A small typo broke the disabling of the graphs for the
newly added curves. ( btw, we need a designer to display
the graphs in a better way, just too much information. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model accepts check / unchedk. Now, I need to also
plug the result of the check / uncheck to the list model.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the mainwindow reads the settings and sets up things -
except that this has already happened in the constructor of the static
PreferencesDialog. So only keep those parts that aren't handled there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connects the YearlyStatistics model with the YearlyStatisticsWidget
nothing is shown right now, mostly because I need to do everything
but now it's easyer to add the things that are missing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the old statistics panel at the botton of the new one to have
a reference view of the statistics while programming the new one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have a very sad way of controlling the statistics,
now we will create the model when there's a need for it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using QToolBar I was able to remove much of the dead code
from the mainwindow.ui xml file by transforming the QToolButtons
into actions and loading them dynamically in the .cpp code.
I couldn't use the designer for this ( as I wanted ) because
Qt has no notion of ToolBars outside of the areas where the
MainWindow should have one, and we use it in a very different
area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out that the fix in commit f7119bdccf ("Planner: make sure no old
handles are around when entering Add/Plan") was incorrect. We ONLY want to
remove the existing handlers when we re-plan a dive, NOT when we call add
or plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. The modifications to the selection cause a redraw of the
profile. So we need to make sure that we leave the plan state and return
to profile state BEFORE we do this, otherwise we'll call into
createTemporaryPlan() with invalid data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While planning we might have made changes to the displayed_dive. So we
need to make sure that the profile is redrawn after we cancel a plan (or a
re-plan).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing this, all waypoints of the calculated ascent are now waypoints
in the plan - so the user has to remove the ascent part of the dive in
order to really replan the dive. That's a pain, but we don't keep the data
around that would tell us which waypoints are user input and which ones
were calculated.
Fixes#527
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same logic as we do for newly added dives.
As a side effect this patch appears to fix the issues with getting the
newly planned dive selected.
Fixes#692
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should correctly set all the values and puts us in edit mode.
Testing so far looks good for both single dive and multiple dives selected
(i.e., you can paste into multiple dives).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create a dialog for reading and writing settings to and
from dive computers, with a menu entry in MainWindow to
open the dialog.
I will build up on this dialog and change it as needed.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Some of the toolbox icons will trigger a recalculation of the dive,
triggering then a replot, that will copy the dive to the displayed_dive
again, but in the case of a edit this would discard the edition (
that would still be shown on the UI ) leaving the dive in an
unconsistent state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the problem I pointed out im my comment to #667 and hopefully also
the original problem although I cannot confirm since i cannot reproduce the
problem in the first place.
See #677
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt internally always uses / as directory separator. #651 shows that in the recent
files menu, under windows we can have double entries with both versions of the
separator. This patch should normalize the menu entires to use the native separator
(i.e. \ on Windows). (Untested due to lack of Windows computer).
See #651
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use const-reference where we can gain a bit of speed from that
and clear an else { if {}} by using else if.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our core structures are kept consistent by calling delete_single_dive()
and there is no reason at all to even touch the UI selection as this all
goes away with cleanUpEmpty()
Fixes#660
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we had a trip selected, we ignored that and simply called
the DiveAdd functions, but the mainTab code that deal with selections
to show one or more dives or trips asked how many trips were selected
to the DiveList, and since a trip was selected things go kabum.
Fixes#606
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile was still the planner one, so we need to force
a replot.
Fixes#621
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not use MainWindow::instance() inside of a non-static
mainWindow method, that's just bogus.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the code that saves and restores the dive planner
settings.
Fixes#608
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The filter menu wasn't connected to anything other than a debug print.
This removes that menu.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code hoocks the pictures with the preferences change.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The export dialog was being created but never free'd.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new macro hides all 5 lines of code from the old code to just one,
since we already have 15 buttons and more are comming, and *every*
code is just the same, it's a logical change that will make us reduce
now 75 lines of code to just 15, in the future this can be bigger.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the toggle picture button and hoocks
it up with the rest of the code. I'v also changed a call
from ProfileWidget because it caused errors on the ui
generated code, where it would try to call an still-to-be
instantiated object.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was way too complicated because we used to edit a "live" dive that
was on the dive list. All we really need to do is systematically make
sure that all the widgets are in the correct state.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recreate the helper function (which now does something fairly different)
to share the common code between the two modes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had tested this mostly with add dive and completely forgot to track the
same changes in the planning routine. Oops.
This allowed to get rid of a no longer useful helper as well.
Fixes#594
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets rid of the stagingDive and stops the constant adding and
removing of dives from the divelist (that was an INSANE design,
seriously).
When adding or planning a dive all work is now done in the dedicated
displayed_dive.
Add dive mostly works - when the user clicks save the dive is added to the
dive list and selected.
Plan dive is mostly untested. It passed trivial "start planner, save"
testing so it's not entirely broken, but I'm sure there's more work to be
done there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing in a divenr of -1 to make it clear things this changes
things to use an options "clear" flag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No longer use the dive structure that is passed in but instead always use
the displayed_dive to display things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have a concept of what to do when plotting multiple dives, so
let's not pretend and remove all the messing around with lists.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A little bit of CI: Print our logo on the print out dive plan.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is almost a rewrite of the Search function on the WebView
the old code had a few uneeded things, mostly being a subclass
of QMainWindow instead of the QWebView - this makes the code
use a tiny bit less ram.
The SearchBox was also moved to an own class ( we can use it
later to filter the contents of the DiveList for instance )
and a forced use of the pixmaps for the Mac and Windows platform
was added.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since not all platforms support theme icons, we need to pack
them into resources and fallback to that resource theme.
There seems to be a bug in Qt
(https://bugreports.qt-project.org/browse/QTBUG-16697), thus
default theme name (hicolor) does not work. So we test for
'window-close' theme icon on startup and if not found, set theme
name to 'subsurface'
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one-liner re-adds the possibility to edit manually added dives.
Tested because I didn't belived that it was going to be so easy, but it
seems that it was.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The planner used the selected dive on the dive list, and
when there's a filtering in action it can be in a state where
there's no dive selected.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- application level proxy is reconfigured on settings saving
- tested with direct connection (no proxy), local proxy without auth
(tinyproxy) and SOCKS (ssh -D dynamic port forwarding)
- not sure about QNetworkProxy reuse between invocations
- consider using QNetworkProxyFactory (but since no plain TCP
connections are used, QNetworkProxy seems to be good choice)
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is my first attempt at grouping UI elements of the planner in a
sensible way.
It might still be sensible to combine the two bottom panes into one.
In addition there is a new field "altutude" which is sychronized with the
surface pressure as for planning we often know the altitude of the dive
site rather than the atmospheric pressure.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 6699e3ab ("Add print button to planner") unconditional printing
code was added. This puts that same code behind NO_PRINTING macro.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 708f19830e ("Planner: New plannerSettingsWidget") the Globe
widget handling changed, and this updates the NO_MARBLE build option to
work after that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The idea is that a week after the user starts using Subsurface we ask them
if they would like to submit a survey response.
If you are running a development build, don't wait seven days.
This patch doesn't do anything with the user's selections, doesn't submit
anything to our server, etc. It's just a placeholder to tune what we
should ask, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In planner mode, this replaces the globe with the dive plan and introduces
a new plannerSettingsWidget in the diveListPane. All new fields are still
disfunctional. This is WIP.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"warning: suggest parentheses around assignment used
as truth value [-Wparentheses]"
I think 4.8.2 is confused about this one, but we suppress
it regardless by separating into two assignments.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And make sure it gets called whenever it needs to get called - it was
missing from the openRecentFile case.
Fixes#530
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is kind of a random cut off, but if plotting the dive takes more than
a second and TTS/NDL is on, we force it off. Because the algorithm for
that is fundamentally quadratic in nature it can take a VERY long time -
getting users to think something is broken.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems odd to have different behavior depending on whether the window
manager tells us that the user wants to close the window or whether the
user hits quit or ctrl-q.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small changes in the model to display the pictures of the dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call that method from the mainWindow when the dive changes.
The updateDivePictures walks around the events of the first dc (since all
pictures are distributed allong all dive computers) to get the events of
type '123' (I wonder if there's not a better way to save pictures on the
dive, like an linked list of char* named pictures.)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching to / from plan mode, we switch to show either the dive plan
detail widget, or the dive list widget.
So far this widget does nothing. This just makes sure it's there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moved the connections between DivePlannerPointsModel and
MainWindow from inside the Planner class to the MainWindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there was no current dive we didn't set up any cylinder at all which
was a bit awkward as we use AIR but have no cylinder corresponding to it,
which breaks assumptions elsewhere.
Instead we use either the default cylinder or make one up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Duh. We had to reload the list (and make sure the internal data structures
are recreated as well) before restoring the selection.
I also switched to simply accessing the widget directly, instead of via
the dive_list() call.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is still something seriously wrong here.
For now let's just not restore the selection and at least this prevents us
from crashing. But I still don't understand why it crashes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
for some reason the next selected dive is NULL after cancelling the
plan. I'm investigating.
This patch fixes the show of the empty profile and it also untangles
some parts of the code, keeping the mainwindow where it should belong
: the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This only partially works. If I start from an empty dive list, plan a
dive, then abort, there are still leftovers in the profile widget.
Hitting Ctrl-W clears that out. But it just runs the same cleanUpEmpty()
again...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On an empty dive list we would remember the new dive (which gets
auto-selected since it's the only dive) and then crash when we try to
restore that selection after cancel (in which case that new dive is gone).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were making things way too hard (and were doing things that don't need
doing, like clearing the DivePlanPointModel).
Currently we still crash after manually adding a dive or when canceling
a plan.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Tomaz suggested, I don't need to pass the information whether we are on
the planner into the function - it's part of the DivePlannerPointsModel
and therefore already knows.
Also, we want to make sure we actually use the gas that's in the first
cylidner of the staging dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still crashes when you abort the plan.
And when you accept the plan, the profile stays stuck in PLAN mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code had no chance of every working - on so many levels.
First unselect all dives, then extract data from a selected dive?
Set up the cylinder data (which didn't work), and then clear the data
again?
What the heck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On the cleanup dirk forgot to set the plan tipe to PLAN instead of ADD
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow to both create the full default dive or ownly the descent and bottom
part (so the planner can deal with the ascent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is working in the wrong way, mostly because I'm setting the
plannermodel to ADD state ( and the planner graphic to the
correct PLAN state ), but I don't know why - when on PLAN state
on the model, things just don't work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function should likely to move to C in the future, I'm only
adding this here because I'm changing this file so much ( already
4 rewrites of the function )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The disableDcShortcuts is called inside of the ProfileGraphics
( I actually think that this method should be moved to there )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This correctly enables the planner on the new profile,
but it doesn't triggers the correct paint on the canvas.
[Dirk Hohndel: remove other remnants of the disabled planner as well]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code removed was already ported to the New Profile.
We managed to clean quite a bit. huhhy
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But it doesn't move the handlers yet, and when you confirm it you also
must click on the dive to select it or the profile will show garbage.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a signal to MainTab, that should be removed from there
when we finish the rework on the edit part, to go to the edit classes,
but in the meantime, let's keep it there.
The signal is connected to the ProfileWidget in a way that the end of the
edit will also trigger the profile to go back to ProfileState (show the
dive, if there's any) or empty Profile (if there's none).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is highly broken in many ways - but it's the right first step.
I ported two of the most important methods from the old profile and now if
you are in add dive mode, double clicking on the new profile will
correctly add a handler on the planned dive. To see and move the handler
around, however, you need to activate the old planner.
Next step: add the handlers on the new profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the ability to close the exporting window, also Quit Subsurface with
this window in front, for consistency.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As our menus are getting many export entries, it is better to create a
single export dialog where user is able to select the export type and
whether to export selected dives or all of them. This should also be
more intuitive than the current way when export from file menu export
all dives and right click menu on divelist exports only selected dives.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No attempt is made to ensure that what the user does is sane. So this can
result in duplicate numbers, non-consecutive numbers, non-monotonous
numbers, whatever floats the users boat.
You can renumber a single dive or all selected dives (with a starting
number given that is applied to the oldest selected dive and then for each
newer selected dive that number is incremented by one).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we successfully download dives, the old selection should be cleared and
the one of the newly downloaded dives should be selected. I decided to
pick the last dive downloaded, which for most dive computers (but for
example not for the Uemis SDA) will be the first or earliest of the dives.
That seems much more intuitive than keeping the previous selection around.
Of course this is harder than it should be because of the way we track
selections and because we need a consistent dive list model in order to
change the selection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may sound counterintuitive but it actually makes sense.
If you have a default filename that's the name of you "normal working
file". If you want "Save as" something, that by definition is NOT your
normal working file but a subset or an experiment or something. And you
most definitely do NOT want to overwrite your default file with that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C specs says that we can safelly free a NULL pointer, so there's no reason
to check if it's null before freeing it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way, the user can save dives containing sets of "standard cylinders". Selecting one of those prepopulates the gas list for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon pressing Ctrl-Q or the window close button a modal dialog was shown
to remind the user that the planned dive is not saved. This patch
triggers the "cancel plan" action before trying to quit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simplify the API (we'll take advantage of this in the next commit).
We always center the globe on the current dive, so no point in passing
that dive in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an item to File menu to export all dives in CSV format.
Naturally this includes also the code to perform the export.
Fixes#434
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When exporting UDDF logs the file name selection dialog should talk
about export, not save. This patch changes that text
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to quit Subsurface with a Ctrl-Q shortcut even if the yearly
statistics window is active.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables closing the yearly statistics window with esc or ctrl+w
keys.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This marks a lot of todo's where I think there's core stuff being mangled
on the interface - we should remove this from the interface to make
testing and maintenability easier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
-Renaming prefs members for consistency.
-Changing references of QSettings to the prefs structure instead.
-Removing unused functions in pref.h were left over from an old version.
-Changing the data-type of bool members to short for consistency with other members.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The include path is set up correctly so we don't need these explicit paths
in includes.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds new push button "HR" to the button bar on the dive profile to
toggle display of heart rate.
TODO: New icon for the heart rate button is needed.
Fixes#485
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The removal of the planner menu entry was erroneously commented out.
Other parts of the code rely on ENABLE_PLANNER to know if the planner is
enabled or not so rely on it here to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of unconditionally creating the object at program start let's
create it the first time we need it. That should avoid adding more and
more delays at program start (not to mention the usually unnecessary
memory use).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a check for updates feature.
It connects to http://subsurface.hohndel.org/updatecheck.html to check for
any new versions. It then prompts the user with a download link if an
update is available.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the world map exporter.
- add worldmap-save.c that writes the html to the file
- use Google maps v3 API to put the place marks on the map
- add worldmap-options.h to contain some settings for the JS which will
make it easier for those to be changed
- add save HTML action in the mainwindow user interface
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our usermanual is based on webkit, and thats not supported in Qt for
Android. We should probably replace it with a Android native webview
somehow.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some users have requested a way to build subsurface without marble.
This hides all traces in the ui and creates a GlobeGPS-dummy thats
just a QLabel saying that marble is disabled, in case its shown
somehow. The dummy is there so we can just ignore the fact that marble
is disabled in the rest of the code.
Fixes#394
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't care about system default fonts and sizes, we just used the Qt
default font.
Due to how QFont is constructed, there was need to split font and font
size.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the git object save logic also check out the changes in the
working tree and index if the branch we save to is checked out. It used
to be that we would just update the object store (and the branch ref, of
course), but leave any checked-out state untouched.
Note that if the working directory is dirty (ie you have made changes by
hand and not committed them), the checkout will skip any dirty files and
report it as a warning to the user. However, the save still succeeds
(since the _real_ save goes to the backing store).
NOTE NOTE NOTE! Both loading and saving very fundamentally work on the
git object store level, and if you are working with a checked-out branch
and make modifications to the working tree, saving will not touch those
dirty files (so that you can try to recover your edits manually in the
working tree), but it's worth pointing out that subsufrace loading state
will totally ignore the working tree.
So the only way to make subsurface *see* your changes is to commit them.
Having edited state checked out in the working tree will only confuse
you when subsurface first ignores it on reading, and then refuses to
touch the checked-out state on writing.
Put another way: working with a checked-out branch is now _possible_,
but you need to be aware of the limitations.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The selection logic was a bit random: some places would return NULL if
the dive computer index was out of range, others would return the
primary dive computer, and actually moving between dive computers would
just blindly increment and decrement the number.
This always selects the primary computer if the index is out of bounds,
and makes sure we stay in bound when switching beteen dive computers
(but switching between dives can then turn an in-bound number into an
out-of-bounds one)
Fixes#464
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the error string just be an internal "membuffer", which the
GUI can fetch and show when errors occur. The error string keeps
accumulating until somebody retrieves it with "get_error_string()".
This should make any write errors actually show up to the user.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This at least avoids marking the dive list as unchanged on a failed
write, and propagates the error further up the stack.
We still don't show the error string in the GUI, though. I'll start
doing that next, I think.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes subsurface remember the git source commit of the dive data.
If you save to an existing branch, subsurface will now complain and
refuse to save if you try to save if the existing branch is not related
to the original source. That would destroy the history of the dive
data, which in turn would make it impossible to do sane merging of the
data.
If you save to a new branch, it will see if the previous parent commit
is known in the repository you are saving to, and will save parenthood
information if so. Otherwise it will save it as a new parentless commit
("root commit" in git parlance).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit tricky because we are using a plain widget for
a window and don't have a class for it (req. more source files).
Also for the table model to update we need to create a new
YearlyStatisticsModel instance each time. At least, in that regard
we can re-create the model each time refreshDisplay() is called.
This patch adds a couple of private variables that are used
to manage the memory of the yearly statistics model and window
and also close that same window on MainWindow::closeEvent().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The animation appeared when the user started subsurface with a default
file, wich was a little annoying since it didn't had a 'from' position
to go and it was also increasing it's size on some window managers
that do subtle windows animations when a program starts. This patch
treats the first dive opened when the program loads with a divelog pa
rameter differently as the following ones storing the velocity value
on a temporary, and reassigning it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once the poster is displayed when there are no dives in the list,
we may also want to disable the QToolButtons (PO2, SAC, etc..),
until a new dive is loaded and the profile is redrawn.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is useful if we have more non-modal windows and we want
them simply to close with the main one without explicitly
creating class member variables to point to such instances.
A practical example would be the debug window created in
ProfileWidget2() (diveDepthTableView) which holds
the depth profile values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch partially removes the code for the old profile from
Subsurface. It removes the use of the old profile on the mainwindow,
but keeping the code in the tree for now.
A bit of code-cleanup also entered this commit because I had to change
every instance of the code that used the old profile.
Now to the real code-cleanup
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Minor change to the perl postprocessing script and resulting changes to
the affected source files.
This deals with two issues:
- "foreach"-like structures were not always treated correctly
- some longer calculations that ended on "+ constant" were reformatted in
a rather unatractive manner
In one source file (divelist.c) I ended up adding braces to the sources...
trying to cascade the indentation further down without having the block
there seemed a lot more trouble than it's worth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code just set the button-"status" based on what we stored on
the settings. This sets the corresponding value in our prefs-struct.
This fixes the same issue as in 63f7f3, without the side effect of
magically hiding the mean depth line.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 63f7f37e46.
For odd reasons this appears to make the mean depth line disappear. This
will require some further analysis, but for now I'll just revert it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch will remove all files that fail to parse from the recent
files menu.
Signed-off-by: Joshua Wambua <joshua@megvel.me.ke>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed so the underlaying struct preferences prefs, will be
updated when we set the buttons to there previous state after we
loaded the settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the 'Zoomed Plot' a preference that can be stored and
retrieved, this way if the user sets the plot to be 'zoomed', this
information will persist even if they closed or opened subsurface again.
Also, added the 'Scale' button on the new profile, but didn't did the glue
code yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First attempt to use the tools on one of our source files.
So far so good. Not perfect, but a HUGE improvement.
Most importantly it effortlessly fixed the Allman style braces introduced
in commit 51220f26ef ("Add recent files to main menu.").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add(up to four) recent files to File main menu.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch does a few things:
1 - reset the model when user closes the dive file
2 - connects the 'rowsAboutToBeRemoved' in a way that the graphics can
remove their polygons too
3 - adds a 'clear' virtual method so items that don't follow the rules can
clean themseves up.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow subsurface to show the dive planner in case a compile flag is given.
qmake CONFIG+=planner
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing variable members to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Main change is that now SubsurfaceAbout doesn't have instance object, but
it constructs and destructs dynamically.
* Remove the static SubsurfaceAbout::instance() class member
* construct/destruct about dialog on demand
* Other small aboutbox cleanups.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
ACK-ed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Populate the status of the profile tool box as soon as the program
starts.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have now a mix of old / new prefs, remember
to change both when we alter something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had a few very strange bugs regarding to preferences (like clicking on
apply twice so things worked), because the code that moved from
"QSettings" to 'Internal Settings Struct' was being triggered on the
mainwindow, *after* the settingsChanged signal was emmited. This should
fix the problem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For quick acess of preferences the show / hide stuff from the Settings
dialog is now in that toolbox and in the future we can put a few more,
like 'Show Notifications Panel' and 'Enable Legend'
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug in the old implementation where we needed to
trigger a repaint of the profile almost everywhere. this isn't
needed anymore on the new one, so do not use the same method
that will be killed when I finish this.e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds a QTableView if built in debug mode. This is very userful
to understand the Profile that will be drawn by the graphics classes and
fix the possible errors.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This call just passes the selected dive to the new profile widget. No
drawing is performed, I still have to setup the constructors and the rest
of the initialization of the new Profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch enables main window full screen mode by menu toggle or pressing
F11.
[Dirk Hohndel: whitespace cleanup]
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers will always download all tanks that they store, not
just the ones used in a dive. Most people only want to see the tanks that
they actually used during the dive (and for the others there's an option
to go back to the old behavior, just in case).
All this is only in memory / during runtime. If the dive computer provided
the extra data we will not throw it away.
Fixes#373
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not need any import dialog when importing normal XML based
divelogs. With this they are imported directly after file selection
dialog. However, when CSV files are detected in the import list, the
configuration dialog is displayed and applied for them. (CSV files are
detected by file extension.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changing the import stuff to DiveLogImport. Now we should have one
import function/dialog for importing divelogs instead of multiple menu
entries.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And make them use UTF-8 on Windows instead of the local 8 bit encoding.
This will also get us the proper NFD encoding on OS X.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We may want to use toUtf8() for win32 considerations.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were asking the widget.font() which returned the font that the
QFontSelector uses to display it's contents, instead of using
currentFont() that's the correctly selected font. duh. :))
Fixes#368Fixes#375
(for #375 the solution is to select a different font that a) looks better
and b) has the missing characters)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is not the ideal solution. Ideally we might want to simply enter the
profile edit mode if we edit a dive that was manually added. But right now
the code contains lots of assumptions about being in one mode or the other
and as we are redoing the profile / planner classes for 4.1 anyway, I'd
rather err on the safe side for 4.0.1
Fixes#374
(well, it fixes the second bug reported in 374 which is quite different
from the original bug)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user edits a dive and then quits we try to ask them to finish
editing, first. If the user did this by either clicking the little 'x'
in the window decoration or by hitting Alt-F4 (or similar), we didn't
have that question (only the 'save changes' question in case the dive list
had already been modified.
Fixes#374
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is so we can default to the GF's from the preferences. We need the
bail handler in createTemporaryPlan, because its triggered when we
change GF's, and if we don't have a stagingDive there, we will access a
NULL-pointer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
