The code pretended to support this for libdivecomputer based downloads,
but it had never been hooked up when the native Uemis downloader was
implemented. When I finally decided to close that feature gap I realized
that the original code was, shall we say, "aspirational" or "completely
bogus" and therefore never worked.
So instead of just hooking up the code for the Uemis downloader I instead
implemented this correctly for the first time for both libdivecomputer and
the native Uemis downloader.
In order not to have to mess with multithreaded Gtk development I simply
opted for a helper function that fires on a 100ms timeout and have it end
the dialog without a response. This way we can run the dialog while
waiting for the download to finish, still update the progress bar and
respond in a useful manner to the user clicking cancel.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may seem like an esoteric corner case, but it will actually happen
reliably when re-downloading dives from the Uemis SDA:
If the user selects "Force downloada of all dives" in the "Download from
divecomputer" dialog and if the SDA runs out of space and needs to be
unmounted and remounted, then for the 'Retry' the 'force' flag should be
cleared - or the user will once again start from the first dive which
almost certainly is not what they expect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This mirrors commit 59929fdb5d2a "Mark divelist changed as we download
dives from a dive computer" which only fixed things for the
libdivecomputer case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows zooming in with the scroll-wheel if you have one (or the
two-finger scrolling on a touchpad).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think I prefer the 2.5x zoom over the pure doubling.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shows the values for all the graphs that are shown (depth,
temperature, tank pressure, pO2, pN2m pHe), but also correctly doesn't
display them when they are turned off or no data is available (prior to
this commit, tank pressure was always shown, even if no pressure samples
were available for the dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus convinced me that I was wrong to modify his commit 24690ce35f81
"Initial not-so-pretty profile zoom support" and so this changes it back
to use the left mouse button for zooming. It turns out that on some
touchpads there's a very nice way to hold down the click with one finger
and then pan with another finger, but that does not work if you do a two
finger click (and use one of those or a third to pan).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This extends on our current tooltip logic (which shows events when you
mouse over them) to show tooltips for the whole profile area.
If you mouse over an event, that is still shown in the tooltip, but
even in the absense of events, the tooltip will be active, and mousing
over the profile area will show the time, depth and pressure.
This can certainly be improved upon further, but even in this form it is
useful.
Fixes#9
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will hopefully not be something we need often, but if we improve
support for a divecomputer (either in libdivecomputer or in our native
Uemis code or even in the way we handle (and potentially discard) events),
then it is extremely useful to be able to say "re-download things
from the divecomputer and for things that were not edited in Subsurface,
don't try to merge the data (which gives BAD results if for example you
fixed a bug in the depth calculation in libdivecomputer) but instead
simply take the samples, the events and some of the other unedited data
straight from the download".
This commit implements just that - a "force download" checkbox in the
download dialog that makes us reimport all dives from the dive computer,
even the ones we already have, and an "always prefer downloaded dive"
checkbox that then tells Subsurface not to merge but simply to take the
data from the downloaded dive - without overwriting the things we have
already edited in Subsurface (like location, buddy, equipment, etc).
This, as a precaution, refuses to merge dives that don't have identical
start times. So if you have edited the date / time of a dive or if you
have previously merged your dive with a different dive computer (and
therefore modified samples and events) you are out of luck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
You can press the left mouse-button on the profile and drag the mouse
around to zoom in on a specific area. Releasing the mouse button unzooms.
Yeah, everybody wants rubber-banding, but I have reached the end of my
willingness to fight gtk for more details. Some day.
[Dirk Hohndel: changed this to use the right mouse button instead of the
left which seemed just terribly unnatural]
References ticket 9
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The tec diving preference pane now allows us to set a partial pressure
threshold for each of the three gases. When the partial pressure surpasses
that value, the graph becomes red.
Fixes#12
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default filename handling is broken in two different ways:
(a) if we start subsurface with a non-existing file, we warn about
the inability to read that file, and then we exit without setting the
default filename.
This is broken because it means that if the user (perhaps by mistake,
by pressing ^S) now saves the file, he will overwrite the default
filename, even though that was *not* the file we read, and *not* the
file that subsurface was started with.
So just set the default filename even for a failed file open.
The exact same logic is true of a failed parse of an XML file that we
successfully opened. We do *not* want to leave the old default
filename in place just because the XML parsing failed, and possibly
then overwriting some file that was never involved with that failure
in the first place. So just get rid of all the logic to push the
filename saving into the XML parsing layer, it has zero relevance at
that point.
(b) if we do replace the default filename with a NULL file, we need
to set that even if we cannot do a strdup() on the NULL.
This fixes both errors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now throw away redundant events, just as we throw away other redundant
data coming from the dive computer. Events are considered redundant if
they are less than 61 seconds apart and identical.
This also improves the display of the remaining events in the profile as
we now show the value of the event, if it is present (for example for a
deco event we show the duration of the deepest stop).
Finally, for events that define a range (so they set the beginning flag
and assume and end flag some time later) we no loger show the triangle but
assume that some other code handles visualizing them (as happens for the
ceiling events).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was introduced in commit ee803ef5d85b "Change preferences into a
notebook and add second page for tec settings"
In order to be able to get the new default XML file name back from the
button, we need to keep that variable around and not overwrite it with
more buttons for the tec preferences page.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the import thread is running it is possible to:
1) click the [x] button of the "download dialog".
To prevent that, we attach a "delete-event" signal to no-op function.
2) to interact with the main window, once the "accept" event is triggered.
To prevent that, we make sure that the window is set back to "modal".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows, device names can end up being <drive-letter> (<drive-label>).
In such a case we are only interested in the <drive-letter> part, when
passing this value to libdivecomputer.
This patch provides a method to trim all text in parentheses and also
any leading and trailing whitespace.
An important addition is enabling back the user to enter a device
manually even it's absent in the combo box list. This device is
then stored and retrieved as the default device, but not stored
in the device list (dc_device_selector()).
As a side effect this change prevents the download dialog closing,
when a user-entered device is not one of the found devices via
subsurface_fill_device_list().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not sure this is the best naming scheme (General Settings / Tec Settings)
but it's a start.
The idea is to have the settings that a recreational diver might care
about on the first page, and all the other stuff on the second one. Let's
see how this works out long term. For now I moved OTU over and added
toggles for the different partial pressure graphs (only the pO2 one is
implemented so far).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to be unobtrusive, but add more information for people
who aren't satisfied with the numeric value we put inside the plot to mark
local peaks and troughs.
See ticket #9
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We try to identify devices that are connected and their matching device
names (and mount paths in the case of the Uemis Zurich). Those are
presented as a drop down menu to choose from. The user can still override
this by simply entering a different device / path name.
On Windows this is not functional. How do I find out which drive letter
corresponds to the USB device named "UEMISSDA"? Similarly we need code
that finds serial ports that are present. For now we once again default
to COM3 (so this isn't a step back, but of course it's far from what we
want).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one breaks with my preference to separate generated changes from
content changes - I wanted to get the new comment next to the
translator-credits text that I added to every .po file. This way the
people who worked on these translations at least get shown in the About
box. But a simple grep on the diff will show you that this is indeed the
only set of changes that I made.
git diff HEAD^ | grep ^+ | grep -v -e^+# -e^+++ -ePOT-Creation
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very common standard in desktop programs - if a menu entry
immediately causes an action (like Close or New or Toggle Autogroup) then
it doesn't have the "..."; others that open a secondary dialog (like Open
or Import / Download) are marked with "...".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a link to the GPL, a link to the homepage, an opportunity for the
translator to be listed (this requires the translations to translate the
phrase "translator-credits" with the names of the translators - kinda
nifty).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mainly affecting older Windows (such as XP), which do not have a more
fully featured unicode fonts installed, such as Arial Unicode MS.
With this patch we do a runtime check of the OS version in a couple of
places and if the OS is old, we use the asterix character and spaces instead
of the unicode star characters.
Linux and OSX should be unaffected by this change unless
subsurface_os_feature_available() returns FALSE for UTF8_FONT_WITH_STARS
at some point.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that at least for Norwegian the translations of the stock menu
entries was missing. This patch adds those as explicit strings and merges
those new strings into the .po files.
The translations need to be updated in separate commits.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just the first step - convert the string literals, try to catch
all the places where this isn't possible and the program needs to convert
string constants at runtime (those are the N_ macros).
Add a very rough first German localization so I can at least test what I
have done. Seriously, I have never used a localized OS, so I am certain
that I have many of the 'standard' translations wrong. Someone please take
over :-)
Major issues with this:
- right now it hardcodes the search path for the message catalog to be
./locale - that's of course bogus, but it works well while doing initial
testing. Once the tooling support is there we just should use the OS
default.
- even though de_DE defaults to ISO-8859-15 (or ISO-8859-1 - the internets
can't seem to agree) I went with UTF-8 as that is what Gtk appears to
want to use internally. ISO-8859-15 encoded .mo files create funny
looking artefacts instead of Umlaute.
- no support at all in the Makefile - I was hoping someone with more
experience in how to best set this up would contribute a good set of
Makefile rules - likely this will help fix the first issue in that it
will also install the .mo file(s) in the correct place(s)
For now simply run
msgfmt -c -o subsurface.mo deutsch.po
to create the subsurface.mo file and then move it to
./locale/de_DE.UTF-8/LC_MESSAGES/subsurface.mo
If you make changes to the sources and need to add new strings to be
translated, this is what seems to work (again, should be tooled through
the Makefile):
xgettext -o subsurface-new.pot -s -k_ -kN_ --add-comments="++GETTEXT" *.c
msgmerge -s -U po/deutsch.po subsurface-new.pot
If you do this PLEASE do one commit that just has the new msgid as
changes in line numbers create a TON of diff-noise. Do changes to
translations in a SEPARATE commit.
- no testing at all on Windows or Mac
It builds on Windows :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only files that are opened should be considered r/w. Files that are
imported should be treated as if they were r/o.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the menu and button images are a distribution choice - some
have them on, some have them off. I kinda like them and think that even on
OSs that have them off by default this doesn't look out of place (as other
apps clearly do the same).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Each time we retrieve a string configuration entry via
subsurface_get_conf(), all the multiplatform methods in linux.c,
macos.c, windows.c allocate memory for the returned value.
In gtk-gui.c, lets try to release the memory at:
default_dive_computer_vendor, default_dive_computer_product, divelist_font
before assigning a new address to these pointers.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Renamed to "Import XML File(s)", since we can import more than one file.
H
From 8f9b11d940d903316dcf4d023e327f365e4f4ccb Mon Sep 17 00:00:00 2001
From: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Date: Tue, 2 Oct 2012 11:38:56 +0200
Subject: [PATCH] Rename Import XML File menu entry
Renamed to "Import XML File(s)", since we can import more than one file.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When creating a new dive_trip from a dive, we should probably
always copy the location via strdup(). However we then have to take
care of the de-allocation in divelist.c:delete_trip()
and gtk-gui.c:file_close().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added new function dive_list_destroy() in divelist.c
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Looks like a GtkEntryCompletion object created with
gtk_entry_completion_new() should be unreferenced after usage
(e.g. post gtk_entry_set_completion())
In info.c:get_combo_box_entry_text(), moved the free(..) line outside,
so that we can free regardless.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The return value of subsurface_get_conf is a const void * - so we shouldn't
just assign it to a variable where we know it will be changed. Instead we
duplicate the string and free the original one. A little less efficient but
cleaner.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When updating the "You have usnaved change..." string I didn't pay
attention and missed the fact that we used it's hard coded length above to
allocate a large enough buffer.
Thanks you, Valgrind.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the same issue as 882cb159a4 (although now we
don't have "Import XML Files" within a dialog). It applies when
in the "Dive info" dialog.
There is some sort of a GTK bug on Ubuntu 12.04 with GTK 2.24.10 that
prevents us from using the gtk_window_set_accept_focus() and similar
API to make the window behind fully inactive.
The proposed portable solution is to completely disable the background
window (NOTE: unless its the main window), disabling child controls
(gtk_widget_set_sensitive) and making the top window "transient for" or
putting it on top (gtk_window_set_transient_for).
Still we do not want to hide the background window titlebar with
gtk_window_set_decorated(), which makes it still clickable.
Make this change to older code in gtk-gui.c as well.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Running under Valgrind showed a couple of silly bugs.
Worse, intentionally running into various error scenarios showed that we
could get the buffer handling in the raw parsing code to break down - we
would fail to process the correctly downloaded files.
To make it easier to get this right I restructured the code to collect the
XML buffer in a different way - this works much better and has stood up
well under testing so far.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of trying to figure out in the GUI code whether to call the
downloader again, the logic was moved into the downloader itself. It now
attempts to deal cleverly with running out of space on the dive computer
filesystem - and in return is able to process the maximum number of dives
(instead of just ten or so at a time).
Even on partial reads before a failure we are able to collect the data
that was completely transferred and report those dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This brings in the code to download dive information directly from a Uemis
Zurich dive computer.
The implementation contains a major hack that hooks the uemis code into
the same data structures used to setup libdivecomputer. This gives the
best result for the user, but is not something that I like as a long term
solution as it relies on internal libdivecomputer data structures.
This includes one major hack that uses a private data structure from
libdivecomputer to allow us to show the Uemis Zurich as one computer the
user can import from.
Once the user has chosen the Uemis we don't use libdivecomputer but our
own downloader. Just like in the libdicecomputer case this runs in its own
thread and updates the import dialog with progress information.
The code also keeps track of the last dive that has been downloaded from a
Uemis computer so we only import new dives on subsequent downloads. And
since the Uemis Zurich gives us its device id, we make this a "per
divecomputer" property for people who dive with multiple Uemis Zurich
computers.
This uses the debugfile infrastructure to allow easily collecting
debugging output - especially on Windows where by default console output
is lost.
Known limitations: when the Uemis runs out of space (it uses its
filesystem for communication with the host computer) we have no graceful
way to reset things. This is why the code doesn't try to download ALL
dives on the computer but instead download them in increments of ten
dives. This clearly needs to be addressed once I understand how to reset
the device.
The Cancel button of the import dialog isn't correctly hooked up, yet.
I still need to figure out how to gracefully shut down a download without
potentially hanging the device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
gtk-gui.c:about_dialog():
Before assigning a pixel buffer to "logo" check if "image"
has a GTK_IMAGE_PIXBUF storage type.
Prevents the following message if the icon file is missing:
Gtk-CRITICAL **: gtk_image_get_pixbuf: assertion
The message that the file is missing is still shown.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When calling gtk-gui.c:set_default_dive_computer_device(), first
free memory at default_dive_computer_device and then use strdup().
This fixed a case, where after selecting a device for the first time
in the "Download" dialog, then pressing "OK" followed by "Cancel"
(after a device error) the device text is garbled the next time the
dialog is opened.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Renamed the function pick_import_files() to import_files()
and added a declaration in "display-gtk.h". The declaration is "extern"
for consistency with download_dialog().
Since the new dialog is a real child off "main_window", we no longer need
some of the calls to gtk_widget_set_sensitive(), gtk_window_set_decorated()
to disable the parent, which previously was the old "Import" combined dialog.
Once the file list is retrieved, attempt to import each file and update
the list via report_dives().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Minor changes to file select box title
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Renamed "import_dialog" to "download_dialog" and also focused the download
dialog strictly on dive computer functionality. Removed the file button
and "filenames" checks from "download_dialog".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
New entries with icons and shortcut keys in the menus.
"Import XML File" is now using CTRL + I.
Reserve CTRL + E for "Export XML File" if possible.
"Download From Dive Computer" is using CTRL + D and
a GTK_STOCK_GO_DOWN icon.
Added separator below this entry in the "Log" menu.
Note: menu entry callbacks are NULL at this stage.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
There are possible bugs when targeting GTK 2.24.10.
When opening the "import XML files" file selector from the "import" dialog
on Ubuntu 12.04, even with gtk_window_set_accept_focus() setting FALSE
to the parent ("import"), it is still possible to click the title bar
and buttons, causing actions. This can trigger undefined behaviour -
e.g. opening multiple "import XML files" dialogs.
While on Windows the situation is more acceptable, on Ubuntu it is also
possible to click the [x] button on the title bar of the parent window,
which will close the parent dialog _with_ the current forward dialog.
Multiple proposed methods in the GTK documentation seem not to function
as expected, such as: gtk_window_set_modal() and gtk_window_set_accept_focus().
Passing the correct parent on dialog creation doesn't seems to help either.
The same problem occurs when selecting a default file from the preferences
dialog.
The proposed portable solution in this patch is to completely disable
the background windows by hiding the titlebar (gtk_window_set_decorated),
disabling child controls (gtk_widget_set_sensitive) and making the window
"transient for" or putting it on top (gtk_window_set_transient_for).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Renamed the XML button and titles slightly.
Generalized the dialog topmost text to "Choose what to import:".
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Thanks to Christian for running the static code analysis tool against
subsurface...
There were some false positives, a few style issues that I'll ignore for
now, and two actual potential bugs.
First: Don't check unsigned variables for < 0
This has been around for a while and we are lucky that while technically a
bug it still works as expected. Passing a negative idx simply turns it
into a very large unsigned integer which then fails the > dive_table.nr
test. So it still gets a NULL returned. A bug? Yes. Critical? No.
Mismatched allocation and free
This is an actual bug that potentially could cause issues. We allocate
memory with malloc and free it with g_free. Not good.
Reported-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Related to subsurface_default_filename() and g_path_get_basename().
Against 3835faa8fb.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently doubles the functionality of "Close" (file_close).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the GSList is now only created if the user enters the file selection
dialog, opening the import dialog and then clicking OK without selecting
either a dive computer or a file would cause a crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Renamed the title of the "Import" dialog to "Import", as there
are a couple of supported operations.
Removed the "Import:" text in the dialog body.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moved the entry bellow the standard file operations and above "Print".
Also placed it between separators and added the GTK_STOCK_GO_BACK icon.
Later on "Export" can be placed below "Import" using GTK_STOCK_GO_FORWARD.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By now the default file code seems quite matured, so in preparation for
2.0 we'll bring it back into master.
I made a few small clean-ups during the merge, but the merge itself is
very much straight forward.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This doesn't change functionality - it's just pointless to loop over a
list that is known to have only one element.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This logic seems to make much more sense - if the user hits 'OK' then the
old file is closed and the new one openened. Otherwise, leave things
unchanged.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Several potential problems.
- we could end up dereferencing exiting_filename when it was NULL
- we could free the default_filename by mistake -
subsurface_default_filename always needs to return a copy of it
- closing the existing file before opening a new one repopulated the
existing_filename with the default filename - preventing the opened
file to become the new existing filename
Also, make existing filename a const char * and make file_open have the
same sensible default folder behavior as the other file related functions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
One of the limitations of GtkFileChooserButton is that it only allows one
file to be chosen (so that it can display that file name in the button
after the file chooser dialog finishes). Since in the import dialog we
never want to show the button with the filename(s) filled in but want to
directly execute the import once files have been selected, I reimplemented
the button to simply open a multi file chooser when clicked and to then
run the import function if one or more file names were selected.
This does appear to require some more code but gets us a much more useful
and consistent implementation.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should make things more consistent, especially now that "Open"
actually does just that and no longer behaves almost like "Import".
The downside is that the import from a dive computer is now in the File
menu as well and no longer in the Log menu, where Linus originally had
moved it to in commit 3cace090989b.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a pretty significant semantic change - Open used to act more like
Import; you added more dives to the divelist. With this change it instead
acts more like the traditional File->Open in that it closes the previous
file, first.
The diff hides the minimalistic nature of the change - it seemed cleaner to
move the file_open function around than to do a forward declaration of
file_close.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to make sense since we have a pretty strong concept of the "active
file" that we are working on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The idea is based on Lubomir's code but the implementation is radically
different. Instead of having the preferences dialog be referenced by a
global variable we simply look up the appropriate ancestor of the current
widget.
Inspired-by: "Lubomir I. Ivanov" <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Always make sure to clear the memory allocated at the "existing_filename"
pointer when setting it to a new address or NULL.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Lifted these changes from a larger commit. The other changes I'll
reimplement in the next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) For safety reasons we no longer remove the default directory after
creating it. This prevents an access error (on windows) and also a couple
of small exploits that could have been possible, resulting in undefined
behaviour.
2) Once "default_filename" is allocated keep it until the value has to change.
The value is finaly released once the program is ready to close.
3) When picking a new default file, grab the new string directly from the
GSList.
4) When storing the new default file from the preferences dialog, make sure
we also update "existing_filename" if needed.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Fixed some whitespace issues, made commit message and one of the comments
in the code somewhat clearer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As usual, things work slightly different on Mac. Quartz delivers some (but not
all) accelerator notifications differently. Command-Q and Subsurface->Quit now
work on Mac as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replaced g_list_free_full with the inlined alternave:
g_list_foreach(dive_trip_list, (GFunc)free, NULL);
g_list_free(dive_trip_list);
once again my version on debian 6.0.x has libraries up-to-date yet outdated.
i guess i have to suggest against API which has the "Since <some ver>"
text and <some ver> is fairly recent on documentation webpages.
Signed-off-by: "Lubomir I. Ivanov" <neolit123@gmail.com>
I took only one hunk from the patch that Lubomir sent - the rest I
implemented differently in the previous commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelist.c:
Replaced "gtk_tree_path_get_indices_with_depth()" with the coupled alternative:
int depth = gtk_tree_path_get_depth(path);
int *indices = gtk_tree_path_get_indices(path);
for compatibility GTK+ < 2.22
*:
Replaced all usage of "cairo_rectangle_int_t" with "cairo_rectangle_t"
for compatibility with Cairo < 1.10.
Both modification make building Subsurface possible on a fairly recent Debian
distribution, which reports to have the version of the abovementioned
libraries "up-to-date", yet they are slightly outdated.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Display yearly statistics in a statistics window with option to expand
the viewing on monthly level. The amount of dives along with basic
information like duration, depth, water temperature and air consumption
is displayed in yearly and monthly level. Thus you are able to compare
e.g. development of air consumption or diving activity from year to
year.
Using already existing macro for splitting seconds into minutes:seconds.
Moving repetitive code to a function (couldn't think of the suggested
clever macro, but this should pretty much do the trick).
Now the statistics are updated every time the process_all_dives function
is called. It might make sense to actually verify the structures need to
be re-allocated, but such optimization is currently not implemented.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Combined two commits.
Minor cleanups for white space and boolean values.
Significant changes to use the correct units for volumes vs. depths and to
avoid unneccesary lookups of the model storage based on the tree.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tests have shown that the most multi-platform way to do printing with GTK is
to use GTK_UNIT_INCH (or GTK_UNIT_MM) with GtkPrintOperation. Tested on
Linux, OSX, Windows.
However this requires the appropriate scaling for Pango and Cairo to be done,
with separate plotting logic for printing and drawing on the screen. To achieve
that, profile.c:plot() now accepts a scaling parameter from type
"scale_mode_t" defined in "display.h".
Also due to new scale, small decimal numbers (such as 6.12345) cannot be well
stored in "cairo_rectangle_int_t" therefore it is replaced with
"cairo_rectangle_t", which uses doubles to provide Cairo with a drawing
area.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Minor whitespace cleanup.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I forgot to give the user execute permission on the folder that subsurface
might create to store the datafile in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we always picked the last file that was openend as the file
name to save to. That seems counterintuitive when importing files or when
opening multiple files. Especially if Subsurface was executed without a
file on the command line and we are using the default file.
Now we only remember a file name if it was the first one to ever be
openend or if it was used in save-as.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The default file name is OS specific and tries to follow the customs on
each of the OSs. It can be configured through the preferences dialog.
On MacOS we get a strange warning which appears to be a well documented
Gtk bug on MacOS.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may not be the path the import files are in, but it's better than the
current default of 'nothing'.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we move to Linus' tri-state variable we need to separate those two
items, anyway. But for now this fixes the obvious bug.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the ability to auto create trips from the menu. It's a toggle
entry (and while at it, we made the zoom toggle a toggle entry as well).
We can therfore switch back and forth between auto generated trips.
There is one bug. Assume you have no trips. You manually create a trip
from some dives out of a group of trips that autogen would turn into a
trip. Now you turn on autogen and this trip gets expanded with all the
dives that would normally be grouped together. If you turn off autogen
again, all those dives are still part of the remaining (initially manually
created) trip. Working around this issue seemed a lot more work than the
likelihood of anyone running into it seemed worth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Merge freediving tweaks (zoom in on short dives etc) from Maximilian
Güntner.
Trivial conflicts in display.h due to unrelated printing stuff just
happening to be added nearby.
* 'freediving-tweaks' of git://github.com/mguentner/subsurface:
moved zoomed_plot to display.h
plot the time with a fixed padding (leading zero)
updated/corrected comment
added "Zoom" button and improved scaling
fixed indentation
use increments that make sense for 600 seconds
Plot shorter (apnea) dives with a reasonable scale
Pull a few buglet fixes from Mikko Rasa.
Some trivial conflicts due to changes in the dive selection logic, and
using the new "for_each_dive()" helper.
* git://git.tdb.fi/ext/subsurface:
Check if multi-dive editing is actually needed
Fix an off-by-one error in buffer allocation
Merge the initial 'track trips explicitly' code from Dirk Hohndel.
Fix up trivial conflicts in save-xml.c due to the new 'is_attribute'
flag.
* 'trips' of git://git.hohndel.org/subsurface:
Fix an issue with trips that have dives from multiple input files
Some simple test dives for the trips code
First cut of explicit trip tracking
This code establishes the explicit trip data structures and loads and
saves them in the XML data. No attempts are made to edit / modify the
trips, yet.
Loading XML files without trip data creates the trips based on timing as
before. Saving out the same, unmodified data will create 'trip' entries in
the XML file with a 'number' that reflects the number of dives in that
trip. The trip tag also stores the beginning time of the first dive in the
trip and the location of the trip (which we display in the summary entries
in the UI).
The logic allows for dives that aren't part of a dive trip. All other
dives simply belong to the "previous" dive trip - i.e. the dive trip with
the latest start time that is earlier or equal to the start time of this
dive.
This logic significantly simplifies the tracking of trips compared to
other approaches that I have tried.
The automatic grouping into trips now is an option that defaults to off
(as it makes changes to the XML file - and people who don't want this
feature shouldn't have trips added to their XML files that they then need
to manually remove).
For now you have to select this option, then exit the program and start it
again. Still to do is to trigger the trip generation at run time.
We also need a way to mark dives as not part of trips and to allow options
to combine trips, split trips, edit trip location data, etc.
The code has only had some limited testing when opening multiple files.
The code is known to fail if a location name contains unquoted special
characters like an "'".
This commit also fixes a visual inconsistency in the preferences dialog
where the font selector button didn't have a frame around it that told you
what this option was about.
Inspired-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit fd2debc1e730 ("replaced stdndup() with the inlined equivalent")
Lubomir freed the memory from one of my two strdups but not the other.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous commit was a patch from Lubomir, which also had some
whitespace fixes (to go with some new whitespace bugs to replace them)
in it.
I removed the whitespace changes from that patch (don't mix whitespace
fixes with other fixes, unless they are on the same lines!) but decided
to look for other whitespace issues, and this is the result.
I left the non-C files alone, some of the spec and script files also
have whitespace at the end of lines etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
don't kill the OS incompatibility messenger.
1)
http://stackoverflow.com/questions/6062822/whats-wrong-with-strndup
stdndup() is POSIX 2008, but apparently not available on OSX and Windows
it could be made potentially application global (e.g. a local "stdndup.h")
2)
free() memory at pointer "current_dir", once we are done.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The existing code set the filename to the full path of the last input file
and didn't set the path at all. Instead we now split the existing filename
into its path and file component and set up the choser accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus change in commit bcb9f67819bc ("Make the notebook portion (dive
notes/equipment/info) a scrollable window") created a really ugly default where
the notebook Dive Notes always ended up with a vertical scrollbar. This picks a
much saner default layout for the panes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes things start up with the wrong size, which is somewhat
annoying, but by doing so avoids a bigger annoyance, namely that the
three panes move around when moving between dives.
In particular, if the initial dive didn't have much of an equipment
list, the initial size allocated for the notebook is fairly small and
determined mainly by the size of the the Dive Notes page. However, when
you then scroll around in the dive list, you might hit a dive with lots
of equipment, and suddenly the panes dividing the different parts of the
subsurface application window will jump around to make room.
That's horribly annoying, and actually makes things like double-clicking
dives in the dive list not work right, because the first click will
select it, and cause the dive to move around (so the second click will
hit a totally different dive).
Now, making the notebook be in a scrollable window means that if the
size of the notebook changes, it might get a scrollbar, but the panes
themselves do not move around.
The initial sizing of that thing being wrong is annoying, though. We
need to figure out a separate solution to that.
[ Side note: currently it uses GTK_POLICY_NEVER for the horizontal
scroll-bar, just to avoid the horizontal size also starting out wrong,
which is *really* nasty. If we can solve the initial size issue, we
should make the horizontal scroll-bar be GTK_POLICY_AUTOMATIC too. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "filename" variable was only initialized when the user accepted the
name, so cancelling the file save would randomly use an uninitialized
pointer.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull miscellaneous fixes, mostly UI stuff from Mikko Rasa.
Both this and the pull from Pierre-Yves Chibon created a "Save As" menu
entry and logic. As a result, there were a fair number of conflicts,
but I tried to make the end result somewhat reasonable. I might have
missed some semantic conflict, though.
Series-acked-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
* 'misc-fixes' of git://github.com/DataBeaver/subsurface:
Add a separate "Save as" entry to the menu
Changes to menu icons
Improved depth info for dives without samples
Divide the panes evenly in view_three
Add a "Save As" entry in the "File" menu allowing the user to specify the file in which to save
the data. This is useful as we no longer offer this option through the "Save" entry while the data
had been opened from an existing file.
Signed-off-by: Pierre-Yves Chibon
So far, when trying to quit while the data was changed the offer
was "Save" or "Don't save". Now, you can also "Cancel" which will
bring you back to the main window.
This allows you to re-save the data in another file.
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
When a file is opened, we keep it in memory and when you try to
quit while the data has been changed, propose to save back to
this same file.
Signed-off-by: Pierre-Yves Chibon <pingou@pingoured.fr>
Instead of having "Show Temp", "Show Cyl", etc in the Preferences dialog,
rename the group as "Show Columns" and remove "Show " from all the
checkboxes. The dialog is tighter/nicer this way.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Pull dive-trip grouping from Dirk Hohndel:
"This turned into an updated pull request for the tree2 branch where I
implemented the date based grouping - but is actually a very different
topic: this adds the ability to edit multiple dives (and fixes some
issues with the dive editing overall). The reason for that is that it
reuses some of the infrastructure that I implemented in the tree2
branch for tracking the selected dives. More details in the commit
messages."
* 'tree2' of git://git.hohndel.org/subsurface:
Switch from date based to dive trip based grouping
Redo dive editing
Fix selecting and unselecting summary items
Apply sort functions to the correct model, don't select summary entries
Maintain selected rows when switching between list model and tree model
Create duplicate list model so sorting by columns works again
Improve tree model implementation
Allow date based grouping
This commit addresses two issues:
We now can add / edit / delete equipment from the edit dive dialog
We now can edit multiple dives at once
The latter feature has some interesting design constraints:
It picks the 'selected_dive' as the one to start the edit from - so if
this dive already has some information filled in, that information needs
to be overwritten before it is stored in all of the dives. Similarly, only
changes to the cylinders or weightsystems are recorded. Also, the notes
field is not editable in the multi dive edit mode (as that didn't seem
useful).
The workflow seems to work best if using the multi-edit right after
importing new dives from a dive computer. The user then can select all the
new dives and only needs to edit things like location, divemaster, buddy,
weights, etc. once.
This commit will create some obvious conflicts with the commit that adds
exposure protection tracking. It was implemented on top of the tree_view
changes as it reuses some of the infrastructure for tracking the selected
dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For simplicity and shortness, throughout subsurface exposure protection is
simply referred to as "suit".
Add the fields to the data structures, add the column to the dive_list
and the preferences dialog (once again with it being turned invisible by
default). Support loading and saving of the suit information.
Display the suit information in the Dive Info pane (this may be a bit
controversial as people could argue this should be in the Equipment pane)
and allow editing of the suit info, with our usual support for completion
and drop down lists to pick from.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the total weight carried on the dive in different weight systems
to the divelist. The column is by default not shown, which can be changed
in the preferences. The column is sortable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "Save" entry will now automatically save over the last used file. If
no filename has been set, then that entry will also prompt the user for a
filename.
The filename is set when saving as well, so the next save will use the
same filename.
Signed-off-by: Mikko Rasa <tdb@tdb.fi>
It's customary for menu bars to not have icons.
Some items were lacking icons when there's perfectly good stock icons
available. I was a bit torn between the "new" and "add" icons for the
"add dive" item, since what it really does is create a new dive, but
the "add" icon is an uninteresting sheet of paper in the default icon
theme so I decided to use the "add" icon.
Signed-off-by: Mikko Rasa <tdb@tdb.fi>
No need for right-clicks. It's inconvenient on lots of laptops etc, so
allow just using the Dive menu as an alternative.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This does mean that you have to build subsurface against a new version
of libdivecomputer, and that version is likely going to have various
slightly incompatible changes. But the new interfaces allow for easily
adding new supported dive computers without subsurface having to be
updated for each new vendor and model, so some slight pain is definitely
worth it this time.
I'm not even going to try to have some backwards-compatible version
here, the libdivecomputer interface changes are so extensive. Native
enumeration of devices is just the smallest part of it: the constants
and types that libdivecomputer uses now have much nicer names that all
start with DC_ or dc_, so you don't get the kinds of name clashes we had
with "gasmix_t" etc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It should be possible to have a certain limit where we
stop zooming so that short dives are visible as such
at first glance. Therefore a "Zoom" button has been
added to the "Log" menu along with a shortcut (Ctrl + "0").
The user can now zoom/unzoom the plot and is still able to
quickly distinguish short dives from normal ones when
browsing the log.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
It is really annoying to have to type the device name each time you need
to import a dive from your computer, if you are not using the default
device name. This will save the device name in the configuration file and
matches the logic currently used to save the dive computer name in the
configuration file.
Signed-off-by: Terrance Stanfield <t@hollowcranium.com>
Instead of using printf() to print the string updates ("Parsing sample
data" etc), introduce a function to show those strings in the graphical
progress bar itself.
Subsurface hasn't been a text-mode application in a long time ;)
This partially fixes the second todo entry from commit b0ba22a068
("Show dive import error messages in the import dialog") and generally
makes for a more helpful import - at least for the largely error-free
cases.
Sadly, the messages that really come from within libdivecomputer itself
(like "suunto_vyper2.c:193: Failed to receive the answer.") when things
go really wrong are not caught. libdivecomputer does have a notion of a
logfile (set with "message_set_logfile()"), but that ends up being
really inconvenient.
Maybe we could use some pipe setup or something. Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was a todo item in commit b0ba22a068 ("Show dive import error
messages in the import dialog") which made the import dialog able to
retry the import on errors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sure, you can import a file too, but it really makes more sense to have
the actions related to importing new logs under "Log", I think. I don't
think of it as a file operation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. not in the main window. And leave the import dialog open, so that
you can either try doing it again, or cancel. This makes it much easier
to re-try a failed dive import, and actually makes the failure more
obvious too.
Todo:
- make the "Ok" button change to "Retry" when an error happens
- try to see if we can catch the actual status update messages from
libdivecomputer and show them too in the import dialog. Right now
they are printed out to stderr by the library.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Always having to re-select the same dive computer got really annoying
when I had trouble importing the dives. Let's not force the user to do
that, since we could just remember the last dive computer used, and
default to that one.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Linux and MacOS the subsurface_close_conf() doesn't really close the
config file (it flushes writes on MacOS), but on Windows it does
actually close the registry hkey.
Which is bad, if you change the settings multiple times - we assume that
the config file is open the whole time.
So add a "subsurface_flush_conf()" function, and call *that* when
changing configuration parameters. And call the close function only at
the very end.
Alternatively, maybe we should just open the config file separately
every time. I don't much care, maybe somebody else does.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull weight management from Dirk Hohndel:
"This is the fifth or sixth version of this code, I'm begining to lose
track. I still struggle with the balance between code duplication and
unnecessary indirectness and complexity. Maybe I'm just not finding
the right level of abstraction. Maybe I'm just trying too hard.
The code here is reasonably well tested. Works for me :-)
It can import DivingLog xml files with weight systems and correctly
parses those. It obviously can read and write weight systems in its
own file format. It adds a KG/lbs unit default (and correctly stores
that).
The thing I still worry about is the code in equipment.c. You'll see
that I tried to abstract things in a way that weight systems and
cylinders share quite a bit of code - but there's more very similar
code that isn't shared as my attempts to do so turned into ugly and
hard to read code. It always felt like trying to write C++ in C..."
* 'weight' of git://subsurface.hohndel.org/subsurface:
Add weight system tracking
Fix up some trivial conflicts due to various renaming of globals and
simplification in function interfaces.
- supports multiple weight systems per dive
- supports multiple weight system types
- supports import of weight as tracked by DivingLog
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If at least 2 dives are selected, show statistics of these dives on
Overall Stats. Otherwise, show the statistics of all dives. Temperature
is also added to the shown statistics.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Minor change to avoid adding statistics.h (moved the global variable and
external function declaration to display-gtk.h).
Another minor change to the text displayed for the "Stats" notebook page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We're going to eventually import non-xml files too, so let's begin
splitting the logic up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have local variables or function arguments with the same names as
function static variables (or in one case, function arguments).
While all the current code was correct, it could potentially cause
confusion when chasing bugs or reviewing patches. This should make things
clearer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the About and Preferences menu item to the App menu.
Switch the accelerator key to be Meta (i.e., Command) instead of Control
This required a bit of restructuring of the code, but it's all for a good
cause.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To do this a few things needed to move into the os specific files, but the
overall change is fairly small and the difference on the Mac is amazing.
Subsurface now becomes a Mac app with Mac toolbar and useful default
fonts.
Changed the CFBundleIdentifier to be the reverse DNS of the subsurface
site (sadly, 'torvalds' is not yet a TLD).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we hard coded /dev/ttyUSB0 - which is a good starting point in
Linux but not so useful on Windows or MacOS. This was now moved into one
of our OS helper functions with (somewhat) reasonable defaults.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the options are "Save" and "Cancel". I wrote that code and it
always bugged me - "Cancel" could mean that I want to cancel the the whole
operation, i.e. that I don't want to quit after all. Showing "Save" and
"No" seems much more logical.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They were never intended to be sortable, but using common code with the
dive list picked up that "sort by index" thing by mistake.
If we really want to be able to sort cylinders by O2 percentage (which
really doesn't seem to make much sense, considering that you usually
have just one or two cylinders) we will need to also handle the case of
editing the (differently sorted) cylinder table. Which we don't do now.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested by Henrik Aronsen, and seems much more natural. Especially
with lots of keyboards having function keys oddly mapped.
Suggested-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently just tied to F1-F4 (for divelist, profile, info, and "all
three" respectively), which is just crazy. But using "ctrl-P" for
"Profile" isn't sane either, that's the standard printer keyboard
shortcut. So what would be good keyboard shortcuts for these things?
I also wonder how I can get gtk to shut up about the fact that a pane
becomes too small for the contents of that pane? We very much want to do
that, and it's very intentional. Gtk does the right thing apart from
the whining (and apart from the visually ugly part of a widget that
doesn't fit, but making it pretty doesn't really seem possible).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The profile colors were defined all over the place, so I put them all in one spot. I'm unsure if this is the best solution to that problem, but I guess it's a step in the right direction.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
It doesn't make sense with the new three-pane layout, and I don't think
we're reviving it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds tested code for Linux and Mac OS, implementing the api that
Linus suggested.
The Windows code was moved into its own file, but hasn't even been compile
tested, yet.
In order to have just one interface to set or get a preference value we
encode TRUE as (void *) 1 and FALSE as NULL. This works consistently on
all platforms and regardless of whether we have 32 or 64 bit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not happy with it, but it looks good and works better than the
alternatives I've looked at so far.
So why not happy? It's not configurable, and gtk really doesn't do a
great job with the case of notebook widgets that are shrunk to be
smaller than the contents (the cut-off gets ugly, and is outside the
notebook page!)
But committing as a way to keep track of this, and let Dirk use it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus noted an odd "CRITICAL" warning when ripping off a page of the
notebook and then dropping it within the same notebook.
Turns out we need to simply accept a drop on ourselves and gtk does the
rest correctly.
I also fixed the fact that we incorrectly declared the callback as 'void'.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'add-info-stats-page' of git://github.com/dirkhh/subsurface:
Add Info & Stats page to the notebook
Even more places with pressure and volume conversions
Further cleanup of pressure and volume conversions
Use unit functions to get column headers, add unit function for pressure
More consistency improvements
Add new helper function to get temperature and unit
This provides the relevant information for the currently selected dive
plus a bunch of statistics over all dives in the dive_table.
The visual design has lots of room for improvement
- right now the different fields change size
- it might be nice to have a more modern look for the entries
- the O2/He field is odd - for most divers the He value will
always be 0, so maybe we should only show He if there's at least one
dive that uses He? Also, we simply do a comma separated list of gases
for all the tanks used
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's what gtk_init() does with gtk-specific arguments. IOW, if you do
things like
subsurface --g-fatal-warnings dives.xml
to get a real abort on gtk warnings, gtk_init needs to be able to
actually change argc/argv.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provides compatibility with winxp-32bit in gtk-gui.c,
since RegGetValue is only available on the 64bit build of the OS.
Fixed whitespace issues, fixed obvious typo (this patch clearly wasn't
even compile tested)
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this we are able to include both a separate .ico file that the
program can load at runtime and a .res file (that is created from the .rc
file, both in the packaging/windows directory) that is linked into the
executable and makes the Windows Explorer show the correct icon for
subsurface.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No change at all to non-Windows builds.
Everything seems to work with preferences - but only tested on Win7
Remaining issue: displaying an icon (or the logo in the About dialog)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far this just removes the gconf code - so no preferences for Windows.
It also removes the unsused gconf references in main.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a table with four rows of toggle events and resize it as needed.
This may not create the most beautiful layout, but it works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now they are displayed in one hbox which doesn't work if you have
many events - but the code itself works and correctly toggles the events
on and off.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not being careful enough doing copy and paste and then making manual
changes... this inconsistency caused subsurface to always store the
opposite of what you wanted in the preferences for SAC and O2%.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out I used the wrong function to keep the size of notebook pages
that were ripped off. Using gtk_widget_set_size_request on the new
notebook creates a hard minimum size for this window.
Instead we should use gtk_window_set_default_size on the new window that
is the parent of the notebook. This has the desired effect of creating the
new window with the same size as the one the page was ripped off from -
without making that the minimum size for this window.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
From a usecase point of view - if we call with multiple file names then
most likely it's
subsurface MyDives.xml new_dive1.xml new_dive2.xml
and therefore the existing "database" is the first filename, not the last
one (as the current implementation assumes).
Frankly, this is a bit arbitrary - but this one seems to make more sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to set a fixed size instead of just copying the size that the
existing notebook has - which didn't really feel right when resizing and
then ripping of a page.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm trying to get subsurface to get closer to becoming a "regular desktop
application"; so far this is based on the recommendations and guidelines
on OpenSUSE and Fedora.
The icon is now named subsurface.svg and make install installs it in the
correct location. At runtime subsurface first checks if an icon is
installed and if it is it uses that - otherwise it falls back to the old
code that tries to read the svg file from the current directory.
We also install a subsurface.desktop file
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove casts from/to void*. They are unneeded in C, can hide problems
in the future, and are far too C++ish. Furthermore, they were
inconsistent with the rest of the code and even with regards to
themselves (at least in terms of whether or not to have space after the
cast).
In this case, we temporarily lose const specifiers in libdivecomputer.c
due to the unneeded cast, so it seems better to avoid the cast at all,
so you get warned about a const->non-const cast if you ever change it to
do something like this.
The casts in gtk-gui.c are just useless semantically, although they
might be useful as a hint to the reader that the void pointers are char
arrays.
Signed-off-by: Julian Andres Klode <jak@jak-linux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we choose a file in the import dialog then this should imply clicking
OK in that dialog - no reason for a two step process.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's a gtk limitation.
So you have to import XML files one at a time. If this is too big of a
restriction then we need to redesign the import dialog.
Sgned-off-by: Dirk Hohndel <dirk@hohndel.org>
Open (or adding a file name on the command line) means that this is just
one of the files that you consider part of your dive history. So dives
don't get automagically numbered and the dive_list is not considered
"changed" just because another file was opened.
Import (or adding a file on the command line after --import) means that
you are importing the content of this file to your dive history. So if the
imported file has un-numbered dives that are newer than everything else,
those get correctly renumbered. And importing marks the dive_list as
changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If renumbering a list of dives, default the start number to the existing
first dive number. That way, if you do need to renumber (overlapping
import or whatever), but your at least had your really old dives already
numbered, we start off with a sane default.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the callers were always calling report_dives first, followed by
dive_list_update_dives(). And there really was no reason to have the
callers call two separate functions for the "I've added new dives" case.
So just call dive_list_update_dives() directly from report_dives(), and
remove it from the callers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We draw a little red triangle (of hardcoded size - not sure if this SHOULD
scale with the size of the plot... I like it better if it doesn't) to the
left of an event.
We then maintain an array of rectangles that each circumscribe one of
those event triangles and if the mouse pointer enters one of these
rectangles then we display (after a short delay) a tooltip with the event
text.
Manually creating these rectangles, maintaining the coordinate offset,
checking if we are inside one of these rectangles and then showing a
tooltip... this all seems like there should be gtk functions to do this by
default... but if there are then I failed to find them. So instead I
manually implemented the necessary logic.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we passed in width and height and the routine itself decided to
keep 5% margin around each edge - oddly doing this with double precision,
even though this is all integer coordinates.
Instead we are now passing in a drawing_area. We are kind of abusing the
cairo_rectangle_int_t data type here - but it seemed silly to redefine a
new data type for this.
Width and height give the size of the TOTAL drawing area (as before).
x and y give the offset from the edges - so the EFFECTIVE drawing area is
width-2x and height-2y
This is in preparation for adding tooltips - those need to know the
coordinate offsets from the edges - so having this hard coded inside the
plot function didn't make sense anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'uemis-integration' of git://github.com/dirkhh/subsurface:
Remove the ability to 'Import' .SDA files
Integrate loading of uemis SDA files into the regular xml parsing
First steps towards integrating SDA files into the default XML loading
We can instead 'Open' these files as they are just bastardized XML files.
This gets us back to a more consistent point where 'Import' gets data
directly from the dive computer (and hopefully soon we will add the
ability to load a dive directly from a uemis SDA to libdivecomputer),
and 'Open' loads a file from the filesystem of the computer we are
running on (this last sentence phrased so awkwardly as the uemis Zurich
SDA is a computer and presents a file system when connected via USB - it
just doesn't have the dive data in an accessible format in that file
system).
As a bonus we get to throw away quite a bit of code (the uemis specific
file handling, mini-XML parser with helper functions, the file open dialog
in the importer). Yay!
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to do this just for the dive list, but the new cylinder view
will want to do a lot of the same boilerplate gtk stuff, so make it a
bit more generic and move it to gtk-gui.c.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disable the secondary notebooks that are created when ripping off a page
(dive_list or dive_profile) as drop targets for other pages.
Also fix the incorrect arguments for the drag callback function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So we go back to the old interfaces to identify the notebook as part of
one group - the one that was just recently deprecated
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used the wrong signal - "data-drag-received" is intended to check
whether the target will accept the drop. What we want is the "drag-drop"
signal which tells the widget that something was dropped on it.
Also fix an embarrassing lack of NULL pointer checks in my string
comparisons...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus had used some deprecated interfcase and didn't correctly untangle
the new window that he created (hiding it the window... very nifty).
I think I'm closer to the real solution with a data structure that keeps
track of the components of the new top level window that I need to be able
to untangle (and eventually, destroy) at the end.
The one error I also can't seem to get rid of is the
Clean up the drag and drop code and allow ripping of the Dive Profile
Gtk-CRITICAL **: IA__gtk_selection_data_set: assertion `length <= 0' failed
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is somewhat hacky, and there is clearly something I still don't
understand about gtk selections and drag-n-drop. Dropping it back
works, but I get a nasty error when I do it:
(subsurface:8512): Gtk-CRITICAL **: IA__gtk_selection_data_set: assertion `length <= 0' failed
even though I actually never set any selection at all directly. So
there must be some internal gtk rule that I am violating, but I can't
see what it is.
I probably shouldn't commit it with a known ugly wart like that, but I
really have no clue. Maybe somebody else can figure out what is up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That also makes it always stay in front of the other window, which is
just annoying. I only did it because I wanted to make sure it dies when
the main window does, but since we just kill the main loop when closing
either window, that just isn't an issue.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'otu-tracking-v2' of git://github.com/dirkhh/subsurface:
Store options in gconf
Add preference option to chose if SAC and/or OTU should be in divelist
Fix up trivial conflicts in gtk-gui.c (cleanup in gtk dialog wrt
gtk_dialog_get_content_area() having introduced a new 'vbox' widget)
While it's not the most elegant way to do this I opted to store the
options with "inverted polarity" - i.e., the options that are supposed to
default to "True" are stored inverted since gconf reports an unset option
(first time the user runs the program) as "False".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I've been wondering how to make 'subsurface' work better on a small
screen (I used to travel with a crappy netbook - I may have upgraded my
laptop since, but it is still a design goal of mine to make sure it all
works fine in that kind of environment).
And ever since the dive list was made much wider and moved below the
notebook, it's annoyed me how much room it all takes if I want to have
both a reasonable plot window and several dives visible at the same
time.
The solution seems to be to just make the dive list be a notebook page.
That makes the default layout very dense.
At the same time, when you have the pixels, it's horrible, because you
would want to see the dive list and move between dives while at the same
time also seeing the dive profile change. But that is solvable by
simply making the dive list notebook page be detachable, so if you have
a nice big screen, just detach the dive list page and now you have
independent windows for the dive list and the dive info.
NOTE! I don't have any way to re-attach the dang thing. I think I'd
need to learn about drag-and-drop targets etc. So once you've detached
the dive list, it stays detached.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not quite the same format as for the kernel, but I want to do the normal
"edit the makefile before making a release" model that I'm used to.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ok, so some file chooser widget with a popup dialog would have been more
professional, but I'm lazy. Plus I suspect the popup would look
horrible when populated with /dev entries, and I don't think there is
any sane filter function.
So this works, and means that you don't *have* to recompile the whole
program just because you have your dive computer on something else than
a USB serial line.
I suspect I should save the default name as a config variable too.
Maybe a setting in the preferences dialog.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'll add a widget to allow the user to select the device too, so let's
name things to make them more obvious.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
My home directory is a mess. Don't show all the crap, just the stuff
that might be relevant.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's really just about the logo, but whatever. Dirk tells me I need one
of these in order to call it 1.0. And I'm not going to fall into the
trap of thinking that 1.0 needs to be something polished, it just needs
to be working well enough..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As reported by Mauro Dreissig, the progress bar doesn't work and causes
a SIGSEGV due to a missing allocation. The code broke when Dirk
separated out the GUI from the core code, and I hadn't tried
divecomputer downloads since.
Reported-by: Mauro Dreissig <mukadr@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By using the delete-event callback instead of the destroy callback we are
able to display our dialog (and the file-save dialog) while the program
window is still being displayed. Much nicer this way.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As the application shuts down we do one more check to see if the dive that
is currently being displayed has been modified (we previously just checked
as we switch dives)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Track whether things changed in the global dive_list
So far this actually works if changing dive info (but only if dive
selected was changed after the dive info was changed).
We are not tracking changes to the cylinder information, yet.
also remove the duplicate static dive_list
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
