Dives for the seac action computer are imported by the seacsync
program into two tables in an sqlite3 database.
The dive information is read from the headers_dive table.
The dive_data table is then queried for each dive to get samples.
The seac action computer is the only current supported computer
by the seacsync program. It only supports two gas mixes, so the
parser will toggle between two cylinders whenever it detects a
change in the active O2 mix.
Dive start time is stored in UTC with a timezone offset.
A helper function to read this was added to qthelper.
Default cases have been added to some switch statements
to assist in future development for other dive types and
salinity.
Example database has been added to ./dives/TestDiveSeacSync.db
Signed-off-by: James Wobser <james.wobser@gmail.com>
We do _not_ read them back, since they are calculated values, although I
guess we could aim to do that too at some point in case we have an
import from somewhere else that has these values but not the profile (or
gas use) to actually calculate them.
Fix test-cases that are checked by TestParse (but nothing else) to match.
Requested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There was a TestProfile but that was a stub that did not test anything.
We have an export function that serialises the profile data
(including lots of derived data like deco information and
cylinder pressure interpolation). So here is now a simple
tests that can detect regressions in the profle.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
It makes no sense to keep the device nodes if all the other data
is cleared. Let's do this automatically and not explicitly.
This ensures that the function is also called on mobile.
Currently it was only called on desktop.
Weirdly, the parser-tests were expecting that the device nodes
were not reset by clear_dive_file_data() and therefore divecomputers
were accumulating in the test results. Thus, the additional
computers had to be removed from the expected test results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Corrected typos in three files:
dives/Test.csv
dives/TestComma.csv
dives/APDLogViewer.csv
Simply replaced the word celcius with celsius.
Signed-off-by: Jason Bramwell <jb2cool@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The handling of dive site merging changed and therefore the tests
have to be adapted.
1) Dive sites are recognized as identical based on their name.
Therefore, give the dive sites that should be merged the same name.
2) The dive site id of the first imported dive is kept. Thus,
merge and reverse merge produce two different output files.
Create a second file reflecting that fact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using a random UUID, use an SHA1 hash of name, description
and notes (if defined). This is necessary for testing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a subtle bug introduced in 5c4569247a which
unified two functions finding the gasmix at a given time
during the dive. There was a slight difference, though:
Does a gaschange exactly at that time count or not? For
the planner to work, the answer has to be in the affirmative.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
As we now parse dives without profile, we get 2 more dives from the
sample log import (3 in total). And naturally also the resulting XML to
compare against needs to be updated.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
The code incorrectly divided the temperature by 10 as an integer,
causing unnecessary precision loss due to truncation.
Fix it, and update the test results for the now improved temperature
import.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that we used to get additional tts=0:00min tags on Seabear
parsing. I would assume these to be incorrect as there other values
right before these that look more sensible. Also the resent change to
streamline the feature of not storing repeating values causes the test
to fail. Anyway, just grabbing the new result to compare with as it
seems sensible.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Add one more picture to the already existing test.
This new picture is a JPEG and has data after JFIF EOI tag.
Suggested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Not using lrint(f) when converting double/float to int
creates rounding errors.
This error was detected by TestParse::testParseDM4 failure
on Windows. It was creating rounding inconsistencies
on Linux too, see change in TestDiveDM4.xml.
Enable -Wfloat-conversion for gcc version greater than 4.9.0
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
We do some merging in a couple of the other tests as well, but the idea
is to have specific test cases that exercise our merge logic.
This one starts simple. Merge a dive with some valid info with a second
one that has less data filled. And then try it in both possible orders.
It shows a few potential problems.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to work around the crazy QDateTime::fromTime_t() problem in Qt.
It is *very* lightly tested. In fact, the only test is that "test0.xml"
change that is part of this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the example divelog shipped with Subgear products (OEMs for
Scubapro/Uwatec), just changed the name to be meaningful for the reader
of the dives directory.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With commit b26e516e2a ("Dive_sites-Notes shouldn't be stored as
attribute") our output format changed slightly. Adjust the expected output
to match that change to ensure that TestParse passes again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This file contains imported dives from Seabear H3 and T1 dive computers.
It is used for validating Seaber import from new file format.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are test dives for Seabear H3 and T1 dive computers received from
Seabear Diving Technology.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes trips, dives outside trips, deco, gas changes, dives with
multiple dive computers, a really short dive, a rather long dive, a dive
with pictures, dive computers with very coarse sample rate, rather fine
sample rate, with gas integration, without...
Should touch a lot of different scenarios.
The file is in V2 format to also allow testing the importing / conversion
to dive sites.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also fixed it to correctly parse the mean depth (duh, a test that had a
bug) and added a buddy field for good measure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds two test dives for OSTCTools.
I've kept the original naming.
Num 173 selected because it implies using EAN32.
Num 80, provided in forum by Philippe Tescari, selected because involves
gas changes (although user don't seems to have set different gas mixes).
Sadly, both dives seems to be from 2N/C devices.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When loading an image by filename and by hash fails, try to interpret
the filename as URL and download the image.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With no V2 question shown
- parsing fails when a V2 file is loaded
- parsing succeeds when a V3 file is loaded
- import of CSV file succeeds
With V2 question shown
- parsing succeeds when a V2 file is loaded
Finally compare the output of reading in the various files with reference
output included in the sources.
My guess is that this test might be a bit fragile, but hey, it's a start.
(reminder: the tests only get built when using cmake)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
