If we want to keep the selected dive "close" to where it was before an
operation (whether a delete, or a reload, or something like that), then
the most intuitive thing to do appears to be to select either the same
dive again (if it still exists), or one very close to it in time. This
helper allows us to identify the dive in the current dive list that is
closest to the given time.
We do this in the C code to ensure that we look at all dives in the
dive_table - based on the id that is returned the UI can then figure out
where this dive is currently shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The variables that control each CVA iteration should be declared at the start
of each loop so that the values are carried over from one iteration to the
next.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In our verision of VPM-B for real dives, we take as the deco time the
difference between the time of the deepest ceiling and the time when the
ceiling clears.
When the display of ceilings was set to multiples of 3m this was confused, as
the maximum finder had issues: First of all, it updated the time when the ceiling
was the same (which was almost always the case for stepped ceilings) but changing
>= to > was not enough, since then the first time a deepest stepped ceiling was
reached was used.
This patch uses the actual ceiling (not rounded to the next integer multiple of 3m)
for this calculation to get rid of this problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We first check the sha to see if we want to load at all. But at that
point we already have the repository and the branch and we have synced
with the remote. So when we decide that we need to reload from storage,
we don't need to repeat those steps, instead we can go directly to the
git load.
For that to work we need to pass the repository pointer and the branch
name back to the caller so that we can directly call git_load_dives().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With Linus' changes to the tree creation saving the dives is no longer
the dominant part of that process, so simplify the output (which also
removes the hacky buggy code to show the percentages that is of course
totally bogus).
(apparently a couple of white space cleanups snuck into this patch)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
John Van Ostrand reports that when he dives using two cylinders using
sidemounts, the per-cylinder SAC rate display is very misleading.
What happens is that since the two cylinders are used together (but
without a manifold), John is alternating between the two but not
actually adding gas switches in the profile. As a result, the profile
looks like only one cylinder is used, even though clearly the other
cylinder gets breathed down too.
The per-cylinder SAC rate calculations would entirely ignore the
cylinder that didn't have gas switch events to it, and looking at the
info window it would look like John had a truly exceptional SAC rate.
But then in the general statistics panel that actually takes the whole
gas use into account, the very different real SAC rate would show up.
The basic issue is that if we don't have full use information for the
different cylinders, we would account the whole dive to just a partial
set. We did have a special case for this, but that special case only
really worked if the first cylinder truly was the only cylinder used.
This patch makes us see the difference between "only one cylinder was
used, and I can use the overall mean depth for it" and "more than one
cylinder was used, but I don't know what the mean depths might be".
Reported-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's good that this is unused, because it does the calculations wrong.
Due to the gas compressibility the gas use calculations should subtract
the gas_volume() values at the differing pressures, not the pressures
themselves.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that gas switch events always have indices into the cylinder table,
start using that to look up the gas mix from the cylinders rather than
from the gas switch event itself. In other words, the cylinder index is
now the primary data for gas switch events.
This means that now as you change the cylinder information, the gas
switch events will automatically update to reflect those changes.
Note that on loading data from the outside (either from a xml file, from
a git/cloud account, or from a dive computer), we may or may not
initially have an index for the gas change event. The external data may
be from an older version of subsurface, or it may be from a
libdivecomputer download that just doesn't give index data at all.
In that case, we will do:
- if there is no index, but there is explicit gas mix information, we
will look up the index based on that gas mix, picking the cylinder
that has the closest mix.
- if there isn't even explicit gas mix data, so we only have the event
value from libdivecomputer, we will turn that value into a gasmix,
and use that to look up the cylinder index as above.
- if no valid cylinder information is available at all, gas switch
events will just be dropped.
When saving the data, we now always save the cylinder index, and the gas
mix associated with that cylinder (that gas mix will be ignored on load,
since the index is the primary, but it makes the event much easier to
read).
It is worth noting we do not modify the libdivecomputer value, even if
the gasmix has changed, so that remains as a record of the original
download.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit df4e26c875 ("Start sanitizing gaschange event information")
back about a year and a half ago, I started sanitizing the gas switch
event data, allowing gas switches to be associated with a particular
cylinder index rather than just the gas mix that is switched to.
But that initial step only _allowed_ a gas switch event to be associated
with a particular cylinder, the primary model was still to just specify
the mix.
This finally takes the next step, and *always* associates a gas switch
event with a particular cylinder. Instead of then looking up the
cylinder by trying to match gas mixes at runtime, subsurface now looks
it up when loading the dive initially as part of the dive fixup code.
The switch event still has an a separate gas mix associated with it, but
this patch also starts preparing for entirely relying on the gas mix in
the cylinder itself, by starting to pass in not just the event but also
the dive pointer to the routines that look up gas mix details.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some of the gas mix cleanups I'm doing are in code that uses const
pointers, and wants to use this.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gas switch event handling is somewhat fragile, mostly because the
legacy event encoding for gas switches is odd. It's also limited to
whole percentages, unlike our internal gas mix model.
In addition, it also ends up comparing the values to the raw permille
values, which is wrong for air, and wouldn't match our O2_IN_AIR which
is 209 permille (closest approximation to 20.946%).
So handle air separately, since "21" really is a valid oxygen value for
air, and should match 20.9%. And use the proper accessor functions to
get the gasmix values.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk says that divinglog hasn't been doing the linear pressure
interpolation for a long while, so we're doing extra dive fixups that
really aren't needed any more.
Also, the code is actually buggy: it only ever worked on the first
cylinder anyway (because only the first cylinder pressure_delta[] would
be initialized). That was probably perfectly fine in practice, since
it's unlikely that many tech divers used old versions of divinglog
anyway, so the bug per se isn't a reason to remove it - but it is a sign
that the code was a bit hard to read, so let's get rid of it if there is
no reason to maintain it or fix it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
