The dive_table will be converted into a table of owning pointers.
Since the trip has only non-owning pointers to dives, turn
its dive_table into an std::vector<dive *>.
Add a helper functions to add/remove items in a sorted list.
These could be used elsewhere.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the sorted_owning_table depends on the fact that
different elements never compare as equal, make the
comparison function safer in that respect. If all failes,
compare the pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This had to be done simultaneously, because the table macros
do not work properly with C++ objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since struct divecomputer is now fully C++ (i.e. cleans up
after itself), we can simply turn the list of divecomputers
into an std::vector<>. This makes the code quite a bit simpler,
because the first divecomputer was actually a subobject.
Yes, this makes the common case of a single divecomputer a
little bit less efficient, but it really shouldn't matter.
If it does, we can still write a special std::vector<>-
like container that keeps the first element inline.
This change makes pointers-to-divecomputers not stable.
So always access the divecomputer via its index. As
far as I can tell, most of the code already does this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a rather long commit, because it refactors lots of the event
code from pointer to value semantics: pointers to entries in an
std::vector<> are not stable, so better use indexes.
To step through the event-list at diven time stamps, add *_loop classes,
which encapsulate state that had to be manually handled before by
the caller. I'm not happy about the interface, but it tries to
mirror the one we had before.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a hairy one, because the sample code is rather tricky.
There was a pattern of looping through pairs of adjacent samples,
for interpolation purposes. Add an range adapter to generalize
such loops.
Removes the finish_sample() function: The code would call
prepare_sample() to start parsing of samples and then
finish_sample() to actuall add it. I.e. a kind of commit().
Since, with one exception, all users of prepare_sample()
called finish_sample() in all code paths, we might just add
the sample in the first place. The exception was sample_end()
in parse.cpp. This brings a small change: samples are now
added, even if they could only be parsed partially. I doubt
that this makes any difference, since it will only happen
for broken divelogs anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This allows us to use non-C member variables. Convert a number
of pointers to unique_ptr<>s.
Code in uemis-downloader.cpp had to be refactored, because
it mixed owning and non-owning pointers. Mad.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since everything is C++ now, we can use unique_ptr<>s. This makes
the code significantly shorter, because we can now use the default
move constructor and assignment operators.
This has a semantic change when std::move()-ing the divelog:
now not the contents of the tables are moved, but the pointers.
That is, the moved-from object now has no more tables and
must not be used anymore. This made it necessary to replace
std::move()s by std::swap()s. In that regard, the old code was
in principle broken: it used moved-from objects, which may work
but usually doesn't.
This commit adds a myriad of .get() function calls where the code
expects a C-style pointer. The plan is to remove virtually all of
them, when we move free-standing functions into the class it acts
on. Or, replace C-style pointers by references where we don't support
NULL.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was the only dive_site_table function that accessed
to global divelog, which is odd. Make it consistent with
the others.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were a number of free standing functions acting on a
dive-site-table. Make them member functions. This allows
for shorter names. Use the get_idx() function of the base
class, which returns a size_t instead of an int (since that
is what the standard, somewhat unfortunately, uses).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a long commit, because it introduces a new abstraction:
a general std::vector<> of std::unique_ptrs<>.
Moreover, it replaces a number of pointers by C++ references,
when the callee does not suppoert null objects.
This simplifies memory management and makes ownership more
explicit. It is a proof-of-concept and a test-bed for
the other core data structrures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We can now return mutable/imutable depending on const-ness of
the parameter, owing to parameter overloading.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Makes the code much nicer to read.
Default initialize cylinder_t to the empty cylinder.
This produces lots of warnings, because most structure are now
not PODs anymore and shouldn't be erased using memset().
These memset()s will be removed one-by-one and replaced by
proper constructors.
The whole ordeal made it necessary to add a constructor to
struct event. To simplify things the whole optimization of
the variable-size event names was removed. In upcoming commits
this will be replaced by std::string anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this is now in C++, we don't have to use our crazy
TABLE_* macros.
This contains a logic change: the dives associated to a
dive site are now unsorted.
The old code was subtly buggy: dives were added in a sorted
manner, but when the dive was edited the list was not
resorted. Very unlikely that this leads to a serious
problem, still not good.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the taxonomy is now a real C++ struct with constructor
and destructor, dive_site has to be converted to C++ as well.
A bit hairy for now, but will ultimately be distinctly simpler.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use std::vector<> instead of fixed size array.
Doesn't do any logic change, even though the back-translation
logic is ominous.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix an issue introduced in #4148.
Essentially the refactoring missed the fact that in the imperial system
tank size is tracked as the free gas volume, but in the metric system
(which is the one used in most of Subsurface's calculations) tank size
is tracked as water capacity.
So when updating a tank template tracking imperial measurements, the
given (metric) volume in l has to be multiplied by the working pressure,
and vice versa.
This also combines all the logic dealing with `tank_info` data in one
place, hopefully making it less likely that this will be broken by
inconsistencies in the future.
Fixes#4239.
Signed-off-by: Michael Keller <github@ike.ch>
- show the correct gasmix in the profile;
- make gases available for gas switches in the profile after they have
been added;
- persist gas changes;
- add air as a default gas when adding a dive.
This still has problems when undoing a gas switch - instead of
completely removing the gas switch it is just moved to the next point in the
profile.
Signed-off-by: Michael Keller <github@ike.ch>
A long standing issue: the dives_to_add, etc. tables need to be
manually freed. This kind of problem wouldn't arise with proper
C++ data structures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code was leaking memory. Use std::unique_ptr<> for
ownership management.
This is still very primitive and divetags are kept during
application lifetime. There should probably be some form
of reference counting. And the taglist should not be global,
but attached to the divelog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As far as I can see there are no translation strings for the
cylinder names, so there is no point in translating them back.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The combo-boxes (cylinder type, weightsystem, etc.) were controlled
by global models. Keeping these models up-to-date was very combersome
and buggy.
Create a new model everytime a combobox is opened. Ultimately it
might even be better to create a copy of the strings and switch
to simple QStringListModel. Set data in the core directly and
don't do this via the models.
The result is much simpler and easier to handle.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mostly irrelevant std::move() stuff of copy-on-write Qt objects,
a few real bugs, a timestamp_t downconversion and some codingsyle
adaptation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unfortunately Coverity doesn't understand that most Qt data
structures are copy-on-write. It's a mis-feature of Qt, but
it is the way it is. Thus, passing by value is not an issue.
Out of ca. 25 warnings only two were legit. Let's silence
the others by either std::move()ing or passing by reference,
as would be idiomatic C++, which Qt is not.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-code uses owning pointers based on std::unique_ptr to
manage lifetime of C-objects. Since these are generally useful,
move them from the undo-code to the core-code. In fact, this
eliminates one instance of code duplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The trip selection code was an awkward layering violation.
Whereas dive selections due to dive undo-commands trickled
down via DiveTripModel-->MultiFilterSortModel-->DiveListView,
for trip editing, the DiveListView directly intercepted the
TripEdited signal.
Instead, mimic the dive-selection code. This is a bit longer
but more consistent and logical. The undo/redo of trip changes
is now also a "programmatical" change of the selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This tries to encapsulate the management of the current dive and
divecomputer in the selection code. The current dive is alreay
set by setSelection(). Add a new parameter to also set the
current divecomputer. If -1 is passed, then the current
computer number is remained. This will allow us to audit the code.
Because for now, the whole "current dive computer" thing seems
to be ill-defined.
This fixes a bug: the dive-computer number wasn't validated
when making a new dive the current dive. The new code has some
drawbacks though: when selecting a whole trip, the validation
will be called for all dives in the trip and thus the dive computer
number will depend on the dive with the lowest amount of dive
computers in the trip. This will need to be fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser API was very annoying, as a number of tables
to-be-filled were passed in as pointers. The goal of this
commit is to collect all these tables in a single struct.
This should make it (more or less) clear what is actually
written into the divelog files.
Moreover, it should now be rather easy to search for
instances, where the global logfile is accessed (and it
turns out that there are many!).
The divelog struct does not contain the tables as substructs,
but only collects pointers. The idea is that the "divelog.h"
file can be included without all the other files describing
the numerous tables.
To make it easier to use from C++ parts of the code, the
struct implements a constructor and a destructor. Sadly,
we can't use smart pointers, since the pointers are accessed
from C code. Therfore the constructor and destructor are
quite complex.
The whole commit is large, but was mostly an automatic
conversion.
One oddity of note: the divelog structure also contains
the "autogroup" flag, since that is saved in the divelog.
This actually fixes a bug: Before, when importing dives
from a different log, the autogroup flag was overwritten.
This was probably not intended and does not happen anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
3629a87 changed the handling of cylinders in multi-dives edit.
Not only should the cylinders be the "same", but also at the
same position. The code did not check whether the edited dives
even had that many cylinders, leading to a null-pointer
dereference.
Check whether the cylinder exists before comparing it.
Fixes#3578.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This rarely gets seen / looked at, but it can help make it easier
to understand what a user was doing when trying to restore dives
that were inadvertantly deleted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also allow editing sensor on a cylinder with already attached sensor.
This will swap the sensor data with the cylinder that it is taking the
sensor data from, removing the need for adding an extra temporary
cylinder when swapping two sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
The last caller of find_cylinder_index() was removed in
3629a87fcc. Also remove functions that where only called by
this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
