OCD about the
information, and just makes it harder to read.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this I was only able to close it by choosing to print.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should help with the issues we are having with alignment / visibility
of the relevant information in the divelist.
Most people will never switch the units (or maybe switch them once, the
first time they use Subsurface). So having the units shown in the table
header quickly becomes redundant - yet having the units in there causes
all kinds of layout issues.
This patch adds a tooltip to both the header and the main data area of the
divelist. The tooltip shows the column name plus unit and the column
header no longer shows the units.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When entering a gas switch manually, explicitly show the different tanks
that are available and correctly switch between different tanks with the
same gas.
See #702
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of the 30 second heuristic we only assume that this is an explicit
first gas if the event coincides the first sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevented import of log files other than CSV and TXT.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface can now open CAN files as an alternative to importing.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't Cobalt specific, this is specific to dive computers that
indicate the first tank that's in use with a gaschange event that
coincides with the first sample.
We need to make sure that we suppress showing that gas change event
(regardless which cylinder it goes to) and instead set the correct
cylinder index from the very start of the dive.
This works with the test data I have and doesn't seem to break thing with
any of the files that I tried... but I'm worried that this is not the
right way to do things.
Fixes#742
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents a warning caused by -Waddress, that the address
of 'displayed_dive' will always be defined.
Exact macro variant suggested by Dirk.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will parse date information from Seabear log file and skips the
"header" data to allow parsing of the CSV content.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a delegate to simplify the handling of gas components and
the change depth.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a delegate for the type column to choose the type value for
gases that is less confusing then the raw value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I fixed up the decode and finished the parse for Cochran EMC, Commander
and Gemini computers. I suspect that this code may only work with files
from certain versions of Cochran Analyst. It works with my own CAN files
and with the samples that came with Analyst v4.01v.
A seemingly arbitrary offset of 0x4914 is needed to access data.
The previous code uses 0x4a14 and 0x4b14. I suspect these are from
different version of Analyst.
[Dirk Hohndel: whitespace cleanup, add files to subsurface.pro, made sure
this compiles without the corresponding patch to
libdivecomputer (that isn't upstream, yet), cleaned up the
usage of structs, removed a few unused variables]
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the OSTC's the salinity is in kg/l and is stored as kg/l * 100
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The OSTC supports a bit different functionalities than the OSTC3 does.
The "unsupported" bits are
setBrightness
setCalibrationGas
setCompassGain
setDiveMode - Bult into setDecoType (OC/CCR)
setDiveModeColor - Lots of different colors
setFlipScreen
setLanguage - Controlled via flashing different firmwares
setPressureSensorOffset
setUnits
setSetPointFallback
setCcrMode - there are some ppO2 reading functionality in the fist gen
OSTC that we don't care about, and the rest is controlled
via choosing a CCR deco algorithm
Also the OSTC have a notion of number of dives it has done, so this adds
ui for that value.
There are also differences in how some values are handled. Ex the OSTC
don't have fixed samplerates that you can choose between. You can rather
just set your sample rate to X seconds.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The problem that we were comparing signed and unsigned ints was originally
found by Lubomir. As image times can be negative (and the comparison should
fail in that case) we need to compared them as signed.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Acked-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The icon comes from heinrichsweikamp.com, the same as the ostc3.png did.
I've emailed with Matthias Heinrichs at HW and they have given us
permission to use both the ostc3.png and ostc2n.png under the GPL v2.
They also can provide the hi-res originals if anyone needs to do more
work on these icons.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now include the Ui header file, so we can remove the forward
declaration.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The device supports a up to 60 chars custom text. This limits the
LineEdit to that amount, so users see when they reach the max limit.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a shortcut, Ctrl+Shift+C to jump into the Configure dive computer
dialog.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit a85a219df3 ("Add ability to replan a dive that we planned
before") I completely mishandled the saving of the replanned data.
How embarrassing.
Fixes#747
See #527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveLogExportDialog::export_depths()
We set a default value of 'unit' which will silence the warning itself.
Then hope that the compiler will respect the argument order i.e. call
get_depth_units() (which sets 'unit') before using *unit as the last
argument passsed to put_format().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"gridLayout_1" is used twice. Re-order the grid layouts as 1, 2, 3.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MainWindow::on_actionReplanDive_triggered():
If a dive in the divelist does not have a "DC Model" for some reason,
selecting "re-plan" from the menu will pass a NULL value
current_dive->dc.model to strcmp() and break before the debug output.
To fix that we check if the said .model value is NULL.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support for importing the logs from a Poseidon MK6
rebreather. This DC produces logs that contain of a .txt file that has
all the meta data and a .csv file that contains the sample readings. The
CSV file is different from the others in that it has a line per each
sample reading at given time. Thus we have to merge all the lines from
one point in time into one sample reading of ours.
[Dirk Hohndel: addressed some compiler warnings]
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When dropping to the bottom in plan (and add) mode, the gas label was
placed along the diagonal line from (0,0) to the second dive data point
(i.e. the one at the end of the "at deptch" segment). That looks terrible,
the label needs to be along the segment that we are spending at the
bottom.
This patch fixes that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a icon to the Vyper config page. The image is taken by me of
my Suunto Vyper. Thats the reason for the quality.
Question: Would it be ok to grab a PR image from Suunto's web page to
use here? If so they got better ones...
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently don't support update firmware for the OSTC3. Where waiting
for support in libdivecomputer for that, so disable that button for now.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Working on HTML exports to support imperial and metric units and also
custom selected units based on subsurface preferences.
User selected units is exported to settings file that will be mainly used
by listlib javascript file.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The pre-existing tissue load going into a dive can change if the start
time of a dive changes. Therefore we need to recalculate the ceiling when
editing start time (or date) of a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the existing code worked fine for editing that start date or time of
dives downloaded from a dive computer or imported from some other source,
for manually entered dives this did not work and the date or time was
always reset to the original time once the changes were saved.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ensure that there is no (clipped) overflowfrom the header.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous hard-coded solution for GTK+ didn't work on HiDPI, and a
comment hinted that even on Mac OS X it might need tuning. Find a more
generic solution that should work regardless of platform and style,
based purely on the geometries reported by the style itself.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also, generate the corresponding pixmap only once, and distribute it to
all models that need it.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The latest CCR patches had rendered the planner not usable for CCR dives.
This patch corrects this (and reenables the CCR set point column for
segments). The problem was that a new member setpoint of struct divepoint
had been introduced, but there was already po2 which had the same meaning.
This patch merges the two and renames them setpoint to prevent future
confusion.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the settings not previously available in the OSTC3 settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates a Advanced settings page for the OSTC3 and moves the deco
settings off to that page.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These settings are gas related so they fitted in the spare space in the
gas screen.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I hope this time I got it right. basically, the old code
tried to guess where the plus icon should be with a fairly
bad set of defauults.
This one patch asks for the Qt style where everything is and
uses that knowledge to make it be in a more sane position.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Giuseppe Bilotta <giuseppe.bilota@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Collect font, font metrics and icon size functions in a separate module.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Compute the default widths for the columns in the dive trip list from
their header and (expected) content length rather than some fixed pixel
sizes.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't hard-code column widths or icon sizes/positions. Instead, compute
them from the fonts used.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of hard-coding the icon sizes and spacing, compute them from the
font sizes, that Qt auto-computes from the displya DPI.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default IMG_SIZE and SPACING in the StarWidget are not appropriate
for HiDPI displays. Replace them with StarMetrics which are
auto-computed from the (default) font size (which Qt determines from the
display DPI settings).
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The type is now a double. It was a int during development, but due to
the feet/128 precision i changed it to a Double, but the default value
wasn't changed type on.
All the Qt tools swallowed the number there without complaining but the
Qt designer insisted on changing it to a double.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fist column is the O2% value, and was handled like that in the data.
It was only the column header that was wrong.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost all of our other classes have the ui class as a class member in
the controller code. This switches ConfigureDiveComputerDialog to that
model.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disable the Update Firmware button if you choose a device that we don't
support update firmware for.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't allow creation of backup files or writes to the computer before we
know we got some data, either from a backup file or from the actual
device.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default max value for a QSpinBox is 99. The default Saturation
factor for the OSTC3 is 110%. This code sets the max, min and default
values on those spinboxes.
The values comes from me reading the assembler code for the OSTC3.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default max value for a QSpinBox is 99. The default Saturation
factor for the OSTC3 is 110%. This code raises the max values to 255
which is as far as i've read the ostc3_interface.odt the max value.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is still missing lots of values which are now set to 0 with rather
unfortunate consequences (for example, setting Saturation and Desaturation
to 0 turns off the NDL / Deco calculations). So this code right now is
quite broken.
But at least this fixes the reported crash and gets some valid data
initialized.
Fixes#744
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code connects up the configuration ui with the backing
data structures thats gets read/written to/from the devices.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This builds up a ui to use for all the settings for the Suunto Vyper
family devices. Some of the fields are pure information, eg, max depth
and number of dives, so they are marked read-only.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decode the gasmix data into a sane format when creating the event, and
add the (currently unused) ability to specify a gas change to a
particular cylinder rather than (or in addition to) the gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not only does it make it look more like the libdivecomputer downloaders,
but the uemis downloader needs it in order to support all the flags we
have. Notably "download into private trip".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds an option to the export dialog to write an ascii file containing
filenames of image files a tab and the depth at the time of the image
taken.
[Dirk Hohndel: whitespace cleanup]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setpoints filled in into the ui where never set on the devicedetails
object so they where never propagated to backup or write settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When multiple graphs are displayed at the same time they end up being printed on top of each other.
Scale the lowest graph to accommodate the tankbar.
Add an intermediate scaling step to the depth axis when pp graphs or the tissue graph are visible.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This new version of the TagFilterSortModel actually accepts
*any* new MultiFilterInterface.
So, how to use it to create a new filter:
Implement a class that inherits from MultiFilterInterface
Implement the filterRow method
TagFilterSortModel::instance->add( myClass );
and you are done.
[Dirk Hohndel: removed some debug code and did whitespace cleanup]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A small typo broke the disabling of the graphs for the
newly added curves. ( btw, we need a designer to display
the graphs in a better way, just too much information. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a bit of the logic used. Now we show every
dive if nothing is chedked.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a graphical representation of tissue loadings at the current moment during the dive
to the tooltip box. The layout is inspired by the Sherwater Petrel.Add tissue saturation plot to tooltip
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some columns in the dive list makes more sense to have right aligned
than left aligned. This switches the numeric columns to right alignment
so they is more easily compared visually.
But, we keep the NR-column left-aligned because we use its left
indentation as dive-in-a-trip marker.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes two typos found by lintian.
I guess a bunch of translations will need to be updated or something, I am not
sure how they work so I didn't touch them. I presume in the worst case they
will need to be re-translated at the next iteration
--
Salvo Tomaselli
"Io non mi sento obbligato a credere che lo stesso Dio che ci ha dotato di
senso, ragione ed intelletto intendesse che noi ne facessimo a meno."
-- Galileo Galilei
http://ltworf.github.io/ltworf/
From a0e5f48349557fcccd82ba8c7555043de140835c Mon Sep 17 00:00:00 2001
From: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Signed-off-by: Salvo 'LtWorf' Tomaselli <tiposchi@tiscali.it>
Date: Fri, 12 Sep 2014 18:25:20 +0200
Subject: [PATCH] Fix typos reported by lintian
Fixes two typos reported by lintian.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch introduces a new structure holding partial pressures (doubles in bar) for
all three gases and a helper function to compute them from gasmix (which holds fractions)
and ambient pressure. Currentlty this works for OC and CCR, to be extended later to PSCR.
Currently the dive_comp_type argument is unused.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a maxcnsText widget under infoTab and populates it.
Note that I manually edited maintab.ui to display CNS and OTU
next to each other and right after gas data.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
New rules for them, a new item on the model with the text
"Empty Tags" should be marked if the user wants it to be
displayed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Trips will be filtered if it doesn't find any tags for
dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch correctly filter dives based on tags, but it will
also keep showing all the empty trips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method should remove a row on the dive list model
visualization if none of the tags that it have are marked
as 'visible'.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model accepts check / unchedk. Now, I need to also
plug the result of the check / uncheck to the list model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Place the TagWidget on the correct place on the main window.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was declared on a class definition, but never implemented.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the ui file and a empty class to start playing with it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Application's default lang is US english, translation to
UK spelling should be done in transifex.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sets text strings to follow the style of existing UI components in use of
capitalisation and use of :
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive computer configuration dialog was a bit cluttered. This
change adds a tabbed interface separating the basic settings from
the gas, dilutent and set point settings
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commits a24eb8ac12 and 0b0860d24a introduced a nasty hack that was
needed back then to make tank and weight selection work on the Mac. But it
caused other unpleasant issues (as mentioned in the commit messages).
I re-tested this with the current Qt5.3 based builds on Mac and this hack
is no longer needed.
Fixes#638
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are actually javascript files containing js objects and not json
files.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the mainwindow reads the settings and sets up things -
except that this has already happened in the constructor of the static
PreferencesDialog. So only keep those parts that aren't handled there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to get rid of the old default font on Windows (Calibri) we are
going to near ridiculous length. The reason for this is that we in the
past always saved the default font in the settings (how stupid was that!)
and so now even with a new default font in place, since there is an
explicit font in the settings we take that instead of the default.
Instead of requiring our existing users to use a registry cleaner to get
the correct default font on Windows 7 and later (the VAST majority of our
Windows users at this stage), we simply explicitly ignore that old default
font.
There is one very nasty side effect. A user cannot set Calibri as their
font of choice on Windows 7 or later (because we always force them back
onto Segoe). Given how much nicer Segoe looks I think this is an
acceptable flaw - let's hope this doesn't come back to bite me in the
future.
At the same time this changes the default font size handling. We try to
get the default font size of the OS so the app looks "right". This seems
to not give me the expected result on Linux with KDE, but maybe I'm doing
it wrong? Looks good when testing on Windows.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Similar change to the dive list. The idea is to not save things that are
the default. This way Subsurface will do the right thing when defaults
change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an elegant way around our problem with people who have the
horrible old "100px" column width in their settings. The first time they
run Subsurface after this fix things won't get better, but the offending
keys will be deleted at exit. And the second time they run, they'll get
the much more sensible new default widths.
Thanks to Thiago for this idea.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to start out with valid SAC rates in the diveplan.
Thanks to Gaetan for finding this and suggesting a different fix - this
seems cleaner to me.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The webservice backend sends responses in English. Let's do a better job
presenting those in the users preferred language.
Fixes#714
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The modelDataChanged method will remove all items and recreate everything
*right* now we will never use it, because we are not triggering any
changes on the model, but simply deleting and recreating it everytime
we open the dialog. to be changed in the future.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there's a rowsAboutToBeRemoevd, remove all items from
the scene() by calling scene()->clear(), instead of creating
a method just for that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we used removed things from the interface we could hit a dangling
pointer, so first delete the items, then let the system delete the rows.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connects the YearlyStatistics model with the YearlyStatisticsWidget
nothing is shown right now, mostly because I need to do everything
but now it's easyer to add the things that are missing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the old statistics panel at the botton of the new one to have
a reference view of the statistics while programming the new one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have a very sad way of controlling the statistics,
now we will create the model when there's a need for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The statistics widget is a beast, one of the parts that I dislike most
on the current subsurface implementation. This is the initial work to
change that to something amazing. This first commit adds the first bunch
of files that I think are needed, and the correct setup for the qmake and
cmake buildsystems.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we can't edit the trip date, we need to remember to
re-enable it after we disable it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using QToolBar I was able to remove much of the dead code
from the mainwindow.ui xml file by transforming the QToolButtons
into actions and loading them dynamically in the .cpp code.
I couldn't use the designer for this ( as I wanted ) because
Qt has no notion of ToolBars outside of the areas where the
MainWindow should have one, and we use it in a very different
area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Basically we could end up in a situation where the plotInfo is no longer
valid, yet the model changes and triggers a redraw before the new data is
passed into the TankBar.
Instead of chasing that race condition it seemed much easier to just copy
the plot_data entries and the gas information in the dive.
Fixes#716
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And move the units there.
This is a long going back and forth. What we want is narrow columns. But
what we need is something that's easy to understand for our users.
I'm open to other suggestions, but I think this moves us in the right
direction.
See #712
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was an interesting bug. When adding a dive that would end up in the
middle of the dive list, the newest dive in the dive list would end up
marked in the dive structure as selected - even though it wasn't
visualized as selected by Qt. Bad things happen if the user then made
changes to that dive without selecting something else first, for example
by either editing the dive or doing things to it like removing it from or
adding it to a trip. The same operation would also be applied to the
newest dive in the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to offer a simple way to remove a calculated deco, if Control is pressed
while clicking on the trash can in the dive plan, that point and all following are
removed. This way the user can Ctrl-click on the first calculated waypoint.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user right clicks the globe, we should only present the menu action
if there's a current dive, if not, we disable it.
Signed-off-by: Karina Mochetti <karina.mochetti@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code seemed way complicated, made way too many assumptions
and apparently was broken in certain cases.
This code seems very simple, looks correct and should fail gracefully
(i.e. simply do nothing) if things get confused.
Fixes#706
(I hope)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When backing up dive computer settings to XML, the confirmation
dialog shows the default file path. This patch fixes that by
displaying the correct file if the user changes the backup location.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This worked flawlessly on Mac and Linux, but on Windows I needed to add
the explicit setVisible here - not quite sure why.
Fixes#710
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we only plan OC dives, so let's not confuse things by showing the
set point for the tank.
Fixes#261
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the fix in commit f7119bdccf ("Planner: make sure no old
handles are around when entering Add/Plan") was incorrect. We ONLY want to
remove the existing handlers when we re-plan a dive, NOT when we call add
or plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. The modifications to the selection cause a redraw of the
profile. So we need to make sure that we leave the plan state and return
to profile state BEFORE we do this, otherwise we'll call into
createTemporaryPlan() with invalid data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
