Since ff9506b21b the downloaders don't
add dives to a new trip and therefore the trip field of dc_user_device_t
became pointless. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since ff9506b21b the downloaders don't
add dives to a new trip, but the import code does. Remove the
code in the Uemis downloader that would remove a dive from the trip.
The code has been broken recently anyway (instead of testing for trip,
it tested for the notrip flag, which make no sense whatsoever).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This allows one to filter dives by divemode, e.g. by typing
"CCR" or "Open circuit" in the tags textbox of the filter tool.
Quite useful if one dives using more than one dive mode. For the
purpose of the filter tool only the dive mode attribute is added
to the list of tags for the specific dive being considered. The
tag list for the same dive (in the XML dive log) is not affected
in any way.
Provide for translation in alternative languages (Response to
bstoeger's suggestion).
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Some of the functions declarations were not in 'extern "C"',
despite being C functions. This worked only because they weren't
called from C++. Nevertheless, it seems like a dangerous proposition
to have the same function declared once as C and once as C++.
Therefore, always put them in extern "C" (if compiling in C++ mode,
evidently).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the XML and git savers, unchanged webservice-dive sites were
deleted. Since the webservice is not functional anymore, remove
this code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was defined in divelist.c, whereas it's better located
in divesite.c. Move it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function dive_set_geodata_from_picture() is only used in
dive.c. Make it local to that translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
6bf4120dbb replaced the trip flag by
a notrip boolean. This was supposed to signal that the user removed
the dive from a trip and therefore it shouldn't be autogrouped again.
Sadly, the commit removed the feature. Reinstate it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- The features in .DEREK.yml were not correctly stated as per
the user guide. They caused no harm, but may have been misleading
the features removed are all part of the "comments" feature.
- The new "pr_description_required" is turned on which helps
reduce maintainer fatigue when a contributor deletes the whole
text area / description of a new PR. Derek will advise as per:
https://github.com/alexellis/derek/blob/master/USER_GUIDE.md
- This version of Derek also includes the ability to use a slash
command in place of the text "Derek" i.e. "/add label" or
"/set milestone"
Signed-off-by: Alex Ellis <alexellis2@gmail.com>
Since a dive has only one location all-of makes little sense. It
*can* make sense if the user enters two substrings (e.g. Tofo and Reef),
but generally it won't. Therefore change the default to any-of.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
That's redundant with the information that we show in the window title (and
only risks going out of sync, as it is right now).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the filter numbers are now shown in the window titlebar, we can use this
space for an explanation of the two button (they already have tooltips, but
this is even easier for the user).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using the filter widget itself to show the information how many
dives are displayed, put it in the window title where it's visible even if the
filter widget isn't shown.
If the filter is not active, simply show the total number of dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only clear the filter when the user explicitly resets it. This way the user can
toggle between the map and the filter widget without losing the filter state.
Fixes#1952
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is not perfect - if you open the filter, set some criterion and then
remove it again (without resetting the filter), this variable will give you a
false positive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These features where already included there (but that happened on a branch, so
they are still listed in the CHANGELOG on master).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add an additional mode to the tags, people and location filters: any_of.
Replace the original invert-bool by an enum.
Move the common code into a distinct function.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-work reversed the direction of the offset. This was apparently
only fixed when using the menu entry, but not when editing dives directly.
Invert the offset to get the correct time.
While doing so, remove a redundant if: First it checked whether the
dates are the same, then whether the offset is non-zero.
Fixes#1975.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
And offer an option to show all devices in the settings. This is intentionally
not stored in the preferences as this should never be needed. We don't support
BT or BLE dive computers that we don't recognize. This is a last resort in case
a new firmware were to change the name or some other weird issue causes us not
to recognize a dive computer - and that should be fixed instead of worked
around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By default we'll only show devices that we believe to be dive computers,
but the user can override that with the recently introduced check box.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Which right now is of course what we do by default, the goal is to only show
what we think are dive computers, but allow to see all of them if the user
wants to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) remove Facebook integration (Dirk)
2) rewrite section about filter (Dirk)
3) insert section about bailout checkbox (Robert)
4) finalise section about surface GF in info box (Robert)
5) add export of profile graphic to .png (Robert)
6) update import of dives using universal import dialog (Miika)
7) some typos corrected and Robert's requests implemented
8) Factual info as wellas typos and corrections raised by
Miika and Dirk
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The pictures of the current dive were plotted on the profile.
In principle OK, as this is what the user is shown. Only on
export this results in all profiles having the same pictures.
Therefore, pass a dive argument to the picture-plotting function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The thumbnails were fetched in the background to achieve a
snappier UI. The problem with that is that on LaTeX etc.
export only placeholder thumbnails were shown.
Therefore, implement a synchronous mode. This only tries
to fetch cached thumbnails or calculate thumbnails for
images. Videos and remote files are not supported.
Fixes#1963
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With Facebook support gone, we should offer a way to export
the profile image. This has been part of the TeX support
but this makes it explicit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The info box can get longish. Offer the user to turn
off display of deco information (surface GF and
individual ceilings).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The most recent firmware of Shearwater computers shows this.
This is a measure of absolute amout of tissue loadings in an
easy to digest unit. Therefore it is useful to have.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The .cpp and .h files are all lower-case, the .ui file is camel-case.
Unify to lower-case (which is much more common in the code base).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
