This code enables Zoom in / Out with the Wheel,
and it also enables panning by moving the mouse around.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a default pen that has 'cosmetic' enabled,
A cosmetic line doesn't change it's width no matter
what zoom level we apply.
Also , changed everything that used a line to have
that as default pen instead.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plot the numbers on the left of the profile.
It seems that everythign is being plotted -
But I can see that there are coordinate-errors on the
code. ( the GTK one plots some curves below of the
dive, but the Qt one is overlapping - probably the
way that I'm using the gc information)
Need to investigate a bit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch plots the PP text, but when I plotted I realized
that the gc.pi.mapp is being calculated wrong, probably
something went wrong on the calculations - it's comming
zered always. So, only one line & text is plotted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Left aligning text values looked wrong.
Use Qobject cast to filter labels from any other qobjects around and
set alignment. Doing this via Qt Designer would be tedious.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ctrl-C & Shift-Ctrl-C were used for next & prev DC which was considered
to be poor style.
Disable for now. Maybe replace with something else?
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
a few code was moved around, a macro that contained
the form of x ? : y; had to be rewritten to x ? x : y
since c++ doesn't allow ternarys without the middle operator.
The color-choosing for the Cylinder Pressure broke
on the Qt port - but it's a small issue.
I'm painting everyone as 'dark green' now, will
fix that later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Tomaz' code had a fixed height per tooltip item and some rather suspicious
logic how to position them (and how to size the surrounding box), based on
a fixed height in pixels per item - which of course fails if you use
larger fonts or multi line items.
This uses the bounding rects to correctly calculate the sizes and populates
the tooltip with the other dive data that we already had in a helper
function.
This also fixes a small formatting issue for gas change events.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the graphics_context part of the ProfileGraphicsView and remember
that the plot info is already a part of the graphics_context (we kept
passing around both of them in the Gtk code... pointless but a leftover
from before adding the pi to the gc...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When I changed the way that the tooltip box behaved,
I accidentaly 'ate' the mouseMoveEvent, it was being
used only to show tooltips instead of everything
that it should have. this simple patch fixes it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
A null pointer dereference occured after right click on a dive trip
because updateDiveInfo was called with dive == -1 causing get_dive(int)
to return null.
Wrap to avoid crash and clear dive info widget text labels.
[Dirk Hohndel: this is different from the fix I had committed earlier;
I decided to combine the ideas, clean this one up a bit
more and this is the result]
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed to spots where we would unconditionally dereference the dive
pointer.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Reported-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch changes the Event drawing so it can display tooltips. It is now
the responsibility of the item to show / hide a tooltip.
A bit of code-refactoring got on here too because I was using only
QGraphicsItem calls and I wanted to use a hover in / hover out event
to show / hide the tooltip.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The tooltips now can:
1 - be moved around the canvas
2 - dynamically expand / retreat when a new tooltip is added.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Establish some useful helpers and use them when updating the values.
One of the helpers (from statistics.c) puzzlingly doesn't link - so that's
ifdefed out.
Also had to re-arrange the settings reading code (it came too late) and to
extract the expanding code of the top dive from the settings reading code
(as it had no business being there to begin with).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Beautification of the triangles done, Tooltips are also displaying
Some rework on the code - don't know if dirk will accept, I'v changed
an if-else-if-else by a ternary operator, since it improves legibility
a little bit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are subtle differences, the Cairo version looks
prettier - but that's fixable. I did a small triangle
and a exclamation mark on it. maybe a gradient would
make a good difference there.
this item has a ItemIgnoresTransformation tag, so
scalling, rotating or zooming will not change it's
size.
The tooltips are not yet ported.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The plot_text function from the cairo-methods are now ported
on the qt version. this patch moves around some code since
quite defines are already used and I didn't want to reinvent
the whell.
Original code used varargs, but I prefered to change it
, so now it receives just a reference to a QString object
and the string must be constructed before sending,
using the .arg methods.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, this is what happens now:
Every tab should be populated from updateDiveInfo method, it will be
called whenever a new dive is selected
I'm already populating the 'notes' box to show how it can be done.
If you are unsure what's the name of anything, open the file maintab.ui on
the designer, click on the item and check its objectName, the access is
ui->objectName from here on.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add shortcuts to match GTK version for view menu items and the log menu
so that e.g. Ctrl+1 selects the list view.
Remove debug statements from the view functions. Leave in place for
functions with no obvious actions yet coded.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename various labels and text into clear pairs and reflect changes into
.cpp file.
To avoid clashes with names on other tabs use '..All..' to emphasise
that this page deals with an aggregate across the selected dives.
Re-format the statistics tab.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is missing the char * based settings (as I have no idea how to do
those) plus the map provider. Everything else should work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a few regressions, mostly because the text
is not being plotted yet and the background of some
of the curves are not being applied.
This is because QGrapdien is based on the coordinates
of the items that I wanna paint, but I'v setted a
QGradient that's global and doesn't take this into
consideration.
all curves are being plotted. in Small resolutions
they plot bad. but it's just a matter of redrawing
in the correct resolution.
the Line widths are being hardcoded now, on the cairo
version they weren't, this will need a bit of porting
too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This version already plots the dive-graph, with the
gradient and all that jazz. One thing that will be
easily spotted is that the size of the line is very
thick - easily changed, I'm just using the default.
As soon as everything is plotted correctly I'll
fix the lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The mean depth now is plotted correctly.
I wanted to do more stuff on this commit, but since
it required that a few things on profile.c got moved
to profile.h, commited to not have a huge blob for review.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first plotting method was removed from profile.c
to profilegraphics.cpp and some conversion ( almost 1 to 1 )
was made so that the code could work.
Since the code is big - this commit has just a part of it
working - it plots the grid. but already works for testing
the resizing of the window and Zooming ( unimplemented )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Started working on the Qt version of the Plot, initially
nothing is printed - but this is not a bad thing,
the program doesn't explodes too. :)
some work had to be done about the 'bool/gboolean' stuff
so I removed all gbooleans in the code that I'v encountered.
A new file was created ( profile.h ) so I could put the
signatures of helper methods that cairo used to call.
till now the code computes the max limits.
Next patch the first drawing will be made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The colors on colors.h were done to fill a special
struct by Subsurface - I removed that structure and
replaced the code that generated the map of colors
to a QMap. I know that this changes are not very
'welcomed', but C++ has issues on creating & initializing
complex static members, this was the best way that I could
think of.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This small patch adds a new class - ProfileGraphicsView
it's a QGraphicsView based class that will holds all
graphics-items for the plotting.
The setup is simple, just call ui->ListView->plot( dive ) ( that's
already a ProfileGraphicsView and magic will happen.
Since Im using a QGraphicsView , the size of the canvas doesn't
matter and I'm fixing it at 0,0,100,100. when a resize is done,
the resizeEvent will be called, fitting the scene's rectangle on
the view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This version already plots the dive-graph, with the
gradient and all that jazz. One thing that will be
easily spotted is that the size of the line is very
thick - easily changed, I'm just using the default.
As soon as everything is plotted correctly I'll
fix the lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The mean depth now is plotted correctly.
I wanted to do more stuff on this commit, but since
it required that a few things on profile.c got moved
to profile.h, commited to not have a huge blob for review.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first plotting method was removed from profile.c
to profilegraphics.cpp and some conversion ( almost 1 to 1 )
was made so that the code could work.
Since the code is big - this commit has just a part of it
working - it plots the grid. but already works for testing
the resizing of the window and Zooming ( unimplemented )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Started working on the Qt version of the Plot, initially
nothing is printed - but this is not a bad thing,
the program doesn't explodes too. :)
some work had to be done about the 'bool/gboolean' stuff
so I removed all gbooleans in the code that I'v encountered.
A new file was created ( profile.h ) so I could put the
signatures of helper methods that cairo used to call.
till now the code computes the max limits.
Next patch the first drawing will be made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The colors on colors.h were done to fill a special
struct by Subsurface - I removed that structure and
replaced the code that generated the map of colors
to a QMap. I know that this changes are not very
'welcomed', but C++ has issues on creating & initializing
complex static members, this was the best way that I could
think of.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This small patch adds a new class - ProfileGraphicsView
it's a QGraphicsView based class that will holds all
graphics-items for the plotting.
The setup is simple, just call ui->ListView->plot( dive ) ( that's
already a ProfileGraphicsView and magic will happen.
Since Im using a QGraphicsView , the size of the canvas doesn't
matter and I'm fixing it at 0,0,100,100. when a resize is done,
the resizeEvent will be called, fitting the scene's rectangle on
the view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Now it correctly uses the existing helper functions and keeps our idea of
the selection consistent.
There is a small behavioral change compared to the Gtk code. Range
selections no longer have the last dive clicked on as selected_dive but
instead the dive with the highest index that was selected. I don't think
that is a major issue for anyone.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clean up the formatting.
Distinguish between headings and value labels.
Tidy up text appearance (remove trailing ':')
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- rip all Gtk code from qt-gui.cpp
- don't compile Gtk specific files
- don't link against Gtk libraries
- don't compile modules we don't use at all (yet)
- use #if USE_GTK_UI on the remaining files to disable Gtk related parts
- disable the non-functional Cochran support while I'm at it
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Auto-detect on first start and keep in settings afterwards. So if the user
resizes them, Subsurface remembers the correct sizes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was written with massive hand-holding by Tomaz - actually, this was
mostly proposed via IRC by Tomaz and then implemented by me...
Right now because of the list-of-lists nature of the model we have the
small issue that every trip starts with a dark background dive, even if
the trip itself has a dark background.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code seems rather crude to me. I'm sure this could be done better.
This also makes the column alignment work again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the list and dives will work in the same way that the GTK
version does. The code got changed heavly because the old one
was just looking at the dives and didn't worked like a tree.
small adaptations on the list view and model delegates because
of the changes done on this model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The constructor letf the currentWeightsytem variable uninitialized.
Instead of creating the memory leak by malloc-ing the newWeightsystem in
the on_addWeight_clicked() function use a local variable instead and pass
its address around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
My first attempt to create a Qt dialog and to hook it up with the program.
Unsurprisingly this doesn't quite work as expected (i.e., the values I
enter aren't populated in the model), but it's a start...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename splitters and remove seemingly redundant empty splitter.
Use save/restoreState to save splitter sizes using QSettings.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use QSettings to provide persistent storage of settings. For example, we
store and restore the size of the MainWindow.
We use the organisation name hohndel.org and keep subsurface as the
application name.
A section is specified for things to do with the MainWindow; other
sections could be added e.g. for preferred units?
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the stars on the dive table I had to rework a bit my
StarRating widget, because it used a pixmap for each widget
that were created. Not it uses only 2 pixmaps: the active
and inactive ones.
A new file was created named modeldelegates(h, cpp) that
should hold all delegates of the models. For the GTK / C
folks, a 'Delegate' ia s way to bypass the default behavior
of the view that's displaying the data.
I also added the code to display the stars if no delegate
is set ( good for debugging. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Thanks to commit bdbfdcdfa0fb ('Ask Qt 4 to use the UTF-8 codec as the
"codec for C strings"') we no longer need the explicit UTF-8 conversion
when creating QStrings from char *.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just use the dive struct directly.
Suggested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveItem constructor had 13 variables. By passing it the full
dive we reduce that to 2.
[Dirk Hohndel: changed to use "struct dive *" instead of just "dive *"]
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have these data structures for a reason. They provide context
about the units used and prevent mistakes. And of course they
are used everywhere else so we should use them here, too.
This also tries to display some more data and make things look
a bit more like the Gtk version when it comes to alignment and
formatting.
My guess is this will make Qt developers' eyes bleed. My apologies.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Amend the DiveItem class to avoid float in favour of int. Add getters
which return display friendly QStrings reflecting user preferences for
(e.g.) depth.
Modify DiveTripModel to support controlled alignment by column; right
align for depth and duration.
Fix problems with utf8 encoding on rating stars, degree symbols and
O2 subscript.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A very simple to use widget:
StarWidget *stars = new StarWidget( windowParent);
stars->setMaximumStars(10);
stars->setCurrentStars( rand()%10);
stars->show();
connect(stars, SIGNAL(valueChanged(int)), someObj, SLOT(starsChangedValue(int)));
It currently uses a 'star.svg' file on the same folder as the binary.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moves the DiveTrip model related code to models.h
The DiveTripModel was implemented in three parts:
DiveTripModel.h
DiveTripModel.cpp
MainWindow.cpp (the code to populate the model)
This patch changes the DiveTripModel from it's original
implementation to the file models.h, wich should store
all models (Dirk requested the Qt developers to not create
2 files per class, but instead to use a file for functionality,
and data-models are one functionality.)
Besides that, this code cleans up a bit the style:
removed operator<< for .push_back, const references where they apply,
moved the internal DiveItem class to the .cpp since it should be visible
only to the DiveTripModel class, and redesigned the current interface of
the model to be identical of the GTK one (used the UTF8-star and 2
subscribed, for instance).
Amit (the creator of the original code) should comment here if it's ok
with my changes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add dives from dive_table to the model/view using the functions provided
to extract the dives.
We do not yet handle trips.
Formatting of date/time, depth and duration need attention.
Relies on earlier patch to delay Qt ui construction.
We should look at the signals we publish to link to other widgets etc..
[Dirk Hohndel: use for_each_dive -- clean up some white space]
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qt ui will need to read the dive_table to populate widgets with
dives. Gtk functionality in init_ui is required to parse the dives.
Split init_ui to allow parsing to proceed and complete before Qt ui
mainwindow constructor is called.
Play with qDebug()'s printf style (Thiago!)
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the code that will load and populate the Tank Info
ComboBox that`s used by the user to select the Cylinder
description.
Code curerntly implements more than the GTK version since
the GTK version of it was a plain-list, this one is a
table based model that can be used in ListViews ( like
we use now in the ComboBox ) but also in TableViews
( if there`s a need in the future to see everything
that`s catalogued in the Tank Info struct. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qtr_ hack isn't needed as in commit 720fc15b2dcd ("Introduce
QApplication") had already made sure that we are using gettext.
I didn't revert the two commits as I wanted to keep the added header
comments and fix the tooling in the Makefile as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the use of operator<<() in a bunch of lines to do direct calls
this way the code will not scare non-c++ hearted people. :)
s
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This should wrap gettext nicely and replace the "_()" macros we use in C
code.
Also added comments to the top of all the new files.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1 - Open File already open files, it tries to not break the Gtk version,
but some methods on the GTK version still need to be called inside Qt
because the code is too tight-coupled.
2 - Close file already close files, same comments for the open file dialog
applies here.
3 - The code for adding new cylinders in the cylinder dialog is done,
already works and it's integrated with the system. There's a need to
implement the edit and delete now, but it will be easyer since I'm
starting to not get lost on the code.
4 - Some functions that were used to convert unities have been moved to
convert.h ( can be changed later, put there because it's easyer to
find something that converts in a convert.h =p ) because they were
static functions that operated in the GTK version but I need those
functions in the Qt version too.
[Dirk Hohndel: lots and lots of whitespace and coding style changes]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add files for dive list model/view implementation. Replace TableView
with the custom list view. Amendments to makefile to match.
Note: we don't yet handle trips and may want to add additional columns
to describe the dive.
A single, dummy dive is added to show how this works (get root; item is
child of root). Purely to illustrate - needs proper integration etc.
Amend member names for dive list view components
Various naming changes to conform to coding style. Required changes to
members (remove prefix) and methods (avoid clash with members).
Clean up indentation (swap spaces for tabs). Code for model/view was
written with a different editor which had different settings :-/
[Dirk Hohndel: minor whitespace cleanup]
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename the 3 main widgets in the Qt mainwindow.
Wire view menu options to the setVisible methods of same.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Thiago wrote: qDebug("actionNew") also works. The current policy is to avoid
C++ style source code as much as possible.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Naming of QActions was inconsistent wrt abbreviations - fixed.
Add stub slots for each action relying on connect by name.
Add qDebug() message to allow people to check that menu items fire
slots; not really necessary but may provide some reassurance as we build
familiarity with Qt.
Some changes to display text for menu items (e.g. Tree becomes View
All).
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add some magic rules to detect which files need to be processed by the
moc or uic tools, as well as a way to manually specify exceptions.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason, 'private slots:' causes a build error but private
Q_SLOTS: works.
The error was that 'slots' did not name a type and it appeared to be
insensitive to whether the Makefile rule for .moc was in its current
place or preceeded the rule for .cpp.
Add a slot using the connectByName idiom e.g. actionNew connects to slot
on_actionNew_triggered(). Use qDebug to show this fires if the menu
option is selected.
Above to demonstrate how to begin to link menu to code paths.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Names for individual tab widgets were not specific and caused warnings
from UIC. Rename the individual widgets to reflect purpose.
[Dirk Hohndel: removed some of the hunks that appeared to be unintentional
changes not mentioned in the commit log]
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on several commits from Tomaz - mingled together and mildly
extended by Dirk (mostly Makefile hacking).
All Qt UI related stuff should eventually move into the qt-ui directory.
So the Makefile rules for moc and uic have been adjusted accordingly.
The MainWindow class has been moved into its own file in qt-ui (but just
with a placeholder, the existing class has simply been ifdef'ed out in
qt-gui.cpp for the moment).
We still have a couple of Qt things in qt-gui.cpp in the main directory...
all this needs to move into the qt-ui directory and be built with separate
.h files. Right now we have the one-off Makefile rule to create the
qt-gui.moc file from the qt-gui.cpp file.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
