There may be other paths where we potentially show the wrong status to
the user... but at least with this it times out eventually; there
shouldn't be any single operation that isn't broken down with progress
markers that takes more than 10 seconds, so keeping the notification
around for 30 seconds seems very conservative.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you show the App log and then start "Add dive manually" or "Show GPS
fixes" you get this odd behavior that the page stack returns to the App
log for some reason. A simple workaround is of course to return to the
dive list, first. Not ideal (because there shouldn't be a reason not to
have the All log in the stack as well, but not really a big problem,
either, since the App log is mainly intended for developers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This merge was a bit more challenging given how far things had diverged,
but I hope I got it mostly right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Can't believe I didn't notice them earlier... I must have stared at these
strings countless times.
Reported-by: Scott Ireland <scott@sdj.ca>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We received suggestions from users to darken the text color in the dive
list a bit and this does seem to be a lot more readable. Especially since
people are likely to use this outdoors the higher contrast seems
reasonable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user tapped on the "Cloud credentials" menu and wants to go back to the
dive list (by selecting that option from the menu), allow them to do so if they
previously had valid credentials.
This allows them to go back to the dive list even on a device without a back
button like an iOS device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is so obvious... and I know others asked for this before. Should
definitely have been in the first version...
Fixes#1026
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we shouldn't have a drawer or other changes to the UI prevent the
user from seeing / interacting with the notification.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of having the notification disappear after five seconds, keep it
visible until we are done accessing the cloud. That seems to be more
intuitive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
first quick and dirty port of the imports to Kirigami 1.0
(using system installed for now) adapt to api changes and
try out some of the proposed ui changes from the HIG
Signed-off-by: Marco Martin <notmart@gmail.com>
don't create a local PassiveNotification copy,
use the global show/hidePassiveNotification from
ApplicationWindow, now that it works
Signed-off-by: Marco Martin <notmart@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And hide the notification either after 5 seconds or once we are done.
This requires an extension to the Kirigami components that isn't upstream,
yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First cylinder only, show warning if there are more than one cylinder defined.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the integration of the credentials into the start page the logic for
this has changed.
Since the code for start page and dive list is actually on the same page,
using opacity to switch between the two sub pages (depending on whether we
have valid credentials and dives to show), the old way of changing
credentials no longer worked.
With theis patch the user once again can change their credentials (and
change their mind and go back to the dive list).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It now explains the relationship between Subsurface-mobile and the desktop
application and allows the user to enter the cloud credentials right
there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't pretty, but having the version string available on a place
that people are likely to find does make sense when going public with
the Subsurface-mobile. Especially when we do a public release, I assume
the developer menu with App log might not be readily available for
people to identify their installed version.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First cylinder only, show warning if there are more than one cylinder defined.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we currently only have preferences that affect the GPS
functionality, it might be more logical to have the preferences under
GPS menu.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding a dive is just like editing it, except that canceling the operation
has different consequences. Instead of trying to figure this out by some
inference on other state, let's just make it explicit and then clean up
after ourselves if the user canceled a manual dive add.
This also switches to use the properties that we defined in order for the
main menu to be able to setup these values. Makes the code easier to read
and is more consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of passing magic values around, calculate the columnWidth as part
of the SubsurfaceTheme object.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I guess the Dive list item will be accessed more often
than the preferences item, so put it to to. Also remove
the "back to" prefix.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If one browses the application more than one step (e.g. details, gps fix
list and preferences), we need to pop the stack a bit more to get back
to the dive list. This will clear the whole stackView as I saw no harm
in discarding the history when one jumps back to the dive list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pressing of buttons were difficult to see mainly due to small buttons
and small color distance between pressed and un-pressed state. This fix
enlarges the buttons a little, and choses a different color for
the pressed state.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As asked for on the mailinglisrt, a menu item is added to return
to the Divelist the easy way. In addition to the standard Android
back button.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit f3f7930 introduced a more attractive button style to the start page.
This patch turns it into its own type so it can easily be used everywhere.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on post by Ben Laud
https://medium.com/@benlaud/complete-guide-to-make-a-splash-screen-for-your-qml-android-application-567ca3bc70af
It creates a theme that uses a splash drawable that Android will show
immediately when the application is launched. And then starts the QML
application with visibility set to false adn only makes it visible (and replace
the splash screen) once initialization is finished.
We still get a little flicker with the switch from splash to start page to dive
list, but over all the experience is hugely improved. And the bug that the
splash screen stays around when starting Subsurface-mobile in landscape also
appears to be fixed.
Fixes#994
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch reworks the navigation of the dive details.
- The detailsview is now a list view with page-sized delegates. This
allows horizontal swiping to the next and previous dive.
- The central button now allows to open the edit mode for the dive.
Original patch was done by Marco Martin, but needed to be reapplied by
hand.
Signed-off-by: Sebastian Kügler <sebas@kde.org>
This had been broken by mistake in commit e5f95daee8 ("QML UI: reimplement
context menu for dive details").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
