In the planner we used to filter out "unused" cylinders as in the
equipment tab. It is unclear whether that makes sense or can even
easily be reproduced, since such cylinders have to come from an
imported dive.
To be on the save side, let's not do this. Replace the
CylindersFilteredModel introduced recently by a plain
CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder-model had an instance() function, but actually
there were two cylinder models: one used by the equipment tab,
one used by the planner.
This is misleading. Therefore, remove the instance() function
and make the cylinder-model a subobject of the planner-model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, we do substring search. Implement starts-with and
exact mode (for example when search for "Cave vs. Cavern" tags).
For each textual search criterion add a combo-box.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These just make no sense. Since the value is copied, it
has no meaning to the caller whether the function can
change the value (and vice versa for return types).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
exportFunc was a collections of functions for exporting dive data.
It had no state, therefore there is no reason for it to ever be
instantiated.
Simply remove the class. Rename the saveProfile function to
exportProfile so that all export functions start with "export".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When exporting dives we show a message. The message is closed when
the export is finished. This is coordinated by a QFuture. Instead
of keeping a global QFuture in the export-code, pass it around
as a local variable.
This is supported according to Qt's documentation:
"QFuture is a lightweight reference counted class that can be
passed by value." and the source code indicates the same.
Not only does this remove a global, it also makes the code
more flexible: Now we could show one notification per export,
for example.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix two issues:
1) When narrowing the selection, we didn't get setSelection()
calls. Only, when the user released the mouse button was
the selection updated. Therefore, hook into the mouse-release-
event and update the UI if the selection changed.
2) We updated the ui in setSelection(). However, this was called
on mouse-move even if the actual selection didn't change.
Therefore, compare selection before and after processing of
the event and only refresh the UI if there are changes.
Clearly, this can only be a quick stopgap solution and we
should find out how to properly hook into the selection change
machinery. Though see commit 4928c4ae04
for the reason why we do things as we do them.
Fixes#2595
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole point of having X::instance() functions is to solve
the infamous "Static Initialization Order Fiasco": When having
global objects in different translation units, their order
of initialization is undefined. Thus, when these objects access
each other one cannot guarantee the correct order of
initialization. The X::instance() functions generate the objects
on first use.
DivePlannerPointsModel has such an instance() function. However,
for convenience(?) in diveplanner.cpp we find the global variable
static DivePlannerPointsModel* plannerModel =
DivePlannerPointsModel::instance();
Thus, the DivePlannerPointsModel constructor is run before main(),
negating the whole purpose of the instance() function.
Let's remove this line to avoid hard-to-debug startup issues.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the dive site screen, when entering invalid GPS coordinates,
we cleared the location of the dive site. Don't do this. To
clear the location, the user now has to enter the empty string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the dive site edit screen, when the user enters invalid
coordinates and saves, we treat this as "no location". This
is rather unfriendly, therefore warn the user with a visual
clue. This is performed by setting the background color of
the widget to red.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After selecting dives, the selected dive sites are collected.
This was done using the selectionModel()->selection().indexes(),
which is wrong, because it gives one index per row *and* column.
Accordingly, every dive site was added numerous times to the
array of dive sites to be selected. Change this to
selectionModel()->selectedRows(), which gives one entry per row.
Moreover, if multiple dives with the same site were selected,
this site was also added to the array multiple times. Therefore,
check the array before adding sites.
Note that all this should not change the user experience in
any way, it is only a code-hygiene thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Usually, we use PascalCase (i.e. camelCase with a capital
letter at the start) for class names. For consistency, let's
do it here as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This class contains only static functions (i.e. it does not contain
any state). There does not seem to be a reason to have an instance
of that class. Therefore, remove the instance() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't be part of the desktop UI code; there's still the issue that we
really shouldn't hand code XML parsing, but I'll leave that for later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows Subsurface to obtain the coordinates of a dive directly
from a GPS track. It parses a GPX file (GPX V1.0 or V1.1) from
a GPS to locate the trackpoint immediatedly after the start of a
dive. There is an additional "Use GPS file" button in the Edit Dive
Site panel that is selected from the Notes tab. Image:
This allows one to select a GPX file, bringing up the Import GPS
dialog.
There is extensive provision for cross-checking that the dive track
synchronises with the dive start and end. If the Save button in the
dialog is pressed the dive coordinates are copied into the Dive
Coordinates text box in the Edit Dive Site panel. The map moves
to indicate the location of the dive site.
The bulk of the work is done in importgps.cpp. The code is
pretty intergrated: I tried to break it up in smaller commits but that
was not feasible.
The code includes responses to the comments by @neolit123 and
@bstoeger. The C-based file input was replaced with Qt-based
code using QChar, QString and QFile.
[Dirk Hohndel: fixed several small issues in the .ui file, removed
various headers includes that weren't needed and
fixed printing of minutes as zero padded]
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change ascent/descent setter function names to set_<name>Display
to show the value is prepared for displaying (common for desktop and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The spinboxes are already connected to diveplannermodel set_ functions, remove
second connect to plannerShared.
Change get functions to use diveplannermodel.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove string version of unit_system, duration_units, length, pressure,
temperature, vertical_speed_time, and volume, including tests and make signals
strongly typed in C++
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's not even clear if we need the setCaseSensitivity() call as it appears
that a case insensitive completer is the default.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While technically the initial value of this variable makes no difference as
it is set when the first dive is displayed, technically Coverity is correct.
Fixes CID 353273
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last SIGNAL/SLOT cannot be converted due to a limitation in the
new connect() syntax, it does not "understand" default parameters.
Signed-off-by: jan Iversen <jan@casacondor.com>
Change connect for QAbstractButton::clickedto new syntax.
Change connect for QDialogButtonBox::accepted/rejected to new syntax.
Signed-off-by: Jan Iversen <jan@casacondor.com>
