We need to close the dialog after applying what was downloaded, and we
should not try to delete the manager in case of cancel (as that reliably
causes the SIGSEGV.
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ok, so this sounds insane, but it fixes our currently broken sorting
of dive trips vs plain dives not in trips.
The reason for that is simple: the dive trips are sorted by date, but
that's column #0, and for plain dives is the dive number.
So currently the trip-vs-dive sorting looks at the date of the trip,
and compares that to the number of the dive. Since the date of the
trip is expressed as seconds-since-1970-in-UTC, unsurprisingly the
dive number is generally much smaller (even for some very avid divers
;), and so the plain dives end up sorting way at the bottom (or at the
top, if you do "oldest trips first"
Since the dive number *should* sort as the date, this stupid attached
patch just makes us return the dive date instead.
Now, there are other possible solutions to this:
- make the date of the dive be column 0, and make the dive number be column 1.
Quite frankly, while more logical for this particular problem, it
probably sucks as a solution. We do want to have a column we can sort
dives by that is date-based, but doesn't include trips. And while the
dive number *should* sort identically to the date one, the fact is
that you can have dives without any numbering, so it doesn't.
In contrast, all dives have dates, and sorting numbered dives by
date should still result in sane behavior (and if it doesn't, then the
insanity comes from the dive numbering, and odd sorting is the fault
of the user and indicative of a problem)
- We could possibly do something magical like sorting dives by number
when they are inside trips, or when no trips exist at all. But then
we'd sort by date when there are trips and the dive is outside the
trip. But quite frankly, that just sounds insane.
So on the whole, I don't love this patch, but it seems to be the least
confusing of the possibilities.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a typedef to the QFlags<QItemSelectionModel::SelectionFlag>.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit c4f06dc536 introduced Document
Mode on the MainTab QTabWidget. This doesn't look good on MacOSX.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the map selection works like normal selections do. Except we
don't do "ranged" selections (shift-click) for fairly obvious reasons.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Proper hide/show tooltip under ProfileGraphicsView. Events are not
properly handled and no custom tolltip status was stored.
Text are properly hidden now when tooltip is collapsed.
Reported-by: Tomaz Canabrava
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last open dives directory is stored in settings, so no need to walk through all
subdirectories all the time.
Signed-off-by: Helio Chissini de Castro <helio@kde.org>
This code removes the dive computer clicking on the trash icon,
the result is not saved on the XML, this will need a bit of
hacking from some of the older guys. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The GTK version seems to be bugged on this, since the dialog
doesn't save the dive computer nickname that I setted, but
the Qt version shows less dive-computers than the GTK one on the
same dive. I want somebody to do a quick review of my code too. :)
I also plan to remove the 'OK' and 'Cancel' buttom, they seem to
be overrated on this dialog - fairly uneeded.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a new dialog, Edit Divecomputer, it will currently only lists
the divecomputers that are used on the xml file. I used the same method
that the gtk version used, but only 2 divecomputers got visualized in the
dirk dive data. I'll assume that it's correct and will fix it in the next
couple of commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I guess we should support de-selecting dives this way too, but right now
the interfaces only do selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 4b405caa2c ("Clean up divelist dive selection") made the sort
model variable in headerClicked unused, so get rid of it. Fix a speling
eror closeby while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hoocked up the apply button - Didn't tested ( as I frankly don't know
what the expected result should be. ). but the app is not crashing, yey.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The XML is now being correctly parsed, Clicking on Help
will open the browser pointing to the api site, and clicking
on cancel will cancel the download.
Clicking on Apply still doesn't apply, but that's next. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added initial support for download dive info from subsurface web service,
the current code only downloads and output the xml downloaded in the debug
area. Now I need to parse things up and plug the unplugged stuff.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Don't call refreshDisplay() after preferences change. This strangely
somehow leads to a situation where I need to move the mouse over the dive
list before changes to the units are reflected.
When calling reload() do not force layout change / resort unless that is
the intention.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Getting closer to the way this should work. Adjusted the call to reload
to not switch back to tree view and resort (oops).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that this is the way this is supposed to be done - instead of
manually looking at what kind of click we get, Qt decides when to create
a context menu for us - this way things like the Windows Menu button
will work automagically.
As an example I also implemented the "remove dive from trip"
functionality, which exposes some other bugs (like the fact that the
dive that isn't part of a trip ends up being sorted at the very end of
the dive list).
This commit contains a "testSlot" implementation to remind me how to
figure out which dive / trip we are on.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some users might want to really see nothing but trips, others might want
to be able to keep the trip with the selected dive open.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we support "expand all" and "collapse" all. This still needs to
be restricted to only be shown when in trip / tree mode.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have a "selectDive()" method, let's just use it rather than
opencoding it. Similarly for "unselectDives()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These changes should be correct - but they still don't fix the problem
that after we click 'OK' on the preferences (regardless of whether any
changes were made), the first dive is set as current dive and shown in the
map window.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We'll want to enhance this: better logic for which dives are near the
selection, and it's probably best to have a "control-click" that adds
the dives to the selection rather than deselecting all the old ones.
But it's already useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not showing them at all was a little too blunt of an instrument. There
likely are dive spots with the same name at different resorts. And even
at the same resort you could have multiple morings for the same dive
site.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The check to only update the dive if there were already dives selected
before seems bogus. I'm sure I put it there for a reason but it seems
flat out wrong.
This gets triggered when you select a trip by clicking on the trip
header. In that case all dives get unselected (amount_selected = 0) and
then we try to select the first dive in the trip - which fails because
of this check.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a new widget, MinMaxAvgWidget, a simple widget
that displays values in 'min, max, avg' fashion.
it has a setMaximum, setAverage and setMinimum
methods, that is userful for setting the minimum,
maximum and average of stuff. Ah, it also shows
the minimum, maximum and average of things.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This function was supposed to take the default_prefs into account but
clearly wasn't.
Now it should be much more readable and maintainable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This helper wasn't called as intended - but because of the syncSettings
call which emits settingsChanged this only became visible for the
default_filename.
Next I need to clean up what is called for the settingsChanged signal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Things got broken. Again. We no longer kept track of the selected dives in
our structures which broke statistics.
This attempts to fix that, but appears to still have a bug when selecting
trips. Sometimes this results in 0 dives being selected according to our
data structures, while Qt happily shows all dives of the trip as seected.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code so far had completely ignored Metric / Imperial. Turning this
into a three way radio box seemed to make much more sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a feature that had been requested a few times in the past and when
debugging my "show only used gases" commit I realized that this would have
been extremely useful to have...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The keyboard movement wouldn't scroll to the newly changed selection.
Similarly, when sorting the dive list, we'd end up losing the currently
selected dive (and generally collapsing the currently exposed trips).
This adds the scrolling/exposing logic for those cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hardcoded position we previously had would make the text invisible
if a ceiling was drawn during the middle of the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The equipment tab will still show all defined gases, but the info for
the dive should only list the ones used.
Also change the name of the two gas related boxes to better reflect the
data that is shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply renaming all the elements with name conflict. None of these names
appear to be referenced anywhere so this seems like a rather odd thing to
happen - why doesn't the tool just rename them for me when I open and
close the file in designer? Or at least warn about it?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a helper function to determine the Subsurface data directory
(are we running from build directory? installed on Linux? installed on
Mac? - still need to add support for Windows). This same function is
then used by both the setup for Marble and for the help browser.
This assumes that the user-manual.html file has actually been built and
installed (which we don't do by default with the current Makefile).
Right now there are rendering issues with our manual in the help browser
widget - I'm sure this can be fixed...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a preliminary support for a manual display widget,
it's a very basic HTML text-browser, so it can have
hyperlinks, images and everything that a 1995 browser
has.
The long term plan is to subsittute this manual by
a more modern 'help' using QGraphicsView, that will
interact on the application level.
See #121
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
In commit b8d31d8534b ("Show ceilings for individual tissues") Robert
inadvertently broke the connection from dc_ceilings to red_ceilings and
also didn't correctly enable the checkbox for all_tissues when
calc_ceilings was already set in the preferences before the dialog was
created (and therefore the connection in the .ui file isn't run).
There's also a simplification / cleanup to the code deciding whether to
show all the tissues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think that displaying tissue loadings either as pressure or as
percentages is not very intuitive but that it makes much more sense when
translated to ceiling depths.
This change enables just that for the 16 tissues in our calculated ceiling
and visualizes this in the profile graph.
There is a checkbox in the preferences to turn this on. If enabled, all
tissues having non-trivial ceilings are also shown in the info box.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since I already put the center-allign label on the interface designer,
this was just dead code. getting rid of it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This moves the contents of the statistics tab to groupboxes,
so it's similar to what we had in GTK, but a bit prettier.
it's not what I plan to do in the final form, since I think
that a few 'min max avg' can be in it's own widget ( and maybe
a cute graph showing the values would also be nice. ) but its
an improvement from what we had.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
There was already a code for that on the maintab.cpp, but
since I moved all labels to groupboxes, the code stopped
working, and I tougth it'd better to kill the code since
it's faster and safer to use the interface builder for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a redesign-tryout of the info panel, it's not the way
that I want to do, actually - I think that textual representations
are quite boring, and we can do much better if we use better widgets,
for instance, a Calendar to show the date, a Termometer to show
the temperatures and so on. This version has a fixed layout, but
I'll most probably try to make it more dynamic in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Press CTRL+F and a line edit will appear, whenever you write on that will
be used as a filter against all columns. The results are maybe somewhat
surprising in trip mode, but when sorting by another column this shows
some potential.
Hit ESC to remove the filtering.
I need to find a better position to put the Widget, but it's a proof of
concept.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This small patch enable maintab to be in 'Document Mode', this means
basically that it size is smaller and there's not a line separating
the widget anymore, giving the user a more smooth experience.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Following Dirk's commit ae2c132, add support for custom google sat
data in a MacOSX app bundle
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The download already worked, but we didn't display the new dives. This
introduces a new slot for MainWindow that updates what is displayed in
Subsurface after files were imported.
With this change we can successfully download ONCE - but when trying to
download a second dive the dialog doesn't appear to get refreshed the
right way - the OK button doesn't appear to work anymore (Cancel however
does).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First try if Google Sat is already installed as a provider (and just use
it if it is). Then use the executable path to make an educated guess where
these files might be found as part of Subsurface.
We now install the necessary directory tree under
$(DESTDIR)/usr/share/subsurface/marbledata
Still far from perfect - but this should work at least on Linux. MacOS
will need a different modifier for the path and Windows I haven't even
thought about, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When (de)selecting columns, a the list of columns have a "show"
in front of every entry. We don't need that.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit beb4ed38f264 ("Add a "sort role" for sorting the dive list")
Linus forgot to add a case for the rating value.
Now all columns sort correctly.
With this I think we can close the bug...
Fixes#111
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tomaz convinced me (with help from Linus) that it might be a good idea
to go with the compacter "single line" case statements in some specific
instances where this makes the code much more compact and easier to
read.
While doing that I changed Linus' code to do 'retVal = ...; break;'
instead of just 'return ...;' - this is more consistent and makes
debugging a little easier.
And while doing all that, I also cleaned up divelistview.cpp a little bit.
And removed an unused variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the regression that I caused in the last commit,
where the selection was being correctly reestored from tree-to-table,
but it was incorrectly being restored from table-to-tree.
I also added a bit of speedup on the view while changing columns.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Sorting is now working as it should, changing
from table to tree, keeping the selection from
table to tree ( but there's a regression on
tree to table conversion, I'll try to fix it
in the following commit. ).
this commit also cleans a lot of boilerplate
code that I wrote to bypass a graphics bug,
that I seem to have correctly fixed in this
version.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Things are working as they should, but I hit on -probably- a Qt bug
that makes painting on the table view a bit weird ( it only updates
the painting by moving the mouse around ). I'll try to fake the
mouse movements in a couple of commits after this one.
There's also a few columns that are not being correctly sorted,
probably something to do with the SortRole.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
By default, sorting is done by the display role, but then we end up
sorting by the string we display, which is almost always the wrong thing.
So this adds a new "SORT_ROLE" that is used for sorting, and then the
data lookup can return the raw data we want to sort by.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set default zoom level only when at least one dive selected
and user have not changed it.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the red dc ceiling as preference option.
Hooked them all up together so the sub-preferences are enabled when the
master preference is set (for 3m and red ceiling).
Use the options in the profile plotting functions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial state needs to reflect the value of the checkbox. Once the
dialog is run, there is a signal/slot connection in the .ui file that
keeps things in sync.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The biggest problem here was that bool has different sizes in C and C++
code. So using this in a structure shared between the two sides wasn't a
smart idea.
Instead I went with 'short', but that caused problems with Qt being to
smart for its own good and not doing the right thing when dealing with
'boolean' settings and a short value. This may be something in the way I
implemented things (as I doubt that something this fundamental would be
broken) but the workaround implemented here (explicitly using 0 or 1
depending on the value of the boolean) seems to work.
I also decided to get rid of the confusion of where gflow/gfhigh are
floating point (0..1) and when they are integers (0..100). We now use
integers anywhere outside of deco.c.
I also applied some serious spelling corrections to the preferences
dialog's ui file.
Finally, this enables the code that selects which partial pressure graph
to show.
Still to do: font size, metric/imperial logic
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support for switching Tree / List
while clicking on a column header. This triggers
a sad-painting bug on the list - I guess I'll have
to fix it too. I'd apreciate some help on it, tougth.
next: keep the selection.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This code adds the possibility to make the DiveList behave
like a Tree or a List, depending on what layout is set.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This had been bugging me for a while - the label texts were all not
quite where I expected them to be. I think this looks much better now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial/metric super setting doesn't have any effect. But changing
the individual units now works and is tracked. And causes the display to
change after clicking "OK" (but not yet when clicking "Apply").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Several changes:
- split the reload of the DiveListView from the reload of the header
- don't include the column title in the name of the setting; the title
will change depending on the units and localization chosen by the user
- rename the slot that toggles visibility to make the code more readable
- use setCollumHidden() method to simplify the code
- don't save the width of hidden columns (as they would be saved as zero
width and can then no longer be enabled)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
My attempts to actually set the width of the columns with the
SizeHintRole all failed - so I gave up on that and am forcing things to
work by making the texts in the header somewhat longer and then resizing
to that. Definitely not what I wanted to do - but that plus reducing the
font size gives us a much more reasonable / compact look.
I really hope that someone else can explain to me how to get the
SizeHintRole to affect the width (and not just the height - that part
worked just fine) of a the cells in a column. Then we can replace this
hack by a much better solution (that won't fail if the translated strings
look different).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user very quickly switches between dives the zoom level sometimes
gets reset to be much more "zoomed out" (basically if you change dives
before Marble had time to zoom all the way in to the previous dive it will
keep whatever was the last zoom level of the animation - I'd consider that
a Marble bug).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the user doesn't need to move the two folders googlemaps and
googlesat around in the filesystem.
This only works if Subsurface is started from the build directory - it
doesn't work when Subsurface is installed (and it doesn't at all address
the need to install these files and bundle them as well).
I'd consider this a hack to show how the real solution should work.
There is one more part of this that is a hack: Marble no longer searches
its default data directory; the path we set replaces the Marble system
search path. Sadly, Marble doesn't support paths the way Unix thinks of
them with multiple directories, separated by ':'. So this means that
Marble no longer finds any of its default icons. For most of them that
seems fine as I don't think lacking the icons for "manned_landing",
"robotic_rover", "unmanned_hard_landing" or the various types of places of
worship that Marble supports is necessarily a big issues for Subsurface,
but at least the default_location icon seemed important. And since we now
need to carry our own, I replaced the boring circle with a tiny dive flag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
North is always up anyway. At least that's the way we've done it so far.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code converted the lat/lon to int before multiplying with
1,000,000 (in order to create udeg). Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "no dive location" message box was displayed above the marble
widget, which made the layout splitter move horizontally.
Made the message box as an overlay on the map instead.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk asked me to try to make it more modern, so I
used as a base, the Firefox preferences. currently
it saves / loads the preferences, and also smits
a signal 'preferencesChanged' that should be connected
to anything that uses preferenes, via the PreferencesDialog::intance()
object. In the future, I plan to make it have a signal / slot for each
member that changes.
I also moved the icons to a new folder this time, because the
amount of icons is now more than just two, and it was
becoming messy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This commit fixes three different things:
- a memory leak in WeightModel::setData()
- getSetting() calling strdup() on a QByteArray
- a possible usage of memory after deallocation
Here's an explanation of the last issue (taken from the mailing list, slightly
adapted):
toByteArray(), as well as others "toSomething()" methods, returns
a new object which the compiler allocates on the stack. The compiler
will consider it a temporary data, and destroy it on the next line. So,
when one does
char *text= value.toByteArray().data(); // line 1
if (strcmp(description, text)) { // line 2
the compiler creates a QByteArray on line 1, calls ::data() on it, which
returns a valid char *, and assigns its value to "text". So far, so
good. But before jumping to line 2, the compiler destroys the temporary
QByteArray, and this will in turn invoke the QByteArray destructor,
which will destroy the internal data. The result is that on line 2,
"text" will point to some memory which has already been freed.
One solution is to store a copy of the temporary QByteArray into a local
variable: the compiler will still destroy the temporary QByteArray it created,
but (thanks to the reference-counted data sharing built in QByteArray) now the
destructor will see that the data is referenced by another instance of
QByteArray (the local variable "ba") and will not free the internal data.
In this way, the internal data will be available until the local variable is
destroyed, which will happen at the end of the {} block where it is defined.
Please note that when one uses the data in the same line, one doesn't need to
worry about this issue. In fact,
text = strdup(value.toString().toUtf8().data());
works just fine.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't Save/Cancel/Save is less ambiguous than OK/Cancel/Save. Also
being slightly more verbose when creating the QMessageBox.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the more familiar Save/Undo instead of OK/reset
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now detect if a weight / cylinder with this description exists and if
not add it on the fly. We also remember the additional values (weight and
size / workingpressure) for new entries and take the values for these
fields into account when autocompleting.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very much analogous to the way cylinders are implemented.
That means that just like with cylinders, if the user enters a new type
and hits 'tab' before hitting 'enter', Subsurface will crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The .ui components were removed in commit 0c7a575f7b3b ("Rework on the
Equipment tab to make it look more Modern.") but the "automagic" slots
were still here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this we should have tank editing mostly done.
See #122
(it's not quite fixed, we need the equivalent code for weight systems)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
this is more a 'Well, this is how we do it' than an actuall
good commit. I'm probably using the wrong conversion paradigm
( none ) to convert the data from psi / bar and such, it
changes the model with wrong data.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I had to immprove the TankInfoModel with two new methods,
insertRows and setData, because the delegate used this
model to show what kind of Tanks we are offering.
Since the user can enter a new type of Tank, it's important
to add this tank to all lists using the delegates.
I Also added two new methods on the delegate itself,
to correctly shows the data, and set the data on the
model. This also will help dirk with a working example
on how to edit things while using a delegate.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The data is saved in the settings and the correct dive computer (vendor
and product) and device are picked when the download dialog is openend.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had been disabled by some redraw optimizations in commit
81406b80c6ec ("Fix loading a second dive, after the first file was
loaded."). We need to redraw the plot not only if the dive changed but
also if the selected divecomputer changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a fun one.
We only want to mark the divelist changed if the user actually changed
something. So we try really hard to compare what was entered with what was
there and only if it is different do we overwrite existing values and
record this as a change to the divelist.
An additional challenge here is the fact that the user needs to enter a
working pressure before they can enter a size (when in cuft mode). That is
not really intuitive. We work around this by assuming working pressure is
3000psi if a size is given in cuft - but then if the user changes the
working pressure, that changes the volume. Now going back and changing the
volume again does the trick. Or enter the working pressure FIRST and then
the volume...
This also changes the incorrect MAXPRESSURE to WORKINGPRESSURE and uses
the text WorkPress in English (Gtk code used MaxPress which was simply
wrong - this is just the design pressure or working pressure, not some
hard maximum. In fact, people quite commonly "overfill" these tanks.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now when you edit 'Type', a drop-down list will appear
and will enable you to choose from it's contents.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch adds basic editing functionality for Cylinders and Weigthsystems,
it still doesn't use delegates to show the data to the user in a better
way, and it does not take in consideration user preferences yet, but
it's a starting point.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This addresses two issues:
- the kMessageWidget did not word wrap, so if it was wider then the Globe
widget the Globe would expand (and divelist shrink) when the user
switched from a dive with location to a dive without location
- the code was also too aggressive removing and redrawing the message
widget when switching from dive to dive. with this change we only hide
the widget if the next dive has a location (and only show it if it isn't
shown already). We also hide the message if no dive is selected.
Reported-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, the Cylinders and Weigthsystems got a new Trash icon,
and the interface already intercepts the clicks ( on all
columns ) and send this to the 'remove' method on boch
models. On the model I'm just filtering the indexes that
are not 'DELETE' and creating a stub method to be filled
later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Note that this is a WIP and it does break functionality
- ie, not possible to add Equipments, but this will be
fixed in the next commit. Removed add / edit / remove
buttons, only a single '+' icon appears on the widget
now. the edit / delete will be done in place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Instead of passing pointers to GError around we pass just pointers to
error message texts around and use kMessageWidget to show those. Problem
is that right now the close button on that doesn't do a thing - so the
error stays around indefinitely. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also changed a bit the behavior on how the QSettings are managed,
till now, we used the QSettings constructor passing the name of the
software and the 'company', but this is now default - so there's no
need to pass anything by the QSettings contructor.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Ordering here is important - we can't resize the columns before they are
created. On the other hand this now means that we explicitly need to
expand to the first dive shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds support showing and for editing weigthsystems in the equipment tab,
so, now the two things that are missing are 'edit' and 'delete', wich are quite easy to do.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
i
Added the code to show the cylinders from a dive,
this code also already permits additions from the
interface, so the user can click 'add' and insert
what he wants there.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Small changes to the names of elements the divecomputer download UI and
very simplistic first stab at populating the device_data_t structure.
This is lacking lots of things
- it should remember the last vendor / product used
- it should figure out which device (mount point) to offer
- it needs proper error handling
But it's a step in the right direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses the QStringListModel to populate the items
of the QComboBoxes. I used a QHash to hold every Computer
of a particular Vendor. so, products[vendor] gives me
the full list of products from each vendor.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I think it's self explanatory - When user clicks on
'Cancel', the interface will wait for the trhead to quit
then will close itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is the skeleton code for a non-blocking ui-thread
It already creates the first-thread ( 'do not block the ui' )
and the second thread ('download from the dive computer')
We can in the future merge both in the same place - I didn't
want to do that now because the download function is written
in the libdivecomputer.c code, and I cant just transform that
to a QThread and use signals, so I used two threads for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This also removes some incorrect code from the clear() function for the
DiveInfo tab. Putting the readOnly() calls for the DiveNotes tab there was
wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This would be correct if the current selection code wasn't broken. Right
now we only add to our internal notion of what is selected - we never
deselect anything.
Once that is fixed, thestatistics should be correctly displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's not editable. And of course it continues to look like utter crap -
even more so now since this is left aligned and everything else is
centered.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also fixes a potential crash if no dives were loaded and the user
started editing the fields and clicked OK.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to do the right thing at exit (and also connects to more of
the menu actions to actually do something).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We want to give the user the option to 'cancel' and not exit the program,
to 'save' the file, or to say I'm 'OK' with losing the unsaved data.
This does NOT implement the actual save / save-as, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old names made sense in the initial model (where you'd click on the
edit button to start an edit). The new names seem much more natural given
what we do now.
Also a tiny code cleanup removing a redundant if statement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 7b00668b400b ("Improve the Dirk edit mode.") had what looks like an
"autocomplete" typo. This also stops us from changing the text on the
button that in this edit mode is always just the "OK" button.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pulled one more helper from statistics-gtk.c (but didn't modify the code
there to use it as that code is no longer being compiled).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dirk edit mode will be triggered as soon as the user
clicks on the field that he wants to edit. then he can
edit all fields, till he press ok / reset.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is just a for choosing the default edit style in the
future. I prefer the new edit style as the user is sure
what the hell is going on ( ie - if he chooses to edit,
he is editing, there's a message warning him that he is
editing and everything else is blocked till he finishes
editing. ) and the GTK version is 'edit whenever I feel like',
wich I think is more unsafe but dirk asked me to put an option
and let the others choose.
e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This makes the DiveList be similiar to the GTK one, comparing
the size of the text. The current code makes text on the
table be 30% smaller.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This seemed more logical than keeping it as "edit" and basically having to
hit "edit" a second time in order to save a change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to prevent loss of data, so if the user is editing something,
either cancel the edition or save it, to continue moving around on
the Dive List. - Only the dive list is affected, user can still
play with the globe and the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added option to edit the selected dive.
Now the user can click on 'Edit', and a nice box will
appear stating that the dive is in edit mode, and the user
can edit all of the 'Notes' tab fields, including the
rating. When the edition is finished, the user needs to
click on 'edit' again to mark as accepted, or in
reset to reset the fields to it's original state
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a major hack. Debian appears to be missing a necessary header file
for Marble to work correctly. We include this header file for now and hack
the Configure process to recognize that we are on Debian and force using
our local copy of the header file in that case.
This may be needed on Ubuntu as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Borrowed the code from KMessageWidget from Aurelian Gateau, Kdelibs,
to better show passive information and notifications. instead of a
popup blowing in the user's face, a nice, animated and well designed
widget will gracefully fade-in, show the notes, and fade out when
not needed anymore.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added the possibility to change the coordinates of a dive.
it's too intrusive in the moment, but it was a proof
of concept. so I'll commit as is and try to find a better
way to warn the user what's going on in the future, using
something less terrible than a popup exploding in his face.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The marble widget now shows the dive locations
and also will center on the dive that the user clicked
in the dive list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Adds preliminary support for marble widget, alongside with the
dive list. my idea is to let the view stay there at the left of the
dive list since we got a lot of unused space and a globe is something
nice to have - so you can look around where did you dived, the
dives near the one that's currectly selected, and so on.
I'm not using OpenStreetMaps right now, but a good thing about
marble is that it is skinnable - so for instance, a dive school
could present a dive lesson using subsurface with a globe from the
1600, to make it feel like 'history'.
This version will only compile to Qt4.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
When the application launches, the oldModel is null.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes loading a second dive-file after the first
one had been loaded. it simply clears some information and
makes sure that the current selected dive is invalid when
the file closes. I also did a bit of code cleanup on this one
to make things simpler in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On some maps, the lack of setting up the dc before plotting
the dive-computer nick caused a division by zero, breaking
the correct visualization of the dive.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The selected dive was being set to zero when the program
started, but zero is actually the first dive. There
were workarounds on the gtk code for that probably
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The weight management widget added 500 grams / 0.5 lbs
when a new entry was added.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A nonexisting temperature (mkelvin==0) was displayed as -273°C.
Weight was always displayed with an extra 500 grams/0.5 lbs.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cosmetic commit to clean up some of the annoying typos in qt-ui
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And rip out all the code that Dirk put there to do that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Figure out what is our first selected element (in case we start out from a
multiple selection) and then move to the next logical element. So the code
traverses an expanded tree (from a trip 'down' to its first dive or 'up'
to the last dive of the previous trip - and similar from a first dive in a
trip 'up' to its trip and from a last dive in a trip 'down' to the next
trip.
This does not take 'shift-cursor-up/down' into account (i.e. manual
selection extension). Instead with just cursor up and down a single dive
(or single trip) is selected.
My guess is that the code will make someone's eyes bleed. Be warned.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a user clicks on a trip, all the dives in a trip should be selected.
But if a user selects a range of dives that happens to have a trip header
in it, then only the range of dives should be selected (the trip header is
marked as 'selected' for visual consistency, even though not all dives in
this trip are selected).
This also changes the code to scrollTo the first selected dive instead of
just expanding the parent. This seems to give us a more pleasant visual
appearance (trying to keep the selected dive centered in the dive list)
and as a side effect no longer hides the first dive trip at program start
(before this change the first dive in the first trip would be the top
entry in the dive list, with its trip just out of sight above).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That threshold is of course ridiculous and arbitrary - but it seems like a
good assumption to make that anything below that is DEFINITELY not valid
data.
Because of the way the scene grows automatically in Qt, printing these
texts would squish the profile into one thin line.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The string we print is lame, but it keeps things consistent (and prevents
us from dereferencing functions in uninitialized objects).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A left click in the treeview header leads to a call to createIndex which
results in a null pointer dereference.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Align statistics tab labels as per infotab.
Amend helper function to show degree symbol for temp measurements.
Change order of member initialisation list to match order of decl
(ProfileGraphicsView::ProfileGraphicsView)
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The items are still being placed far from each other when
zooming in - I need a bit of help with the math for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Passing the alignment as int instead of float or double was actually a bug
as CENTER is defined as (-0.5) ...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Passing the alignment as int instead of float or double was actually a bug
as CENTER is defined as (-0.5) ...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't have a UI to set it, yet, so you have to manually set it in the
config file, but once you do that it works...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code enables Zoom in / Out with the Wheel,
and it also enables panning by moving the mouse around.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Created a default pen that has 'cosmetic' enabled,
A cosmetic line doesn't change it's width no matter
what zoom level we apply.
Also , changed everything that used a line to have
that as default pen instead.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Plot the numbers on the left of the profile.
It seems that everythign is being plotted -
But I can see that there are coordinate-errors on the
code. ( the GTK one plots some curves below of the
dive, but the Qt one is overlapping - probably the
way that I'm using the gc information)
Need to investigate a bit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch plots the PP text, but when I plotted I realized
that the gc.pi.mapp is being calculated wrong, probably
something went wrong on the calculations - it's comming
zered always. So, only one line & text is plotted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Left aligning text values looked wrong.
Use Qobject cast to filter labels from any other qobjects around and
set alignment. Doing this via Qt Designer would be tedious.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ctrl-C & Shift-Ctrl-C were used for next & prev DC which was considered
to be poor style.
Disable for now. Maybe replace with something else?
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
a few code was moved around, a macro that contained
the form of x ? : y; had to be rewritten to x ? x : y
since c++ doesn't allow ternarys without the middle operator.
The color-choosing for the Cylinder Pressure broke
on the Qt port - but it's a small issue.
I'm painting everyone as 'dark green' now, will
fix that later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Tomaz' code had a fixed height per tooltip item and some rather suspicious
logic how to position them (and how to size the surrounding box), based on
a fixed height in pixels per item - which of course fails if you use
larger fonts or multi line items.
This uses the bounding rects to correctly calculate the sizes and populates
the tooltip with the other dive data that we already had in a helper
function.
This also fixes a small formatting issue for gas change events.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the graphics_context part of the ProfileGraphicsView and remember
that the plot info is already a part of the graphics_context (we kept
passing around both of them in the Gtk code... pointless but a leftover
from before adding the pi to the gc...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When I changed the way that the tooltip box behaved,
I accidentaly 'ate' the mouseMoveEvent, it was being
used only to show tooltips instead of everything
that it should have. this simple patch fixes it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
A null pointer dereference occured after right click on a dive trip
because updateDiveInfo was called with dive == -1 causing get_dive(int)
to return null.
Wrap to avoid crash and clear dive info widget text labels.
[Dirk Hohndel: this is different from the fix I had committed earlier;
I decided to combine the ideas, clean this one up a bit
more and this is the result]
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed to spots where we would unconditionally dereference the dive
pointer.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Reported-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch changes the Event drawing so it can display tooltips. It is now
the responsibility of the item to show / hide a tooltip.
A bit of code-refactoring got on here too because I was using only
QGraphicsItem calls and I wanted to use a hover in / hover out event
to show / hide the tooltip.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The tooltips now can:
1 - be moved around the canvas
2 - dynamically expand / retreat when a new tooltip is added.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Establish some useful helpers and use them when updating the values.
One of the helpers (from statistics.c) puzzlingly doesn't link - so that's
ifdefed out.
Also had to re-arrange the settings reading code (it came too late) and to
extract the expanding code of the top dive from the settings reading code
(as it had no business being there to begin with).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Beautification of the triangles done, Tooltips are also displaying
Some rework on the code - don't know if dirk will accept, I'v changed
an if-else-if-else by a ternary operator, since it improves legibility
a little bit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are subtle differences, the Cairo version looks
prettier - but that's fixable. I did a small triangle
and a exclamation mark on it. maybe a gradient would
make a good difference there.
this item has a ItemIgnoresTransformation tag, so
scalling, rotating or zooming will not change it's
size.
The tooltips are not yet ported.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The plot_text function from the cairo-methods are now ported
on the qt version. this patch moves around some code since
quite defines are already used and I didn't want to reinvent
the whell.
Original code used varargs, but I prefered to change it
, so now it receives just a reference to a QString object
and the string must be constructed before sending,
using the .arg methods.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, this is what happens now:
Every tab should be populated from updateDiveInfo method, it will be
called whenever a new dive is selected
I'm already populating the 'notes' box to show how it can be done.
If you are unsure what's the name of anything, open the file maintab.ui on
the designer, click on the item and check its objectName, the access is
ui->objectName from here on.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add shortcuts to match GTK version for view menu items and the log menu
so that e.g. Ctrl+1 selects the list view.
Remove debug statements from the view functions. Leave in place for
functions with no obvious actions yet coded.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename various labels and text into clear pairs and reflect changes into
.cpp file.
To avoid clashes with names on other tabs use '..All..' to emphasise
that this page deals with an aggregate across the selected dives.
Re-format the statistics tab.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is missing the char * based settings (as I have no idea how to do
those) plus the map provider. Everything else should work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a few regressions, mostly because the text
is not being plotted yet and the background of some
of the curves are not being applied.
This is because QGrapdien is based on the coordinates
of the items that I wanna paint, but I'v setted a
QGradient that's global and doesn't take this into
consideration.
all curves are being plotted. in Small resolutions
they plot bad. but it's just a matter of redrawing
in the correct resolution.
the Line widths are being hardcoded now, on the cairo
version they weren't, this will need a bit of porting
too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This version already plots the dive-graph, with the
gradient and all that jazz. One thing that will be
easily spotted is that the size of the line is very
thick - easily changed, I'm just using the default.
As soon as everything is plotted correctly I'll
fix the lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The mean depth now is plotted correctly.
I wanted to do more stuff on this commit, but since
it required that a few things on profile.c got moved
to profile.h, commited to not have a huge blob for review.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first plotting method was removed from profile.c
to profilegraphics.cpp and some conversion ( almost 1 to 1 )
was made so that the code could work.
Since the code is big - this commit has just a part of it
working - it plots the grid. but already works for testing
the resizing of the window and Zooming ( unimplemented )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Started working on the Qt version of the Plot, initially
nothing is printed - but this is not a bad thing,
the program doesn't explodes too. :)
some work had to be done about the 'bool/gboolean' stuff
so I removed all gbooleans in the code that I'v encountered.
A new file was created ( profile.h ) so I could put the
signatures of helper methods that cairo used to call.
till now the code computes the max limits.
Next patch the first drawing will be made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The colors on colors.h were done to fill a special
struct by Subsurface - I removed that structure and
replaced the code that generated the map of colors
to a QMap. I know that this changes are not very
'welcomed', but C++ has issues on creating & initializing
complex static members, this was the best way that I could
think of.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This small patch adds a new class - ProfileGraphicsView
it's a QGraphicsView based class that will holds all
graphics-items for the plotting.
The setup is simple, just call ui->ListView->plot( dive ) ( that's
already a ProfileGraphicsView and magic will happen.
Since Im using a QGraphicsView , the size of the canvas doesn't
matter and I'm fixing it at 0,0,100,100. when a resize is done,
the resizeEvent will be called, fitting the scene's rectangle on
the view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This version already plots the dive-graph, with the
gradient and all that jazz. One thing that will be
easily spotted is that the size of the line is very
thick - easily changed, I'm just using the default.
As soon as everything is plotted correctly I'll
fix the lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The mean depth now is plotted correctly.
I wanted to do more stuff on this commit, but since
it required that a few things on profile.c got moved
to profile.h, commited to not have a huge blob for review.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The first plotting method was removed from profile.c
to profilegraphics.cpp and some conversion ( almost 1 to 1 )
was made so that the code could work.
Since the code is big - this commit has just a part of it
working - it plots the grid. but already works for testing
the resizing of the window and Zooming ( unimplemented )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Started working on the Qt version of the Plot, initially
nothing is printed - but this is not a bad thing,
the program doesn't explodes too. :)
some work had to be done about the 'bool/gboolean' stuff
so I removed all gbooleans in the code that I'v encountered.
A new file was created ( profile.h ) so I could put the
signatures of helper methods that cairo used to call.
till now the code computes the max limits.
Next patch the first drawing will be made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The colors on colors.h were done to fill a special
struct by Subsurface - I removed that structure and
replaced the code that generated the map of colors
to a QMap. I know that this changes are not very
'welcomed', but C++ has issues on creating & initializing
complex static members, this was the best way that I could
think of.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This small patch adds a new class - ProfileGraphicsView
it's a QGraphicsView based class that will holds all
graphics-items for the plotting.
The setup is simple, just call ui->ListView->plot( dive ) ( that's
already a ProfileGraphicsView and magic will happen.
Since Im using a QGraphicsView , the size of the canvas doesn't
matter and I'm fixing it at 0,0,100,100. when a resize is done,
the resizeEvent will be called, fitting the scene's rectangle on
the view.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Now it correctly uses the existing helper functions and keeps our idea of
the selection consistent.
There is a small behavioral change compared to the Gtk code. Range
selections no longer have the last dive clicked on as selected_dive but
instead the dive with the highest index that was selected. I don't think
that is a major issue for anyone.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clean up the formatting.
Distinguish between headings and value labels.
Tidy up text appearance (remove trailing ':')
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- rip all Gtk code from qt-gui.cpp
- don't compile Gtk specific files
- don't link against Gtk libraries
- don't compile modules we don't use at all (yet)
- use #if USE_GTK_UI on the remaining files to disable Gtk related parts
- disable the non-functional Cochran support while I'm at it
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Auto-detect on first start and keep in settings afterwards. So if the user
resizes them, Subsurface remembers the correct sizes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was written with massive hand-holding by Tomaz - actually, this was
mostly proposed via IRC by Tomaz and then implemented by me...
Right now because of the list-of-lists nature of the model we have the
small issue that every trip starts with a dark background dive, even if
the trip itself has a dark background.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code seems rather crude to me. I'm sure this could be done better.
This also makes the column alignment work again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the list and dives will work in the same way that the GTK
version does. The code got changed heavly because the old one
was just looking at the dives and didn't worked like a tree.
small adaptations on the list view and model delegates because
of the changes done on this model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The constructor letf the currentWeightsytem variable uninitialized.
Instead of creating the memory leak by malloc-ing the newWeightsystem in
the on_addWeight_clicked() function use a local variable instead and pass
its address around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
My first attempt to create a Qt dialog and to hook it up with the program.
Unsurprisingly this doesn't quite work as expected (i.e., the values I
enter aren't populated in the model), but it's a start...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename splitters and remove seemingly redundant empty splitter.
Use save/restoreState to save splitter sizes using QSettings.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use QSettings to provide persistent storage of settings. For example, we
store and restore the size of the MainWindow.
We use the organisation name hohndel.org and keep subsurface as the
application name.
A section is specified for things to do with the MainWindow; other
sections could be added e.g. for preferred units?
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the stars on the dive table I had to rework a bit my
StarRating widget, because it used a pixmap for each widget
that were created. Not it uses only 2 pixmaps: the active
and inactive ones.
A new file was created named modeldelegates(h, cpp) that
should hold all delegates of the models. For the GTK / C
folks, a 'Delegate' ia s way to bypass the default behavior
of the view that's displaying the data.
I also added the code to display the stars if no delegate
is set ( good for debugging. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Thanks to commit bdbfdcdfa0fb ('Ask Qt 4 to use the UTF-8 codec as the
"codec for C strings"') we no longer need the explicit UTF-8 conversion
when creating QStrings from char *.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just use the dive struct directly.
Suggested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveItem constructor had 13 variables. By passing it the full
dive we reduce that to 2.
[Dirk Hohndel: changed to use "struct dive *" instead of just "dive *"]
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have these data structures for a reason. They provide context
about the units used and prevent mistakes. And of course they
are used everywhere else so we should use them here, too.
This also tries to display some more data and make things look
a bit more like the Gtk version when it comes to alignment and
formatting.
My guess is this will make Qt developers' eyes bleed. My apologies.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Amend the DiveItem class to avoid float in favour of int. Add getters
which return display friendly QStrings reflecting user preferences for
(e.g.) depth.
Modify DiveTripModel to support controlled alignment by column; right
align for depth and duration.
Fix problems with utf8 encoding on rating stars, degree symbols and
O2 subscript.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A very simple to use widget:
StarWidget *stars = new StarWidget( windowParent);
stars->setMaximumStars(10);
stars->setCurrentStars( rand()%10);
stars->show();
connect(stars, SIGNAL(valueChanged(int)), someObj, SLOT(starsChangedValue(int)));
It currently uses a 'star.svg' file on the same folder as the binary.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moves the DiveTrip model related code to models.h
The DiveTripModel was implemented in three parts:
DiveTripModel.h
DiveTripModel.cpp
MainWindow.cpp (the code to populate the model)
This patch changes the DiveTripModel from it's original
implementation to the file models.h, wich should store
all models (Dirk requested the Qt developers to not create
2 files per class, but instead to use a file for functionality,
and data-models are one functionality.)
Besides that, this code cleans up a bit the style:
removed operator<< for .push_back, const references where they apply,
moved the internal DiveItem class to the .cpp since it should be visible
only to the DiveTripModel class, and redesigned the current interface of
the model to be identical of the GTK one (used the UTF8-star and 2
subscribed, for instance).
Amit (the creator of the original code) should comment here if it's ok
with my changes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add dives from dive_table to the model/view using the functions provided
to extract the dives.
We do not yet handle trips.
Formatting of date/time, depth and duration need attention.
Relies on earlier patch to delay Qt ui construction.
We should look at the signals we publish to link to other widgets etc..
[Dirk Hohndel: use for_each_dive -- clean up some white space]
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qt ui will need to read the dive_table to populate widgets with
dives. Gtk functionality in init_ui is required to parse the dives.
Split init_ui to allow parsing to proceed and complete before Qt ui
mainwindow constructor is called.
Play with qDebug()'s printf style (Thiago!)
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the code that will load and populate the Tank Info
ComboBox that`s used by the user to select the Cylinder
description.
Code curerntly implements more than the GTK version since
the GTK version of it was a plain-list, this one is a
table based model that can be used in ListViews ( like
we use now in the ComboBox ) but also in TableViews
( if there`s a need in the future to see everything
that`s catalogued in the Tank Info struct. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Qtr_ hack isn't needed as in commit 720fc15b2dcd ("Introduce
QApplication") had already made sure that we are using gettext.
I didn't revert the two commits as I wanted to keep the added header
comments and fix the tooling in the Makefile as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the use of operator<<() in a bunch of lines to do direct calls
this way the code will not scare non-c++ hearted people. :)
s
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This should wrap gettext nicely and replace the "_()" macros we use in C
code.
Also added comments to the top of all the new files.
Suggested-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1 - Open File already open files, it tries to not break the Gtk version,
but some methods on the GTK version still need to be called inside Qt
because the code is too tight-coupled.
2 - Close file already close files, same comments for the open file dialog
applies here.
3 - The code for adding new cylinders in the cylinder dialog is done,
already works and it's integrated with the system. There's a need to
implement the edit and delete now, but it will be easyer since I'm
starting to not get lost on the code.
4 - Some functions that were used to convert unities have been moved to
convert.h ( can be changed later, put there because it's easyer to
find something that converts in a convert.h =p ) because they were
static functions that operated in the GTK version but I need those
functions in the Qt version too.
[Dirk Hohndel: lots and lots of whitespace and coding style changes]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add files for dive list model/view implementation. Replace TableView
with the custom list view. Amendments to makefile to match.
Note: we don't yet handle trips and may want to add additional columns
to describe the dive.
A single, dummy dive is added to show how this works (get root; item is
child of root). Purely to illustrate - needs proper integration etc.
Amend member names for dive list view components
Various naming changes to conform to coding style. Required changes to
members (remove prefix) and methods (avoid clash with members).
Clean up indentation (swap spaces for tabs). Code for model/view was
written with a different editor which had different settings :-/
[Dirk Hohndel: minor whitespace cleanup]
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rename the 3 main widgets in the Qt mainwindow.
Wire view menu options to the setVisible methods of same.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Thiago wrote: qDebug("actionNew") also works. The current policy is to avoid
C++ style source code as much as possible.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Naming of QActions was inconsistent wrt abbreviations - fixed.
Add stub slots for each action relying on connect by name.
Add qDebug() message to allow people to check that menu items fire
slots; not really necessary but may provide some reassurance as we build
familiarity with Qt.
Some changes to display text for menu items (e.g. Tree becomes View
All).
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add some magic rules to detect which files need to be processed by the
moc or uic tools, as well as a way to manually specify exceptions.
Signed-off-by: Alberto Mardegan <mardy@users.sourceforge.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason, 'private slots:' causes a build error but private
Q_SLOTS: works.
The error was that 'slots' did not name a type and it appeared to be
insensitive to whether the Makefile rule for .moc was in its current
place or preceeded the rule for .cpp.
Add a slot using the connectByName idiom e.g. actionNew connects to slot
on_actionNew_triggered(). Use qDebug to show this fires if the menu
option is selected.
Above to demonstrate how to begin to link menu to code paths.
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Names for individual tab widgets were not specific and caused warnings
from UIC. Rename the individual widgets to reflect purpose.
[Dirk Hohndel: removed some of the hunks that appeared to be unintentional
changes not mentioned in the commit log]
Signed-off-by: Amit Chaudhuri <amit.k.chaudhuri@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on several commits from Tomaz - mingled together and mildly
extended by Dirk (mostly Makefile hacking).
All Qt UI related stuff should eventually move into the qt-ui directory.
So the Makefile rules for moc and uic have been adjusted accordingly.
The MainWindow class has been moved into its own file in qt-ui (but just
with a placeholder, the existing class has simply been ifdef'ed out in
qt-gui.cpp for the moment).
We still have a couple of Qt things in qt-gui.cpp in the main directory...
all this needs to move into the qt-ui directory and be built with separate
.h files. Right now we have the one-off Makefile rule to create the
qt-gui.moc file from the qt-gui.cpp file.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
