Create a new class, which performs all thumbnailing code.
This is mostly code reshuffling. Thumbnails are extracted
either from a cache or thumbnail calculation is started in
a worker thread.
Since getHashedImage() is called from a worker thread it
makes no sense to call subfunctions in yet another worker
thread. Remove these calls.
In contrast to the previous code, on error the background
thread produces a failure image, but it is not yet shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In imagedownloader.cpp the only thing we need from the picture struct
is the filename. Therefore, use QStrings instead of the picture struct.
This simplifies memory management.
Remove the clone_picture() function, which is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
SHashedImage was a subclass of QImage, which fetched the image according
to the filename hashes. Turn this into a function, as this is much more
idiomatic and flexible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code loaded all thumbnails into memory at once. This does
not scale to logs with thousands of pictures. Therefore, save
the pictures to individual files and only load the currently
needed pictures.
Currently, this will make changing switching between dives slower,
because the thumbnails are loaded from disk. In the future, it
is planned to do this in a background thread without blocking
the user interface.
A notable difference to the old code: Thumbnails are now indexed
by the image-hash (i.e. the content of the raw image) and not
by the filename of the image. Thus, different paths to the same
image should only be saved once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To potentially conserve memory, don't keep copies of scaled thumbnails.
Scale the thumbnails on demand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
So far we only wrote messages to subsurface.log on Android (since we couldn't
figure out how to make that file user accessible on iOS). Now that that's
fixed, we also need to actually write to the file in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous taglist_get_tagstring signature/implementation did not allow
handling of cases where inputted buffer could not contain all tags.
New implementation allocates buffer based on pre-computed size allowing to
insert all tags in the returned string.
Added get_taglist_string in qthelper to handle conversion to QString
Added TestTagList with tests for taglist_get_tagstring
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Add DiveItem::displayTags helper method to return Tags as a QString
New Tags column is
by default inserted before "Photos" column
by default disabled
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
To ease trouble-shooting of the picture thumbnailer add a number
of debug- and info-messages.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the numeric format of many values printed to the UI to
reflect the correct numeric format of the selected locale:
- dot or comma as decimal separator
- comma or dot as thousands separator
In the Qt domain the `L` flag is used case specific mostly
in qthelper.cpp.
Then the helper functions get_xxx_string() are used more consistently.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Change the strategy when to allow cylinder removal from a dive:
- Not remove when cylinder has gas switch events, in any other cases
allow removal
- Remove this whole "cylinder with same gas" thing being a criteria
for cylinder removal
When removing a cylinder which has corresponding pressure info in
samples, also remove this pressure info from the samples.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Use struct temperature_t for temperatures in struct stats_t and
use get_temperature_string() when printing these temperatures for
statistics and HTML export.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Mostly replace "return (expression);" by "return expression;" and one
case of "function((parameter))" by "function(parameter)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a dive manually, you might clear the "duration" field and fill
in your value by hand. Unfortunately, commit #1052 produced a bug that
practically limited the dive duration to 6 minutes once the field was cleared.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This patch allows the planner to save the last manually-entered
dive planner point of a dive plan. When the plan has been saved
and re-opened for edit, the time of the last-entered dive planner
point is used to ensure that dive planning continues from the same
point in the profile as was when the original dive plan was saved.
Mechanism:
1) In dive.h, create a new dc attribute dc->last_manual_time
with data type of duration_t.
2) In diveplanner.c, ensure that the last manually-entered
dive planner point is saved in dc->last_manual_time.
3) In save-xml.c, create a new XML attribute for the <divecomputer>
element, named last-manual-time. For dive plans, the element would
now look like:
<divecomputer model='planned dive' last-manual-time='31:17 min'>
4) In parse-xml.c, insert code that recognises the last-manual-time
XML attribute, reads the time value and assigns this time to
dc->last_manual_time.
5) In diveplannermodel.cpp, method DiveplannerPointModel::loadfromdive,
insert code that sets the appropriate boolean value to dp->entered
by comparing newtime (i.e. time of dp) with dc->last_manual_time.
6) Diveplannermodel.cpp also accepts profile data from normal dives in
the dive log, whether hand-entered or loaded from dive computer. It
looks like the reduction of dive points for dives with >100 points
continues to work ok.
The result is that when a dive plan is saved with manually entered
points up to e.g. 10 minutes into the dive, it can be re-opened for edit
in the dive planner and the planner re-creates the plan with manually
entered points up to 10 minutes. The rest of the points are "soft"
points, shaped by the deco calculations of the planner.
Improvements: Improve code for profile display in dive planner
This responds to #1052.
Change load-git.c and save-git.c so that the last-manual-time is
also saved in the git-format dive log.
Several stylistic changes in text for consistent C source code.
Improvement of dive planner profile display:
Do some simplification of my alterations to diveplannermodel.cpp
Two small style changes in planner.c and diveplannermodel.cpp
as requested ny @neolit123
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
There are ca. 50 constructs of the kind
same_string(s, "")
to test for empty or null strings. Replace them by the new helper
function empty_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move divepicturemodel.cpp to the desktop only category and deal
with the (limited) fallout. We, currently, do not support dive
pictures tied to the profile on mobile, so there is no use
including this code.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Do not pull in the DivePlannerPointsModel::instance as this is not
used in the called function. We (currently) do not support deco
computations on mobile, so trying to pull in any deco state from
the planner is futile anyway.
With this uncoupling, 6 more model files are not needed in mobile
any more.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is a somewhat hacky commit. For a very long time, the delete
from the divelist on mobile crashed. That is, not always for anyone,
but for me almost consistently. This commit tries to solve it.
I found that trying to save the delete immediately after removing
data from the underlying model seemed to cause the crash. Hacking
around, I found that a simple beginResetModel/endResetModel between
the delete of the underlying model data and actual save is
sufficient to solve the crash.
The big question is, why does this all work? I suspect some of race
condition between deleting model data, and giving the QML engine
the opportunity to do its thing.
This is also related to issue #311, but that is not implemented
here.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For a long time, I did not realize that a lot of qt-models are only
used in the mobile app, or only used in the desktop application.
This commit splits the qt-models in 3 parts. Used in both mobile and
desktop, used in desktop only, used in mobile only.
There is no other code change in here, other than cmake changes.
To me, this gives at least developers more insight where code is
actually used, and there is a small benefit in footpoint.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Instead of writing TODO comment blocks, just do the work, and move the
function to the proper class. Further, after review from Berthold, cleanup
the function. There is no reason that getGasList() is member of
any class. It is just a non-class helper, and as it is only used
here, a static helper.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
When deleting a dive from the divelist model, also free the
pointed to DiveObjectHelper data. There seems no harm done
(other than a memory leak) by this missing free.
Found while (again) investigating the infamous crash occuring
when deleting a dive from the mobile app when deleting a dive
from the dive list.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also commit c032006d91. Compare functions passed
to sort functions need to compare for less-than and not
less-or-equal.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
CID 208296. IndexOf can return -1 when not found, which will
not happen in this context, so just to silence Coverity.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With commit 5962f00679, a well known problem was introduced.
Incorrect width setting for the spanning trip lines. And as there
is even a specific functon for that, just call this.
The reason the mentioned commit introduces this, is that
invalidate() causes layoutChanged signals, and invalidateFilter()
does not.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is mainly code maintenance. Instead of emitting explicit
dataChanged signals, we can make sure that setStringList()
is called after all model data manipulation is ready. Accoording
to the Qt docs: "The model will notify any attached views
that its underlying data has changed".
In itself, this does not solve the tripped assert mentioned in
commit 5962f00679, but this calling at the end just feels
better.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This "bug" is found using Qt 5.10 compiled in developer mode. Access
the filers, click a little around here, close the filters. Almost every
time the following assert is triggered:
ASSERT failure in QPersistentModelIndex::~QPersistentModelIndex:
"persistent model indexes corrupted", file itemmodels/qabstractitemmodel.cpp, line 643
This is relatively deep down in Qt, and it is triggered by clearing the
filters. Trying to force a crash when using the same scenario in Qt 5.10
compiled for production (so no active asserts) did not result in a crash.
So, upto this time, it is unclear if the Qt assert points out a real problem,
or it is some false alarm (for whatever reason).
Further investigation shows that the assert can be solved by changing the
invalidate() to an invalidateFilter(). Indeed, the last variant is a little
more lightweigt, and does seem to do the same job from a functional point
of view (in this case).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
FilterModelBase is a direct subclass of QAbstractItemModel. Therefore,
dynamic_cast<>ing the former to the latter is unnecessary. Probably
an artifact of previous code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce toggle buttons which mean "filter all dives except
those fulfilling the selected criteria".
The old code used to check for rowCount() == 0. This should never happen,
because there is always a row "empty field". This check was moved into
the preamble of the functions to seperate it from the actual logic.
Fixes#435
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a curious pattern of singletons being implemented based on
QScopedPointer<>s. This is an unnecessary level of indirection:
The lifetime of the smart pointer is the same as that of the
pointed-to object. Therefore, replace these pointers by the respective
objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We aren't really consistent. And I don't do this often enough. But based
on a few things that I saw in a recent commit, I wanted to at least fix
those. And then of course fixed everything in those two files.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Found while compiled against Qt 5.10 build from source. The assert
Q_ASSERT(last >= first) is trapped by this beginInsertRows in
case there are no pictures. Just do not call this when there are
no pictures.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
To every filter list add a menu button that allows selection of all,
selection of none or inversion of selection.
Implements #435.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The *FilterModels had a number of of virtual functions, which only
accessed members of the base class. Moreover, these functions were
identical and generated with macros. Therefore, move these functions
to the base class.
The one excption is data(), which uses different count functions
(passed as a macro parameter). Thus, introduce a virtual countDives()
function and likewise move data() to the base class. A function pointer
might be even more clear, but since the rest of the code/Qt relies
heavily on runtime polymorphism, let's do the same here.
The only macros left are those creating the singleton accessors.
This could be more clearly realized by templates, but let's
likewise keep it the way is.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two classes, MultiFilterInterface and FiterModelBase.
The latter derives from the former and from QStringListModel.
The former was not used anywhere else. Moreover, in contradiction
to its name, MultiFilterInterface is not an interface (in the Java
sense), because it actually has (non-virtual) data members. All in
all, the data model is very weird.
Merge these two classes, since there seems to be no gain whatsoever
from keeping MultiFilterInterface separate.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The more complex handling is no longer needed because:
- Keyboard tracking for gfhigh/low UI fields was switched off here:
030c094854
- GFhigh was limited to 40 here:
53fffe0ce3
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Commit 6343515fed introduced equality
instead of substring comparison for filters. This broke the buddy
filter in the case of more than one buddy, because in such a case
the buddy list is a comma-separated string.
Fix this by splitting the buddy string, trimming the individual
strings and search in the list.
Fixes#969
Reported-by: <yrevawerd@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This implements different zoom levels for the dive photos tab as
suggested by Stefan Fuchs <sfuchs@gmx.de> in #898.
The zoom level can be changed using a slider or CTRL+mousewheel.
Zoom levels range from a third of the standard thumbnail size to
thrice the standard thumbnail size.
Thumbnails are cached in maximum resolution and scaled down on
the fly. Because the profile widget took its pictures from the
photo list model, an extra picture copy with a fixed size had
to be introduced.
The UI is still a bit crude.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The constructor and the list of pictures was protected, but the
class neither had friends nor subclasses (a subclass was removed
in a recent commit).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Correct way of using indices for rowDDstart and rowDDend.
Reset rowDDstart and rowDDend at beginning of updating dive pictures.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
See issue #875. In hindsight the reason for this bug is easy to
understand. When updating a dive, the dive was first removed
from the model, and added in its new state again. This does seems
resonable, but the delete in the model causes the internal (QML)
state to be changed, and the previous state (like the currentIndex
that was pointing to the just deleted row, so that one is changed to
something valid internally) is not restored at recreation of
the edited dive. The QML engine has no way to understand that
the remove and subsequent add are in fact one atomic operation.
This can be solved by simply updating the underlying data in
place, and notifying the change using a dataChanged emitted
signal. The dataChanged signal takes care of the repaint of
the screen, and there is no need for removeRow/insertRow pairs.
Fixes: #875
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In the dive picture tab show pictures of all selected dive.
But at the same moment take care that in the profile only
pictures from displayed_dive are displayed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The removed comment in qt-models/divepicturemodel.h described
todo items which were already implemented.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The thumbnailing in qt-models/divepicturemodel.cpp was performed
concurrently, but the thumbnailCache was not protected from races.
Resolve this by guarding the thumbnalCache accesses with mutexes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code of DivePictureModel used a QHash to keep track of thumbnails.
Not only was the code rather complex - it also had the consequence that
pictures are sorted according to the hash function, i.e. seemingly
random.
This commit replaces the QHash by a simple QList which keeps track
of thumbnails and some meta-data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Note that constructs like QList<QFuture<void>> is incompatible with
pre-C++11 compilers. But the code base is so full of C++11isms that
we may just as well remove asymmetric eye-sores of the kind
"QList<QFuture<void> >".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simplify the sum up of the deco stop times for analysis of
the planner variations.
Plus rename define for deco stop variations debug output
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Planning dives is heavy on CPU, so better be sure we only
do it when needed. In particular, when moving around dive
points, we only want a new plan once per move and not three
times (triggered at various points in the chain of events).
This should significantly improve planner snappiness.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Calculating variations when in recreational mode doesn't make sense, and can
prevent variations from being calculated when switching back to Buhlmann or
VPM-B modes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
We needed to prevent updates when we messed with the
diveplannerpointsmodel as those would trigger
starting planning from scratch causing infinite loops.
Now, the variations calculation operates on a copy of
the diveplan, so the model is no longer involved and
we should not block recalculations (as those might be
triggered by the UI).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This reenables the computation of plan variations but now in a separate
thread. Once finieshed, a signal is sent to update the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
If the user implicitly adds a dive site by editing a dive, and
a location filter is active, check the new dive site in the
location filter.
This is done by informing the LocationFilterModel of the new
dive site name prior to repopulation. The LocationFilterModel
then adds a corresponding entry and marks it as checked.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since commit 01d961086c, the location filter
list is updated if a dive site is edited. The problem is that if the
name of a selected dive site is changed, the selection is lost.
Therefore, before repopulating, inform the location filter that a dive
site changed its name. The location filter then internally changes the
name and can properly transfer the old selection on repopulate. This is
performed via the new LocationInformationWidget::nameChanged signal,
which is connected to the new LocationFilterModel::changeName slot.
A special case to be handled is the following:
[ ] Site 1
[x] Site 2
and "Site 2" being renamed to "Site 1", i.e. both sites being merged.
Here, the merging is detected and "Site 1" will likewise be checked:
[x] Site 1
[x] Site 1
No merging is performed, as the list will be repopulated anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function dive_site_less_than() in qt-models/divelocationmodel.cpp
does not what it promises: it uses less-or-equal instead of less-than
comparison.
Note that, even though this may sound pedantic, this is an actual bug.
Usually, sorting functions suppose that they are provided with
strict weak ordering, which <= does *not* provide.
This is the actual reason for the crash mentioned in commit
f8a3a85210.
While touching this function, make it of static linkage, since
its usage is local to this translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit is a continuation of commit 739b27427c,
in which a substring comparison was replaced by equality comparison to
avoid confusing UI behavior of the filter interface.
The suit and buddy filters were plagued by the same problem, so change
their code in analogy.
Fixes#551 (in conjunction with commit dd2466f518).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pass the planner state struct to the profile computation so it can use
deco_time and first ceiling to display VPM-B ceiling.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For UI responsiveness, we need to be able to run the planner in the background. This needs the
planner state to be localized (and we need to pass a pointer around).
In order to not let too many lines overrun (and to save typing in the future)
I have renamed instances of struct deco_state to ds. Yes this should have gone
to a separate commit but I accidentally commit --amend'ed it.
Computing of planner variations is temporarily disabled.
Unlock the planner when returning early
So we don't deadlock in add dive and recreational mode (which
use the planner without actually planning).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Update the filters if the list of dives is updated by calling
MultiFilterSortModel::instance()->myInvalidate();
This had the side effect of clearing all selections. Thus, in
the repopulate() methods of the FilterModels, check those
entries that were checked previously. Since all the filter
models use the same code, introduce a base class FilterModelBase.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This replaces a dynamically allocated array of bool by std::vector<char>.
1) This makes the code shorter and less error prone, because memory
management has not to be done by hand.
2) It fixes a bug in the old code:
memset(checkState, false, list.count()) is wrong, because bool is
not guaranteed to be the same size as char!
Two notes:
1) QMap<>, QVector<>, etc. are used numerous times in the code, so
this doesn't introduce a new C++ concept. Here, the std:: version
is used, because there is no need for reference counting, COW
semantics, etc.
2) std::vector<char> is used instead of std::vector<bool>, because
the latter does a pessimization where a bitfield is used!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The location filter used a substring comparison, which had
the side effect that dives with the location "Test 1" were
shown when filtering for "Test 12".
Moreover, avoid a deep copy of the location list. This is
done by looping over one item less than rowCount() instead
of removing the last item. While doing this, remove an
unnecessary if-statement.
This commit partially fixes#675.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix an indentation issue in qt-models/diveplannermodel.cpp.
An if was indented as if it were part of an outer if.
Correct indentation confirmed by Stefan Fuchs <sfuchs@gmx.de>.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This patch allows updating the location of map markers
while editing a dive site and updating the text in the
LocationInformationWidget in real-time.
Currently it is only possible to see the marker changes by
clicking 'Apply'.
The modification required the following changes:
- add the MapWidget::updateCurrentDiveSiteCoordinatesToMap() slot
and call it each time the GPS text updates
- separate the updateCurrentDiveSiteCoordinates(FromMap/ToMap) logic
by having the FromMap/ToMap suffix to method names
- make MapWidgetHelper::updateCurrentDiveSiteCoordinatesToMap()
call a new MapLocationModel::updateMapLocationCoordinates()
method, which updates selected location coordinates and the model
- add MapLocation::setCoordinateNoEmit() that does not emit
a signal when updating a coordinate
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
After we download new dives we need to try to autogroup them.
In Subsurface this is done when we refresh the dive list. Here
we might be better off doing it right after processing the new
dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When deleting a cylinder the mapping was not filled with all
necessary values. Values for cylinders before deleted cylinder were
missing.
Plus do the endRemoveRows at the right time.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This is a amendment to 24bd5a8dce
Move the cylinder also to first position if first planner datapoint
cylinder change because a row is added or deleted to the dive datapoints.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
When changing the date/time of a dive in the planner the dive may end
up in a totaly new position in respect to date/time of other dives in
dive list table. It can be moved to the past or the future before or after
other existing dives. It also could overlap with an existing dive.
This change enables identification of a new "virtual" dive list position
and based on this starts looking for previous dives.
Then it (as before the change) does init the deco calculation with any
applicable previous dive and surface interval.
If some of these applicable dives overlap it returns a neg. surface time
which is then used in the planner notes to prohibit display of results.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
To compute the heatmap value, we need the current gasmix but
the current cylinderindex is no longer available.
Fixes#562
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the planner it is best practise to start the dive with the first
gas in the gaslist. Otherwise one would get a gaschange event at the
very beginning of a dive.
This change implements the following feature:
Automatically move a gas to position 0 in the gaslist if the user selects
this gas for the first dive data point.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the planner if one adds two or more cylinders with the same gasmix
(e.g. back gas and bottom stage 18/45) the drop down and data in the
used gas column of the planner points table will be filled with a more
verbose string mentioning also the cyl number and the cyl type
description.
Makes it easier in such a case to select the right cylinder.
Introduces also a helper function which tells you if there is another
cylinder with the same gasmix as the provided cylinder.
This also has an option if it should consider unused cylinders or not.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Be even more restrictive regarding which cylinders can be removed from
the cylinder table in the planner.
Only if a cyliner is not used in the planned part of the dive
it can be removed.
It doesn't matter if there is another cylinder with same gasmix.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Wire up the UI elements (QSpinBoxes) for ascend rates (4x) and descend rate
(1x) correctly so that the profile and calculation is updated immediately
after the value is changed (e.g. increased/decresed by 1) by clicking
the QSpinBox arrows.
Until now one had to click into the profile or change another planner
preference first before the change became effective.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The `static int defaultWidth[]` definition in divelistview.cpp
could potentially end up missing an element which can later result
in out-of-bounds access when iterating through the list of
columns and updating their widths.
Add a couple of methods in DiveTripModel for setting and getting
the widths and use those. The default values are now pre-set in a
QVector in the DiveTripModel() constructor.
Throw warnings if out-of-bounds columns are requested.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Calculating dive.when + dive.duration doesn't always give the correct
endtime of a dive especially when a dive has surface interval(s) in
the middle.
Using the helper function dive_endtime() fixes this issue.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This option should have never been there. This is not how
gradient factors are supposed to work. It would only trick
users to use the wrong value..
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Print out partial derivatives of stop times with respect to
variation of depth and duratin of last manual segment.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
...rather than use a global variable and a macro.
This should be a no-op in preparation to allow planning
several versions of a dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is really unrelated to my recent "multiple gas pressures" work, but
the test case from Gaetan Bisson showed that the logic for which
cylinders to show in the equipment tab was less than optimal.
We basically used to show only cylinders that were actively used, unless
you had the "display_unused_tanks" preference option set. That comes
from some dive computers reporting a *lot* of cylinders that the diver
really doesn't even have with him on the dive. And showing those extra
dummy cylinders gets pretty annoying after a time, which is why we
default to not showing unused tanks.
However, in Gaetan's case, he had a total of four cylinders on the dive:
the O2 and diluent bottle for the rebreather dive, and then bailout
bottles (both air and deco). And while the bailout bottles weren't
actually used, Gaetan had actually filled in all the pressure details
etc for them, and so you'd really expect them to show up. These were
*not* just some extraneous default cylinder filled in by an over-eager
dive computer.
But because the bailout wasn't used, the manual pressures at the end
were the same as at the beginning, and the "unused cylinder" logic
triggered anyway.
So tweak the logic a bit, and say that you show cylinder equipment not
only if it has been used on the dive, but also if it has any pressure
information for it.
So the o nly cylinders we don't show are the ones that really have no
interesting information at all, except for possibly the cylinder tank
type itself (which is exactly what the over-eager dive computer case
might fill in, usually in the form of a default cylinder type).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I thought we had this automated, but Lubomirs commits introduced a few
files with dos line endings. This is purely a change of line endings, no
other changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
getRole() returns a QVariant and the cast is a small overhead.
Using these helpers will reduce the overhead.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The MapLocation QObject now has a QString property "name", which is
translating the dive_site->name member.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The idea of this flag is to be able to only to emit the
selectedLocationChanged() signal when the user clicked on the map
(fromClick == true).
MapWidgetHelper::selectedLocationChanged() listens for this signal
and only then it will select nearby dives based on a "small-cicle".
If "fromClick" is false, it's the backend or the dive list that
updated the selection and MapWidgetHelper::selectedLocationChanged()
should no be called.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
getMapLocationForUuid() accepts a UUID, searches the MapLocation table
and returns a pointer.
Make use of the new method in setSelectedUuid().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Inside the QML Map class there is a MapItemView item.
This item uses a delegate that receive a "model" property from
the MapLocationModel, but infact that's a QObject with the MapLocation
defined properties. That's how MapItemView works.
The problem here is that "model" QObject cannot be cast back
to a MapLocation as the meta data in there does not include
a MapLocation sub-class, for some reason.
Even if using propery() on that QObject to fetch data like coordinates
works, instead of storing this strange object pointer, store the
MapLocation UUID (from dive_site) which is a uint32_t.
setSelectedUuid() deals with this oddity and finds the correct
MapLocation pointer in the table and dispatches a selectedLocationChanged()
signal for it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The "uuid" property will be the one from the dive_site. At first it
will also be used to track the active marker/flag selection.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This method should be used if many markers are added at once.
It's main purpose is to reduces the number of beingInsertRows()
calls.
Make MapWidgetHelper::reloadMapLocations() use it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Instead of maintaining a seperate latitude/longitude values
in C++ and passing them to QML separatelly, pass them as a QGeoCoordinate.
This reduces the number of model "roles" and also prevents the creations
of extra objects in QML (e.g. via QtPositioning.coordinate(..)).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- add() will be used to add a MapLocation to the model with
beginInsertRows()...endInsertRows()
- clear() will be used to clear the model with beginRemoveRows()...
endRemoveRows()
NOTE: emiting dataChanged() does not seem to update the QML view for
this model so calling being<..>Rows() seems to be the "correct Qt
approach" to do this.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The QML Map widget requires a QAbstractListModel based model to operate
with good performance. Technically gpslistmodel.cpp can be used for that
same purpose (e.g. has GPS coordinates), but the way it updates
may complicate the Map widget integration.
Thus, a new model is created - MapLocationModel, with items of type
MapLocation, for an attempt for a clean project structure on the C++ side.
For now it only handles latitude and longitude.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This finally handles multiple cylinder pressures, both overlapping and
consecutive, and it seems to work on the nasty cases I've thrown at it.
Want to just track five different cylinders all at once, without any
pesky gas switch events? Sure, you can do that. It will show five
different gas pressures for your five cylinders, and they will go down
as you breathe down the cylinders.
I obviously don't have any real data for that case, but I do have a test
file with five actual cylinders that all have samples over the whole
course of the dive. The end result looks messy as hell, but what did
you expect?
HOWEVER.
The only way to do this sanely was
- actually make the "struct plot_info" have all the cylinder pressures
(so no "sensor index and pressure" - every cylinder has a pressure for
every plot info entry)
This obviously makes the plot_info much bigger. We used to have
MAX_CYLINDERS be a fairly generous 8, which seems sane. The planning
code made that 8 be 20. That seems questionable. But whatever.
The good news is that the plot-info should hopefully get freed, and
only be allocated one dive at a time, so the fact that it is big and
nasty shouldn't be a scaling issue, though.
- the "populate_pressure_information()" function had to be rewritten
quite a bit. The good news is that it's actually simpler now, although
I would not go so far as to really call it simple. It's still
complicated and suble, but now it explicitly just does one cylinder at
a time.
It *used* to have this insanely complicated "keep track of the pressure
ranges for every cylinder at once". I just couldn't stand that model
and keep my sanity, so it now just tracks one cylinder at a time, and
doesn't have an array of live data, instead the caller will just call
it for each cylinder.
- get rid of some of our hackier stuff, like the code that populates the
plot_info data code with the currently selected cylinder number, and
clears out any other pressures. That obviously does *not* work when you
may not have a single primary cylinder any more.
Now, the above sounds like all good things. Yeah, it mostly is.
BUT.
There's a few big downsides from the above:
- there's no sane way to do this as a series of small changes.
The change to make the plot_info take an array of cylinder pressures
rather than the sensor+pressure model really isn't amenable to "fix up
one use at a time". When you switch over to the new data structure
model, you have to switch over to the new way of populating the
pressure ranges. The two just go hand in hand.
- Some of our code *depended* on the "sensor+pressure" model. I fixed all
the ones I could sanely fix. There was one particular case that I just
couldn't sanely fix, and I didn't care enough about it to do something
insane.
So the only _known_ breakage is the "TankItem" profile widget. That's
the bar at the bottom of the profile that shows which cylinder is in
use right now. You'd think that would be trivial to fix up, and yes it
would be - I could just use the regular model of
firstcyl = explicit_first_cylinder(dive, dc)
.. then iterate over the gas change events to see the others ..
but the problem with the "TankItem" widget is that it does its own
model, and it has thrown away the dive and the dive computer
information. It just doesn't even know. It only knows what cylinders
there are, and the plot_info. And it just used to look at the sensor
number in the plot_info, and be done with that. That number no longer
exists.
- I have tested it, and I think the code is better, but hey, it's a
fairly large patch to some of the more complex code in our code base.
That "interpolate missing pressure fields" code really isn't pretty. It
may be prettier, but..
Anyway, without further ado, here's the patch. No sign-off yet, because I
do think people should look and comment. But I think the patch is fine,
and I'll fix anythign that anybody can find, *except* for that TankItem
thing that I will refuse to touch. That class is ugly. It needs to have
access to the actual dive.
Note how it actually does remove more lines than it adds, and that's
despite added comments etc. The code really is simpler, but there may be
cases in there that need more work.
Known missing pieces that don't currently take advantage of concurrent
cylinder pressure data:
- the momentary SAC rate coloring for dives will need more work
- dive merging (but we expect to generally normally not merge dive
computers, which is the main source of sensor data)
- actually taking advantage of different sensor data from different
dive computers
But most of all: Testing. Lots and lots of testing to find all the
corner cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently carry two pressures around for all the samples and plot
info, but the second pressure is reserved for CCR dives as the O2
cylinder pressure.
That's kind of annoying when we *could* use it for regular sidemount
dives as the secondary pressure.
So start prepping for that instead: don't make it "pressure" and
"o2pressure", make it just be an array of two pressure values.
NOTE! This is purely mindless prepwork. It literally just does a
search-and-replace, keeping the exact same semantics, so "pressure[1]"
is still just O2 pressure.
But at some future date, we can now start using it for a second sensor
value for sidemount instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The trick is to pick a path that is accessible from other applications.
In theory QStandardPaths::GenericDataLocation should provide that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks "Accept" when no dives were downloaded we would otherwise
dereference unitialized memory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know why we are setting lastIndex to -1. That seems odd.
But for now this workaround will have to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you start a new session with Download from DC, clear out the table
from the last attempt before adding the page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MAX_TANK_INFO is a new macro in dive.h to define the
maximum number of tank_info_t objects.
TankInfoModel's data() and setData() now check for valid
row indexes before accessing the tank_info[] array directly.
Without this patch TankInfoMode::data() can cause a SIGSEGV.
Reported-by: Pedro Neves <nevesdiver@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The used time format was h:mh: i.e. 1:16h:
This patch gets rid of the colon after the hour indicator.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
all qDebug / qCDebug and friends now will be properly
logged into developer -> log, on QML.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML and C++ model don't interact too much, a new Rule
should be created and used on the QML
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way they get correctly prepared and derived data fields
get populated. For example, the dive number gets updated if
these are indeed the newest dives.
Fixes#408
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I noticed this in the mobile download code when fixing an unrelated
issue - and then realized that the same was true in the desktop app
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When (with mobile on desktop) loading from DC is called and the dive computer
to connect to is not in download mode, the repopulate() function is called
with an empty dive table. This trips the assert (obviously, debug compile only) in
DiveImportedModel::setImportedDivesIndexes(). This simple fix makes things just
more robust.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This already takes into account which of those dives were selected.
Right now all we have is select all or none - this needs actual support
in the UI, but once that's there, it will just work (famous last words).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still to do:
- select the dives to save
- record the downloaded dives
but download is already working. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is important to not duplicate code for the Qml
view. Now the DownloadFromDiveComputer widget is mostly
free from important code (that has been upgraded to the
core folder), and I can start coding the QML interface.
There are still a few functions on the desktop widget
that will die so I can call them via the QML code later.
I also touched the location of a few globals (please, let's
stop using those) - because it was declared on the
desktop code and being used in the core.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the function to create the dive duration string in a way that
it can be used also in info and stats tab and added some more flexibility.
Changed layout for <1h freedives to "0:05:35" (w/o units) or "5:35min"
(with units and :) or "5min 35sec" (with units with space).
Add a new function to create the surface interval string.
Completely remove old function get_time_string() and get_time_string_s().
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
We now respect the settings in the preferences and also only show
the duration as minutes and seconds if the dive is a free dive.
Fixes#361Fixes#362
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
See https://github.com/Subsurface-divelog/subsurface/issues/345. The
menues where not translated. The basis of this error is a simple
typo in core/taxonomy.c where the classname was mis-spelled in the
QT_TRANSLATE_NOOP. In addition, to pull and translate the strings
from C code, the normal tr() does not work, and the functionality
from the gettextfromc class is used.
Fixes: #345
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With current code when re-planning a dive the planner output in the
dive notes is always moved down by one line.
This fix avoids that this additional line break is added.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This is another attept at the problem if identifying a potentially
user supplied text in the dive notes upon replannig a dive.
It gets rid of the user visable position markers (*!* and ***) and
cirumvents problems with mark-up by first converting the old notes
to plan text (assuming that user only enters plain text in the notes
field as we do in other places as well). Then the automatically added
part is identified by locating the disclaimer in the text (if the user
edited/delted the disclaimer or changed langue in between it is her
problem to manually delete the old plan).
Everything from the disclaimer on is deleted and replaced by the new plan.
If the disclaimer is not found, the new plan is appended to the old notes.
This way we make sure no information gets automatically deleted.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When replanning a dive, the setpoint information from the profile waypoints
were reset to 0, resulting in a dive that has a dive mode of CCR, but only with
OC legs in the profile. This is just wrong, and is corrected here. Notice
that there is no averaging involved (in the reduction of a replanned real
dive that has more than 100 waypoints) as is done for depth. This is just
fine for setpoint data.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
New strategy to identify old planner output in notes when
replanning a dive: Text anchors ("*!*" and "***") added for planner output
For backwards compatibility: If there is no anchor but an old table
delete everything.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Don't add the last stop with addstop for correcting the lenght
of the dive if planner generated points can be removed when replanning.
Otherwise this will not be deleted when replanning a dive.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Upon replanning a dive, we want to delete the old
dive plan in the notes and replace it with the actual.
This fixes a problem when we failed to detect the old plan due
to the deco model name appearing in the disclaimer that was used
as a marker for the notes.
This patch also adds translation markers for the deco model name strings..
Fixes#285
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Second attempt to do the thing with the red background color for cylinder
start and end pressure correctly. This now should cover all scenarios.
This rewrites and partitially reverts commit b8e044d
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Display the correct trash or trashforbidden icon and tooltip in the cylinder table.
This should fit together with if it is really possible to remove a cylinder.
Search for "same gas" based on used cylinders only. Otherwise one could remove
a used cylinder because there is an unused cylinder with same gas.
ToDo:
In planner update trash icon on change of planner points.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
... for consistency, while we are at it.
There are still some internal depth variables which are ints
somebody might take a go at those.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is needed in the altitude pressure conversion as there
negative altitudes are possible (for diving in the netherlands
or the Dead Sea).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.
Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.
Add line break before pO2 warnings but only if warnings exist.
Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the cylinder table today the cylinder start and end pressure fields
are marked red and the end pressure font is set to italic if cyl->end is 0.
But sometimes with planned dives there is no cyl->end but only cyl->sample_end.
This is taken into account now.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
