well... we have a good and working printing system now. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think it's intuitive to do not warn if everything was according to the
plan, and keep the dialog open after a print was due is something that I
find it strange.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just adds the HTML Delegate to print the text.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The model was not being deleted when the table was, and thus we
recreated it for every print.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QPointer is a smart pointer, it will delete itself when the
refcount == 0.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know if this fixes anything, but it is asked of us to
do that by the Qt docs.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a HTML delegate to show rendered HTML on print.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This converts the get_gas_from_events to a get_gas_at_time function that
actually maps our events to what cylinder and thus gas we are breathing
at that time.
[Dirk Hohndel: fixed to actually use the gas that was looked up
(and make things compile)]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
current_dive is the selected dive, and displayed_dive is the one we are
currently drawing. They are quite often the same one, but not in the
case of adding a dive for example.
This fixes potential null pointer dereferences in the case of a blank
divelist, and makes sure we use the correct data in the case of adding
and planning dives.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Get rid of unit type shortcut in planner. Also use "to" instead of "-" in ascent rate intervals.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
is_cylinder_used uses get_cylinder_index as underlaying function that
does the right thing with with respect on how to find the closest
matching cylinder, and handles both types of gaschange events correctly.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds two changes
a) it uses rint() to make sure we don't truncate the displayed values
b) it moves the update of the displayed values into a helper function that
is also called whenever the settings change
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 4.0 we hide all gaschange events during the first 30 seconds,
not just gaschange events on second 0. Eg, the OSTC3 emits its gaschange
event on the first sample, which can be 2, 10 or 30 seconds into the
dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace get_gasmix_from_event and get_gasidx with get_cylinder_index.
get_cylinder_index actually knows about both types of gaschange events
and the difference between them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the info box, we can't use the event data, because its not 1:1
mapped to whats in the cylinder and what we actually switched to. Use
the plot_data here we already calculated what we are switching to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The values for drop_stone_mode, bottomsac, and decosac are typically the
kind of personal data specific to a diver that is unlikely to change
from one dive plan to the next.
This patch stores/restores them to/from the preferences file. For this,
it adds bottomsac and decosac to the prefs structure; drop_stone_mode
was already there, though not stored/restored.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Calculating the timezoneoffset for the current date really makes no sense
whatsoever when displaying a time that isn't "now".
Fixes#605
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we had a trip selected, we ignored that and simply called
the DiveAdd functions, but the mainTab code that deal with selections
to show one or more dives or trips asked how many trips were selected
to the DiveList, and since a trip was selected things go kabum.
Fixes#606
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile was still the planner one, so we need to force
a replot.
Fixes#621
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not use MainWindow::instance() inside of a non-static
mainWindow method, that's just bogus.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ugh. Each time you wanted to change a cylinder, a new connection was
being created on this object, delaying the correctly setup of the item.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When you entered part of the name of a cylinder this was
being treated as a new cylinder, and not selecting the first
one.
Fixes#628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a 'Use default file' button on preferences in a way
that doesn't clutters the interface.
Fixes#630
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We save an HTML table-based plan, so we need to get the text as html,
not plaintext.
Fixes#634
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- set application-wide locale from preferences
- use custom date format for display
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The access manager is only one, while we can make requests from
different parts of the application, so relying on the manager
finished() signal to see if something was done or not was a
not very good move.
The QNetworkReply is created when a get() is invocked on the
AccessManager and that's unique. connect it's finished()
signal instead.
bonus: code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- apply vertical layout to top-level dialog. This solves label clipping
- call adjustSize() on dialog to fit all labels (translated text could
be longer than original)
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were actually searching dives which match the dowloaded position
fixes. So we're also trying to take into account if the fix is automatic
or no based on a limited amount of predefined strings (bad idea, as the
user can change in companion app settings the predefined string).
This way, in actual implementation, if program concludes that a fix has
been manually got or, simply, the user is unlucky enough to have all the
position fixes out of the dive time, find_dive_n_near() function will
pair fix and dive in an ordered way (1st fix -> 1st dive; 2nd fix -> 2nd
dive ...) which is probably erroneous, except for manual position fixes.
BTW actual implementation can't pair the same gps position with more
than one dive, which would be the case, e.g. in repetitive dives while at
anchor in the same point.
The patch changes the logic:
- Search positions for defined dives (instead of dives for defined
positions) without care if position has manually or automatically been
set.
- Only take care of those dives that don't have a position yet.
- It makes two assumptions:
a.- If the position fix has been taken during the dive time, is
correct. If there are more than one inside the dive time, takes the
first one (closest to the DC's reported time).
b.- If not during diving time, the correct one is the nearest fix
before the dive begins (also the usual case if manually fixed from the
smartphone just before jump into the water). But will work too if there
is only one fix *in SAME_GROUP range* after the dive (another usual
case).
- Finally, as copy_gps_location() in dive.h is used only here, let it
take care of naming the dive if user hasn't named it yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In reality we have no concept for handling those, yet. But the UI doesn't
prevent the user from entering multiple cylinders with the same gasmix, so
we need to help the user to get rid of them as well.
If the user attempts to remove a cylinder we check if there's a second
cylinder with the same gas. If that's the case then we can proceed and
remove the cylinder the user wants to get rid of without losing that gas
for the dive. The only tricky issue is that we need to make sure that if
we remove the first cylinder that one is actually replaced with one with
the same gas.
Fixes#622
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
updateDive() cannot reset the changed status - this is called while the
dive is edited. Instead this status is reset when the user either accepts
or rejects the changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We keep getting this wrong. First you check all selected dives that are
not the current dive, make sure the equipment was the same before the edit
and then apply the changes. Then, when you are done with ALL of them, then
you change the current dive. Otherwise you cannot compare to the 'before'
state anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a fun little bug. Tomaz pointed me in the right direction. The UI
restructure with the displayed_dive had another unintended side effect
here. It is not valid not to set up the widgets just because the dive_list
is empty. The displayed_dive isn't on the dive_list until it is saved - so
while the user is adding or planning a dive, we still need to show the
equipment widgets.
Fixes#614Fixes#601
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oh boy, this should allow for altitude in 'ft' as well.
I set an arbitrary cutoff at 3000m (and switched things to increments of
10m for the altitude).
Fixes#629
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will make more easy to move code around in the future.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the code that saves and restores the dive planner
settings.
Fixes#608
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The text selection was not being set, bummer.
See #628
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Q_FOREACH will expand and already creates a copy of the
contained container, so this is just a waste of cpu cycles
and also increases a tiny bit the memory consumption.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This causes all kinds of assumptions to go wrong - and it makes no sense.
Move the point to where you want it or cancel the plan.
Fixes#623
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit b0da8c2707 ("When adding a waypoint, use the gasmix of the
_next_ waypoint.") we default to air when adding a waypoint at the end of
the plan by double-clicking. That seems silly since we could instead
continue using the last gas.
I wasn't able to reproduce the "gas list disappears" problem in bug #623,
but I did get a silly air segment added which was equally wrong. Maybe I'm
lucky and this fixes the problem that Henrik sees as well...
See #623
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I cannot reproduce the problem, but adding one more call to
unselectDives() should ensure that all dives are marked as not selected
before selecting the last dive that was downloaded.
See #620
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes sure that YAxis is not expanded to cover heart rate
when it is displayed on profile panel.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dive photos are copied to the photos directory on export. The photos
section appears only if photos exist.
C++ helper functions are added to copy images to the photos directory,
Additionally the photos directory must be passed as a parameter to the
write_one_dive function to save photos to it. Some options structure may
be needed instead of passing many arguments.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The filter menu wasn't connected to anything other than a debug print.
This removes that menu.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I prefer that we show the first tab by default. Everyone should remember
that Qt Creator changes the currently shown tab as default on save.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't like that the event structure includes the variable length array.
That really makes it a pain to change the name of an event (on the flip
side, freeing events is easier I guess).
Anyway, to correctly rename an event we need to actually remove the event
from the correct dc and then add a new event with the new name. The
previous code was insane (it only worked if the new name was of smaller or
equal length, otherwise it had a beautiful buffer overflow).
And of course we need to do this both for the current_dive and the
displayed_dive.
Fixes#616
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use a macro that works to get the current DC.
Fixes#613
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We signal a bailout to OC via setting the setpoint to zero. A setpoint
between 0.2 and 0 would be really wierd, but i couldn't figure out any
better way to keep the bailout deco planning.
Note:
The gas consumption of CCR dives are plain wrong, but this atleast lets
you plan your deco for a CCR bailout plan.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the Set point spinbox, it was kinda hard just stepping by the
default 1.0, so setting it to step by 0.1 makes much more sense.
The int SpinBox got a step size parameter for consistency.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous code used qreals, but it feels clearer to use doubles when
the name of the class contains the word double. The performance loss of
using doubles instead of floats on arm is non-existent in this case.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes simple copy-paste error that the DoubleSpinBoxDelegate range
was stored as int, thus rounding min value from 0.2 to 0.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When adding the method that includes the depth unit to the DiveItem class
I realized that this was yet another implementation of our depth unit
conversion. We should just call the existing helper instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least for my dives there wasn't enough space for depth and duration in
the header, most likely because I made the last two columns smaller to
create more space for tags and suit.
With this commit the depth and doration in the header now spans two
columns and easily fits.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
use setPointSize instead of setPixelSize to make it device independent,
also reduced a bit the size of the font.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can use QPicture to record the painting done by a QPainter and it will
be saved in vector format, then we can simply paint that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All animations are now on the Animations namespace, which resulted in a
bit of code cleanup, which is nice.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This seems to be needed for the correct print of the profile,
What was happening on the print code was that the profile even in print
mode was doing animations, and we were getting a frame of it and trying to
print it.
Also, a bit of code cleanup.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old layout tried to add the search on top of the help view, which
didn't really work because of the way that the QWebView rendered: we got
garbage after a scroll with the find opened. So now I'v created a QWidget
and layed down the QWebView and the search bar vertically.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on Glance's idea on rewritting the Delegates, but
we don't need to redo the wheel as Qt already gives us
the correct Delegate, we just need to set some boundaries
on it before returning.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know why the plot_info was walked backwards - for our purposes
walking forward needs to make a lot more sense. And the event nicely goes
away when the diveplan gets modified and the displayed_dive gets reset.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
affects mainly capitalisation on the dive list context menu
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makse capitalisation consistent.
Makes title more specific
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Makse capitalisation consistent.
Makes title more specific
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix labels view in dive profile.
Add Jqplot css file to the exports.
The css files fix the view and enahnce the plot.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code hoocks the pictures with the preferences change.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The export dialog was being created but never free'd.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new macro hides all 5 lines of code from the old code to just one,
since we already have 15 buttons and more are comming, and *every*
code is just the same, it's a logical change that will make us reduce
now 75 lines of code to just 15, in the future this can be bigger.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the toggle picture button and hoocks
it up with the rest of the code. I'v also changed a call
from ProfileWidget because it caused errors on the ui
generated code, where it would try to call an still-to-be
instantiated object.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For consitency in the UI
There are plenty more of these to find, and once in a while
"Temperature" looks more apropriate, like in a title, but most
of the time "temp." works best.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
