For reasons of symmetry (there is a is_manually_added_dc()
function), create a make_manually_added_dc() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive-site editing can be reached from two states: from the
dive view and the dive list view. It always jumped back to
the dive view.
Therefore, remember the state. Use a stack-like structure, so
that the feature can be used for the dive-site view as well.
This is a bit inconsistent, because for example the statistics
view does not remember the previous state and allows a direct
jump to a different state. That should be fixed at some point.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to be one of the tab-widgets, which was illogical
and caused confusion. Notably, erroneously clicking on the
tab header led to a reset of the dive selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The map listens to the reset signal by itself.
This avoids double reload of the map on open/close.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Making this simply depend on Qt5 or Qt6 was short-sighted as work on QtLocation
upstream continues. Instead break this out as its own option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The undo stack is only relevant to the dives that were loaded at the
time the command was executed. If a file is closed, by specifically
closing it or opening another file, then the undo commands will
reference dives that aren't available anymore. Clearing the undo stack
ensures that we don't crash or accidentally do some undefined
modifications to the currently open file.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Currently, when the profile is in edit mode, the user can't
save, exit, plan a new dive and is requested to save the
current dive. However, this makes no sense anymore, since
the profile always switches to edit mode when showing a
manually added dive.
If the user has any unsaved profile changes, the usual
dirty checks of the undo-system apply.
Only show above behavior when in the planner. There it is
useful because, these are not included in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This only calls MainWindow::showProfile(), so simply call
that directly.
Moreover make two "public slots" private member functions,
since these were only called locally.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The mode of the profile (profile, edit, plan) was set in
MainWindow and ProfileWidget. For consistency move the one
setProfileState() call from MainWindow to ProfileWidget.
This removes a direct access to the profile-view and
therefore improves encapsulation.
Also, clear the profile, when no dive is shown to remove
any potentially dangling references.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was moved to the desktop version. Enter the profile in
the constructor. Somewhat surprisingly, this seems to work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a new class that encapsulates the profile-widget UI.
This is called ProfileWidget, which might be confusing since
the actual display is called ProfileWidget2. However, the
plan is to rename the latter to ProfileView. After all, it
is also used to print and to show the profile on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The MainWindow::configureToolBar() function is called every
time plotCurrentDive() is called. Moreover, this is the only
time that it is called. We might just fold the former into
the latter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The changes in commit 4daf687876 ("profile: remove [disable|enable]Shortcuts()
signals") resulted in us no longer enabling the shortcuts on the desktop (at
least on macOS where I debugged this). This placement of the call feels like a
bit of overkill, but at least it shouldn't be wrong.
Fixes#3293
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This occurs upon importing dives for example via CSV.
Make sure the profile display is cleared when selecting
such a dive rather than showing a different dive.
Allow editing the profile for such a dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The ADD state is not used for adding dives since adding dives
was made undoable. Therefore, rename it to EDIT state, since
that is what it is used for.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This flag is handled directly by the profile code
since 2015 (000c9cc21c).
The function therefore can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The backend infrastructure will soon be able to support more than one
cloud server which automagically stay in sync with each other.
One critical requirement for that to work is that once a session was
started with one of the servers, the complete session happens with that
server - we must not switch from server to server while doing a git
transaction. To make sure that's the case, we aren't trying to use DNS
tricks to make this load balancing scheme work, but instead try to
determine at program start which server is the best one to use.
Right now this is super simplistic. Two servers, one in the US, one in
Europe. By default we use the European server (most of our users appear
to be in Europe), but if we can figure out that the client is actually
in the Americas, use the US server. We might improve that heuristic over
time, but as a first attempt it seems not entirely bogus.
The way this is implemented is a simple combination of two free
webservices that together appear to give us a very reliable estimate
which continent the user is located on.
api.ipify.org gives us our external IP address
ip-api.com gives us the continent that IP address is on
If any of this fails or takes too long to respond, we simply ignore it
since either server will work. One oddity is that if we decide to change
servers we only change the settings that are stored on disk, not the
runtime preferences. This goes back to the comment above that we have to
avoid changing servers in mid sync.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We know the preference is never empty, so stop testing for this. But
don't maintain two different preferences with basically the same
content. Instead add the '/git' suffix where needed and keep this all in
one place.
Simplify the extraction of the branch name from the cloud URL.
Also a typo fix and a new comment.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When showing the "empty-state", the profile toolbar was
disabled. This was done via a "reverse" signal from the
profile to the MainWindow. Instead control the toolbar
in the MainWindow directly. Break out the plot-dive
functionality into a member function and there test
whether a dive is shown or not.
The signal makes no sense in the context of mobile
or printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When switching to the "plan" or "add" (which should rather be
called "edit", by the way) mode of the profile, the "shortcuts"
for copy&paste, undo&redo, etc. are disabled. When switching
to "profile" mode, they are reenabled.
This was done in a most convoluted way:
- The MainWindow calls the set*State() function of the profile.
- The Profile emits [disable|enable]Shortcuts() signals.
- The MainWindow catches these signals and does the enabling
or disabling.
Not only is this very hard to reason about, it is also in
contradiction to the profile being part of the display layer.
Moreover, in editCurrentDive() the MainWindow disabled the
shortcuts itself, so this was all redundant.
For the sake of sanity, let's just move this logic to the
MainWindow, unslotify the [disable|enable]Shortcuts() functions
and make them private.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive handlers are only updated by signals. This means that
switching into edit-mode has to be done in steps:
1) initialize the DivePointsPlannerModel
2) switch profile mode
3) load dive into DivePointsPlannerModel
2) and 3) cannot be exchanged, or the dive handlers are not
initialized.
To avoid this sandwitching of profile- and model-initialization,
populate the dive handlers when switching the profile mode.
Thus, the profile can be switched into edit/plan mode when
the DivePointsPlannerModel is fully initialized.
This will be important in upcoming commits, when the initialization
of the dive is moved from the profile to the DivePointsPlannerModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove mainwindow-access from the planner, by setting
the profile to planner state in the owner of the profile,
viz. the MainWindow.
The MainWindow sets the application state to planner, so
it seems legit that it also sets the profile state.
This removes a further interdependency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far the profile operated on the global displayed_dive. Instead,
take the dive to be displayed as a parameter to the plotDive()
functions.
This is necessary if we want to have multiple concurrent
profile objects. Think for example for printing or for mobile
where multiple dive objects are active at the same time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove global state, make the dive that DivePlannerModel
works on a member variable. Pass the dive in createSimpleDive()
and loadFromDive(). Moreover, this should pave the way to more
fine-grained undo in the planner. Ultimately, the planner
should not be modal.
Attention: for now, the dive must still be displayed_dive,
because of the convoluted way in which the profile and the
planner work on the same dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both loadFromDive() callers were clearing the model before
calling loadFromDive(). Move the clearing into that function
since it makes no sense to load into a non-cleared model.
Apparently this changes the way that no-cylinder dives are
treated and the code in ProfileWidget2::repositionDiveHandlers()
must now explicitly check for that condition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This model is only needed when in plan mode. To enable multiple
profilewidgets at the same time (e.g. for the mobile app or
for printing), make the pointer to DivePlannerPointsModel a
member variable that is initialized at construction time.
Moreover, allow passing null as the DivePlannerPointsModel,
in which case planning will be disabled. This will be useful
for simple printing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The application state is a desktop-only thing. The mobile UI
also has its application state, but that is something completely
different.
The last remaining user of the application state was to flag
whether the planner is active. Since this has all been
unglobalized, the ApplicationState structure can be moved
from core to the desktop UI. And there it can be made local
to the MainWindow class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TemplateLayout prints different dives depending on
whether the planner is active. Instead of accessing a
global variable, pass the status down from the MainWindow.
That's all quite convoluted, since there are multiple
layers involved.
On the positive side, the in_planner() function has now
no users an can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On first startup, use the splitter values suggested by Dirk:
Top/Bottom: 60/40
Info/Profile: 50/50
List/Map: 60/40
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On state change, the splitters were completely emptied and
refilled. Instead try to reuse already existing splitter
slots. This reduces annoying flickering.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The memory management of the quadrant widgets is a total mess:
When setting the widget, the QSplitters take ownership, which
means that they will delete the widget in their destructor.
This is inherently incompatible with singletons, which must
not be deleted.
To avoid all these troubles, remove the widgets from the
QSplitters in the desctructor of the MainWindow. This of
course means that we now have to take care about deletion
of the widgets.
For local widgets use std::unique_ptr, for singletons use
a static variable that is deleted on application exit.
Sadly, for the map widget we can't use a normal singleton,
because the QML MapWidget's memory management is buggy.
Add a comment in the source code explaining this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When in planner mode, don't allow the user to change the application
state. This brought us nothing but troubles and inconsistencies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was the "application state", which decided what to show
in the "quadrants" and the "view state" which decided which
quadrant to show. These interacted in a hard-to-grasp way.
The "view state" is used to show the map or dive list in
full screen.
I simply couldn't get these two orthogonal states to interact
properly. Moreover the thing was buggy: If a quadrant was hidden,
the user could still show it, by dragging from the side of the
window, at least under KDE.
To solve these woes, merge the two states into a single
application state. If the widget of a quadrant is set to null,
don't show it. So the four "view states" are now "application
states" where three of the four quadrants are not shown.
This also changes the memory management of the widgets:
widgets that are not shown are now removed from the QSplitter
objects. This makes it possible that the same widget is
shown in *different* quadrants.
While writing this, I stumbled upon a Qt bug, which is known
since 2014:
https://forum.qt.io/topic/43176/qsplitter-sizes-return-0
When restoring the quadrant sizes there was a test whether
the quadrant size is 0. If that was the case, a default size
was set. This seems not to work if the widgets were recently
added. Since this test now always fails, make the quadrants
non-collapsible and thus guarantee that 0 is never saved as
a size.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new "statistics" application state. In the statistics state
show the statistics widget and the filter in the top quadrants.
The idea is to allow filtering and doing statistics at the same
time.
Sadly, we can't use the filter-widget in different quadrants,
because Qt's ownership model is completely broken / inflexible.
It does not support a widget having different parents and
thus a widget can only belong to one QStackedWidget.
Hiding the map in the statistics view is quite hacky:
Since the view of the quadrants is not determined by the
"ApplicationState", we have to restore the original quadrant
visibility when exiting the stats mode. Therefore, set the
original visibility-state when changing application state.
The MainWindow-quadrant code really needs to be rewritten!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The mainwindow was connecting preferences changes to the profile.
Do this directly in the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Around 2015 there was a push to move planner UI code from
mainwindow.cpp to diveplanner.cpp. That never was completed,
presumably because the planner is actually three widgets.
Collect these widgets in one PlannerWidgets class and move
the code there.
This is not a full dis-entanglement, as the plannerwidgets
have to access the profile via the mainwindow. But at least
it collects the planner UI code at a single place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The main window called a function to init the header actions
(i.e. the context menu) of the dive-list. There is no reason why
this shouldn't be done in the constructor of the dive list, since
it only accesses the QSettings, which are available at application
startup. This improves modularity of the code (by a tiny, tiny bit).
Moreover, the initialization function was at the same time the
header-reloading function. That function can now be folded
into the settings-changed function, since that is the only
remaining user.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far, the PreferencesDialog emitted a settingsChanged signal.
This meant that models that listened to that signal had to
conditionally compile out the code for mobile or the connection
had to be made in MainWindow.
Instead, introduce a global signal that does this and move
the connects to the listeners to remove inter-dependencies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to reload the completion models. Moreover, remove two
obsolete member-function declarations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to unify both methods of tracking unsaved
changes. Since desktop now only uses the undo system, it can
be replaced by a single call to "Command::setClean()".
Arguably, the UI is the wrong place to do this and the appropriate
calls should be done by the core. However, let's play it safe
for now and avoid any breaking change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was used to unify both methods of checking for
unsaved changes: the global unsaved_changes() flag and the
Command::clean() function of the undo-system.
However, all desktop functions are now undoable and therefore
the function is not needed and can be replaced by calls
to !Command::clean().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a device_table parameters to Command::importTable() and
add_imported_dives(). The content of this table will be added
to the global device list (respectively removed on undo).
This is currently a no-op, as the parser doesn't yet fill
out the device table, but adds devices directly to the global
device table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to avoid the parsers to directly modify global data,
we have to provide a device_table to parse into. This adds such
a state and the corresponding function parameters. However,
for now this is unused.
Adding new parameters is very painful and this commit shows that
we urgently need a "struct divelog" collecting all those tables!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing dive-sites we would add to the global filter-preset
table. This data should be thrown away, just like the other tables
that might be imported.
This shows that we really should introduce a "struct divelog",
which collects all those tables into a single structure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used a typedef "filter_preset_table_t" for the filter preset table,
because it is a "std::vector<filter_preset>". However, that is in
contrast to all the other global tables (dives, trips, sites) that we
have.
Therefore, turn this into a standard struct, which simply inherits
from "std::vector<filter_preset>". Note that while inheriting from
std::vector<> is generally not recommended, it is not a problem
here, because we don't modify it in any shape or form.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The name "FilterWidget2" is historical and has no meaning anymore,
since the current version has little to nothing to do with the
"second" version of the widget.
Rename the class and source files accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing a divelog, import filter presets. If there are
equal names, import only if the presets differ. In that case,
disambiguate the name. This made things a bit more complicated,
as comparison of filter presets had to be implemented.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter widget was caching whether the filter was active and
used that flag to calculate the "# dives shown" string. Move this
directly to the DiveFilter class to remove interdependencies and
to unify with mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a bit painful: since we don't want to modify the filter
presets when the user imports (as opposed to opens) a log,
we have to provide a table where the parser stores the presets.
Calling the parser is getting quite unwieldy, since many tables
are passed. We probably should introduce a structure representing
a full log-book at one point, which collects all the things that
are saved to the log.
Apart from that, this is simply the counterpart to saving to XML.
The interpretation of the string data is performed by core
functions, not the parser itself to avoid code duplication with
the git parser.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When planning a dive, dc_number was set to 1, which actually is
the second dc! The code seems to handle this gracefully, however
it appears weird. Let's set dc_number to 0 instead.
Originally, the assignment was introduced in a422957cd6
and moved later in 4f5621c4c6.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive has no explicity salinity, our conversion
between pressure and depth assumed salt water. Make this
explicity by using the corresponding macro.
When the planner starts and no salinity is set explicity,
set the water type chooser to salt water to reflect
our default assumption.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
There is no reason that this dialog is a singleton. Since it is modal,
it can be created on demand. This simplifies code, because the mode
(selected-only or all-dives) can be set in the constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move this function from maintab.cpp to qthelper.cpp. Since the
functionality was used in numerous places, use the helper function
there as well. This removes a number of inconsistencies. For example,
sometime setTimeSpec(Qt::UTC) was called, even though the
QDateTime object was already created with that time spec.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was an old "optimization" to avoid double plotting of the
pictures, first by the profile itself, then by the picture tab.
Since the profile now updates the pictures itself, this must
be removed: The picture tab doesn't do it anymore.
Fixes#2833
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To reset the core data structures, the mobile and desktop UIs
were calling into the dive-list models, which then reset the
core data structures, themselves and the unrelated
locationinformation model. The UI code then reset various other
things, such as the TankInformation model or the map. . This was
unsatisfying from a control-flow perspective, as the models should
display the core data, not act on it. Moreover, this meant lots
of intricate intermodule-dependencies.
Thus, straighten up the control flow: give the C core the
possibility to send a "all data reset" event. And do that
in those functions that reset the core data structures.
Let each module react to this event by itself. This removes
inter-module dependencies. For example, the MainWindow now
doesn't have to reset the TankInfoModel or the MapWidget.
Then, to reset the core data structures, let the UI code
simply directly call the respective core functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When printing, the dive plan was prepended with a logo, a disclaimer
and the profile. Then it was restored by setting the plan of
displayed_dive.
Instead, simply save the original plan in a QString and restore that.
This removes a further dependency on displayed_dive, which I'd like
to make local to the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MainWindow::editCurrentDive() used to be a general function to enter
edit mode. Nowadays, this is only called for one very specific case,
namely editing the profile of a manually added dive. Therefore, we
can remove the if-branch that dealt with planned dives.
Moreover, we can do the test right at the beginning and remove
a warning message for duplicate "edition", as this is not
possible anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was only one caller of MainWindow::setupForAddAndPlan() left
and that caller immediately called DivePlannerPointsModel::createSimpleDive().
Thus, we might just as fold the former in the latter and thus
concentrate all the prepare-dive-for-plan business in one place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, the MainWindow doesn't have to extract the plan from
displayed_dive. This is a tiny step in an attempt to detangle
the interfaces. The bigger goal will be to make displayed_dive
local to the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When calculating variations, they were sent to the mainwindow,
which updated displayed_dive accordingly. Do this directly
in the planner-model.
The idea is to detangle interdependencies and to make the
code reusable (planner on mobile?).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When there is no current dive, mainTab->updateDiveInfo() implicitly
clears the tabs. There is no need to call this explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
ProfileWidget2::plotDive() had this weird interface, where passing
in NULL as dive would mean "show current_dive". However, most callers
would already pass in current_dive. Therefore, unify and always pass
in current_dive if the caller wants to draw the current dive.
This allows us to interpret NULL as "show empty profile". Thus,
passing in current_dive when there is no current_dive simply shows
an empty profile. This makes the calling code in
MainWindow::selectionChanged() simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Firstly, the parameter appears conceptually wrong, as replot suggests
that the currently shown dive is replot. Secondly, the only caller that
passed a parameter was passing in current_dive, which is just what happens
if one doesn't pass a parameter. Therefore, change that caller (call
plotDive directly) and remove the parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used to cancel a plan (or profile edit) when the user quit
the application while planning. This is inconsistent with
respect to closing or opening a different log, where the user
was asked for confirmation.
Thus, for consistency and to avoid loss of a planned dive,
use the okToClose() function in on_actionClose_triggered() of
MainWindow. As an added bonus, this saves a few SLOC.
Fixes#1078
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move this to the core so that desktop and mobile don't have
to call this explicitly. Matter of fact, mobile didn't call
this. It is unclear, whether that was even used on mobile,
though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to keep the device nodes if all the other data
is cleared. Let's do this automatically and not explicitly.
This ensures that the function is also called on mobile.
Currently it was only called on desktop.
Weirdly, the parser-tests were expecting that the device nodes
were not reset by clear_dive_file_data() and therefore divecomputers
were accumulating in the test results. Thus, the additional
computers had to be removed from the expected test results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
MainWindow::on_actionAddDive_triggered() updated the profile after
calling Command::addDive(). However, that is redundant because the
undo-machinery does the profile reload. Remove the call.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All remaining callers were passing MANUALLY_ADDED_DIVE as a new
mode, so we may just as well remove the parameter and thus
simplify the logic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only way to enter edit mode is to edit the profile. However,
that means that the profile is already visible, so there is no
need to change the mode. Simply remove the EDIT mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When entering the edit state, we don't want the user to be able
to undo/redo lest things become inconsistent. Since the only way
to enter edit state is to edit the profile, we can simply use
the disableShortcuts() function that is used by the profile
when it goes into edit state.
This has one desirable side-effect: Undo is now also disabled in
the planner. Undo during planning likewise can lead to inconsistent
state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile can only be edited for manually added or planned
dives. No point in keeping code for other kinds of dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The CylinderModel always accessed the global "displayed_dive" and in
some special cases also "current_dive". To implement cylinder undo,
the model should work on an arbitrary dive. Therefore, in analogy
to the weight model, make the dive dynamic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive list is cleared or updated, the entries in the
divesite-model become stale and therefore the divesite-model
(with the actual name LocationInformationModel) also must be
updated. This was done manually in some parts of the code and
forgotten in others. Therefore, do it directly in the clear()
and reset() function of the dive list-model.
This might be a bit of a layering violation: why should one
model call into another if they are not in parent/child
relationship? However, this seems easier than introducing
a global "reset dives" function that coordinates the models.
Moreover, it does not appear 100% safe: if the clearing of
the divesite model causes accesses to the divelist-model,
they happen in the midst of a model reset and we had horrible
bugs with that kind of things. However, I don't think that
should happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive data is cleared, all pointers in the undo-stack become stale.
Desktop explicitly called Command::clear() in that case, but mobile doesn't.
Thus, move the clear() call into DiveTripModelBase::clear()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At least in those cases where we are sending a divesChanged signal we can
easily check if the cache was properly invalidated. Of course this won't help
in cases where we don't notify the dive list about changes, either.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylinder-model had an instance() function, but actually
there were two cylinder models: one used by the equipment tab,
one used by the planner.
This is misleading. Therefore, remove the instance() function
and make the cylinder-model a subobject of the planner-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The UI talks to the filter model. Therefore route clearing of
data through that model instead of accessing the source model
directly.
This will allow us to remove the DiveTripModel::instance()
function and makes control flow less "jumpy".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function had only one line and had only one caller.
We might just as well fold that line into the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By clearing the model, its contents are removed. There is no
point in reloading the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
