After a replot, check if there is an error message to display.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Each state can have the same widgets but with different
properties - currently I'm using "enabled" : true and false
for the DiveSiteEdit, it looks like a big amount of code
for such a small thing but it was the cleaner way that
I tougth of doing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Try to get a pretty print message when a device discovery error
is raised and it is unknown.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a Bluetooth device is selected from the discovered list
display information about its address and enable the save button.
On Windows we don't need to check if the devices are paired because
the pairing process is done automatically on the connection step.
If the devices are not paired Windows will ask for user's permission
to continue the process.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are moments when the name of the device is not collected
properly and it is unavailable. Instead of showing an empty string
then print the address of the device.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows we cannot determine the pairing status of the
device. Therefore we print only information about its name
and about its BTH address.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should wait for the WinBluetoothDeviceDiscoveryAgent completion
when the stop method was called.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows we cannot select a device or show information about the
local device. Therefore we disable the UI section related to local
device details.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement a custom lookup service for remote Bluetooth devices
discovery. This will be used on Windows platforms to collect
information about the name and the address of a remote Bluetooth
device.
In the beginning we initialize the queryset with the necessary
flags and we start the lookup service. When a device is discovered
we collect information about its name and its address and we
raise a signal with it using the same signature as the one emitted
by QtBluetoothDeviceDiscoveryAgent implementation.
Finally we end the lookup service and we reset the internal flags.
This code was written with the help of the sample code documenting the
relevant APIs provided by Microsoft Corporation at
https://code.msdn.microsoft.com/windowsdesktop/Bluetooth-Connection-e3263296
which is under the MS-LPL. No code from the samples was copied and the
code in this commit is covered by the GPL and not the MS-LPL.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a skeleton which will be used to develop the Bluetooth custom
serial implementation for Windows platforms.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old implementation didn't use the correct deviceLabel pattern.
When the pairing status of a device was changed the name of the device
was missing from the new label. With the new implementation when the
pairing status is changed we replace the old state with the new one and
maintain the device information from the old label.
Also we set the same pairing background colors used in the
addRemoteDevice callback. In this way the label's state is consistent
and the UX is improved.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clear the Bluetooth discovered devices list on each search.
In this way we will show only the devices that are in range
and active during the last scannning. Also if we clear the
list before each call we don't need to check anymore if the
discovered device is already in the list.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there is no error reported when the device scanning is finished
then report to the dialog status that the scanning finished
successfully. Otherwise report the last error.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do some extra cleanup when the BtDeviceSelectionDialog is
destroyed.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After renumbering any number of selected dives, the selected
dives would still be selected, but this was not visible from
the divelist view. Clicking on subsequent dives would deselect
them while the GUI shows them as selected, any further action
like delete would not be done on the visible selection, but
on the invisible dive->selected state, leading to apparently
very weird behaviour.
Fixes#917
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes deco_allowed_depth() work both for Buehlmann as well as
VPM-B (as long as the VPM-B internal variable total_gradient[] is valid).
As a bonus, in VPM-B mode, in the planner, the ceilings are VPM-B ceilings
and not Buehlmann GF.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conservatism level can now be changed from gui, is saved in settings.
Also way of disabling the planner settings in the ui was improved
to support more deco models and be called at the widget creation.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Disable all the UI elements for "dive list print", disable
all the template settings as well, Template Edit button
will be enabled after statistics print supports color palettes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
As there is a problem with sizing the borders in QWebView, "vw" sizing is not
working as supposed with border-width, As a workaround we export border-width
dynamically, so that border-width is relatively the same for all page sizes.
The border-width is equal to the page width / 1000 which gives a nice range
for borders for A0 - A5 papers, Also prevent drawing zero pixel borders
and use 1 px borders as the minimum border.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Make dark colors for headers while lighter colors for data fields, this
is more intuitive, and makes the palettes more appealing.
Make dark color default for cells2
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Add another color 'Table cells 2' to the color palette, make all the
backgrounds solid white by default.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
While printing only draw headings, SP changes, gas events or bookmark
events, otherwise don't show anything.
Many warning logos can hide the useful information especially in
templates with small dive profile area.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
There's no need to show the 'dive site' name on the group box
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When choosing a color from the QColorDialog, the TemplateEdit trigger to
change the current selected template to be custom, and then changes the
selected color. When the selected template is changed old template
values are copied to the current template which results in incorrect
behaviour.
This is fixed by checking for the current editting state before setting
the saved palettes as the current used palette.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
The custom palette index is defined by the CUSTOM directive, and it
should be used.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
When QColorDialog is closed with 'Cancel' button, it returns invalid color
that must be discarded. So check if color is valid to prevent replacing
the current color with black.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Some widgets on the main tab don't show any kind of focus indicator on
some systems (like Mac), so it's a good thing to provide another way to
show that they indeed have focus.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model should be used inside the Edit Dive Site mode.
It should display all photos from all dives that are part
of this dive site, ignoring trips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching from one DC to the next, the text of DC name is not updated due
to commit 487ddce353. This patch re-inserts the
call to updateText() for the specific function to get the DC name updated
properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't try to connect the globe when NOMARBLE is active.
Check exisistance before trying to open an image file.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely, it still doesn't show the flag where it should be
(but it shows just after a reselect, so it's mostly a cache
issue somewhere)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we clicked in the globe and changed programatically
the text on the coordinates edit widget, the background
was still white instead of the bright yellow that it should
have to show that it was modified.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The accept method didn't save the gps edit even if we
put correct text on it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now when the user selects the dive site edit, the globe
will enter in edit mode too.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a placeholder for now, but next commit will make it work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed to start easing the transition from the completely
wrong and bogus MainWindow::instance()->globe() calls. this is still
wrong, but with it I removed one level of indirection.
I did that now because I wanted to not taint the location management
when I use it to deal with the globe.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't correctly update the dive site as soon as the
dive_site edit finished, and this time we are actually
correctly updating things using signals instead of calling
the mainwindow for everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And move things around, informationManagementEnded was a good name
but endEditDiveSite is better.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Manage dive sites action should be in the View menu because it makes
more sense to "view dive site edit"
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We really shouldn't need to connect to the MainWindow in order to get the
right scale for the fonts when printing. While printing likely will remain
a desktop only function, this is just bad design. And making calls like
this from the paint() function is a bad plan, anyway.
So instead we make sure that every DiveTextItem knows what the printScale
was when it was created (or actually, when the text was first set as they
frequently get created before we have a scene which we use to get to the
profile), and gets updated whenever that scale changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had all this wonderful code to scale the text correctly, except we went
out of our way to make sure the code wouldn't be called unless something
changed on this specific text item. But that's bogus because the scaling
depends on external factors like the fontPrintScale.
So instead of calling updateText() when attributes of this DiveTextItem
change simply call it right before the DiveTextItem gets painted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having it as part of the DiveCalculatedCeiling class caused us to manage
this text 17 times (and plotting it 17 times) which is rather silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on the Subusrface logo colors, keeping the hue and modifying
the saturation and value in order to get what to me looks like a fairly
pleasant color setup.
This is an attempt to come up with a good default. By all means, this is
supposed to be a starting point to make it better, not a decision on what
the colors should be. I would however claim that they are better than the
previously available options :-)
I like the idea of basing this on our existing colors - but even that is
up for modification if someone has a better proposal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code trusted in Windows new lines with length of 3. The new code
strips out spaces and line ending chars resulting in empty line being
of length 0.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When importing a template, make it the user currently selected template.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
If user selected template is not found, we choose the first template as
a default choice.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Implement 'import/export' features, so it's easier to share
customized printing templates. Also support deleting existing templates.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Use the button group to import, export or delete a template from the
printing_templates directory.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
"Table" print is now a template, so remove the radio button.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
As I am using the same old QSettings group name, some variables may not
be correctly initialized, so we need to check for incorrect values
before we start.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We save the selected template name on closing the printDialog, We also
load the last selected template from QSettings when initializing the
dialog.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We use templates from the grantlee templates list created and
dynamically. So we don't need static templates anymore.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We don't need static template names anymore.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We need to dynamically look up for all the existing templates in the
template directory. A grantlee template can be named any name but we
ignore files ending with '~'.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
It seemed correct when we changed the dive_site that we could be
editing, but we don't do that anymore. (I actually think this
should be self-contained, no global that a lot of widgets can
change)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correctly show the dive_site information on the labels.
still crashes on accept / reject.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an edit dialog, not a create dialog.
This makes Subsurface crash but it's a step in the right direction.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Return to the default mainwindow state when the user accepts
or rejects the dive site edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since now we found the perfect way to deal with dive site handling on the
dive, we can reenable this widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When testing subsurface-mobile on the desktop from an account that had a
default file set up in the Subsurface preferences that file would already
be loaded creating rather confusing output.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't perfect (if you make multiple requests things could go badly),
but it's better than just slapping the new password into the settings,
even if the update failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XSLT parsing treats this as numeric value, thus we need to strip out the
" s" part.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds importing of sensor values from the second DC on APD log
import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If APD Log Viewer format is automatically detected, we should set the
sensor values to be imported properly. These need to be added to the
firstline and since we convert the number 2 from column headers to
subscript, this step must be skipped for the APD import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to test for the sensor values on CSV import, not the po2.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hard coding the values of known imports is quite awkward if we add
these. Thus switching to use enum and names instead.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The import of setpoint values is tested with Seabear data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The divelog export dialog was changed to default to the HTML export when
changing the layout to resemble other dialogs (commit 42acaa40).
However, the default tab should be the first one with most of the export
formats and options.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I was wondering why the colors where wrong on mac, it took
me a while to find the correct spot to fix. It seems that
the Brush is not used to paint the fonts, but the Pen is.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Davide complained about a flickr on windows, I think it
has to do with the QPainter now knowing the right
size of it's paint rect. this should fix it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removing dead code. the call above this does that already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also remove the quick hack from commit 947fda14c5 ("Bluetooth support:
quick build fix for Qt5.2"). I should have thought this through before
pushing that commit, but oh well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The InvalidBluetoothAdapterError error code wasn't introduced until Qt5.3,
so let's not test for it on older versions of Qt.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Advice the user to use his operating system for the pairing
step if the remote device requires a custom PIN code.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there is only one local Bluetooth adapter, then hide the
selection combobox and the label.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't close the Bluetooth selection widget if the default local
Bluetooth adapter is invalid. Maybe there is a problem with the default
Bluetooth device and the user has another one (a BT dongle) which can be used.
If the selected device is invalid then update the UI information,
disable the available buttons and announce the user about the problem.
Also move the device changed logging message before we call the
update information method. In this way the logging message with
the problem will not be overwritten.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Register to the signal emmited when an error occurs during
Bluetooth device discovery and log a description of the
error which can be used to identify problem's cause.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reinitialize the Bluetooth device discovery agent when the user
selects a new local Bluetooth adapter using the address
of the selected device.
Before this patch the agent was always using the local default
Bluetooth adapter.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a combobox which can be used to list/select the available
local Bluetooth devices. In this way, if a user has more
than one local Bluetooth devices (integrated, dongles, etc.)
he can choose which one he wants to use.
Before this patch, only the default local Bluetooth device
could be used.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After commit 619e97ee4f ("Stop the SDP agent if the Clear/Save button
was pressed") we don't need to block the save button anymore for scanning
completion because the SDP agent will be stopped manually if the Save
button was pressed.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cancel button is more relevant to the dialog message.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We can use custom color palette to edit current color palette.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- save custom colors to QSettings.
- load custom colors from QSettings.
- set almond color palette as default palette.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add button group and attached edit buttons to it.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- Add default color struct
- Init the color struct with default colors
- Show color text in labels
- Preview colors
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Select custom colors for print templates, by default there are
five colors that can be used dynamically in prints.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
- Trigger re-rendering on the QPixmap if fields changed.
- Change template selection to custom if template text changed.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
On update call Printer to render on the QPixmap.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add apply button to the dialog, Update the preview after applying
the new settings.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Check if data is changed before saving the new settings.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Show QPixmap in QLabel, Use Printer class to render the Preview on
the QPixmap.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add PRINT/PREVIEW print modes, check for printing modes before
casting.
We must pass a QPaintDevice with type QPixmap for previewing and
with type QPrinter for actual printing.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Before overwriting the new template show confirmation message.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
On Android platforms the system is configured to raise the
itemActivated signal when the user double clicks an item.
Since the items are small it is pretty hard to double click
them. Therefore use the itemClicked signal instead of the
itemActivated signal.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the Cancel button was pressed then we should stop the
SDP agent. The same thing happens when the Save button
was pressed. We don't need to add new BT remote devices
to the list if the widget was closed or if the list with
the discovered BT devices was cleared.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not convinced that this is useful enough to keep, but let's give it a
try and see what people think.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were returning false here which meant that we were
overriding the information with the wrong value later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is already implemented as a signal-connection
on the maintab.cpp / globe.cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
paint methods should be used only to paint, not to trigger other
widget behaviours ( we could got ourselves into a bad recursion
bug from that ). Also, enabled mouse tracking to correctly track
the mouse movement inside the widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should only show one possibility if the dive_site name
string is unique - we don't have that dive_site yet - so
we pass to the Completer filter a Dummy string that will
surelly not be a dive site - konami code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way when the user looks through the list of completion options the
globe behaves in a consistent way, i.e., if the current dive site has a
GPS fix and the user activates one of the two options to create a dive
site with that GPS information, the globe show the right area (and the
globe zooms out if the current dive site doesn't have a GPS fix).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way in the future we can pass in a pointer to a dive site that isn't
linked in our dive site list yet (i.e., while we are editing).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now have TWO special entries. One with just what the user has typed and
one with the first completion of that text. This way both Henrik and Linus
can get what they want. I'm not sure I love this, but it's easy to revert
if the consensus is that this is too confusing. But it's much easier to
discuss this if people can actually play with it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just because we want to update the latest information on the Notes tab
doesn't mean we are done editing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After an edit when the dive is redisplayed we are not copying the data
from current dive back over displayed dive (as the reasonable assumption
is that we just edited the displayed dive and copied the information into
the current dive)- so make sure that after the dive site handling the
displayed dive does in fact have the correct dive site information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we download GPS data from the webservice we can end up with dive
sites that are simply a place holder for the the GPS fix. If we replace
the name of one of those sites we should just delete the site (assuming it
isn't used in another dive, which is unlikely but theoretically possible).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- do not create dive sites unless the user has accepted the changes
- all modification are tracked in the displayed_dive_site
- when the user accepts the changes, the real dive site list (and the
selected dives) are updated according to what is in the
displayed_dive_site
This adds quite verbose debugging messages and disables a section of code
that has a special case for data created by the Subsurface web service.
This code needs some re-thinking and should eventually go away.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way a QCompleter works is that it grabs whatever
data it has in the completerRole and sets it back on
the line edit.
I Bypassed the QCompleter delegate to show something
other than the completerRole (so, for instance, if you
write 'B', you could get 'Blue Hole' as the returned text,
but in fact the QCompleter has the 'B' as internal string
(because of the weird - and wrong way in which we are
dealing with completion - trying to complete for something
that's not inside the model yet).
So I hooked up a signal that will listen to the complete's
index, and if it's the first row() it's surely the special
case - then we bypass QCompleter return string and use
our own.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user has picked their preferences of which taxonomy data they want to
see. Show them what they asked for.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If both the displayed dive and the dive site which is shown as a potential
completion have a GPS fix, indicate the distance.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not overwrite a dive site if the name is the same
as any other dive site, create a new one and duplicate
the information.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hooked up an eventFilter on the QListView that displays our dive sites so
it would filter the keys enter and space, storing the current dive_site
uuid when that happens.
Also it stores the uuid on clicks.
Now we need to get that information when processing acceptedChanges() and
check if the uuid stored there == displayed_dive_site.uuid and also if
text != displayed_dive_site.name, because if the user didn't click on
anything but only wrote stuff on the LineEdit no dive site would be
selected and so uuid == displayed_dive_site.uuid (wich would mean 'no
changes')
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Block the Save button on Android platforms until the scanning
for remote Bluetooth devices is finished.
The reason we do that is because there is a bug on the
Android platform or on the QtBluetooth library which stops the
downloading process and blocks the devices on the Download mode.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Generic divelog might come with the .sql extension, thus adding that to
the file filter.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This teaches the edit divemode about the fact that we can have multiple
dc's with different divemodes. The previous code always just edited the
first dc.
This was reported by Ian Pitt in:
https://groups.google.com/forum/#!category-topic/subsurface-divelog/4Zf47KS4Ifk
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fact that Marble doesn't tell us when it's done flying to the next
point is making this excessively complicated to get right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Divide the space eaqually to all three settings panels.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The state handling is a pain to do manually, but I can't really
use the style painter because if I do that it would paint the
string of the model (and that's something I don't wanna do)
so I clear the text, draw the control, then I paint the stuff
that I really need.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Taxonomy text should be used if there's a taxonomy
for the dive site. If there isn't, then use coords. If
there's none, then nothing will appear on the bottom
of the dive site name.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makes the location delegate pleasant to the eye.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the completer wouldn't show the delegate if the line order
of the code was different.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some QT objects in the planner ui files had generic label names.
Give them proper names so we can see where they belong.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The notes optiopns are rather few, if we move them under the gas options
we can save a bit of hirizontal space.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes the tab stop order on the planner settings page.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When VPM-B is the choosen deco algorithm changing,
GF low and high have no effect. So lets disable them similar to what we do
for recreational mode.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Restructure planner GUI for improved clarity of how settings are related.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make precedence of && over || explicit.
Explicitly convert between char * and unsigned char *.
Don't assign potentially negative return code to an unsigend variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can selectively turn off Facebook support.
And turning off both Facebook support and support for the user manual
allows us to not rely on QWebKit which once again allows debugging
Subsurface with valgrind on Arch Linux.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement a dialog which can be used for remote Bluetooth devices
selection and to control the local Bluetooth device.
Functionalities of the widget:
- expose information about the local BT device
- scan for remote BT devices
- pair/unpair with a remote BT device
- turn on/off the local BT device
- logging
- save the selected BT device
The selection dialog is created when the bluetoothMode checkbox
is enabled.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The checkbox will be used to enable the Bluetooth
downloading mode. The button will be used to create
a dialog selection where the user will be able to
scan and select remote devices.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least my compiler warns about ! binding stronger than == and
thus comparing a bool to an int. I guess this is what was meant.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the main area to edit the templates inside Subsurface.
Whenever the user edits a template the edited template is saved in
custom.html and custom.html is considered the selected printing
template.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
-Remove unneeded parameter to member variable
-Check if template_options struct is valid
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add:
-custom.html template
-custom template to print_options struct
-options to the options dialog
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The template_options struct needs to be passed to TemplateLayout
constructor.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
TemplateOptions struct must be saved to QSettings after the window
is closed, also it must be recalled when initializing the window.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The template_options struct holds the settings variables in the code.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Edit button should open TemplateEdit dialog.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The TemplateEdit class works to customize the tempalate before printing,
User can select the font-size, font-type, color-palette, linespacing
and editing the template HTML code.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Show warning message before proceeding to print 'Table' or
'Statistics' print layout. This should be used during the
development phase only.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add preview dialog that shows the printer contents before printing.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Removed recreational mode from ui and pref and replaced it with
new deco_mode enum.
Added radio button ui selection.
Set default deco_mode to Buehlmann algorithm.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
No point in searching for the right tag if the user picked no taxonomy to
be shown. And no point in showing an empty value, either.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
