.. and add the usual logic to not save the default values.
This also simplifies the initial system-specific setup of both of these:
since we have defaults for all the preferences that get set up at
startup, we can just initialize those defaults to the system-specific
fonts then and there.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
.. and rename the badly named 'output_units/input_units' variables.
We used to have this confusing thing where we had two different units
(input vs output) that *look* like they are mirror images, but in fact
"output_units" was the user units, and "input_units" are the XML parsing
units.
So this renames them to be clearer. "output_units" is now just "units"
(it's the units a user would ever see), and "input_units" is now
"xml_parsing_units" and set by the XML file parsers to reflect the units
of the parsed file.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The legacy nickname wrappers (that use the device_info structure) are
left in gtk-gui.c. We can slowly start moving away from them, we don't
want to start exporting that thing as some kind of generic interface.
This isn't a pure code movement - because we leave the legacy interfaces
alone, there are a few new interfaces in device.c (like "create a new
device_info entry") that were embedded into the legacy "create nickname"
code, and needed to be abstracted out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have several places where we interpolate the depth based on two
samples and the time between them. Some of them use floating point, some
of them don't, some of them meant to do it but didn't.
Just use a common helper function for it. I seriously doubt the floating
point here really matters, since doing it in integers is not going to
overflow unless we're interpolating between two samples that are hours
apart at hundreds of meters of depth, but hey, it gives that rounding to
the nearest millimeter. Which I'm sure matters.
Anyway, we can probably just get rid of the rounding and the floating
point math, but it won't really hurt either, so at least do it
consistently.
The interpolation could be for other things than just depth, but we
probably don't have anything else we'd want to interpolate. But make the
function naming generic just in case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
o) Instead of using gradient factors as means of comparison, I now use
pressure (as in: maximal ambient pressure).
o) tissue_tolerance_calc() now computes the maximal ambient pressure now
respecting gradient factors. For this, it needs to know about the
surface pressure (as refernce for GF_high), thus gets *dive as an
argument. It is called from add_segment() which this also needs *dive
as an additional argument.
o) This implies deco_allowed_depth is now mainly a ambient-pressure to
depth conversion with decorations to avoid negative depth (i.e. no deco
obliation), implementation of quantization (!smooth => multiples of 3m)
and explicit setting of last deco depth (e.g. 6m for O2 deco).
o) gf_low_pressure_this_dive (slight change of name), the max depth in
pressure units is updated in add_segment. I set the minimal value in
buehlmann_config to the equivalent of 20m as otherwise good values of
GF_low add a lot of deco to shallow dives which do not need deep stops
in the first place.
o) The bogus loop is gone as well as actual_gradient_limit() and
gradient_factor_calculation() and large parts of deco_allowed_depth()
although I did not delete the code but put it in comments.
o) The meat is in the formula in lines 147-154 of deco.c. Here is the
rationale:
Without gradient factors, the M-value (i.e the maximal tissue pressure)
at a given depth is given by ambient_pressure / buehlmann_b + a.
According to "Clearing Up The Confusion About "Deep Stops" by Erik C.
Baker (as found via google) the effect of the gradient factors is no
replace this by a reduced affine relation (i.e. another line) such that
at the surface the difference between M-value and ambient pressure is
reduced by a factor GF_high and at the maximal depth by a factor
GF_low.
That is, we are looking for parameters alpha and beta such that
alpha surface + beta = surface + gf_high * (surface/b + a - surface)
and
alpha max_p + beta = max_p + gf_low * (max_p/b + a - max_p)
This can be solved for alpha and beta and then inverted to obtain the
max ambient pressure given tissue loadings. The result is the above
mentioned formula.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was just a crutch to get something out there for people to play with.
With the ability to input a plan in place this is now obsolete.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As the user enters data into the entry fields, that data is validated and
as soon as there is enough data we start constructing a dive profile,
including the final ascent to the surface, including required deco stops,
etc.
This commit still has some serious issues.
- when data is input that doesn't validate, we just print a warning to
stdout - instead we need to change the backgroundcolor of the input
field or something.
- when we switch to the last dive in order to show the profile we don't
actually search for the last dive - we just show the first one in the
tree. This works for the default sort order but is of course wrong
otherwise
I'm sure there are many other bugs, but I want to push it out where it is
right now for others to be able to take a look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We kept reduing all the deco calculations, including the previous dives
(if any) for each segment we add to the dive plan. This simply remembers
the last stage and then just adds to that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
actual planning
Yes, you can actually enter your segments now.
No, it's not wonderfully user-friendly. If you don't enter enough
segments to create a dive plan, it will just silently fail, for example.
And the <tab> key that should get you to the next editable segment
doesn't. And so on. But it kind of works.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This comes with absolutely no gui - so the plan literally needs to be
compiled into Subsurface. Not exactly a feature, but this allowed me to
focus on the planning part instead of spending time on tedious UI work.
A new menu "Planner" with entry "Test Planner" calls into the hard-coded
function in planner.c. There a simple dive plan can be constructed with
calls to plan_add_segment(&diveplan, duration, depth at the end, fO2, pO2)
Calling plan(&diveplan) does the deco calculations and creates deco stops
that keep us below the ceiling (with the GFlow/high values currently
configured). The stop levels used are defined at the top of planner.c in
the stoplevels array - there is no need to do the traditional multiples of
3m or anything like that.
The dive including the ascents and deco stops all the way to the surface
is completed and then added as simulated dive to the end of the divelist
(I guess we could automatically select it later) and can be viewed.
This is crude but shows the direction we can go with this. Envision a nice
UI that allows you to simply enter the segments and pick the desired
stops.
What is missing is the ability to give the algorithm additional gases that
it can use during the deco phase - right now it simply keeps using the
last gas used in the diveplan.
All that said, there are clear bugs here - and sadly they seem to be in
the deco calculations, as with the example given the ceiling that is
calculated makes no sense. When displayed in smooth mode it has very
strange jumps up and down that I wouldn't expect. For example with GF
35/75 (the default) the deco ceiling when looking at the simulated dive
jumps from 16m back up to 13m around 14:10 into the dive. That seems very
odd.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old implementation was broken in several ways.
For one thing the GF values are percentages, so they should normally be
0 < GF < 1 (well, some crazy people like to go above that).
With this most of the Bühlmann config constants were wrong.
Furthermore, after we adjust the pressure tolerance based on the gradient
factors, we need to convert this back into a depth (instead of passing
back the unmodified depth - oops).
Finally, this commit adds closed circuit support to the deco calculations.
Major progress and much more useful at this stage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are a couple of issues with this commit:
GtkEntry should emit the 'changed' signal when it is modified (so that
changes in the preferences get applied right away) - but that doesn't
appear to be working consistently.
Also, this doesn't appear to affect the deco of any dives that I try it
with. So my guess is something is wrong with the underlying deco
algorithm. That's diappointing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also initializes the N2 tissue saturations to correct numbers
(setting them to zero was clearly silly).
With this commit we walk back in the dive_table until we find a surface
intervall that's longer than 48h. Or a dive that comes after the last one
we looked at; that would indicate that this is a divelist that contains
dives from multiple divers or dives that for other reasons are not
ordered. In a sane environment one would assume that the dives that need
to be taken into account when doing deco calculations are organized as one
trip in the XML file and so this logic should work.
One major downside of the current implementation is that we recalculate
everything whenever the plot_info is recreated - which happens quite
frequently, for example when resizing the window or even when we go into
loup mode. While this isn't all that compute intensive, this is an utter
waste and we should at least cache the saturation inherited from previous
dives (and clear that number when the selected dive changes). We don't
want to cache all of it as the recreation of the plot_info may be
triggered by the user changing equipment (and most importantly, gasmix)
information. In that case the deco data for this dive does indeed have to
be recreated. But without changing the current dive the saturation after
the last surface intervall should stay the same.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Usually dive computers show the ceiling in terms of the next deco stop -
and those are in 3m increments. This commit also adds the ability to chose
either the typical 3m increments or the smooth ceiling that the Bühlmann
algorithm actually calculates.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For dives with more than 4 cylinders, the frame got very crowded and we
needed a magnifier to see the numbers.
If we used more than four tanks, let's put the info in another frame, if not, print
the OTUs, the maxcns and the weight sytem in the new frame.
There is still room for two more short data.
Changed naming of nitrox and trimix mixes.
Changed cylinder description.
There are issues with the size of some translations.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having two spots to toggle autogroup had always been a clear sign of
insanity. The inconsistent ludicrous semantic of when we remembered the
state of autogroup was even worse.
This finally gets rid of that disaster and drops the autogroup setting
from the preferences and makes it instead a per file property. When you
save a file, it saves the state of the autogroup toggle. This seems much
more useful - you may have files where you want to create trips by
default. And others, where you don't.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This clarifies/changes the meaning of our "cylinderindex" entry in our
samples. It has been rather confused, because different dive computers
have done things differently, and the naming really hasn't helped.
There are two totally different - and independent - cylinder "indexes":
- the pressure sensor index, which indicates which cylinder the sensor
data is from.
- the "active cylinder" index, which indicates which cylinder we actually
breathe from.
These two values really are totally independent, and have nothing
what-so-ever to do with each other. The sensor index may well be fixed:
many dive computers only support a single pressure sensor (whether
wireless or wired), and the sensor index is thus always zero.
Other dive computers may support multiple pressure sensors, and the gas
switch event may - or may not - indicate that the sensor changed too. A
dive computer might give the sensor data for *all* cylinders it can read,
regardless of which one is the one we're actively breathing. In fact, some
dive computers might give sensor data for not just *your* cylinder, but
your buddies.
This patch renames "cylinderindex" in the samples as "sensor", making it
quite clear that it's about which sensor index the pressure data in the
sample is about.
The way we figure out which is the currently active gas is with an
explicit has change event. If a computer (like the Uemis Zurich) joins the
two concepts together, then a sensor change should also create a gas
switch event. This patch also changes the Uemis importer to do that.
Finally, it should be noted that the plot info works totally separately
from the sample data, and is about what we actually *display*, not about
the sample pressures etc. In the plot info, the "cylinderindex" does in
fact mean the currently active cylinder, and while it is initially set to
match the sensor information from the samples, we then walk the gas change
events and fix it up - and if the active cylinder differs from the sensor
cylinder, we clear the sensor data.
[Dirk Hohndel: this conflicted with some of my recent changes - I think
I merged things correctly...]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to have the rule that a dive trip has to have all dives in it in
sequential order, even though our XML file really is much more flexible,
and allows arbitrary nesting of dives within a dive trip.
Put another way, the old model had fairly inflexible rules:
- the dive array is sorted by time
- a dive trip is always a contiguous slice of this sorted array
which makes perfect sense when you think of the dive and trip list as a
physical activity by one person, but leads to various very subtle issues
in the general case when there are no guarantees that the user then uses
subsurface that way.
In particular, if you load the XML files of two divers that have
overlapping dive trips, the end result is incredibly messy, and does not
conform to the above model at all.
There's two ways to enforce such conformance:
- disallow that kind of behavior entirely.
This is actually hard. Our XML files aren't date-based, they are
based on XML nesting rules, and even a single XML file can have
nesting that violates the date ordering. With multiple XML files,
it's trivial to do in practice, and while we could just fail at
loading, the failure would have to be a hard failure that leaves the
user no way to use the data at all.
- try to "fix it up" by sorting, splitting, and combining dive trips
automatically.
Dirk had a patch to do this, but it really does destroy the actual
dive data: if you load both mine and Dirk's dive trips, you ended up
with a result that followed the above two technical rules, but that
didn't actually make any *sense*.
So this patch doesn't try to enforce the rules, and instead just changes
them to be more generic:
- the dive array is still sorted by dive time
- a dive trip is just an arbitrary collection of dives.
The relaxed rules means that mixing dives and dive trips for two people
is trivial, and we can easily handle any XML file. The dive trip is
defined by the XML nesting level, and is totally independent of any
date-based sorting.
It does require a few things:
- when we save our dive data, we have to do it hierarchically by dive
trip, not just by walking the dive array linearly.
- similarly, when we create the dive tree model, we can't just blindly
walk the array of dives one by one, we have to look up the correct
trip (parent)
- when we try to merge two dives that are adjacent (by date sorting),
we can't do it if they are in different trips.
but apart from that, nothing else really changes.
NOTE! Despite the new relaxed model, creating totally disjoing dive
trips is not all that easy (nor is there any *reason* for it to be
easty). Our GUI interfaces still are "add dive to trip above" etc, and
the automatic adding of dives to dive trips is obviously still based on
date.
So this does not really change the expected normal usage, the relaxed
data structure rules just mean that we don't need to worry about the odd
cases as much, because we can just let them be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit makes deco handling in Subsurface more compatible with the way
libdivecomputer creates the data. Previously we assumed that having a
stopdepth or stoptime and no ndl meant that we were in deco. But
libdivecomputer supports many dive computers that provide the deco state
of the diver but with no information about the next stop or the time
needed there. In order to be able to model this in Subsurface this adds an
in_deco flag to the samples. This is only stored to the XML file when it
changes so it doesn't add much overhead but will allow us to display some
deco information on dive computers like the Atomic Aquatics Cobalt or many
of the Suuntos (among others).
The commit also removes the old event based deco code that was commented
out already. And fixes the code so that the deco / ndl information is
stored for the very last sample as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There is no point writing out divecomputer nicknames that do not exist
(or that match the dive computer model), so don't.
Also, make the function to do this static to save-xml.c, which is the
only user (I initially didn't _find_ the function to create the XML
string because it was illogically hidden in gtk-gui.c), and change the
calling convention to be more direct (pass in a string and return a
result, rather than modify a "pointer to string").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We only store the model/deviceid/nickname for those dive computers that
are mentioned in the XML file. This should make the XML files nicely
selfcontained.
This also changes the code to consistently use model & deviceid to
identify a dive computer. The deviceid is NOT guaranteed to be collision
free between different libdivecomputer backends...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now store the model information together with the deviceid and nickname
in order to be able to check if we have a record for any dive computer
with the same model (as that now triggers our nickname dialog).
This changes the format of the config entries for nicknames - the best
solution might be to just delete those and start again.
What is still missing is the code to store the nicknames in the XML file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having it there with the model information seemed to make sense but on
second thought it's the wrong spot to keep that information, especially
since we were storing it in the XML file in every single dive.
This change removes the nickname member from the divecomputer and makes
the rest of the code reasonably self consistent. It does not add much of
the new code for the new design to handle nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we havd divecomputer model and dive ID information available, use
that to match existing dives when trying to merge them.
Otherwise fall back to the fuzzy time-based merging logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We maintain a list of dive computers that we know about (by deviceid) and
their nicknames in our config. If the user downloads dive from a dive
computer that we haven't seen before, we give them the option to set a
nickname for that dive computer. That nickname is displayed in the profile
(and stored in the XML file, assuming it is not the same as the model).
This implementation attempts to make sure that it correctly deals with
utf8 nicknames.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I foolishly changed visible_columns in both the (ill-named) cns branch and
master...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conflicts:
divelist.c
gtk-gui.c
profile.c
We either pick the CNS reported by the dive computer at the end of the
dive, or the maximum of that and the CNS values in the samples, if any.
As usual, this column in the dive list defaults to off and it is
controlled by a setting in the tec page of the preferences.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can simply remember the state of all the preferences at the
beginning of preferences_dialog() and restore them if the user presses
'Cancel'.
Fixes#21
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the new members to the sample structure and fills them from
supported dive computers (Uemis SDA and OSTC / Shearwater Predator,
assuming you have libdivecomputer 0.3).
Save relvant values of this to the XML file and load it back. Handle the
new fields when merging dives.
At this stage we don't DO anything with this, all we do is extract them
from the dive computer, save them to the XML file and load them back.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This actually makes us internally use 'micro-degrees' for latitude and
longitude, and we never turn them into floating point either at parse
time or save time.
That said, the Uemis downloader internally does still use atof() when
converting things, which is likely a bug (locale issues and all that),
but I'll ask Dirk to check it out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit changes the code that was recently introduced to deal with
deco ceilings. Instead of handling these through events we now store the
ceiling (which in reality is the deepest deco stop with all known dive
computers) and the stop time at that ceiling in the samples.
This also adds support for NDL (non stop dive limit) which both dive
computers that appear to give us ceiling / deco information appear to
give us as well (when the diver isn't in deco).
If the mouse hovers over the profile we now add support for displaying the
NDL, the current deco obligation and (if we are able to tell from the
data) whether we are at a safety stop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was necessary for the Uemis downloader when we used the SDA file
format as intermediary data format and imported that as XML buffer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The initial downloader reused the XML parsing of SDA files that was
implemented early in order to support the information extracted from the
SDA with the java applet. But creating this intermediary XML file and
handing it off to the XML import function always seemed like an ugly way
to do things. This became even more obvious when adding more features to
the Uemis downloader.
This commit completely changes the downloader to instead create dives and
record them directly.
This also adds support for divespots (which are stored in a seperate
database that needs to be queried after the divelog and dive entries have
been combined - the Uemis firmware clearly was written by monkeys on
crack - oh wait: I'm trusting these same people to get the deco right?).
This commit leaves the SDA import capability in the XML parser intact.
I'll remove that later. Because of this it actually adds a few lines of
code, but the overall change will be a substantial code deletion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes the tripflag name array, since it's not actually useful.
The only information we ever save in the XML file is whether a dive is
explicitly not supposed to ever be grouped with a trip ("NOTRIP"), and
everything else is implicit.
I'm going to simplify the trip flags further (possibly removing it
entirely - like I did for dive trips already), and don't like having to
maintain the tripflag_names[] array logic.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Both dives and dive trips have the same 'tripflag' thing, but they are
used very differently. In particular, for dive trips, the only case
that has any meaning is the TF_AUTOGEN case, so instead of having that
trip flag, replace it with a bitfield that says whether the trip was
auto-generated or not.
And make the one-bit bitfields explicitly unsigned. Signed bitfields
are almost always a mistake, and can be confusing.
Also remove a few now stale macros that are no longer needed now that we
don't do the GList thing for dive list handling, and our autogen logic
has been simplified.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the dive trip auto-generation a separate pass from the
showing of the dive trips, which makes things much more understandable.
It simplifies the code a lot too, because it's much more natural to
generate the automatic trip data by walking the dives from oldest to
newest (while the tree model wants to walk the other way).
It gets rid of the most annoying part of using the gtk tree model for
dive trip management, but some still remains.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It had become a write-only field (apart from some now useless debugging)
when simplifying the remove_autogen_trips() function.
So remove it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already kept a count of dives per trip in order to figure out when
there are no more dives left and the trip needs to be freed. Now we
explicitly keep track of the list of dives associated with the trip too,
which simplifies the "find the time of the trip" logic.
We may want to sort it in time, but for now this is mainly about trying
to keep track of the divetrip relationships explicitly. I want to move
away from the whole "use the gtk tree model to keep track of things"
approach.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies the vendor/product fields into just a single "model"
string for the dive computer, since we can't really validly ever use it
any other way anyway.
Also, add 'deviceid' and 'diveid' fields: they are just 32-bit hex
values that are unique for that particular dive computer model. For
libdivecomputer, they are basically the first word of the SHA1 of the
data that libdivecomputer gives us.
(Trying to expose it in some other way is insane - different dive
computers use different models for the ID, so don't try to do some kind
of serial number or something like that)
For the Uemis Zurich, which doesn't use the libdivecomputer import, we
currently only set the model name. The computer does have some kind of
device ID string, and we could/should just do the same "SHA1 over the
ID" to give it a unique ID, but the pseudo-xml parsing confuses me, so
I'll let Dirk fix that up.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also knows how to save and restore multiple dive computers in the
XML data, but there's no way to actually *create* that kind of
information yet (nor do we display it). Tested by creating fake XML
files with multiple dive computers by hand so far.
The dive computer information right now contains (apart from the sample
and event data that we've always had):
- the vendor and product name of the dive computer
- the date of the dive according to the dive computer (so if you change
the dive date manually, the dive computer date stays around)
Note that if the dive computer date matches the dive date, we won't
bother saving the redundant information in the XML file.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now we only have one fixed divecomputer associated with each dive,
so this doesn't really change any current semantics. But it will make
it easier for us to associate a dive with multiple dive computers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to avoid some extra allocations by just allocating the dive
samples as part of the 'struct dive' allocation itself, but that ends up
complicating things, and will make it impossible to have multiple
different sets of samples (for multiple dive computers).
So stop doing it. Just allocate the dive samples array separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When this was first implemented the assumption was that a downloaded dive
that is to be merged with an existing dive would have the same time stamp.
But as Linus pointed out even back then, this does fail if a dive has been
merged with a download from a different dive computer before (think:
download from computer a, then download same dive from b, then improve
something in the parsing from computer a and try to redownload; the time
stamp could have changed).
This commit also fixes a silly omission in the merge_dives() function
(which ended up ALWAYS prefering the downloaded dive) and finally
implements the necessary changes to mark dives downloaded from a Uemis SDA
as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
THe Uemis SDA allows the user to set it up for salt water and fresh water
use. We should take this into consideration for the water pressure to
depth conversion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will hopefully not be something we need often, but if we improve
support for a divecomputer (either in libdivecomputer or in our native
Uemis code or even in the way we handle (and potentially discard) events),
then it is extremely useful to be able to say "re-download things
from the divecomputer and for things that were not edited in Subsurface,
don't try to merge the data (which gives BAD results if for example you
fixed a bug in the depth calculation in libdivecomputer) but instead
simply take the samples, the events and some of the other unedited data
straight from the download".
This commit implements just that - a "force download" checkbox in the
download dialog that makes us reimport all dives from the dive computer,
even the ones we already have, and an "always prefer downloaded dive"
checkbox that then tells Subsurface not to merge but simply to take the
data from the downloaded dive - without overwriting the things we have
already edited in Subsurface (like location, buddy, equipment, etc).
This, as a precaution, refuses to merge dives that don't have identical
start times. So if you have edited the date / time of a dive or if you
have previously merged your dive with a different dive computer (and
therefore modified samples and events) you are out of luck.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This introduces the notion of merging two disjoint dives: you can select
two dives from the dive list, and if the selection is exactly two dives,
and they are adjacent (and share the same dive trip), we support the
notion of merging the dives into one dive.
The most common reason for this is an extended surface event, which made
the dive computer decide that the dive was ended, but maybe you were
just waiting for a buddy or a student at the surface, and you want to
stitch together two dives into one.
There are still details to be sorted out: my Suunto dive computers don't
actually do surface samples at the beginning or end of the dive, so when
you stitch two dives together, the profile ends up being this odd "a
couple of feet under water between the two parts of the dive" thing.
But that's an independent thing from the actual merging logic, and I'll
work on that separately.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just re-organizes the dive merging code so that we expose a new
"merge_dives(a, b, offset)" function that merges two dives together into
one with the samples (and events) of 'b' at the specified offset after
'a'.
We'll want to use this if a dive computer has decided that the dive
ended (due to a pause at the surface), but we really want to just turn
the two computer dives into one long one with an extended surface swim.
No functional changes, but some independent cleanups due to the trip
simplifications.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
