qmlprefs::setCredentialStatus() basically only does something when called with
CS_NOCLOUD.
A number of setCredentialStatus() calls happen where status cannot be
CS_NOCLOUD, and therefore setCredentialStatus() can be safely replaced with
set_cloud_verification_status()
This limits the use of qmlprefs::setCredentialStatus(), but there are still a
couple of more complicated calls.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace all credentialStatus() with cloud_verification_status()
Where both prefs.credentialStatus and
PrefCloudStorage.cloud_verification_status are being set, remove
prefs.credentialStatus.
These replacements are valid since credentialStatus() is a simple
envelope over cloud_verification_status().
Also remove qmlPrefs::credentialStatus() from qmlPrefs (mostly to ensure no
replacements was forgotten).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove m_credentialStatus in qmlpref, but let the setter/getter
stay, using qPrefCloudStorage::cloud_verification_status()
instead.
This change ensures that qmlPrefs:credentialStatus() returns the
same as qPrefCloudStorage::cloud_verification_status(), and the
setter/getter of credentialStatus can later be removed safely.
This is a "checkpoint" to ensure everything works without a temporary
credentialStatus. No code part depend on the difference between
qmlPrefs::credentialStatus() and
qPrefCloudStorage::cloud_verification_status(), but the code reference
both.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove use of prefs. (apart from instanciating the object) in
main.qml
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the divelist is only visible if online/offline (CS_VERIFIED/CS_NOCLOUD),
there is no need to check that to enable "Add dive manually".
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manual sync was enabled both for CS_VERIFIED (online) and CS_NOCLOUD (offline)
and then in the trigger CS_NOCLOUD lead to a login screen, potentially
confusing the user.
Only enable manual sync with verified cloud credentials.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs. is only important during the signin process, so use the standard
PrefCloudStorage variable
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin does only have the values "" and NULL, so replace cloudPin()
with "" in csa->backend() call
remove setting of cloudPin to ""
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin is only set to "" and NULL, therefore and "if" checking if
cloudPin is not empty will never have affect.
Remove else part.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move verifyCredentials() from public slots to private, eliminating
the need to MOC and making the C++/QML interface on function less
complicated.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add pin parameter to saveCredentials() thereby having all info about
credentials in one function call.
Add "" as pin in saveCredentials() - main.qml, when verifying
credentials.
replace verifyCredentials() with saveCredentials() in the register
button on the pin page.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clearCredentials() was only called from one place (in the same file), copy
functionality and remove function.
It was declared as a public slot, so this saves a little bit of overhead too.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cancelCredentialsPinSetup() is no longer used, so remove it.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Copy functionality from cancelCredentialsPinSetup() into Cancel in
CloudCredentials.qml, this is part of the general qmlprefs cleanup.
Remove rootItem.returnTopPage() since the user stays on this page
(sees credentials again).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now just copy the functionality into Settings.qml, this is part
of the qmlprefs cleanup.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These were again copied from the material design icon set and will be used to
differentiate the various help topics.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The global drawer already has a name that can be referenced. This was adding
confusion as now both names were used in the menu structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user is most likely to find out, that he does not remember
the password, when asked for it.
Add "forgot password" button in the signin dialog
(both credentials and pin dialog).
Signed-off-by: Jan Iversen <jan@casacondor.com>
rightPadding seems defined in Kirigami and the default value
causes a binding loop.
set rightPadding directly.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add "Dive planner" menu entry in GlobalDrawer/Developer
with 4 subitems one for each diveplanner pages.
Developer is chosen in order to allow interested access to
pages, without raising expectations for the normal user.
That allow a step-by-step implementation
Signed-off-by: Jan Iversen <jan@casacondor.com>
Diveplanner consist of 3 pages:
- Edit, creation of the plan
- View, view the plan
- Manager, list/delete/select stored diveplans
With the current navigation system (pageStack)
View needs to be split in multiple pages.
Signed-off-by: Jan Iversen <jan@casacondor.com>
standard font-size as well as color are set
in the template (but can be overwritten in
the object)
Using TemplateComboBox allows central change of how
labels are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
standard font-size as well as color are set
in the template (but can be overwritten in
the object)
Using TemplateCheckBox allows central change of how
labels are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
standard font-size as well as color are set
in the template (but can be overwritten in
the object)
Using TemplateRadioButton allows central change of how
labels are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
standard font-size are set in the template (but can
be overwritten in the object)
Using TemplateSpinBox allows central change of how
spinBoxes are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
standard font-size as well as color are set
in the template (but can be overwritten in
the object)
Using TemplateLabel allows central change of how
labels are presented in the UI.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
TempleSection is a clickable rectangle that contains
information.
It is used to
- group information
- hide/unhide details
And are an important building block in decluttering small
screen, while showing all information on bigger screens
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit a4d299e01e ("mobile-widgets/qml: use showPin/oldStatus consistently")
one instance of rootItem.showPin wasn't replaced with prefs.showPin and as a
result we had a very strange password entry line in the middle of the PIN entry
screen.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
StartPage does not belong in divelist.
Remove startPage from diveList and anchor in main.
Make needed functional changes.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveList should not depend on StartPage, so remove references to
startPage.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instanciate DiveList like all the other pages.
Move DiveList properties set in main to DiveList.qml
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setupActions() in StartPage contained a mixture of StartPage
actions and DiveList actions.
Split setupActions to be pure.
However currently StartPage is embedded inside DiveList so the
action onVisibleChanged must be simulated.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
manager.finishSetup() have nothing to do with startpage/divelist,
but belong in main (seeing main as responsible for setup and window layout).
Move onCompleted functionality to main.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPassword is no longer used as a temporary variable
Remove cloudPassword from QMLPrefs.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudPassword with PrefCloudStorage.cloud_storage_password in QML
Replace QMLPrefs.....cloudPassword with PrefCloudStorage::cloud_storage_password in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudUserName with PrefCloudStorage.cloud_storage_email in QML
Replace QMLPrefs.....cloudUserName with PrefCloudStorage::cloud_storage_email in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user asked to change credentials it is equivalent to a signout,
so no need to store old credentials. This simplification allows removal
of the temporary credentials in qmlPrefs.
this commits secures the user is locked in the login page, until one
of 3 things happen:
- enter verified credentials (divelist is loaded from cloud)
- select no-cloud mode (divelist is loaded from local)
- enter new credentials, PIN page shows, enter PIN or
cancel (back to enter credentials).
This is consistent even if the program is restarted.
Old version had a non consistent way:
A user enters new credentials,
sees the PIN screen,
but does not receive the email immediately,
so works with other applications (causing the mobile app to close)
Having received the email with the PiN,
the user starts mobile again,
BUT does not see the PIN screen, instead the old credentials are used.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call saveCredentials with username/password to avoid first
setting the two and then calling.
Change saveCredentials() to use newUser, newPassword.
Signed-off-by: Jan Iversen <jani@apache.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
Remove aliases for showPin/oldStatus and reference prefs.showPin/oldStatus directly.
showPin/oldStatus are "temporary" variables, that are not saved in settings,
so they easily be replaced
Signed-off-by: Jan Iversen <jani@apache.org>
In order to make the central CMakeLists cleaner and more consistent
add a CMakeLists.txt to mobile-widgets, like in other root directories.
Signed-off-by: Jan Iversen <jan@casacondor.com>
change prefs.cloudUserName to PrefCloudStage.cloud_storage_email.
This is slightly more effective (direct instead of indirect), and
reduces the use of prefs.
This is part of limiting the use of prefs. (which is a precessor to
qPref) to the login process, and ultimately remove it.
Signed-off-by: Jan Iversen <jani@apache.org>
set_default_cylinder is accepted, because it is defined in Qt Meta system,
however the call is never carried out, because the Q_INVOKE macro is missing
Change PrefGeneral.set_default_cylinder(...) which is a function call
to PrefGeneral.default_cylinder = ... which is a builtin assignment
Signed-off-by: Jan Iversen <jani@apache.org>
LOG_STP is on longer providing the data needed, since a lot of the startup
is indirectly in QML, furthermore using the xcode project and running profiler
gives much more detailed information
Signed-off-by: Jan Iversen <jani@apache.org>
Remove "TO BE IMPLEMENTED" and add call doUpload
Connect signal to signal in QMLManager to avoid registring the
upload class.
Signed-off-by: Jan Iversen <jan@casacondor.com>
When opening the saveAsDialog a second time, it contains
the last status from first time.
Clear statusText before calling saveAsDialog
Signed-off-by: Jan Iversen <jan@casacondor.com>
When using Connect, the context is switched, so close()
might or might not work.
Change unqualified close() to qualified uploadDialog.close()
Signed-off-by: Jan Iversen <jan@casacondor.com>
Handle reading/writing of userid/password settings in the
saveAsDialog and set field to visible when needed.
Activate divelogsde radio button
Signed-off-by: Jan Iversen <jan@casacondor.com>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The current png generation is intertangled with the desktop
UI, and a shared Webservice needs to be developed.
Block Radiobutton
Signed-off-by: Jan Iversen <jan@casacondor.com>
The current Webservice implementation is intertangled with the desktop
UI, and a shared Webservice needs to be developed.
Block Radiobutton
Signed-off-by: Jan Iversen <jan@casacondor.com>
DiveFilter have 2 implementation on or desktop and one for mobile,
the common export function uses DiveFilter (desktop version).
Block Radiobutton
Signed-off-by: Jan Iversen <jan@casacondor.com>
All exports are to file except 2 which are upload to web.
Integrate standard qml filedialog for all exports (minus 2).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Prepare page for exporting the diveLog (feature currently
only in the desktop version).
Add Radiobuttons to select type of export
also add "anonymize button"
and a "explain" text field
Subsurface-mobile does not allow selection of dives, therefore
export will always be all dives
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add enum with different export types (used to signal which type
of export QML desires).
Add QML export functions (one for file and one for upload to web)
Signed-off-by: Jan Iversen <jan@casacondor.com>
qml demands all qml files to be in 1 directory, but allows
a "qmldir" file to reference qml files in other directories.
Add qmldir to reference map-widget.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Making this persistant creates a very unpleasant user experience.
And if a dive computer needs this setting, we really want people
to report this to us so we can fix it.
Fixes: #2358
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
default parameter values is not supported as this syntax was introduced
in ECMA-262 6th edition while QML only implements the fifth edition
(as of Qt 5.11).
remove default parameter and check for undefined instead.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is even easier and more obvious than copying the logs on the About page
and then manually creating an email and pasting those logs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When we change the filter string, we need to make sure that the collapsed model is
also aware of the change.
Similarly, instead of just calling resetFilter and directly changing the core
data structures, we need to set the filter to the empty string which ensures
that all three models get notified and the view updates correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
