- Add hyperlinks to references to Appendices A and B in the text
- Be consistent with use of numbered lists and bullets:
-- Use numbered lists where order is important (e.g. a set of instructions)
-- Use bullets where isn't doesn't matter (e.g. a list of features)
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Minor update of manual for consistency in terminology and improved style
including the section describing the companion app. No images were affected.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF export used all samples in the export when detecting previous
sample. This resulted in a very slow processing as we had to go through
massive amount of data for each event that's time was to be
approximated. The detection of previous sample was also erroneous
resulting in incorrect depth samples for the events in some occasions.
This patch should address these issues. And along with patch that
included pressure data on import this will fix the bug #499.
Well, the performance after the patch is still not stellar, but still
quite a difference with such a small change. The sample set of 8 dives
(with one event each) takes now less than 5 seconds instead of the
original 36 seconds (measured by doing the conversion with xsltproc).
Fixes#499
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes minimum pressure from manually added cylinders to be taken
into account on scaling. Without this, manually added cylinders might
lead to pressure dropping below the Y axis 0 line (e.g. when first
"computerized" cylinder is 220->140 and second, manually added cylinder,
200->50 bar).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The behavior at startup is actually very annoying: we select the latest
dive, and expand the trip it is in, but since we use "scrollTo()" on
just the dive, and it's not initially visible, the startup will make the
first dive be at the top of the list view.
Which means that the actual _trip_ detail is not visible at all, since
it will have been scrolled off the list view entirely.
Fix this by first scrolling to the trip, and only then scrolling to the
actual dive (using the default "EnsureVisible" policy). Obviously, if
it's a trip with lots of dives, scrolling to the dive may end up
scrolling away from the trip header again, but at least that never
happens at startup, and at that point you have to scroll away from the
trip just to show the dive.
Do this same dance when changing the dive selection (mainly noticeable
when picking dives on the globe view).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having all the grid lines in the same color made things visually
confusing. To clean this up a little make the heartrate lines a light gray
color.
Fixes#484
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing the location string we try to be smart and automatically add
the correct coordinates (assuming we have a location of this name already
in the dive list). So if you return to the same dive spot you'll get the
correct coordinates by default. But this creates bogus result if we allow
an empty location to be matched, as it makes no sense to assume that all
dives without a location name were at the same coordinates.
Fixes#498
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of just having "Created by subsurface <version>", put the number
of dives and the location of the last dive in the message. That makes
things like "gitk" show a much more useful view of what actually got
saved.
We still save the subsurface version in the body of the message, because
that is interesting and relevant information. It's just not the
*primary* relevant information.
Anyway, with this, a git commit message might looke something like
dive 474: North West Point (Christmas Island)
Created by subsurface 4.0.96-17-g649e9ed89d9d
which is much more relevant for the common case of adding new dives at
the end.
Of course, if the reason for the save is that you edited old dives, the
relevance of the commit message telling you the number of dives you have
in the log and the dive number is questionable. But then you have to
look at the actual diff to see what's going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Importing pressure samples on UDDF import was missing. This patch adds
that bit of information to our import.
See #499
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They happen - maybe the cylinder actually warmed up, or maybe the user
entered just a ending pressure without a starting pressure. Regardless,
just ignore cylinder pressure changes that go up.
Also ignore cylinders with a zero ending pressure: that's really a
*missing* pressure rather than an actual zero pressure. As Dirk says,
the scuba regulators don't even work without a healthy positive pressure
differential, so even when you breathe down a tank to "empty", it won't
be at zero pressure (this is true even with gauge pressure, where zero
means "atmospheric pressure").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DateTimeOriginal should be used as first option when loading images.
When images are modified, the original time should be retained, but the
DateTime will change to the edit time.
See #495
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds option to export selected dives into a CSV file to the right
click menu on dive list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an item to File menu to export all dives in CSV format.
Naturally this includes also the code to perform the export.
Fixes#434
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's make the export consistent by quoting the header line the same way
the sample rows are quoted.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When exporting UDDF logs the file name selection dialog should talk
about export, not save. This patch changes that text
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing the Hotkeys inconsistencies in subsurface, All the popups should
react to 'esc' and 'ctrl-w'/'cmd-w' as 'cancel'. also 'ctrl-q'/'cmd-q'
should quit subsurface.
Fixes#489
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding the ability to close the shift times window, also Quit subsurface
with this window in front.
See #489
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the ability to close the about window with the ctrl + w
shortcut.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface companion is, basically, the same from last Subsurface release,
it's only been added with the map feature which is depicted here.
Distance between positions takes precedence over time between them, so you
can have positions faster than one each period set in the "Min Duration"
setting. Actually this setting seems useless as you won't have a fix each
period if distance is under "Min distance".
Lesser changes in manual involving Background Service, the dificulty on
matching times and little personal recomendations.
[Dirk Hohndel: minor language changes]
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to quit Subsurface with a Ctrl-Q shortcut even if the yearly
statistics window is active.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables closing the yearly statistics window with esc or ctrl+w
keys.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to close the user manual window with a Ctrl-W shortcut.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds more handling of missing actions for the mouse on
the equipment edition. It complements the stuff talked about
on bug 359, but it's a different issue. 359 seems already fixed.
See #359
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a download is canceled, discard the partially downloaded dives.
Fixes#341
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This bug don't exists when saving to git storage, only when saving XML.
The latitude and longitude were being discarded if the location name was
not set and this breaks some users workflow. Not nice.
This should fix the final missing part for bug #440Fixes#440
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the auto-completer while the tags widget is 'empty', always picked
the first choice.
Write some letters and remove them in an empty tags widget, the complete
list of tags will appear - now if you try to choose any tag with the
keyboard arrows it will choose the first one. also if you tried choosing
it by mouse it will be inserted twice.
This is fixed by removing the unneeded else part.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing an out of tree build you don't want to stage the package with
the source but under your current directory. So let's make sure we
distinguish between source and target here... and instead of putting
things into packaging/windows they now end up in staging which is much
more consistent. And to make my life even easier, the installer .exe ends
up in the base dir in which you build the package.
Also, we link statically against libdivecomputer, so don't pack the dll.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is all mostly to make my life easier.
I'm not thrilled with the marble changes - as Linus pointed out before the
way we do these "LIBxxxDEVEL" changes is broken as it will still first
link against any library installed in the system. But since I have removed
any globally installed copies of these libraries this actually works for
me and it does help when experimenting with different build options for
the main libraries that we depend on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) Two of the major screen images were replaced to reflect the current
screen layout with the new features of the profile toolbar.
2) The heart rate button is depicted and desribed.
3) Minute changes to the text of the manual to accompany the above changes.
4) The Uwatec Galileo image is re-inserted in the icons folder. Somewhere
it got lost.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way I can have a different directory from where I build Windows
binary without interfering with my native build in the source directory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changing the default font on Windows to Calibri instead of Sans to fix the
subscript issue.
Fixes#461
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a manually added dive is saved we cancel the plan. In that process
we throw away the cylinders which triggers a redraw of the profile. Which
tries to access the diveplan and its data points that have already been
freed. BOOM.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing the values of air/water temp after the first time and save,
it will be reset the intial value.
This is fixed by removing the "select_dc" (which makes the change to the
dive struct instead).
Fixes#457
Signed-off-by: Yousef Hamza <jo.adama.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
