Commit graph

9108 commits

Author SHA1 Message Date
Dirk Hohndel
ab3c6731be Fix the profile coloring
We were missing the last sample (which is usually a fast ascent).
Also, reduced the velocity smoothing to 15 seconds as the 30 seconds were
hiding too much valid information

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-29 22:53:03 -07:00
Dirk Hohndel
775a081769 Correctly parse the braindamaged tank size information from uemis
Admittedly the cuft ratings are stupid, but still, it's not that hard.
In order to correctly describe a tank based on the cuft system you need to
know the cuft AND the working pressure. But the uemis Zurich always
assumes that the working pressure is 200bar. That's pretty close to
3000psi and therefore works "good enough" for Aluminum tanks - but in
general this will of course fail (e.g. for HP or LP tanks).

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-29 22:12:42 -07:00
Dirk Hohndel
529412aa37 Fix uemis parser to work with base64 data that isn't a multiple of 3
I had forgotten the '=' sign as valid character in base64 code

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-29 18:01:58 -07:00
Dirk Hohndel
cbcfcddfb1 Yes Linus, gas pressure can indeed go up during a dive
At first glance it seems logical to make the ending pressure be the
lowest pressure observed during a dive. But if you do valve shut down
drills with a tech setup (where you have a fully redundant double
tank setup with two valves, two regulators and a manifold in between),
then you continue to breath from what is indeed the same "tank", but still
the valve on which your air pressure transmitter sits does get shut down
and de-pressurized. So your pressure goes down by quite a bit, and then
comes back up when the valve is turned back on.

And the ending pressure of the dive (which is used for things like the SAC
calculation) is indeed potentially higher than the lowest pressure
observed during a dive.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-29 17:45:26 -07:00
Dirk Hohndel
56a24917cb Allow larger tanks (change maximum from 200 to 300 cuft)
We don't handle doubles any different than single tanks - so while
200 cuft was a sane maximum size for a tank, once you dive with
doubles this logic fails.

We may or may not decide to implement special handling for doubles at some
point, but for now simply allow for tanks all the way up to double-150.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-29 17:42:58 -07:00
Dirk Hohndel
912ce7941f Remove average depth from print
It looks confusing in black and white

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-28 15:53:16 -07:00
Linus Torvalds
145c470bc3 Merge branch 'ui' of git://github.com/dirkhh/subsurface
* 'ui' of git://github.com/dirkhh/subsurface:
  The notebook pages can only be dropped back into the main notebook
  Linus would like to be less on the bleeding edge of Gtk+
  Use the correct signal to avoid Gtk-CRITICAL error message
  Clean up the drag and drop code and allow ripping off the Dive Profile
2011-09-27 20:27:28 -07:00
Dirk Hohndel
d37d7211ca The notebook pages can only be dropped back into the main notebook
Disable the secondary notebooks that are created when ripping off a page
(dive_list or dive_profile) as drop targets for other pages.

Also fix the incorrect arguments for the drag callback function.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-27 19:47:19 -07:00
Dirk Hohndel
79a866f5b4 Linus would like to be less on the bleeding edge of Gtk+
So we go back to the old interfaces to identify the notebook as part of
one group - the one that was just recently deprecated

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-27 17:11:08 -07:00
Dirk Hohndel
fda230235c Use the correct signal to avoid Gtk-CRITICAL error message
We used the wrong signal - "data-drag-received" is intended to check
whether the target will accept the drop. What we want is the "drag-drop"
signal which tells the widget that something was dropped on it.

Also fix an embarrassing lack of NULL pointer checks in my string
comparisons...

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-27 17:03:15 -07:00
Dirk Hohndel
f4d50ffa3b Clean up the drag and drop code and allow ripping off the Dive Profile
Linus had used some deprecated interfcase and didn't correctly untangle
the new window that he created (hiding it the window... very nifty).

I think I'm closer to the real solution with a data structure that keeps
track of the components of the new top level window that I need to be able
to untangle (and eventually, destroy) at the end.

The one error I also can't seem to get rid of is the
Clean up the drag and drop code and allow ripping of the Dive Profile

Gtk-CRITICAL **: IA__gtk_selection_data_set: assertion `length <= 0' failed

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-27 16:23:59 -07:00
Linus Torvalds
dd89b47334 Add note on dive computers using the same import engine
Lots of dive computers are just variations on a theme, or sometimes even
just rebadged copies of each others with different manufacturer and
model names.  The import dialog may not mention your exact dive computer
by name, but that doesn't necessarily mean that you cannot import data
from it.

Make that clearer in the README, and list the rough list of dive
computers supported by libdivecomputer.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-27 14:09:21 -07:00
Linus Torvalds
1d7f5a4de1 Add drag-n-drop support to be able to re-integrate the dive list
This is somewhat hacky, and there is clearly something I still don't
understand about gtk selections and drag-n-drop.  Dropping it back
works, but I get a nasty error when I do it:

   (subsurface:8512): Gtk-CRITICAL **: IA__gtk_selection_data_set: assertion `length <= 0' failed

even though I actually never set any selection at all directly.  So
there must be some internal gtk rule that I am violating, but I can't
see what it is.

I probably shouldn't commit it with a known ugly wart like that, but I
really have no clue.  Maybe somebody else can figure out what is up.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-27 12:54:53 -07:00
Linus Torvalds
3ca194b346 Don't mark the divelist window transient
That also makes it always stay in front of the other window, which is
just annoying.  I only did it because I wanted to make sure it dies when
the main window does, but since we just kill the main loop when closing
either window, that just isn't an issue.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-27 11:38:31 -07:00
Linus Torvalds
30ee87be92 Merge branch 'otu-tracking-v2' of git://github.com/dirkhh/subsurface
* 'otu-tracking-v2' of git://github.com/dirkhh/subsurface:
  Store options in gconf
  Add preference option to chose if SAC and/or OTU should be in divelist

Fix up trivial conflicts in gtk-gui.c (cleanup in gtk dialog wrt
gtk_dialog_get_content_area() having introduced a new 'vbox' widget)
2011-09-27 11:05:39 -07:00
Cristian Ionescu-Idbohrn
1bf28b68c9 A Makefile 'clean' target is quite standard.
Signed-off-by: Cristian Ionescu-Idbohrn <cii@axis.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-27 10:48:52 -07:00
Dirk Hohndel
f3134cbb89 Store options in gconf
While it's not the most elegant way to do this I opted to store the
options with "inverted polarity" - i.e., the options that are supposed to
default to "True" are stored inverted since gconf reports an unset option
(first time the user runs the program) as "False".

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-27 10:47:28 -07:00
Linus Torvalds
2a8f7ab78f Merge branch 'otu-tracking-v2' of git://github.com/dirkhh/subsurface
* 'otu-tracking-v2' of git://github.com/dirkhh/subsurface:
  Make OTU column invisible by default
  Add OTU to divelist
  Calculate OTUs for every dive

Fix up trivial conflicts in dive.h (due to dive event handling also
adding a field to the dive structure)
2011-09-27 10:46:42 -07:00
Linus Torvalds
7bbe44f46a Make the dive list start as a plain notebook page
I've been wondering how to make 'subsurface' work better on a small
screen (I used to travel with a crappy netbook - I may have upgraded my
laptop since, but it is still a design goal of mine to make sure it all
works fine in that kind of environment).

And ever since the dive list was made much wider and moved below the
notebook, it's annoyed me how much room it all takes if I want to have
both a reasonable plot window and several dives visible at the same
time.

The solution seems to be to just make the dive list be a notebook page.
That makes the default layout very dense.

At the same time, when you have the pixels, it's horrible, because you
would want to see the dive list and move between dives while at the same
time also seeing the dive profile change.  But that is solvable by
simply making the dive list notebook page be detachable, so if you have
a nice big screen, just detach the dive list page and now you have
independent windows for the dive list and the dive info.

NOTE! I don't have any way to re-attach the dang thing.  I think I'd
need to learn about drag-and-drop targets etc.  So once you've detached
the dive list, it stays detached.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-27 10:38:07 -07:00
Dirk Hohndel
0aad4d6094 Add preference option to chose if SAC and/or OTU should be in divelist
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-27 10:16:40 -07:00
Dirk Hohndel
dc2a0c1909 Make OTU column invisible by default
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-26 16:05:24 -07:00
Linus Torvalds
8eeeb97b85 Update Mares IconHd parsing to current libdivecomputer interface
The libdivecomputer interfaces are pure crap.  There are no generic
"open the dive computer" or "create a parser for the dive computer"
interfaces, instead each dive computer you support has its own open and
parser generator interface.

And they change.  Happily fairly seldom, but they change.  And two days
ago, Jef changed the interface for the Mares Icon HD computer in order
to support the newer HD Net Ready variant.

I've asked Jef to make a sane interface for "open the dive computer" and
"just create the parser" for libdivecomputer, but he claims that he
cannot just track the device model details internally.  Which is
obviously a completely bogus claim, since the way *we* track the model
details is to just feed it back from the silly event.

libdivecomputer should just do that internally and not bother us with
its crazy internal model numbers.  But whatever.

In the meantime, work around this braindamage, and hope that
libdivecomputer comes to its senses some day.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26 13:14:41 -07:00
Linus Torvalds
5c8305588b Stop libdivecomputer import when we start seeing old dives
I don't know about other dive computers, but the Suunto Vyper Air is
slow as hell to import all the dives from.  And libdivecomputer seems to
be importing dives "most recent first", so this just makes it stop
importing dives when it finds a dive that we've already seen.

Caveat: libdivecomputer has this fancy notion of "dive fingerprints",
and claims that's the way to do things.  That seems to be overly
complicated, and not worth the bother.

If you worry about the import finishing early due to already having some
dives with the same date in your dive list, just import starting from an
empty state, and thus get a pure "dive computer only" state with no
early out.  Then you can just load the old dives afterwards, and depend
on subsurface merging any duplicates.

But for normal operation, when you just want to import a couple of new
dives from your dive computer, the "exit import early when you see a
duplicate" is the right thing to do.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26 13:04:14 -07:00
Linus Torvalds
a1a4392e8d Add a copy of the GPL v2 to the project
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26 11:18:28 -07:00
Linus Torvalds
5c3bdd9fc8 Add the version to the Makefile
Not quite the same format as for the kernel, but I want to do the normal
"edit the makefile before making a release" model that I'm used to.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26 11:04:50 -07:00
Linus Torvalds
13ef2fbbe5 Update README to reflect the fact that /dev/ttyUSB0 is no longer hardcoded
Yay.  It's not like we're all done, but the hardcoded dive computer
location was one of those "I don't want to release 1.0 with this".

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26 10:06:00 -07:00
Linus Torvalds
da47ee401d Add a GtkEntry to allow editing of the device name
Ok, so some file chooser widget with a popup dialog would have been more
professional, but I'm lazy.  Plus I suspect the popup would look
horrible when populated with /dev entries, and I don't think there is
any sane filter function.

So this works, and means that you don't *have* to recompile the whole
program just because you have your dive computer on something else than
a USB serial line.

I suspect I should save the default name as a config variable too.
Maybe a setting in the preferences dialog.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26 09:44:27 -07:00
Linus Torvalds
acca9b1804 Add a "Dive Computer" frame around the dive computer choice in import
I'll add a widget to allow the user to select the device too, so let's
name things to make them more obvious.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26 09:19:30 -07:00
Linus Torvalds
c3a4844197 Add a xml file filter to the file open dialog
My home directory is a mess.  Don't show all the crap, just the stuff
that might be relevant.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-26 09:18:23 -07:00
Linus Torvalds
d81553e151 Add an 'About' dialog
It's really just about the logo, but whatever.  Dirk tells me I need one
of these in order to call it 1.0.  And I'm not going to fall into the
trap of thinking that 1.0 needs to be something polished, it just needs
to be working well enough..

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-24 15:48:13 -07:00
Linus Torvalds
f12684dcd7 Use 'gtk_dialog_get_content_area()' instead of accessing dialog directly
I'm reading gtk docs, and trying to clean things up a bit.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-24 15:26:37 -07:00
Linus Torvalds
bd0f274771 Show events on the dive profile
This is *really* ugly.  We really should just create some kind of widget
that when moused over will show the event.  Or something.  Rather than
putting text on top of other text: the events - when they happen - are
usually bunched together (PO2 warnings, max depth, fast ascent leading
to mandatory safety stop, you name it).

But at least this way we see that the data is there, even if we see it
in ugly ways.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 21:15:36 -07:00
Linus Torvalds
1e42dc10e5 Add cheesy "install" target
It just puts the subsurface binary in $(HOME)/bin.

.. and then the binary won't find the icon file, so this is really not
enough of an install to get it really working, but whatever.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 20:59:10 -07:00
Linus Torvalds
d9ca1b6fbf Drop surface events when reading from an XML file too
Remember those useless surface events that we ignore when we import a
dive from a dive computer? Yeah, they exist in the libdivelog xml files
too.  So ignore them when we see them there too.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 20:51:03 -07:00
Linus Torvalds
33b6d09000 Merge latitude and longitude data properly
When merging two identical dives and one of them has lat/long data, pick
it up correctly for the merged dive.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 20:50:07 -07:00
Linus Torvalds
a6f6e8d6ff Merge dive events correctly too
It's very similar to the sample merging.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 20:28:04 -07:00
Linus Torvalds
3a77eb8510 Start handling dive events
Parse them, save them, take them from libdivecomputer.

This doesn't merge them or show them in the profile yet, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 18:02:54 -07:00
Linus Torvalds
50c2bb7c71 Properly merge dive buddies and divemaster information
When we merge dives, we didn't merge these fields properly. Do it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 18:01:01 -07:00
Linus Torvalds
d344d15a90 Improve libdivecomputer event printout
Ignore surface events - they are meaningless anyway and just add noise.

Print out other events properly, including correct time offset etc.

We still don't actually *save* the events, but now it might be worth
doign so.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 16:55:55 -07:00
Linus Torvalds
d463cace5e Clean up event handling from libdivecomputer
This just moves the event handling out into its own helper function.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 16:45:28 -07:00
Linus Torvalds
c0adfdc41b Fix progress bar during libdivecomputer imports
As reported by Mauro Dreissig, the progress bar doesn't work and causes
a SIGSEGV due to a missing allocation.  The code broke when Dirk
separated out the GUI from the core code, and I hadn't tried
divecomputer downloads since.

Reported-by: Mauro Dreissig <mukadr@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 16:38:24 -07:00
Dirk Hohndel
d5c86ebe3d Add OTU to divelist
and change OTUs to be tracked as int, not double

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-22 16:29:49 -07:00
Dirk Hohndel
a93641b722 Calculate OTUs for every dive
The calculation assumes that the cylinderindex in each sample tells us
which PO2 the dive was breathing at that time. This needs to be verified
with dives where there is an actual gas switch.

No idea where to display them, yet. Far fewer people will care about this
than care about SAC - does this still rate a spot in the dive_list?
I guess I could make it part of the dive_info - but it's not editable.
It doesn't seem to fit with the equipment page (even though this is the
one editable field that is related - nitrox %)

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-22 16:26:38 -07:00
Linus Torvalds
15463fdeb2 Update the README a bit
Update for the current library situation, and notes about
libdivecomputer installation location.

And remove the "we don't interface directly with libdivecomputer", since
that is obviously not true any more.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 15:20:26 -07:00
Linus Torvalds
2d0267f0dd Merge branch 'alignment-change' of git://github.com/dirkhh/subsurface
* 'alignment-change' of git://github.com/dirkhh/subsurface:
  Minor change to the alignment of the divelist columns
2011-09-22 12:56:47 -07:00
Dirk Hohndel
99859dad54 Minor change to the alignment of the divelist columns
Just seems to look nicer this way. And actually implements consistent
alignment management for the columns to begin with.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2011-09-22 12:25:44 -07:00
Linus Torvalds
b2f0912ee5 Clean up library handling
.. and pick up libusb-1.0 automatically if it's installed.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 12:21:20 -07:00
Linus Torvalds
50fd8191f9 Put the location last in the dive list
The whole auto-expansion of an entry in the middle thing really doesn't
work very well in gtk. Give up on it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 11:02:28 -07:00
Linus Torvalds
4c113ee016 Put the default focus on the dive list at startup
This is some crazy stuff.  Apparently the only sane way to do this is by
hooking into the "realize" callback for the dive list widget.

Whatever. Dirk did the googling to figure this all out.

Suggested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 10:28:57 -07:00
Linus Torvalds
68b666f50a Fix up some minor whitespace issues
Dirk clearly isn't as anal as I am about pretty whitespace.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 08:21:32 -07:00