The cylinder model is used both in the planner and the
equipment tab. We have three preferences for the pO2 that
is used to compute MOD: In the planner, there is one for
the bottom part of the dive and another one for deco.
Those are set in the planenr UI. There is another value,
controlled in the Tec Prefernces. That one should be
used in the equipment tab rather than the one from
the planner.
Fixes#2984
Signed-off-by: Robert C. Helling <helling@atdotde.de>
If the dive timestamp changes, the dive could move in the dive list. But the
current dive actually doesn't change (it's still the same dive, right?). Yet
we need to update the dive list as well as the shown dive (especially if this
is after adding a dive, which is first inserted with the current time and then
updated with whatever the user enters).
Fixes: #2971
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When an undo command selected invisible dives, a current dive outside
of the list of selected dives was chosen. This could have the very
unfortunate effect that the current dive was set, though not selected.
From an UI point of view this meant that the dive was displayed, but
edits would not be registered.
Change the setClosestCurrentDive function to select the current dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At some time, when introducing the global reset signal the filter
stopped being reloaded when loading a new log. This leads to very
strange UI behavior: dives disappear when editing fields unrelated
to the filter.
Therefore, when reloading the model, reset the filter. One might
argue whether this is the correct place. On the other hand, we
might even make the filter a sub-object of the dive-list model.
Let's think about this.
Partially solves #2961
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
ExifTools (and probably other meta-data editors) modifies the
mvhd creation date, but leaves the individual creation dates
in the tracks unchanged. Therefore, use the mvhd atom.
Reported-by: Eric Tanguy <erictanguy2@orange.fr>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing from other software, it happens that weights are imported
without their type. When the user changes the type, the imported weight
is overwritten, which is not exactly a friendly behavior.
On the other hand, when changing the type after creation of a weight
entry, it is preferrable to set a default weight. This is convenient
for people who commonly use the same weight.
As a compromise, set the default weight only if it was unset. We
recognize this by a weight value of 0 g.
Fixes#2938
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
User request: when entering a cylinder type, do a substring
search. For example, when entering "100" also find "AL100".
Currently, a starts-with search was used.
This is simply done by setting the "filterMode" of the
ComboBoxDelegate to "Qt::MatchContains".
Suggested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives for the seac action computer are imported by the seacsync
program into two tables in an sqlite3 database.
The dive information is read from the headers_dive table.
The dive_data table is then queried for each dive to get samples.
The seac action computer is the only current supported computer
by the seacsync program. It only supports two gas mixes, so the
parser will toggle between two cylinders whenever it detects a
change in the active O2 mix.
Dive start time is stored in UTC with a timezone offset.
A helper function to read this was added to qthelper.
Default cases have been added to some switch statements
to assist in future development for other dive types and
salinity.
Example database has been added to ./dives/TestDiveSeacSync.db
Signed-off-by: James Wobser <james.wobser@gmail.com>
The way we export the profile image (as direct export but
also used for printing) is that we render the profile
from the screen to a Pixmap and save that to a file. Unfortunately
this results in very bad resultion and a blurred image.
This is an attempt to improve that situation but it's still far
from perfect: Rather than a QPixmap and grab, I now use a QImage
(where I can set the size) and render, and indeed the picture resolution
(when vied at fixed size) get's better this way. The disadvantage
is that icons get smaller at the same rate und so
there is a natural limit on how big we can get. Maybe somebody
with better Qt knowledge can take off from here. In my opinion
this is already a step in the right direction.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the dive has no explicity salinity, our conversion
between pressure and depth assumed salt water. Make this
explicity by using the corresponding macro.
When the planner starts and no salinity is set explicity,
set the water type chooser to salt water to reflect
our default assumption.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This new option allows a user to select a new destination tank for an
existing "Gas Change" event. This is useful when Subsurface's heuristics
get tanks wrong after an import from a divecomputer. The use-case arose
from sidemount divers with air-integrated transmitters as well as carrying
a deco tank.
Signed-off-by: Michael Werle <micha@michaelwerle.com>
When setting up a dive for replanning, we ignored zero length segments as those
tend to be generated by gas changes. But it is possible to enter those in the
planner and the replanning should not ignore those. So be
more clever about gas changes. Let's add 10 seconds so we are not at two depths
at the same time and help since add_stop also does not like zero length
segments (it thinks we are trying to replace a waypoint).
Fixes#2901
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
0249e12 split up the dive import logic in multiple steps. Thereby,
the one of the conditions for renumbering the imported dives (is
the last old dive numbered) got messed up: The first number of the
new dive was compared to the total number of old dives, which makes
no sense.
- Simply check for the number of the last existing dive (if any).
- Don't remember the number of old dives - the original table is
not modified anyway.
Fixes#2731
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A while ago, we introduced a preference whether O2 should
be considered narcotic. We used this when computing
best mix or when entering the He content via MND. But
we forgot to make the displayed MND depend on this
preference. This patch add this.
Fixes#2895
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We did something really horribly wrong when merging cylinders. It's
been broken since commit 7c9f46a ("Core: remove MAX_CYLINDERS
restriction"), and used some really strange logic.
This rewrites the logic to be (I think) a bit more easy to understand.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last time those changed, we forgot to update serial_ftdi. In that change
set_latency had been removed from libdivecomputer and poll and ioctl had been
added. This caused the callbacks to no longer be aligned correctly and the
functions were called with the wrong arguments through the wrong function
pointers, leading to crashes.
Instead of the fragile assumptions about order and type of function pointers,
use named initializers. And while we are at it, fix that for the bluetooth
implementation as well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having a lot of tags (or more precisely, a tags string that is very long) could
cause the width of the dive details view to extend past the width of the the
page. The txtTags label was missing a maximum width, and to make the result
more useful, I also added correct wrapping and elide to the mix (stupidly, we
had the wrap and width for the fixed name of the field ('Tags'), but not for
the user determined content of that field).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI is ugly, and of course this is hidden in the developer options that have
to first be enabled in the advanced settings. As I mentioned in the previous
commit, I believe the actual risk that something gets damaged here is very low,
but still, explaining this so it makes sense to the casual user may be a bit...
difficult.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a partial revert of commit 99438121c4 ("mobile/dive-edit: use template
components and theme colors")
Clearly the information given in the Qt documentation on how to theme ComboBox
is flat out broken. The trade-off between 'better dark theme' and 'broken user
experience' is fairly easy to make.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I could have sworn that I have fixed this several times in various places,
but apparently (as shown by todays support emails) it's still possible to
setup a mixed case email address. So let's try to solve this problem at
the very top.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The salinity value was not displayed with localized thousands separators.
E.g. to a user of a German locale the density read as slightly over
1 g/l, when it should be approximately 1000 g/l. For consistency, also
localize that value.
Also localize the CNS and OTU numbers, even though these should
(hopefully!) never come with thousands separators.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was more painful than expected, because we get the "preferences"
changed signal too early when the user switches to system format.
The correct format is set by the preferences-widget, not the preferences
subsystem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code used get_taglist_string() and split the resulting
string at commas to get the list of tags. This was wrong for two
reasons:
1) It was buggy. Every tag but the first would start with a leading
space and thus not be found.
2) It was inefficient. The tag list was concatenated, just to be split
again.
Turn the tag list directly into a QStringList and remove whitespace
for good measure.
Fixes#2842.
Reported-by: Hartley Horwitz <hhrwtz@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was an old "optimization" to avoid double plotting of the
pictures, first by the profile itself, then by the picture tab.
Since the profile now updates the pictures itself, this must
be removed: The picture tab doesn't do it anymore.
Fixes#2833
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the user asks to have all BT/BLE devices shown, we should behave
consistently to the case of a recognized dive computer and always show the
device name. In almost all cases the BT/BLE address (and even worse on
iOS/macOS the weird uuids) are completely meaningless.
If there isn't a name, don't add a leading space in order to make it easy to
detect if we have an address without a name (which almost certainly isn't a
dive computer, so it should be towards the end of the list of addresses - which
will be handled in a later commit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a rather subtle bug.
In btdiscovery.cpp we are detecting dive computers based on their BT name and
are setting up product+vendor as the key for that lookup. QMap always uses case
sensitive comparisons and a tiny inconsistency snuck into our code.
libdivecomputer names for the Aqualung dive computers i200C / i300C / i550C end
in an upper case C (as matches the official branding), but in btdiscovery.cpp
we have those names with lower case c. And therefore didn't recognize these
dive computers.
Obviously this is easy to fix by fixing those three strings, but I decided that
it was silly to set ourselves up for similar oversights in the future. So
instead I switched the matching of the descriptor to simply be allways all
lower case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes cleaning up the old CHANGELOG I forgot to delete for the release
as well as mentioning the libdivecompute updates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylinder-based statistics where not updated when an undo
command edited cylinder data. Do so.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When plotting profiles with surface segments, there were strange
artifacts. As we found out with Robert, these were due to the fact
that the calculated maxtime was set to the last event which is just one
second inside the surface segment. This terribly confused the profile
code. For example, it didn't properly allocate samples for the surface
segment.
Thus, when calculating maxtime, consider the last sample beyond the
last event.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I'm not sure if Google used to show the POI marker at the center location in
the past or if this is actually a new feature. Either way this appears to do
the right thing in my testing.
Note that we need a 'plus' to connect the point of interest cooridnates,
but a 'comma' to connect the map center coordinates.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit hairy as - in theory - one gas switch can remove
other gas switch(es) at the same timestamp. However, I did not
find a way to test it. Moreover, it is not clear whether the
dive-tabs are properly updated on undo/redo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the wightsystem-type and cylinder-type delegates, when entering
data, when entering known weight- or cylinder-types, some ui fields
(notably weight, size and working-pressure) are automatically filled
out. The search was using the default flags provided by Qt: starts-with
and case-insensitive.
This had a few strange effects, when entering a string that is the
beginning of a known string (e.g. "AL6" when "AL63" already exists):
1) The wrong data was used if the new string didn't exist.
2) For cylinders it was impossible to create new cylinder types whose
name is the starting string of a different type.
3) For weights, the new type was not added to the list of known types.
This, however, is no problem, because it will be added by the undo
command anyway. A future commit will address that redundancy.
Therefore use only the case-insensitive flag (which has to be performed
by passing the MatchFixedString flag - very weird).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
