Prevent button press events from showing on the profile
graph when we import divesoft DLF files.
Reported-by: Marc Arndt
Signed-off-by: Marc Arndt <marc@marcarndt.com>
Print out partial derivatives of stop times with respect to
variation of depth and duratin of last manual segment.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This allows to go to much smaller granularity without severe
performance penalty. It should also increase performance for
long decompression times.
Currently this leads to missing cached tissue factors, the caching
has to be adopted to this.
Also, for the time being this breaks the bottom gas breaks feature.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
...rather than use a global variable and a macro.
This should be a no-op in preparation to allow planning
several versions of a dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Reportedly the case 2 corresponds to Perdix, so it might be that both
Petrel and Perdix use same model number (or the model is mistaken
before).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Instead of the (usually incorrect) text about insufficient privileges,
just mention a generic error and suggest that the user creates a
libdivecomputer log file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Jef made the OSTC interface be a generic 'dc_device_timesync()' and so
the old OSTC-specific code doesn't exist any more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simplify and fix prestation of weights. Due to the attempt to round
only the grams part (by just adding 50 to it, and truncating
afterwards) a weird effect was introduced. For example, a value
0.98 was presented as 0.10. Just replay the old logic, and see
what happens. Rewrote the logic to a simpler and better one.
fixes: #532
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
There is something with ndl / tts / temp in the Liberty DLF files. If
that bit is set, the values are bogus. There is something more to it
here which I haven't figured out.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
We always step forward 16 bytes, so make it a for loop so a continue
won't throw us into a eternal loop.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Back when I wrote this code I made a typo. This fixes it.
Reported-By: Alexander Gottwald <jugendtrainingtsck@gmail.com>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When I unified the sample pressures in commit 11a0c0cc70 ("Unify
sample pressure and o2pressure as pressure[2] array") I did all the
obvious conversions, including the conversion of the Poseidon txt file
import:
case POSEIDON_PRESSURE:
- sample->cylinderpressure.mbar = lrint(val * 1000);
+ sample->pressure[0].mbar = lrint(val * 1000);
break;
case POSEIDON_O2CYLINDER:
- sample->o2cylinderpressure.mbar = lrint(val * 1000);
+ sample->pressure[1].mbar = lrint(val * 1000);
break;
which was ObviouslyCorrect(tm).
But as so often is the case, obvious doesn't actually exist. The old
"o2cylinderpressure[]" model had an implicit sensor associated with it,
and that implicit sensor mapping wasn't obvious, and didn't get fixed.
It turns out that the way the Poseidon sensor mapping works, the O2
cylinder is cylinder 0, and the diluent cylinder is cylinder 1, so just
use the add_sample_pressure() helper to set both sensor index and
pressure value.
And since we now do all the sensor indexing right, we can also get rid
of some manual cylinder sample pressure code, because the generic dive
fixup will just DTRT. It used to screw up because the diluent sensor
number was wrong before, and the import code tried to work around that
by hand.
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
...even when not showing transitions, this makes the
first stop look more like a stop (since it does not include
several minutes of ascent).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Calling access() makes no sense at all on android, but this atleast
fixes a compilation error on ndk 15+.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
In the serial api for libdivecomputer is ok to send NULL as the int
pointer actual, if you dont't care about how many bytes that where
actually read or written.
This makes sure we don't crash if the ble backend where ever used with
such a backend.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
So the manual gas pressure case keeps showing issues, and in many ways it
really is a fairly complex thing, since it needs interpolation of the
intermediate pressures - possibly over several gas changes.
So you might have beginning and ending pressures for one cylinder, but
then use another cylinder in between.
We've historically got all the code to do this, but the big rewrite for
multiple cylinder pressures didn't get all the details right, and so
here's a few more fixes for the case that was shown by a dive by Robert
Helling. Hopefully we're approaching the old code situation, except now
with concurrent gas pressure handling support.
Reported-by: Robert Helling <helling@atdotde.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The core to plot manually entered pressures without any sample data did
the obvious thing: it ended the pressures at the end of the dive as
indicated by the last sample.
However, that obvious thing didn't actually work, because sometimes the
last sample is long long after the dive has actually ended, and we have
no plot_info data for that.
This depends on the dive computer used: most dive computers will not
report samples after the end (even if they may internally remember them
in case the diver just came up to the surface temporarily), but some
definitely do. The OSTC3 is a prime example of that.
Anyway, the code was fragile and wrong - even if passed a time past the
end of the plot_info data, "add_plot_pressure()" should just have
associated that with the last entry instead. Which also allows us to
simplify the whole endtime logic entirely, and just use INT_MAX for it.
Gaetan Bisson's test-case also showed another oddity: we would plot the
gas pressure even for cylinders that had no has use (ie beginning and
ending pressures were the same). That's kind of pointless in so many
ways. So limit the manual pressure population to cylinders that
actually have seen use.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Google Maps API V3 *does* require a key if one needs to generate
a lot of payed trafic and monitor said trafic, otherwise it doesn't:
https://stackoverflow.com/a/8785844
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The creation of a cloud account from mobile was broken. This fixes
it. Basically, we need to go online for a moment, and setup a correct
local and remote repo for the cloud storage.
Tested for the following scenarios: 1) inital account creation
including PIN handling from mobile, from a clean install .
2) open an already validated cloud account from a clean install.
3) open no-cloud style local account.
4) Switch between 2 already validated could accounts.
5) Try to create a cloud account without data connection.
Notice that scenario 4) does not work perfectly. A restart of
the app is needed to see the new logbook. So that is to be fixed.
Scenario 5) seems a non realistic corner case. This does not work
in a gracefull way. The user needs to remove the app, install it
again, and retry with data connection.
Further notice this is backgroud/core processing only. So no QML UI
changes as proposed (for example) bij Davide.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
strstr is a case sensitive compare and the string reported from
libgit2 reads "reference" and not "Reference". Further investigation
reveals commit 909d5494368a0080 of libgit2. Here, the change is
made from Reference to reference, breaking our rather poor way
of detecting something from an error string. So, to be future-proof
to more libgit2 oddities, it might be wise to use strcasestr
in this situation. But this seems a not fully supported variant of
strstr, so leave it at this point.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The other pressure sensors were disabled on import because we didn't use
to handle multiple sensors well at all.
Now it "JustWorks(tm)".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"If it hasn't been tested, it doesn't work".
All my testing of the multiple sensor pressures have been with some
reasonably "interesting" dives: they actually *have* sensor pressures.
But that test coverage means that I missed the truly trivial case of
just having manual pressures for a single cylinder.
Because there's only a single cylinder, it doesn't have any cylinder
changes, and because there were no cylinder changes, it never filled in
the use range for that cylinder.
So then it never showed the pressure profile at all.
Duh.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The momentary SAC rate got broken by the multiple ressure handling too,
and always used just the first cylinder.
This uses the new "get_gasmix()" helper to see what you're breathing,
and will do the SAC rate over all the cylinders that contain that gas.
So it should now DTRT even for sidemount diving (assuming you had the
same gas in the sidemount cylinders).
NOTE! We could just do the SAC rate over *all* the gases you have
pressures for, and maybe that's the right thing to do. The ones you are
not breating from shouldn't have their pressure change. But maybe some
people add their drysuit argon gas to the gas list?
So this may need more work, but it's a step in the right direction.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit e1b880f4 "Profile support for multiple concurrent pressure
sensors" I had mindlessly hacked away at some of the sensor lookups from
the plot entries to make it all build, and forgotten about my butchery.
Thankfully Jan and Davide noticed in their multi-cylinder deco dives
that the deco calculations were no longer correct.
This uses the newly introduced "get_gasmix()" helper to look up the
currently breathing gasmix, and fixes the deco calculations.
Reported-and-tested-by: Jan Mulder <jlmulder@xs4all.nl>
Reported-by: Davide DB <dbdavide@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have a few places that used to get the gasmix by looking at the
sensor index in the plot data, which really doesn't work any more.
To make it easier for those users to convert to the new world order,
this adds a "get_gasmix()" function. The gasmix function takes as its
argument the dive, the dive computer, and the time.
In addition, for good performance (to avoid looping over the event list
over and over and over again) it maintains a pointer to the next gas
switch event, and the previous gas. Those need to be initialized to
NULL by the caller, so the standard use-case pattern basically looks
like this:
struct gasmix *gasmix = NULL;
struct event *ev = NULL;
loop over samples or plot events in increasing time order: {
...
gasmix = get_gasmix(dive, dc, time, &ev, gasmix);
...
}
and then you can see what the currently breathing gas is at that time.
If for some reason you need to walk backwards in time, you can just pass
in a NULL gasmix again, which will reset the event iterator (at the cost
of now having to walk all the events again).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finally handles multiple cylinder pressures, both overlapping and
consecutive, and it seems to work on the nasty cases I've thrown at it.
Want to just track five different cylinders all at once, without any
pesky gas switch events? Sure, you can do that. It will show five
different gas pressures for your five cylinders, and they will go down
as you breathe down the cylinders.
I obviously don't have any real data for that case, but I do have a test
file with five actual cylinders that all have samples over the whole
course of the dive. The end result looks messy as hell, but what did
you expect?
HOWEVER.
The only way to do this sanely was
- actually make the "struct plot_info" have all the cylinder pressures
(so no "sensor index and pressure" - every cylinder has a pressure for
every plot info entry)
This obviously makes the plot_info much bigger. We used to have
MAX_CYLINDERS be a fairly generous 8, which seems sane. The planning
code made that 8 be 20. That seems questionable. But whatever.
The good news is that the plot-info should hopefully get freed, and
only be allocated one dive at a time, so the fact that it is big and
nasty shouldn't be a scaling issue, though.
- the "populate_pressure_information()" function had to be rewritten
quite a bit. The good news is that it's actually simpler now, although
I would not go so far as to really call it simple. It's still
complicated and suble, but now it explicitly just does one cylinder at
a time.
It *used* to have this insanely complicated "keep track of the pressure
ranges for every cylinder at once". I just couldn't stand that model
and keep my sanity, so it now just tracks one cylinder at a time, and
doesn't have an array of live data, instead the caller will just call
it for each cylinder.
- get rid of some of our hackier stuff, like the code that populates the
plot_info data code with the currently selected cylinder number, and
clears out any other pressures. That obviously does *not* work when you
may not have a single primary cylinder any more.
Now, the above sounds like all good things. Yeah, it mostly is.
BUT.
There's a few big downsides from the above:
- there's no sane way to do this as a series of small changes.
The change to make the plot_info take an array of cylinder pressures
rather than the sensor+pressure model really isn't amenable to "fix up
one use at a time". When you switch over to the new data structure
model, you have to switch over to the new way of populating the
pressure ranges. The two just go hand in hand.
- Some of our code *depended* on the "sensor+pressure" model. I fixed all
the ones I could sanely fix. There was one particular case that I just
couldn't sanely fix, and I didn't care enough about it to do something
insane.
So the only _known_ breakage is the "TankItem" profile widget. That's
the bar at the bottom of the profile that shows which cylinder is in
use right now. You'd think that would be trivial to fix up, and yes it
would be - I could just use the regular model of
firstcyl = explicit_first_cylinder(dive, dc)
.. then iterate over the gas change events to see the others ..
but the problem with the "TankItem" widget is that it does its own
model, and it has thrown away the dive and the dive computer
information. It just doesn't even know. It only knows what cylinders
there are, and the plot_info. And it just used to look at the sensor
number in the plot_info, and be done with that. That number no longer
exists.
- I have tested it, and I think the code is better, but hey, it's a
fairly large patch to some of the more complex code in our code base.
That "interpolate missing pressure fields" code really isn't pretty. It
may be prettier, but..
Anyway, without further ado, here's the patch. No sign-off yet, because I
do think people should look and comment. But I think the patch is fine,
and I'll fix anythign that anybody can find, *except* for that TankItem
thing that I will refuse to touch. That class is ugly. It needs to have
access to the actual dive.
Note how it actually does remove more lines than it adds, and that's
despite added comments etc. The code really is simpler, but there may be
cases in there that need more work.
Known missing pieces that don't currently take advantage of concurrent
cylinder pressure data:
- the momentary SAC rate coloring for dives will need more work
- dive merging (but we expect to generally normally not merge dive
computers, which is the main source of sensor data)
- actually taking advantage of different sensor data from different
dive computers
But most of all: Testing. Lots and lots of testing to find all the
corner cases.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does both the XML and the git save format, because the changes
really are the same, even if the actual format differs in some details.
See how the two "save_samples()" routines both do the same basic setup,
for example.
This is fairly straightforward, with the possible exception of the odd
sensor = sample->sensor[0];
default in the git pressure loading code.
That line just means that if we do *not* have an explicit cylinder index
for the pressure reading, we will always end up filling in the new
pressure as the first pressure (because the cylinder index will match the
first sensor slot).
So that makes the "add_sample_pressure()" case always do the same thing it
used to do for the legacy case: fill in the first slot. The actual sensor
index may later change, since the legacy format has a "sensor=X" key value
pair that sets the sensor, but it will also use the first sensor slot,
making it all do exactly what it used to do.
And on the other hand, if we're loading new-style data with cylinder
pressure and sensor index together, we just end up using the new semantics
for add_sample_pressure(), which tries to keep the same slot for the same
sensor, but does the right thing if we already have other pressure values.
The XML code has no such issues at all, since it can't share the cases
anyway, and we need to have different node names for the different sensor
values and cannot just have multiple "pressure" entries. Have I mentioned
how much I despise XML lately?
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had a "add_sample_pressure()" helper functions that was local to just
the libdivecomputer downloading code, but it really is applicable to
pretty much any code that adds cylinder pressure data to a sample.
Also add another helper: "legacy_format_o2pressures()" which checks the
sample data to see if we can use the legacy format, and returns the o2
pressure sensor to use for that legacy format.
Because both the XML and the git save format will need a way to save the
compatible old-style information, when possible, but save an extended
format for when we have data from multiple concurrent sensors.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Independ of the settings, the threshold to reset the GPS data was
hard coded to 5 minutes. Now, honour the entered (and updated during
a session) time to refresh the GPS data in the location service.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This tries to sanely handle the case of a dive computer reporting
multiple cylinder pressures concurrently.
NOTE! There are various "interesting" situations that this whole issue
brings up:
- some dive computers may report more cylinder pressures than we have
slots for.
Currently we will drop such pressures on the floor if they come for
the same sample, but if they end up being spread across multiple
samples we will end up re-using the slots with different sensor
indexes.
That kind of slot re-use may or may not end up confusing other
subsurface logic - for example, make things believe there was a
cylidner change event.
- some dive computers might send only one sample at a time, but switch
*which* sample they send on a gas switch event. If they also report
the correct sensor number, we'll now start reporting that pressure in
the second slot.
This should all be fine, and is the RightThing(tm) to do, but is
different from what we used to do when we only ever used a single
slot.
- When people actually use multiple sensors, our old save format will
start to need fixing. Right now our save format comes from the CCR
model where the second sensor was always the Oxygen sensor.
We save that pressure fine (except we save it as "o2pressure" - just
an odd historical naming artifact), but we do *not* save the actual
sensor index, because in our traditional format that was always
implicit in the data ("it's the oxygen cylinder").
so while this code hopefully makes our libdivecomputer download do the
right thing, there *will* be further fallout from having multiple
cylinder pressure sensors. We're not done yet.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
good (1) = 5
medium (2) = 3
bad (3) = 1
There seems also to be 0 used in the log, even though it is not
mentioned in the valid selections. This is not giving any stars for this
option...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Note that I have not been able to do a positive test for this due to
lack of CCR sample data. But at least OC dives are now categorized
correctly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
"cur_dc" may be NULL when the XML source isn't a subsurface XML file,
and xml parsing is supposed to use "get_dc()" to pick a dive computer
when the nesting of the XML may not be proper.
Now, XML sources that don't have the proper dive computer nesting
markers generally also do not end up having the extra-data string
information, but one example of this is the simple XML that the
libdivecomputer 'dctool' program generates.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our "get_has_used()" helper only filled in gas usage for cylinders that
had a gas change event associated with them. That works really badly
for things like CCR, but also simply for cases where the dive computer
wasn't necessarily explicitly notified about usage, like sidemount
diving etc.
Just remove the logic. If some use ends up particularly wanting to
ignore some cylinder, they can always do it in the caller instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of how we traditionally did things, the "o2pressure" parsing
depends on implicitly setting the sensor index to the last cylinder that
was marked as being used for oxygen.
We also always defaulted the primary sensor (which is used for the
diluent tank for CCR) to cylinder 0, but that doesn't work when the
oxygen tank is cylinder 0.
This gets that right at file loading time, and unifies the xml and git
sample parsing to make them match. The new defaults are:
- unless anything else is explicitly specified, the primary sensor is
associated with the first tank, and the secondary sensor is
associated with the second tank
- if we're a CCR dive, and have an explicit oxygen tank, we associate
the secondary sensor with that oxygen cylinder. The primary sensor
will be switched over to the second cylinder if the oxygen cylinder
is the first one.
This may sound backwards, but matches our traditional behavior where
the O2 pressure was the secondary pressure.
This is definitely not pretty, but it gets our historical files working
right, and is at least reasonably sensible.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we load sample data from a git save-file, we always default to
using the state from the previous sample (except for the special case of
cylinder pressure where an empty value does not mean "same", but
"interpolate", see core/load-git.c: new_sample()).
But the corollary to that is that it's always redundant to save sample
data that hasn't changed since the previous sample.
For some reason, the rbt, bearing and heartrate sample data didn't
follow that rule, and instead saved with lots of extra reduncancy.
(The alternative would be to clear those samples at load time, and make
them act like the pressure data, but it would appear that all these
three values may as well just have the normal "if no change, don't save
them" semantics).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently carry two pressures around for all the samples and plot
info, but the second pressure is reserved for CCR dives as the O2
cylinder pressure.
That's kind of annoying when we *could* use it for regular sidemount
dives as the secondary pressure.
So start prepping for that instead: don't make it "pressure" and
"o2pressure", make it just be an array of two pressure values.
NOTE! This is purely mindless prepwork. It literally just does a
search-and-replace, keeping the exact same semantics, so "pressure[1]"
is still just O2 pressure.
But at some future date, we can now start using it for a second sensor
value for sidemount instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some Petrel 2 computers are dual stack. We need to list the Petrel here as well
since the Petrel 2 actually identifies itself via BT/BLE as Petrel and we can't
tell them appart until after we started a download.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is both correct (many Perdix support BLE) and necessary
as the Perdix AI identifies itself (sadly) as Perdix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The adapted define was confusingly wrong. Apparently, the BUFSIZ
define was coming from some include file, and was dependent on
platform (Linux 8K, Andorid 1K). Simple rewrite to a new define
and a proper value for both Linux and Android. If 4K is big
enhough, is a little uncertain, as its depends on the read
behavior of all libdivecomputer parsers using this serial
BLE interface.
The buffer size needed (on read, as that is the most prominent
direction when interfacing with DCs) is (most likely) 2x the
maximum block the libdc parsers request at once. I did not
study all parsers, but the Shearwater parser request 20 bytes
at once (we know that from the 1 packet at the time read, we
had before). The OSTC parser request 1K blocks for data
that is longer than 1K (like profiles, header tables).
The 1K we had on Android was working for Shearwater,
Eon Steel, but not for OSTC,as its reads 1K at the time
at max, and overflowing the buffer.
So 32k or 64k seems way to big (as in, much bigger than
any libdc read).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
No idea why this now shows up as an error in the iOS build.
We need to refer to the typedef, not the underlying struct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently, OSTC Sport has a BT name like OSTCs<space><serial>.
Small code addition to detect this properly. As long as we
do not have an improved way of detection. Notice that most of
the HWs use the same BT hardware, so simple detection on offered
services will not work.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See also b409e9fc91 and 709c1df2af. The OSTC parser
cannot handle reads of single 20 byte BLE packages in serial mode.
Instead of doing a deeper down agressive read, we can read on
the serial level more subtile. As the parser is requesting a
specific number of bytes, we just read that number of bytes and
return them. As the 20 byte BLE packets do (obviously) not
align with the reading requirement of the libdc parser, a little
housekeeing needs to be done in between individual reads.
CAVEAT 1: In contradiction to 709c1df2af, this is supposed to
work for all parsers that properly specify the needed bytes to fetch.
CAVEAT 2: All above tested on Linux Desktop with bluez stack.
Subsurface mobile is step 2.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commit 709c1df2af introduced a hard blocking read for BLE devices.
This did break BLE reads from multiple DCs, and (in hindsight) was not
a correct implementation. It would require, for example, dynamic
read buffers as especially profile data grows with dive time, and
in addition, and more importantly, also the OSTC libdc parser cannot
process the entire profile of a dive at once (but likes to receive
it in 1K blocks). So, basically, it introduced issues, and did not
solve the OSTC read.
This commit reverts this hard blocking read (and as such will break
OSTC BLE reads). But it enables removal of the special cases for
the EON Steel and G2.
A next commit will solve OSTC BLE reads.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Handle credits. Do not just ask for maximum credits all the time as this
will stop the download. Also do not let the credits go back to 0 (while
this might work, this is not tested). Getting back the 0 credits stops
the download, and even when it can be restarted, it is less efficient
(and not needed). Notice also that it takes some time before a grant
request is honoured. During testing I saw reception of up to 25 packets
between request and grant. So a lower bound for the request of
32 packets seems resonable.
One aspect the Telit/Stollmann TIO puzzeled me. Sections 4.1 and 4.2
both talk about credits, but my hyphothesis is that there are two
credits counters in play. One for traffic either way. This commit
only deals with credits granted by Subsurface to the OSTC to send
data. Credits granted by the OSTC to allow Subsurface to send new
commands is NOT part of this commit, and is seemingly not needed
in our scenario. As we only send new commands to the OSTC when
a previous one is finished (per HW's interface spec), the OSTC
does not run out of credits to receive commands.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
While it's nice to have the numerical model in the logfile,
on the screen the user wants to see the dive computer product
name. And none of those hex numbers that make the text so long
that it becomes useless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit ed43b5dced ("Add
support for tank sensor battery for Perdix AI") since a much better
solution to get to that information has been implemented in
libdivecomputer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use a little script to create the code snippet. This script in return
relies on comments that were added to the latest libdivecomputer source
(in the Subsurface-branch).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit awkward with a VENDOR event - but at the time the strings
are generated, we don't have the information, yet, that we need to
determine these values (we need the last sample parsed, but the strings
are created as part of the dive headers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
subsurface/core/divesitehelpers.cpp: In member function 'virtual void ReverseGeoLookupThread::run()':
subsurface/core/divesitehelpers.cpp:128:12: error: invalid use of incomplete type 'class QDebug'
qDebug() << "no reverse geo lookup; geonames returned\n" << fullReply;
^
Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
The current BLE read reads just one 20 bype packet. That packet size is set
in ble_serial_ops, so, without being able to test on anything other than
a OSTC3, I assume that this holds for other BLE DCs too. So, I think is
is weird that those interfaces work with the current read() of just one
packet at the time.
As we need a blocking read (at least for the OSTC parser), just read all
data that is available on the input. And when we think we are done, give
the QtEventloop control to see if there is more, and process that incoming
data as well. All this basically implements a blocking read.
CAVEAT 1: This might break the reading from the currently working BLE devices.
CAVEAT 2: With this, I still cannot read the OSTC3 completely. For
developers familiar with the HW transfer protocol: it just stops while
reading the first full dive (header + profile) command 0x66, despite
correctly reading about 5Kb of data before. For some
reason, I do not believe that this is related to this commit.
CAVEAT 3: All above tested on Linux Desktop with bluez stack, and
confirmed NOT to work on Android 7.1.2, build with Qt 5.9.0, And
yes, I know 5.9.1 recommended.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
1) As the OSTC sends data to the BLE central role (the SSRF client) over 2
characteristics, we have to filter the administrative credit data from
the actual dive data that it received. The characteristcStateChanged
function is adapted for this.
2) We have to be sure that the Terminal Client I/O is fully defined during
opening the connecton to the OSTC. From 6d505b24f0c15 we can see
that the last step in setting up the terminal interface is the grant
of credits. This is done by writing to the proper (the only one, with
id = 0x2902) descriptor of the credits RX characteristic. The here
added slot is triggered on the completion of write of credits marking
the final stage of the setup.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The current "select the correct BLE service to talk to" is flawed.
It assumes that the first found non-standard UUID is the right one
and apparently it is for some DCs. But not for the HW devices.
The HW devices use a "standard" ie. approved by the Bluetooth
SIG, controller, that comes with a UUID that our code currently
considers standard so not to be the right one.
This (simple) commit selects the right service for HW. The UUID
is hard coded, and this is ok, because it is tied to the hardware
used by HW. Futher, it does not change anything for other BLE
devices.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This initalizes the Terminal I/O client as described in paragraph 3 of
http://www.telit.com/fileadmin/user_upload/products/Downloads/sr-rf/BlueMod/TIO_Implementation_Guide_r04.pdf
This is for all Heinrichs Weikamp computers, that use referenced BT/BLE hardware
module from Telit Wireless Solutions (Formerly Stollmann E+V GmbH). The 16 bit
UUID 0xFEFB (or a derived 128 bit UUID starting with 0x0000FEFB is a
clear indication that the OSTC is equipped with this BT/BLE hardware.
Furthermore, most devices equipped with this BT/BLE hardware have BT addresses
starting with 00:80:25:...
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This seems really long, but one user appeared to get a response after
almost 10 seconds. So going with 12 for some margin of error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should be much more robust in getting us the correct Bluetooth address
and the correct vendor / product for our selection.
When we pick a paired device, we extract the address right from its name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This really doesn't help us as we can't associate a vendor/product with
devices we don't recognize, so we can't download from them, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For DCs that support both BT and LE, allow the user to connect to both
interface layers. Maybe not usefull in the end (as BT is faster
than LE), but as long as BT on Android is WIP is it very useful
to be able to connect to the interface layer we like.
Just add it to the Paired Devices list twice. The normal way, and
the LE: prepend way.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This really needs to be done differently - we need a structured way
to associate a transport mechanism with each of the dive computers
we support.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now we have a quirk for Shearwater devices to set the random
address flag, but also to handle the differences at read/write time.
With this, I can finally download from both the Suunto EON Steel and the
Shearwater Perdix AI with the same binary.
It's not *pretty*, but it works.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I hate changing the IO interfaces this often, but when I converted the
custom serial interface to the more generic custom IO interface, I
intentionally left the legacy serial operations alone, because I didn't
want to change something I didn't care about.
But it turns out that leaving them with the old calling convention
caused extra problems when converting the bluetooth serial code to have
the BLE GATT packet fall-back, which requires mixing two kinds of
operations.
Also, the packet_open() routine was passed a copy of the 'dc_context_t',
which makes it possible to update the 'dc_custom_io_t' field on the fly
at open time. That makes a lot of chaining operations much simpler,
since now you can chain the 'custom_io_t' at open time and then
libdivecomputer will automatically call the new routines instead of the
old ones.
That dc_context_t availability gets rid of all the
if (device && device->ops)
return device->ops->serial_xyz(..);
hackery inside the rfcomm routines - now we can just at open time do a simple
dc_context_set_custom_io(context, &ble_serial_ops);
to switch things over to the BLE version of the serial code instead.
Finally, SSRF_CUSTOM_IO v2 added an opaque "dc_user_device_t" pointer
argument to the custom_io descriptor, which gets filled in as the
custom_io is registered with the download context. Note that unlike
most opaque pointers, this one is opaque to *libdivecomputer*, and the
type is supposed to be supplied by the user.
We define the "dc_user_device_t" as our old "struct device_data_t",
making it "struct user_device_t" instead. That means that the IO
routines now get passed the device info showing what device they are
supposed to download for.
That, in turn, means that now our BLE GATT open code can take the device
type it opens for into account if it wants to. And it will want to,
since the rules for Shearwater are different from the rules for Suunto,
for example.
NOTE! Because of the interface change with libdivecomputer, this will
need a flag-day again where libdivecomputer and subsurface are updated
together. It may not be the last time, either.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We rather use wait in combination with spinning the event loop.
Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a device has more than one service the order of service discovery
determined the selection of the service that we intend to interact
with. This assumption is not accurate and is even platform dependent.
Thinking ahead, it is likely that some devices may require us to keep
track and interact with multiple services at the time.
The new logic still suffers from the fact that there is no way
to select the correct service for interaction. This will require
higher level stack changes.
Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
toUtf8() creates a temporary char* representation which is assigned to
uuid. As soon the object created by toUtf8() gets destroyed, the uuid
pointer points to releases memory.
The intention is to check that we don't have one of the standard
16bit Bluetooth uuids. That's the purpose of QBluetoothUuid::toUInt16().
Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is somewhat hacky, but it allows at least the Shearwater
libdivecomputer backend to continue to treat even the BLE GATT model as
just a serial protocol.
What it does is create a special "emulate serial behavior over the
packetized BLE protocol" helper layer, that qtserialbluetooth falls back
on when rfcomm is not available.
NOTE! This still requires some BLE packet code changes to work with the
odd way that Shearwater sets up their BLE GATT communication. So note
that no further patches are necessary to *libdivecomputer*, but some
updates are needed for the subsurface qt-ble.cpp code.
I have those updates in my tree, and this code is all tested on my
Perdix AI, but those patches are currently too ugly to commit as-is.
I've cleaned up this "fake serial" code sufficiently, that cleanup comes
next.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems a bit odd, but it actually has three different reasons for it:
- It's a visual indication of BT LE mode for users
- the rfcomm code only works with legacy BT support, and if we scan a
device that only does LE, we want the custom serial code to instead
automatically fall back on a "emulate serial over LE packets" model.
- we want rfcomm to remain the default for devices that do both legacy
BT _and_ LE, but we want people to have the ability to override the
choice manually. They can now do so by just editing the address
field and adding the "LE:" prefix manually, and it automatically gets
saved for next time.
So while a bit hacky, it's actually a very convenient model that not
only works automatically, but allows the manual override.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is some very early and hacky code to be able to access BLE-enabled
dive computers that use the GATT protocol to send packets back and forth
(which seems to be pretty much all of them: a vendor-specific GATT
service with a write characteristic and a notification characteristic
for reading).
For testing only. But it does successfully let me download dives from
my EON Steel and my Scubapro G2.
NOTE! There are several very hacky pieces in here, including just
"knowing" that the write characteristic is the first one, and the
notification characteristic is second. The code should actually check
the properties rather than have those kinds of hardcoded assumptions.
It also checks "vendor specific" by looking at the UUID string
representation, and knowing that the standard ones start with zero.
Crazily, there doesn't seem to be any normal way to test for this,
although I guess that maybe the uuid.minimumSize() function could be
used.
There are other nasty corners. Don't complain, send me patches.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of being "custom serial", it's a IO model that allows serial or
packet modes, independently of each other (ie you can have a bluetooth
device that does serial over BT rfcomm and packet-based communication
over BLE GATT with the same serial operations that describe both cases).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This way in the en_US locale we no longer get shown the odd "dive(s)"
and instead get correct singular and plural forms.
Most of the patch is just a reindentation as it removes the if clause
that used to do the special case of NOT loading a translation for the
en_US case.
Right now we start with a trivial en_US translation file. My guess is
that this will be overwritten once we do the next round of "new strings,
new translations".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, only a small number of dive computers can be downloaded from
the mobile app. Only present the supported ones to the user. So, currently
restricted to classic BT. Not sure about FTDI support at this point.
Version 2 of the same commit after review from Dirk. Fundamentally,
support is as follows: Android: BT, BLE, and FTDI. iOS: BLE only. For
all other OSses, this commit has no changes. As the BLE backend is
not yet ready, no support on iOS yet.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Translate all of them, but also remove some redundant or possibly
misleading messages. These are now seen by users, not just developers
trying to debug the code.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old system of cloud access updates with fake percentages just wasn't
helpful. Even worse, it hid a lot important information from the user.
This should be more useful (but it will require that we localize the
messages sent from the git progress notifications and make them more
'user ready').
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MAX_TANK_INFO is a new macro in dive.h to define the
maximum number of tank_info_t objects.
TankInfoModel's data() and setData() now check for valid
row indexes before accessing the tank_info[] array directly.
Without this patch TankInfoMode::data() can cause a SIGSEGV.
Reported-by: Pedro Neves <nevesdiver@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changeset fixes 5 issues specific to importing from Liquivision dive logs:
Issue #1: Buffer overrun causes segmentation fault.
At the end of a dive record, untranslatable data is skipped and the file is
scanned for the start of the next dive. This scan was implemented without
regard to buffer size and so the scan ran over the buffer boundary when trying
to scan for the next record after importing the last record in the file.
Issue #2: Incorrect identification of the primary sensor.
The primary tank pressure transmitter was being identified by using the sensor
ID reported in the first pressure event record encountered. When diving with
multiple transmitters (buddy, student, or group transmitters), this is often
not the case and results in the buddy or other group transmitter's pressure
data being imported instead of the primary's.
Through empirical observation of several multi-sensor logs, I identified a
previously unhandled event code (0x10) as marking a sensor identification
event record. Parsing this record allows the primary and other sensors
to be definitively identified regardless of which one sends the first pressure
event.
Issue #3: Sensor values added to the sample collection regardless of sensor ID.
When processing events, the code previously dropped through to create a sample
for every pressure event record, regardless of which sensor ID that event is
associated with. Pressure events for sensors other than the primary are now
ignored and omitted from the sample collection.
Issue #4: Duplicate samples when pressure event time syncs with sample time.
The sample index (d) was not incremented in this specific case resulting in
a duplicate sample (for the same sample time) being created when processing
the next pressure event record.
Issue #5: Unsigned time difference results in erroneous interpolated samples.
When interpolating/extrapolating depth and temperature values for a between-
samples pressure event, a signed time value is subtracted from an unsigned time
value, resulting in an unsigned term. This term is used as a scaling factor
and should be signed to allow for a negative value. Currently, negative values
are instead treated as large unsigned values which result in erroneous scaled
depth and temperature values.
Signed-off-by: Robert Bodily <robert@bodily.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Major functional change in this commit is the addition of found static BT devices
to the internal administration (on Android), in a way that is equivalent to
mobile-on-desktop. So, in both cases, the list of devices in the app are
as in the list of devices on the host OS (Linux or Android). To minimize code
duplication, the btDeviceDiscovered slot is split in two parts, the part to
act as slot for the Qt BT discovery agent (Linux, so mobile-on-desktop), and
the part only needed for Android.
Remaining to be fixed: the correct handling of the QML UI selection of
vendor/product. The first default dive computer is correctly detected,
all paired devices from the virtual vendow can be selected, but clicking
through vendors results in non logical selections. It is obvious why
this is, but a fix is not straigforward at this point.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a central function to convert a BT name to a vendor/product pair
known to Subsurface. This allows interfacing from a paired BT dive
computer, without actively selecting its type, but by selecting it
from the list of paired BT devices. So, after this, downloading from
multiple (paired) DCs is also possible.
And not the niced piece of code ...
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems a very trivial commit, but it is not. It appears that on an Android
build, with defined(Q_OS_ANDROID) the Q_OS_LINUX variable is also defined.
This results in a very tricky discovery process: 1) the JNI stuff pulls the paired
devices from the local BT controller, and 2) The QT discovry agent gets active
BT devices. 1) is a static list, that is, not dependent on actual
visual/discoverable BT devices; it is just cached data from the phone. 2) On
Android, this results in a list of actively visible (paired and not paired)
devices. On desktop, however (with QT/bluez BT stack) the QT discovery agent
just gets the list of paired devices, so more or less equivalent to the situation
described under 1) for Android.
Ok, a long story, but just do not do a discovery on Android at all. Basically,
we need the BT address, device name, and possibly a specific SPP service UUID. This are
fixed and known for HW and Shearwater at this point, so there is no need for a
(lengthy) discovery process, and making sure the the dive computer is discoverable
at the moment the app wants to construct its data to show in the UI. So, the
static list of paired devices is all we need.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's possible that the user has more than one dive computer with the
same name paired with their computer / device. So let's just add the
address to the name to make it possible to tell those apart.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a list of paired BT devices for the "Paired BT Devices" vendor. The
devices under this vendor represent all BT devces that can be found
from the local BT interface. Some special processing is required, as
the BT provided data is (obviously) missing the specific data needed
to open a BT device using libdc code. This processing is not in
this commit, but will follow. This commit is preparation for that.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the recent refactoring of QMLManager to btdiscovery, the
manager.getBtAddress() got superseeded by
downloadThread.data().getDetectedDeviceAddress(). Corrected this
here.
Futher some debug output is modified, so that it report the proper
function names.
This corrects the download from an automatically detected OSTC 3.
Manul selection of the same device from the fake vendor "Paired
BT Devices" does not work, however. Still work to be done in
that area.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons unknown to me, the DCDeviceData instance was freed way too early,
and used afterwards, obviously resulting in a SIGSEGV. This commit creates
the DCDeviceData as a direct child of the QMLManager instance, ensuring
it does not get freed prematurely.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The following call in weight_string():
str = QString("%1").arg(lbs, 0, 'f', lbs >= 40.0 ? 0 : 1);
will make values in lbs larger or equal to 40 to have no fractional
part and be rounded to nearest, while values less than 40 will have one
decimal place.
fixes#412
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The format option "%m" doesn't work for MINGW/Windows and is reported as
an unknown conversation type and this sscanf() call would not work.
The alternative is to malloc() enough space manually - e.g.
strlen(input) + 1.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This shouldn't be part of the UI (qmlmanager), but part of our
overall handling of dive computers and BT devices.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While it seemed logical to use the advertized service UUID that doesn't
appear to be working - instead using this hard coded UUID seems to do
the trick. I now did a successful download from my Shearwater Petrel.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Cochran logs the first 10 to 20 minutes (configurable) of
surface interval in case the diver re-submerges.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Older models allowed for configuration sample frequency; This patch adds
detection of sample frequency (profile_period) for cochran log file
imports.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We remember the offered service uuids as we detect the device and then
try the first one - likely this needs to be fixed / tuned to pick the
right one if multiple uuids are offered.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The linear search to determine that a just downloaded dive was already
downloaded, started from the oldest dive in the logbook. It is, however
more likely that a just downloaded dive is one of the most recently
downloaded. So, just search backwards. Just a trivial performance
improvement.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Searching why the mobile app also downloads pre existing dives, it appears
that in the mobile app, the preexisting attribute is 0, where it should be the
number of dives before the download. This is easily solved by adding the correct
setting on the download thread. This solves the issue of downloading pre existing
dives.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For this I had to also make the DCDeviceData accessible,
and for that it needed to be a pointer.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set the descriptor when starting the thread, this removes
code from the desktop code and makes everything in sync always.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Keeping the Desktop and QML versions of Subsurface
using the same codebase will keep the code saner,
this change makes the Desktop version use the
DCDeviceData helper sturct that encapsulates
the device_data_t member for easy access on the
QML. This also helped move a bit of initializations
from the UI to the Core - and that's always good.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
this class encapsulates the device_data_t from libdivecomputer
in a way that permit us to use it on QML.
this will be needed to prepare the data for the download thread.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
fill_computer_list() creates a Qt friendly
structure that contains all of the necessary
information about dive computers and it's
devices, and it's needed both in Qml and Widgets
to allow the user to download their dives.
This patch makes it possible to use the code
in QML without duplication.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is important to not duplicate code for the Qml
view. Now the DownloadFromDiveComputer widget is mostly
free from important code (that has been upgraded to the
core folder), and I can start coding the QML interface.
There are still a few functions on the desktop widget
that will die so I can call them via the QML code later.
I also touched the location of a few globals (please, let's
stop using those) - because it was declared on the
desktop code and being used in the core.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Corrected problem where dive profiles would include post dive
surface interval samples.
Added detection for corrupt dives.
Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This combines the display with EADD since this is the same
value with a different unit. And show it for air dives as
well.
Suggested by Jan Mulder & Anton Lundin
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the planner, the SAC is prescribed, so there is little
use in plotting it (as the color of the cylinder pressure
line). Rather use the color to show the density of breathing
gas.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This appears to be critical for work of breathing so it might be
worthwhile to compute. So far only in infobox.
For background, see
https://www.youtube.com/watch?v=QBajM3xmOtc
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Update the function to create the dive duration string in a way that
it can be used also in info and stats tab and added some more flexibility.
Changed layout for <1h freedives to "0:05:35" (w/o units) or "5:35min"
(with units and :) or "5min 35sec" (with units with space).
Add a new function to create the surface interval string.
Completely remove old function get_time_string() and get_time_string_s().
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
As a last minute addition, and for peace of mind and soul, add just
another size check, to run before reading values from buffer.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
datatrak_import() is the main function called from parse_file(), but
dt_dive_parser() is where the hard work is done, for both, drop file
seeking/reading and use memory pointers instead.
datatrak_import() now returns 0 on success or 1 on failure and abort
import if parser function fails instead of keeping on trying.
dt_dive_parser() emits a warning if libdc_model is zero (manual dives).
Do not parse profiles if libdc_model is zero, for unknown models we set
a fake 0xEE value coverted to Aladin Air X/Z libdc model number. Func
now takes a pointer to a buffer and moves along the dive, when done
returns a pointer to the actual memory position or NULL if something
went wrong.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Remove dtrak_profile() profile parsing func as this work is left to
libdivecomputer.
Simplifies read_file_header() to return the number of dives in the log
file as we don't use the rest of header data.
Add dtrak_prepare_data() to achieve a device_data_t structure and get
the correct libdc model number for the device.
Remove checking macro substituted with JUMP in header file.
Add dt_libdc_buffer() to get a buffer parseable with libdivecomputer.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Remove dtrakheader structure. In the end, we only make use of the number
of dives in the log file.
Define a models_table_t table which strores the known Uwatec's Aladin
models and its equivalence with libdivecomputer known models.
Add a macro to check that movements in memblock buffer don't get out of
the allocated memory.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Datatrak import is called from parse_file() in file.c. This function
reads the full file to be imported into a memblock structure. It's
easier and more secure, to parse this buffer instead of the file itself.
These are the necessary changes in function datatrak_import()
declaration and call.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Apparently the refactoring changed these values to be returned directly
in seconds. Not sure why, but luckily we have test cases that discovered
the change.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Moving the GUI independent Seabear import functionality to Subsurface
core. This will allow Robert to call it directly from download from DC.
Tested with H3 against released and daily versions of Subsurface. The
result differs somewhat, but it is actually fixing 2 bugs:
- Temperature was mis-interpreted previously
- Sample interval for a dive with 1 second interval was parsed
incorrectly
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
We now respect the settings in the preferences and also only show
the duration as minutes and seconds if the dive is a free dive.
Fixes#361Fixes#362
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we don't have a GPS service userid in the preferences and the GpsLocation class
isn't instantiated, this would cause a crash.
Fixes#367
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes to the "Add pictures to dive" function:
- Make Exif handling more tolerant by removing the JPG sanity
check for EOI
- Give info to user if exif.cpp can't identify a Exif date/time
- Restrict file dialog filter for correct picture time by DC photo
to JPG because Exif is only available from JPG
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Connect up all the settings that are the same, and remove those who are
not, and correct those who only are minor differences.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This is mostly copy-paste from the ostc3 case, but there are some minor
differences. Some minor things have different meaning, and there's a
slightly different command set, but I couldn't figure out a sane way of
joining them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
The core to avoid adding redundant gas switch events was completely
buggered, and caused the result list to be corrupted if it ever
triggered. This should fix it.
Fixes: b5de08b7 ("No gas change event on merging dives with same gas")
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Cc: Miika Turkia <miika.turkia@gmail.com>
Cc: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By copying a line from the Linux bluetooth code I can download
from OSTC dive computers on Mac. Don't ask me why this works.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
See https://github.com/Subsurface-divelog/subsurface/issues/345. The
menues where not translated. The basis of this error is a simple
typo in core/taxonomy.c where the classname was mis-spelled in the
QT_TRANSLATE_NOOP. In addition, to pull and translate the strings
from C code, the normal tr() does not work, and the functionality
from the gettextfromc class is used.
Fixes: #345
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The file static po2 value, used to set the setpoint data, was not re-initialized
at the parsing of a dive during import from the divecomputer. So, in one import session,
the po2 was transferred from one dive to the next, obviously resulting in weird bugs, due
to possible wrong po2 settings.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is another attept at the problem if identifying a potentially
user supplied text in the dive notes upon replannig a dive.
It gets rid of the user visable position markers (*!* and ***) and
cirumvents problems with mark-up by first converting the old notes
to plan text (assuming that user only enters plain text in the notes
field as we do in other places as well). Then the automatically added
part is identified by locating the disclaimer in the text (if the user
edited/delted the disclaimer or changed langue in between it is her
problem to manually delete the old plan).
Everything from the disclaimer on is deleted and replaced by the new plan.
If the disclaimer is not found, the new plan is appended to the old notes.
This way we make sure no information gets automatically deleted.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2 strings in the planner output showed based on "Bühlmann ZHL-16B with GFLow = "
gradient factors without % after the factor. While this is fine for an
abbreviated form like GF 40/80, this looks strange for a verbose sentence like
the 2 corrected ones.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Currently we do not know what the extra data in the sampleBlob is, but
the block size must be adjusted nevertheless.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
New strategy to identify old planner output in notes when
replanning a dive: Text anchors ("*!*" and "***") added for planner output
For backwards compatibility: If there is no anchor but an old table
delete everything.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Some of these header files are no longer necessary, and will be removed
from libdivecomputer in the near future.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It appears that Cobalt might include additional gas mixes, and only way
to determine what is used appears to be to ensure that start and end
pressures are greater than 0. One would assume there to be something
else available in the database, but I was not able to spot it.
Fixes#297
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This prints this information in the header near
"Subsurface" where I guess at least the version information
belongs. Plus it saves a line.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is a rather arbitrary value, intended to create actually valid
pressure values for Uwatec Memomouse users - since we treat 0bar as
invalid pressure value, this simply creates an arbitrary '30bar + delta'
to '30bar' consumption graph (since all the Memomouse devices give us is
the pressure delta that was used during the dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of delivering the actual start and end pressure, memomouse
gives you a start pressure that matches the delta between actual
start and end pressure, and an end pressure of zero. Who the heck
knows why it does that, but the information is better than nothing,
so we should accept it.
Fixes#286
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon replanning a dive, we want to delete the old
dive plan in the notes and replace it with the actual.
This fixes a problem when we failed to detect the old plan due
to the deco model name appearing in the disclaimer that was used
as a marker for the notes.
This patch also adds translation markers for the deco model name strings..
Fixes#285
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Nothing really special here. Just a split of the only p02 max threshold into
a min threshold and max threshold, and the adaptation of the UI. Change of
translatable strings included.
ref: https://github.com/Subsurface-divelog/subsurface/issues/259
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This can occur e.g. if directory permissions prevent one from writing to
the local cloud storage directory. (Such a crash was discussed on
mailing list.) The error message on GUI is misleading, claiming that
cloud connection failed...
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
---
We probably should check the return value of other git operations as
well, but going for bare minimum for now.
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Sending nicely readable formatted coordinates to Google Maps does not
result in a correctly positioned map. Google likes unreadable
decimal format.
Little hacky solution. Added a gps_decimal attribute, populate that
with the standard function for format a coordinate to string, but
reset the preferences value temporarly so that it always converts it
to decimal style.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add automatic tests in TestPlan for minimum gas:
- Copy minimum gas result (pressure) to diveplan.
- Add cylinder size and working pressure for bottom gas to every dive in TestPlan
Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan
- Add minimum gas check for every dive
- Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank
Hint: Deco check for these new dives is commented out at the moment
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
For the "crazy" long and deep dives in "TestPlan" an overflow happened here.
Rearranged the calculation to have more margin.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The function is unused, to silence the warning add the "unused"
GCC attribute to the function declaration.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use lrint() to fix both:
1)
core\planner.c:902:23: warning: conversion to 'int' from 'doub
le' may alter its value [-Wfloat-conversion]
2)
core\planner.c:907:21: warning: conversion to 'int32_t' from '
double' may alter its value [-Wfloat-conversion]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The following pragma is Clang specific:
It produces a warning:
warning: ignoring #pragma clang diagnostic [-Wunknown-pragmas]
Only enable it for Clang by checking the __clang__ macro.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... for consistency, while we are at it.
There are still some internal depth variables which are ints
somebody might take a go at those.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This is needed in the altitude pressure conversion as there
negative altitudes are possible (for diving in the netherlands
or the Dead Sea).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.
Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.
Add line break before pO2 warnings but only if warnings exist.
Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Not using lrint(f) when converting double/float to int
creates rounding errors.
This error was detected by TestParse::testParseDM4 failure
on Windows. It was creating rounding inconsistencies
on Linux too, see change in TestDiveDM4.xml.
Enable -Wfloat-conversion for gcc version greater than 4.9.0
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
On Windows that would fail because stat() doesn't deal well with our
utf8 strings.
Added new subsurface_stat() portability function to replace stat().
Added Windows implementation of subsurface_stat() using wstat(),
with conversion to ut16 of the inputed path.
Other platform implementations (linux, android) make use of the normal stat().
Added non ASCII test case in TestGitStorage::testGitStorageLocal()
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
When merging, we should treat an empty dive site (which will be deleted
on save) the same as not having a dive site.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Enable translation for a few additional internal dive events.
Ensure that all event names in datatrak.c are collected for translation.
Ensure that for gaschange in profile info box the "cyl." string is also translated.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
If the second dive site doesn't have a particular string, but the first
one does, we did the wrong thing and created a result string like
(first dive site string) or ((null))
which is not useful. We should just use the first dive site string
as-is.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch eliminates the difference between the saturation and
desaturation rates. This was probably once meant as a conservative
measure but the desaturation rate was increased rather than the
saturation rate (which is probably a typo, as reported by Stefan).
Since there is no good basis for this anyway, this patch sets
both factors to 1.0 (and if accepted the whole factor business
should be removed).
This makes our deco times slightly longer. But in the past,
we had introduced a 1.2% fudge factor in the critical radius
calculation to add conservatism and match the benchmark better.
Removing this fudge factor brings us close to the benchmarks.
Expected test values updated.
Reported-by: Stefan <sjti@gmx.net>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We used to always create a new dive site structure when loading dive
site data from XML.
That is completely bogus, because it can (and does) create duplicate
dive sites with the same UUID. Which makes the whole UUID pointless.
So instead, look up the existing dive site associated with the UUID
loaded from the XML, and try to merge the data properly if we already
had dive site information for that UUID.
Reported-by: Alessandro Volpi <volpial@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have no idea why we only merged air temperatures. But it was very
explicit (even the function doing the merging was named
"merge_airtemp()"), and water temperatures were left alone.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Qt model sorting for the dive date was using a unsigned number,
which doesn't work for dates before 1970.
Also, the dive date parsing got the year 1900 wrong. Not that we really
care, because other parts of date handling will screw up with any date
before the year 1904. So if you claim to be diving before 1904, you get
basically random behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The test for the dive being a planned dive was completely bogus:
- it should use "same_string()" which correctly checks for NULL
- the string it checks for is obviously spelled wrong anyway.
Reported-by: Alessandro Volpi <volpial@gmail.com>
Fixes: a031dbbbd ("When merging planned dives keep all cylinders")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the beginning of the diveplan, divedatapoints of zero
duration indicate available gases with the depth giving
the suggested switch depth. Zero-duration datapoints in
the middle of the dive do not have this meaning and should
thus be ignored when composing the gaslist.
The tests should have these gas defining segments in the beginning.
This fixes a problem when replanning a dive that would change
to random gases during deco.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This resets the maximum crushing pressures and the maximal
ambient pressure between repetitive dives to prevent anomalies
that a dive produces a shorter deco when following another one
than without.
Reported-by: sfuchs@gmx.de
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes some further updates to the new cylinder merging code:
- avoid re-using the cylinder if the usage type (OC/diluent/O2) is
different between the two dives, even if the gasmix might be the
same.
- avoid re-using a cylinder if the user has manually added pressure
data for it (and the pressures don't match)
- when deciding to reuse a cylinder, make sure that we merge as much of
the type information as makes sense.
This will potentially result in more cylinders that might need manual
cleanup, but at least we won't be throwing out user data. And in most
cases where merging happens, none of this is an issue (because the data
comes fresh from a dive computer, and won't have been manually edited to
trigger the new rules).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The old cylinder merging code depended on the preferred dive having all
the cylinders, and the newly merged dive was just forced to pick from
that existing set of cylinders.
That worked ok if you have a "main" dive computer that you have all the
gases programmed for, and you download that first, and then you download
any secondary data later.
But it completely messed up if the second dive computer had gases that
the first one didn't know about, and just basically ended up doing
random things.
This rewrites the whole thing to actually try to create a union of the
two sets of cylinders when merging, with sane matching so that if the
cylinders match you won't get duplicates.
Miika Turkia hit this when he only used one gas, but had several gases
defined in his OSTC that he downloaded after his Vyper (with had just
the single gas defined).
This should fix that case (at least it does for my xml merging test-case
that showed the same problem after some munging).
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to have two variables for the same purpose.
[Dirk Hohndel: changed to keep the two separate functions as otherwise
we no longer parse existing repos successfully]
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order to streamline the view between desktop and mobile we need to save
selected profile related settings to git.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
When the first leg in the planner is not cylinder 0, a gaschange
event at t=1s is inserted. In the profile, we should treat that
as inital gas, so no pressure information is printed for cylinder 0
that is used nominally for one second.
This fixes a problem reported by Willem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Changed the markup with <div> and <br> tags of the planner output in
a way that is is a good compromise for both displaying in UI and
printing.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This is what we have same_string() for...
This prevents a crash when saving a dive in the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding --win32log as the first command line option on Windows
will now log all stdout and stderr output to the files
subsurface_err.log and subsurface_out.log in the working directory.
This change required a new argument 'bool logfile' to be added to:
subsurface_console_init() which is defined in all platform files
(linux.c, macos.c, etc.)
Example usage:
subsurface.exe --win32log -v -v -v
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This is important if in one dive we have the real dive and
a planned version of the dive as different computers using
different sets of cylinders.
[Dirk Hohndel: an early version of this was mistakenly pushed out
by me; I reverted that and added this commit since
fixing things up as I had done for the other two
patches made things nearly unreadable]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When Suunto Vytecs are used in gauge mode they don't record gasmixes.
If a tank pressure sensor is present they nevertheless record the
pressures. This patch handles this situation by assuming the tanks
contain air (and warning the user about this).
[Dirk Hohndel: I had mistakenly pushed out an earlier version of this
commit, so this fixes things up to the final version]
Reported-by: antonnorth@gmail.com
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging a real dive with a planned dive (for comparison),
we should not try to be clever in merging similar cylinders,
rather keep the union of both cylinder sets as the two versions
of the dive might differ in exctly which gas and how much of it
was used.
Increase MAX_CYLINDERS to 20 to make room for this. We warn if we
exceed this number.
[Dirk Hohndel: I had mistakenly pushed out an earlier version of this
commit, so this fixes things up to the final version]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Print the SAC values from preferences into the diveplan.
These are the values used for calculation of gas consumption.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Print the ATM pressure and the altitude used for calculation into the resulting diveplan.
Moved this info together with the deco model info below the runtime table.
There is one drawback in this implementation: Altitude will be recalculated from surface pressure and therefore may differ slightly from altitude entered in the UI.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging a real dive with a planned dive (for comparison),
we should not try to be clever in merging similar cylinders,
rather keep the union of both cylinder sets as the two versions
of the dive might differ in exctly which gas and how much of it
was used.
Increase MAX_CYLINDERS to 20 to make room for this.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When Suunto Vytecs are used in gauge mode they don't record gasmixes.
If a tank pressure sensor is present they nevertheless record the
pressures. This patch handles this situation by assuming the tanks
contain air (and warning the user about this).
Reported-by: antonnorth@gmail.com
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the cylinder table, the last column ("use") always showed
OC-GAS. Editing was enabled, but the user had to guess to enter
a small integer meaning dilluent or CCR oxygen cylingder. I guess,
nobody has ever done that.
This patch makes this column clickable. A click toggles if the cylinder
is used for planning or not. This wait it is much easier to investigate
the consequences of gas loss on a plan.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We had hardcoded the exact translation of the event numbers. They
haven't changed (although we did have what appears to be a spurious
entry for "non stop time" at the end that libdivecomputer doesn't have
an enum for).
Instead, use an explicit array index initializer array, so that it's
obvious that the two match up (and if the sample event numbers ever
change, we should cope with it gracefully).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New libdivecomputer versions use DC_SAMPLE_GASMIX to indicate a gas
change (which contains the cylinder index we're changing to) rather than
SAMPLE_EVENT_GASCHANGE*.
Unlike the old GASCHANGE model, and despite the name, DC_SAMPLE_GASMIX
does not actually say what the mix is, it only specifies a cylinder
index. We had already extended SAMPLE_EVENT_GASCHANGE2 to have the
cylinder index in the otherwise unused "flags" field, so this is not all
that different from what we used to do.
And subsurface internally already had the logic that "if we know what
the cylinder index is, take the gas mix from the cylinder data", so
we've already been able to transparently use _either_ the actual gas mix
or the cylinder index to show the event.
But we do want to make it an event rather than some sample data, because
we want to show it as such in the profile. But because we are happy
with just the cylinder index, we'll just translate the DC_SAMPLE_GASMIX
thing to the SAMPLE_EVENT_GASCHANGE2 event, and nothing really changes
for subsurface.
libdivecomputer has made other changes, like indicating the initial
cylinder index with an early DC_SAMPLE_GASMIX report, but we've seen
that before too (in the form of early SAMPLE_EVENT_GASCHANGE events), so
that doesn't really end up changing anything for us either.
HOWEVER, one thing that is worth noticing: do *not* apply this patch and
then use an old libdivecomputer library that sends both the
DC_SAMPLE_GASMIX samples _and_ the deprecated SAMPLE_EVENT_GASCHANGE
events. It will all *work*, but since subsurface will take either,
you'll then get duplicate gas mix events.
It's not like that is in any way fatal, but it might be a bit confusing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify formluas for gas use to take into account the
compressibility correction for real gases. This introduces
also the inverse formula to compute the pressure for a given
amount of gas.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Our attempt to skip any white space after the comma causes an ASSERT (strangely
only on Macs).
This closes#158
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds tooltips for the equipment tab for each cylinder, showing the
amount of gas used.
When you mouse over the size and working pressure fields, the tooltip will
show the amount of gas used (along with start and end gas volumes). And
when you mouse over the start and end pressures, it will show the start
and end gas volumes, and the Z factor used.
I started doing this because of the gas volume questions in the last day
or two (and a few from a few weeks ago). When even Robert Helling starts
wondering about the effects of compressibility on the SAC calculation, our
numbers are clearly too opaque.
With these tooltips, at least you can see what went into the used gas
calculations, instead of having to add debugging options to print out Z
factors.
[ This patch also adds a "rint()" to get the rounding right in the
gas_volume() function. Although rounding to the nearst milliliter
really doesn't matter, it's the right thing to do after doing FP
calculations ;^]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of creating the individual parsers, and keeping track of their
arguments, this just uses the "new" dc_parser_new2 function ment for
buffer parsing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This removes our own declaration of dc_descriptor_t and all our accesses
to its internals, and switches to use the libdivecomputer functions to
access those instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This is to avoid confusion with planner.display_deco_mode.
When accessing the "current deco mode" use the decoMode()
helper function.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We have two prefernces determining the deco_mode (BUEHLMANN vs VPMB
vs RECREATIONAL): One for the planner (deco_mode) and one for
displaying dives (display_deco_mode). The former is set in the planner
settings while the latter is set in the preferences.
This patch clears up a confusion which of the two to use by introducing
a helper function that selects the correct variable.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This starts using the newly lifted out get_descriptor in configure dive
computer, instead of previously hard-coded out of date
switch-statements.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This renames and cleans up ostc_get_data_descriptor into get_descriptor,
for more generic use.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is for later reuse of that function in other source files.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know how those arose in the first place, but an
empty QByteArray is never a valid hash value for an image. So
we should not store those in our translation tables and also
get rid of them when loading the tables from disk.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes two bugs:
1) It first computes the effective gradient factors and then
composes the notes with the diveplan rather than the other way
around.
2) It does not try to fit a line through a single point.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For each stop, this computes an effective gradient factor
that gives the same ceiling. Then, it does linear regression
to find values for GFlow and GFhigh that give a similar deco
profile.
Note that this optimises the average gradient factor. The
runtime however depends strongly at the gradient factor at
the last depth. So we don't necessarily to get the runtime
right.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is central information when planning a dive but often
scrolled out of the window for longer plans. So print it on
the top.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon importing dives, the average depth can be undefined which we store as 0.
This zero should not contribute when computing the average depth for
the (yearly) statistics, only dives with average depth set now contribute.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a copy-paste error made by me that caused
tempSensorOffset to first be set the wrong way and then overridden by
pressureSensorOffset.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had (in the wrong place, imo) a new feature that
should differentiate the different deco_modes, you could
plan your dive in buelhman and see it in vpm-b, for instance
but both of them accessed the same pref.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove a few uneeded lines and add more loading code for
the preferences.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes all the cases that I didn't checked for
the default prefs.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those macros are nice because they take into consideration
the default preferences.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Date loading was incorrect, this unittest + fix deals with that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculate gfline using the gradient factor that is set by the planner
preferences when in the planner, and by the general prefs when not in the
planner. This is achieved by doing the gradient factor calculation in dive.c,
where buehlmann_config is defined.
Previously, the gfline was calculated using the general preferences gfhigh and
gflow, even when in the planner.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes a couple of issues with the tests.
Also, a type in prefs.h is "short" while it's actually
a boolean, this made me write the wrong testcase for this.
Fixed this by setting the Qt wrapper to bool, but I didn't
changed the c implementation because I tought I could break
something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging dives, this will skip the gas change event if both dives
use same gas.
Fixes#1099
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... as those are needed for the heatmap and not only
for Buehlmann ceilings.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While Linux can set the locale from the language text, Windows needs the
correct locale value (which makes more sense to use, anyway - that's why
we save it).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus pointed out that it might be another call site (and looking at his
proposed patch I noticed a logic error in my earlier attempt)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a simple cp2130 userspace driver. Its probably unusable in the
real world but its a great base to build upon.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The set_halfduplex function takes a unsigned int, not a int.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rewrites the custom serial code to use the new api which I
implemented in the Subsurface-branch of libdivecomputer.
This is a bit to big patch but I haven't had the time to break it down
into more sensible patches.
This rewrite enables us to support more ftdi based divecomputer
communication and is tested with both a OSTC3, OSTC2N and a Suunto
Vyper, all over the libftdi driver.
The bluetooth code paths are tested to, and should work as before.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing adive in Subsurface-mobile we can only handle one buddy
due to the limitations of the combobox. To prevent loss of data when editing
a dive with more than one buddy we display "Multiple Buddies" in the buddy
field. This creates a special case where no changes are written to the buddy field
unless the user changes buddy for that dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... and not just for Buehlmann. This makes the saturation
graphs meaningful for VPM-B.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change runtime table string from ZHL-16B to ZHL-16C to reflect he fact
that we use 5min as half-time for the fastest compartment rather than
4min.
Further more trade pow(2.0, ...) for exp().
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes 'fixup_dc_cylinder_index()', which was added to fix up the
pressure sensor indexes from the Atomic Cobalt dive computer.
Even for the Cobalt it really shouldn't matter, because the
libdivecomputer backend for the Cobalt actually tries to do the right
thing. See for example commit 8853a1ccd422 ("Associate the pressure
samples with the primary tank.") in libdivecomputer.
Some historical digging shows that the subsurface sample pressure index
code came in from commit e32ba4d6d8 ("Improve tank handling for
Cobalt"), dated Tue Oct 28 13:48:15 2014.
And the libdivecomputer "use the right cylinder" code was around the
same time (Fri Oct 10 20:29:17 2014 +0200).
So I suspect that subsurface needed the fixup based on an older version
of libdivecomputer. Jef's patch is a couple of weeks before, but we may
not have tracked libdivecomputer religiously.
The reason to remove this code is because it can (and does) mess up the
sensor index when it is actually reliable, like in the multi-sensor case
of the Suunto EON Steel.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the option to select a cylinder when adding or editing a dive.
Due to limited screen size we restrict the editing to the first cylinder only.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the recent setting cleanup, gradient factors were set to bool, so were
saved as 1/1, rather than say 50/80. This commit fixes that.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No, they don't make sense. We should normally not have multiple samples
that are on the same second. But they seem to happen on the EON Steel
under some circumstances, and instead of dividing by zero when trying to
interpolate across such a sample, do something sane.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to clear the 'dc_tank_t' for each dive, but then only clear the
volume field in between each cylinder. That means that if the
libdivecomputer back-end does not touch a field, it might contain the
stale value from the previous tank information.
I'm not sure this is actually much of an issue, since I'd expect
back-ends do seem to initialize the fields fully (at least the EON Steel
back-end does). But it's inconsistent.
Also, the code was actually buggy because of the odd indentation: it
would only ask for new tank information up to 'ntanks' tanks, but
because of the final fixup that was done outside of the conditional, it
would actually update the cylinder begin/end pressure data *beyond*
'ntanks', and just re-use the last libdivecomputer data for the rest of
the cylinders.
Again, in practice, that probably never really happened, but it is a
real bug.
The fixed-up code actually looks better too, imho, and is one line
shorter because of the initialization now being done in one place rather
than two.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In subsurface, we only have one cylinder pressure per sample (well,
technically two: we have a separate o2 pressure for rebreather diving).
Which makes things "interesting" if the dive computer can actually have
multiple pressure sensors, and can report them all concurrently. Like
the Suunto EON Steel.
We used to just take the last one (each sensor reading would just
overwrite any previous ones), and this quick hack just changes the logic
to prefer the "current" cylinder instead.
It's wrong, and it's stupid, but it's the best we can do without major
surgery.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There's one function named uiLanguage() that should return
the current uiLanguage() that subsurface is running, but
it actually sets a whole lot of preferences, I think
that the general idea of that function is okay, but it seems
broken for me.
still, I used it to load the correct language from the preferences
since it's what this function is currently doing right now.
Also, a lot of missing groups where added.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only set the settings if it actually changes, when the user
clicked on the save button on the preferences, the code would
run in every dialog saving each preferences on disk, but this
is uneeded if the value didn't changed.
Also, while doing that, I found a couple of places where I
used the wrong field, which are now fixed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit b76c1846bb ("Settings update: Simplify Update Manager")
the logic for when to show the UpdateManger question to the user got
broken. Unintuitively, a boolean setting actually has three possible
values. True, False, and Unset. This patch fixes things to work as
designed again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move Preferences sync / initialization out of the planner
widget prerferences to the ObjectWrapper.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason, the dive computer settings weren't in the
settings prefs. This moves it, makes the boilerplate on Settings
ObjectWrapper and make things compile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, prefs.save_userid_local is being set outside of
a preferences set (it's set to true and false while
loading the files via xml or git) and because of that
I had to bypass a few method calls.
When something triggers a preferences change, the
application will be notified that the preferences
changed, thing that I couldn't do while reading the
xml or git because that should be local-only.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have the serial number and firmware version fields in "struct
divecomputer", but we don't actually fill them in when loading the data
from git or xml, because we save all that information in the separate
device table instead.
But in order to always have the serial number associated with a device,
let's make sure to fill those fields in. It won't hurt, and this way we
have the information available whether we just loaded the dive from a
file, or imported it from the dive computer. One less semantic
difference to worry about.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The authentication count was a static counter in the authentication
callback, which gets incremented until we consider the authentication to
have failed.
The problem with that is that it doesn't get incremented for just _one_
authentication operation, it gets incremented each time you try to load
or save, so eventually the code considers authentication to have failed
even if nothing ever went wrong.
This fixes it by making it static to the whole git-access file, and have
each operation clear it before starting a new remote access.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having only the last 2 digits of the year is somewhat confusing as one
can easily think that to be the day. Thus it is more clear to use full
year for the trip header.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Windows Server 2008 seems to be missing the heavy dash in Courier New.
This replaces the symbol by an ordinary dash.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface uses "local time" which in particular means we never
display time zone information to the user. The user (and our file
format) only sees times like 5pm or 17:00. A better name than
local time (which could mean "local at the dive spot) would
be "watch time", the time displayed by the diver's watch when
she entered the water.
Internally, we store times as time_t, seconds since Jan 1 1970 0:00
UTC. Our convention for conversion between 5pm and time_t as always
been to treat 5pm as if it were UTC.
Then confusion arose since Qt's QDateTime (which is tied to UI elements
like QTimeEdit and similar) is time zone aware and by default assumes
the system time zone. So when we set a QDateTime to 5pm and then later
convert it to time_t we have to take care about the difference between
UTC and the system time zone.
This patch unifies our solution to this problem: With it, we set all
QDateTime's time zone to UTC. This means we don't have to correct for
a time zone anymore when converting to time_t (note, however, the
signedness issue: Qt's idea of time_t is broken since it assumes it
to be unsigned thus not allowing for dates before 1970. Better use the
millisecont variants).
We only need to be careful about time zones when using the current time.
With this convention, when assigning the current time to a QDateTime, we
need to shift for the time zone since its value in UTC should actually be
the watch time of the user who is most likely used to the system time zone.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
to allow grantlee to access individual fields of the cylinder_t struct
rather than a string representation of the whole cylinder info using a
grantlee structure like this one:
<table class="table_class">
<tr>
<td>Cylinder</td>
<td>Start press.</td>
<td>End press.</td>
<td>Gas mix</td>
</tr>
{% for cylinderObject in dive.cylinderObjects %}
<tr>
<td>{{ cylinderObject.description }}</td>
<td>{{ cylinderObject.startPressure }}</td>
<td>{{ cylinderObject.endPressure }}</td>
<td>{{ cylinderObject.gasMix }}</td>
</tr>
{% endfor %}
</table>
Signed-off-by: Tim Wootton <tim@tee-jay.org.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When stuck in areas with really bad internet 5 seconds may not be enough,
but making the timeout longer in general seems the wrong way to go. So
keep the default 5 seconds but allow the user to override that with
subsurface --cloud-timeout=NN
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a lot more places all over Subsurface where this needs to be
cleaned up. The converstion of the preferences system has been a complete
mess.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b1ed04a means that DivePlannerPointsModel::rememberTanks() and related
functions and variables are no longer required
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way they display correctly when accessed from grantlee template
Fixes#1085
Signed-off-by: Tim Wootton <tim@tee-jay.org.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of having fixed numbers and trying to translate them into
strings, a dive computer could just give us the string directly. Like
the new EON Steel backend does.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylinder use field was not merged when dives were merged. This is
normally not noticeable, since hopefully the cylinder use should be the
same anyway, but when re-downloading the dives from the EON Steel after
updating it to also get cylinder use data, the dive merging threw the
data away again since the original dive lacked it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses the extended tank type information to fill in the cylinder use
(OC gas, CC Diluent or CC O2) from libdivecomputer when available.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial and metric unit formats already had this, but the
personalized one missed the newline at the end.
It shouldn't really matter, since it's the last line of the file, but it
is not right.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It makes no sense to keep trying. Maybe we need a UI to force it online
again, but for now this works much better when using cloud storage while
actually offline.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add option to calculate the best mix portion of O2 and He for the dive's max
depth if the user enters * in the MOD and MND cylinder fields. Gas portions
are automatically recalculated if the max depth of the dive changes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.
It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have two different models for setting the deviceid associated with a
dive computer: either take the value from the libdivecomputer 'devinfo'
field (from the DC_EVENT_DEVINFO event), or generate the device ID by
just hashing the serial number string.
The one thing we do *not* want to have, is to use both methods, so that
the same device generates different device IDs. Because then we'll
think we have two different dive computers even though they are one and
the same.
Usually, this is not an issue, because libdivecomputer either sends the
DEVINFO event or gives us the serial number string, and we'll always
just pick one or the other.
However, in the case of at least the Suunto EON Steel, I intentionally
did *not* send the DC_EVENT_DEVINFO event, because it gives no useful
information. We used the serial number string to generate a device ID,
and everything was fine.
However, in commit d40cdb4755ee ("Add the devinfo event") in the
libdivecomputer tree, Jeff started generating those DC_EVENT_DEVINFO
events for the EON Steel too, and suddenly subsurface would start using
a device ID based on that instead.
The situation is inherently ambiguous - for the EON Steel, we want to
use the hash of the serial number (because that is what we've
historically done), but other dive computers might want to use the
DEVINFO data (because that is what _those_ backends have historically
done, even if they might also implement the new serial string model).
This commit makes subsurface resolve this ambiguity by simply preferring
whatever previous device ID it has associated with that particular
serial number string. If you have no previous device IDs, it doesn't
matter which one you pick.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There might be some spurious setpoint changes at t=0 without
an actual value (I have no idea where those come from). In
any case, those do not indicate that the dive is a CCR dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were two problems in the calculation of tissue pre-
saturation from previous dives: We added the surface interval after
the dive rather than before and when also took dives into accout
that were in the future of the dive considerd.
Reported-by: Timothy Massey
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We could create a plot_info data that didn't contain all the time slots
for the events fromt he dive computer, which would terminally confuse
the plotting of the event profile widgets because it couldn't match up
the event with the dive plot data model.
So for example, in DiveEventItem::recalculatePos(), when the code tries
to figure out the spot in the data model, it could fail, and then try to
hide the event (because without the data model information it doesn't
know where it should go). But that hiding would then not match the
logic in DiveEventItem::shouldBeHidden(), and the event would end up
being shown in the upper left-hand corner of the profile after all.
The reason the plot_info data wouldn't contain the time slots is that
the slots are allocated primarily for the sample data, and then the
events would be added in between sample data in populate_plot_entries().
But since we'd only add the event pointer *between* samples, that would
mean that events after the last samples would not get plot-info points
allocated to them.
That issue was exacerbated by how we also truncate uninteresting samples
at the end when some dive computers end up giving a long stream
(possibly several minutes) of "at the surface" events before they
finally turn off logging.
This makes sure that we take the event timestamps into account for the
"maxtime" calculation, and also that we finish populating the plot_info
data with any final event timestamps.
Now all the events will have a matching plot_info entry.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed the fact that not only did we skip importing surface events
from the dive computer, we had also made our xml parser ignore them when
loading an xml file. All part of our historical "let's ignore surface
events because dive computers are being very annoying about it".
Signed-off-by: Linus Torvalds <torvalds@linux-foundtion.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are cases where we actually want to keep them, as exemplified by
this situation from Richard Yorke:
"I have just come across a situation when ignoring the surface marker
is a disadvantage. I have just had a problem with my BC feed
seeping, slowly filling my BC and as I control my buoyancy on the
bottom using the air in my drysuit, I did not notice, so that when I
came to ascend the expanding air in my BC caused a loss of control.
Fortunately not from a great depth and no untoward consequences.
However, the Subsurface profile only shows me rising to 4m and
descending to 5.5m for my safety stop. However I actually broke the
surface and descented to 5.5 but the frequency of recording depth was
not fast enough to show this as it was so brief"
so remove the code that ignores the surface events entirely.
I think we'll have to come up with some smarter filtering model for
showing them, but that is predicated on getting these events to come
through in the first place.
Reported-by: Richard Yorke <yorke.richard@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our primary dive computer really is special, not just because it's the
first one: it's directly embedded in the "struct dive", and so if you
just walk the divecomputer list, you'll miss it, because it's not _on_
the list, it is the very head _of_ the list.
We had that bug in copy_dive(), and it turns out we have it in
clear_dive() too: clear_dive() would free all the dive computers on the
list, but not the actual primary one.
This is a minor memory leak, no more, so it's not exactly critial, but
let's just do it right.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A few basic rules for gas validation:
We can't have <0%, or >100% of either O2 or He
O2 + He must not be >100%
Switch depth can't be <0%
This places limits on user-input values
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For starters, let's just state that this dive was downloaded from
Shearwater. However, once we have information how model numbers map to
names, we can use that info for the models we know about.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous patch (Planner: add best mix EAD preference) used the term EAD
(equivalent air depth) in variable names and strings, when it should have been
END (equivalent narcotic depth).
They're not the same thing and shouldn't be confused.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add best mix EAD preference and UI, along with a tooltip describing what it
does
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Best mix O2 calculated based on planner Bottom O2 preference
Best mix He calculated based on EAD of 30m (should be made user-configurable)
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds autocompleting text input fields for suit, buddy and
divemaster.
[Dirk Hohndel: some whitespace cleanup]
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This generated the QStringLists needed to populate the combobxes
in DiveDetailsEdit.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will parse the date and time information on CSV import if the file
name matches the one used by APD log viewer (date and time are available
in the file name). Hard coding the year to 20?? is a bit unfortunate,
but as there is only 2 digits in the year, we have to invent something.
And it would be quite optimistic to assume this will bite us back any
time soon :D
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Printed command line can be used to manually test the import function,
allowing faster testing of XSLT changes, and showing debug prints that
are discarded by Subsurface.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No point in having it defined in each main program's .cpp. Especially
since the unit tests don't define them.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise we keep downloading the same image multiple times instead
of new images.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not sure why we claimed that this was successful when clearly it wasn't.
There's a risk that this could break something on the desktop, but it
makes no sense to me why that would be the right thing to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a feature that many people have asked for. This implementation is
somewhat simplistic because we simply use a different name for the
program settings - but interestingly enough this appears to be enough to
capture a lot of the core functionality that people are looking for in
multi-user support.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise we step on our own feet when downloading several images,
like after import from divelogs.de with many linked images.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to work around the crazy QDateTime::fromTime_t() problem in Qt.
It is *very* lightly tested. In fact, the only test is that "test0.xml"
change that is part of this patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It turns out that we are starting to have users that have logs that go
back that far. It won't be common, but let's get it right anyway.
NOTE! With us now supporting dates earlier in 1900, this also makes
"utc_mktime()" always add the "1900" to the year field. That way we
avoid ever using the fairly ambiguous two-digit shorthand.
It didn't use to be all that ambiguous when we knew that any two-digit
number less than 70 had to be 2000+. Now that we support going back to
earlier in the last centiry, that certainty is eroding.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far we didn't do that at all, we either relied on the user manually
creating a local repo, or we cloned a remote repo.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we have incorrect cloud credentials, we need to return an error on
git authentication call back in order to avoid endless authentication
loop. This might well happen e.g. when changing the password on desktop
and then on laptop Subsurface still thinks the credentials are validated
and ends up in the authentication loop.
The authentication call back on libgit is intended to be used to ask for
user credentials, and as we handle credentials elsewhere, we just need
to fail the authentication attempts. (The threshold for bail out could
have been 1 attempt...)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to parse the DL7 profile data (skipping the header and
footer)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make them use indices into the plot-info, fix calculation of average
depth, and fix and add comments.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 5.6.0 is broken when it comes to using CoreLocationService on iOS.
It doesn't even check if the location service is enabled. My patches fix
that and make Qt set an error code right after service creation. Having
the service creation fail is actually the wrong thing to do because then
Qt switches over to GeoClue and that really isn't helpful for our needs
here.
Additionally, Qt 5.6.0 without my patches doesn't follow the REQUIRED
flow of using the location service as it does not check the access
permissions before accessing the GPS service - without doing so the
GPS service will not run in the background.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the GPS source returns an error that could be an indication that the
user hasn't given us permission to use it, so switch our status to NOGPS.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initially we don't know if we have a source. After that we may think
that we have one, or not have one (but that can actually change while
the program is running if the user, for example, turns the source off
or switches to airplane mode).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I couldn't figure out how to break this down into small, useful commits.
Part of the problem is that I kept going while working on this and as you
can see from looking at the commit, diff tries so hard to find small code
fragments that moved around, that the diff overall becomes quite
unreadable and it seemed impossible to recreate the sequence of steps
after the fact.
It all started with adding the parsing for the GPS coordinates. But while
testing that code I found several issues with the rest of the function.
Most importantly it seemed ridiculous that we carefully tried to match the
texts that the DiveObjectHelper would create for the various fields,
instead of just using the DiveObjectHelper to do just that. And once I had
converted that I once again realized just how long and hard to understand
that function was getting and decided to break out some of the more
complex parts into their own helper functions.
But of course all this didn't happen in this logical, structured, ordered
way. Instead I did all of these things at the same time, testing,
rearranging, etc.
So in the end I went with one BIG commit that does all of this in one fell
swoop.
This adds four helper functions to deal with start time/date, duration,
location and gps coordinates, and depth of the dive.
To avoid mistakes when dealing with the GPS coordinates, there's another
helper to encapsulate the creation of the dive site and we switched to a
current GPS location.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we want to keep the selected dive "close" to where it was before an
operation (whether a delete, or a reload, or something like that), then
the most intuitive thing to do appears to be to select either the same
dive again (if it still exists), or one very close to it in time. This
helper allows us to identify the dive in the current dive list that is
closest to the given time.
We do this in the C code to ensure that we look at all dives in the
dive_table - based on the id that is returned the UI can then figure out
where this dive is currently shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The variables that control each CVA iteration should be declared at the start
of each loop so that the values are carried over from one iteration to the
next.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In our verision of VPM-B for real dives, we take as the deco time the
difference between the time of the deepest ceiling and the time when the
ceiling clears.
When the display of ceilings was set to multiples of 3m this was confused, as
the maximum finder had issues: First of all, it updated the time when the ceiling
was the same (which was almost always the case for stepped ceilings) but changing
>= to > was not enough, since then the first time a deepest stepped ceiling was
reached was used.
This patch uses the actual ceiling (not rounded to the next integer multiple of 3m)
for this calculation to get rid of this problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We first check the sha to see if we want to load at all. But at that
point we already have the repository and the branch and we have synced
with the remote. So when we decide that we need to reload from storage,
we don't need to repeat those steps, instead we can go directly to the
git load.
For that to work we need to pass the repository pointer and the branch
name back to the caller so that we can directly call git_load_dives().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With Linus' changes to the tree creation saving the dives is no longer
the dominant part of that process, so simplify the output (which also
removes the hacky buggy code to show the percentages that is of course
totally bogus).
(apparently a couple of white space cleanups snuck into this patch)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
John Van Ostrand reports that when he dives using two cylinders using
sidemounts, the per-cylinder SAC rate display is very misleading.
What happens is that since the two cylinders are used together (but
without a manifold), John is alternating between the two but not
actually adding gas switches in the profile. As a result, the profile
looks like only one cylinder is used, even though clearly the other
cylinder gets breathed down too.
The per-cylinder SAC rate calculations would entirely ignore the
cylinder that didn't have gas switch events to it, and looking at the
info window it would look like John had a truly exceptional SAC rate.
But then in the general statistics panel that actually takes the whole
gas use into account, the very different real SAC rate would show up.
The basic issue is that if we don't have full use information for the
different cylinders, we would account the whole dive to just a partial
set. We did have a special case for this, but that special case only
really worked if the first cylinder truly was the only cylinder used.
This patch makes us see the difference between "only one cylinder was
used, and I can use the overall mean depth for it" and "more than one
cylinder was used, but I don't know what the mean depths might be".
Reported-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's good that this is unused, because it does the calculations wrong.
Due to the gas compressibility the gas use calculations should subtract
the gas_volume() values at the differing pressures, not the pressures
themselves.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that gas switch events always have indices into the cylinder table,
start using that to look up the gas mix from the cylinders rather than
from the gas switch event itself. In other words, the cylinder index is
now the primary data for gas switch events.
This means that now as you change the cylinder information, the gas
switch events will automatically update to reflect those changes.
Note that on loading data from the outside (either from a xml file, from
a git/cloud account, or from a dive computer), we may or may not
initially have an index for the gas change event. The external data may
be from an older version of subsurface, or it may be from a
libdivecomputer download that just doesn't give index data at all.
In that case, we will do:
- if there is no index, but there is explicit gas mix information, we
will look up the index based on that gas mix, picking the cylinder
that has the closest mix.
- if there isn't even explicit gas mix data, so we only have the event
value from libdivecomputer, we will turn that value into a gasmix,
and use that to look up the cylinder index as above.
- if no valid cylinder information is available at all, gas switch
events will just be dropped.
When saving the data, we now always save the cylinder index, and the gas
mix associated with that cylinder (that gas mix will be ignored on load,
since the index is the primary, but it makes the event much easier to
read).
It is worth noting we do not modify the libdivecomputer value, even if
the gasmix has changed, so that remains as a record of the original
download.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit df4e26c875 ("Start sanitizing gaschange event information")
back about a year and a half ago, I started sanitizing the gas switch
event data, allowing gas switches to be associated with a particular
cylinder index rather than just the gas mix that is switched to.
But that initial step only _allowed_ a gas switch event to be associated
with a particular cylinder, the primary model was still to just specify
the mix.
This finally takes the next step, and *always* associates a gas switch
event with a particular cylinder. Instead of then looking up the
cylinder by trying to match gas mixes at runtime, subsurface now looks
it up when loading the dive initially as part of the dive fixup code.
The switch event still has an a separate gas mix associated with it, but
this patch also starts preparing for entirely relying on the gas mix in
the cylinder itself, by starting to pass in not just the event but also
the dive pointer to the routines that look up gas mix details.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some of the gas mix cleanups I'm doing are in code that uses const
pointers, and wants to use this.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gas switch event handling is somewhat fragile, mostly because the
legacy event encoding for gas switches is odd. It's also limited to
whole percentages, unlike our internal gas mix model.
In addition, it also ends up comparing the values to the raw permille
values, which is wrong for air, and wouldn't match our O2_IN_AIR which
is 209 permille (closest approximation to 20.946%).
So handle air separately, since "21" really is a valid oxygen value for
air, and should match 20.9%. And use the proper accessor functions to
get the gasmix values.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk says that divinglog hasn't been doing the linear pressure
interpolation for a long while, so we're doing extra dive fixups that
really aren't needed any more.
Also, the code is actually buggy: it only ever worked on the first
cylinder anyway (because only the first cylinder pressure_delta[] would
be initialized). That was probably perfectly fine in practice, since
it's unlikely that many tech divers used old versions of divinglog
anyway, so the bug per se isn't a reason to remove it - but it is a sign
that the code was a bit hard to read, so let's get rid of it if there is
no reason to maintain it or fix it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
