If user selected a new dive site (a dive site that doesn't
exists yet, to be created) and clicked in edit it would edit
the *old* dive site. this is not optimal, but since it
removes a severe regression it will be like this (I won't
change it till 5.0) for a while, until I have time to
actually code something not messy for that.
The current dive location management is *much* nicer than
the old one, code-wise. No more magic numbers, magic codepaths,
magic constants, qt black magic. It's straigth-forward code
simple to follow, simple to edit.
This was something I was actually postponing for 5.0 but I
managed to get a boost of subsurface time at work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the message to 'This dive site is being edited' was
being show while the popup to choose the dive site, the
line edit was being covered. now it correctly moves to
the correct place.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unused dead code / hack for the old QCompleter
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you select a dive site with a different uuid than your
current dive.dive_site_uuid, you should get a different
pallete to state clearly that something changed.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only set the currType and currUuid if text changed.
This is needed because if you hit key_down it would
set NEW_DIVE_SITE because a keypress on the lineedit was
due.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Start to make this thing usefull: Upon selecting the current index
or writting something on the line edit, we need to set the dive site.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Space and tab should select the item in the itemview and hide
it; enter and return also do that automatically.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The line edit wasn't being properly updated regarding its
paint event. Turns out it was because it received a focus
out event and then stopped refreshing the paint.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Connect the view activated signal to send us the index.
Removing debug output that I forgot inside it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Keypress management is one of the main functions of the completer, so we
must create an event filter and hook things up properly.
key esq / enter should close the popup (and not leave us with a popup open
and no way to close it - it breaks X)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The popup should be shown beneath the QLineEdit. this code here
is shamelessy stolen from the QCompleter source code because I
really didn't want to rethink the correct way of doing this.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was missing in the delegate - now it's prettier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since I removed the old location edit from the UI, I also need to
remove a bit of code from the UI that was calling it.
fix a few crashes regarding the old location edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the bare minimum skeleton of the new completer for the dive site
management. Nothing works, yet, nothing is hoocked up, yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They are useful to show when trying to figure out what's going on, so just
move them behind a check for verbose.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It turns out that I forgot to make sure that the progress bar is shown if
the user has things set up so that the cloud storage is the default dive
file that they open.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the authentication check and cloud server availability check which
are different from the one git does. The mechanism for overriding things
is different from there, but this should work just as well.
We intercept the SslErrors signal and if we get the known good hash for
our certificate, we simply call it good.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the whole idea of calling these functions through the MainWindow
instance is atrocious, until we change the architecture of all this
refreshProfile() is a useful function to have.
In order to make this cleaner to implement I allowed an argument to
ProfileWidget's replot() which allows picking a specific dive. By
defaulting this to 0 we get the previous behavior when calling replot()
without an argument.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch changes the dive merging to be much more careful about
things, because it turns out that we had several small oddities that
caused big merge issues.
The oddities are:
- the dive "duration" is actually how long we spend under water.
But that means that when we do "dive->when + dive.duration.seconds"
to calculate the end of the dive, that is nonsensical if you came up
to the surface in the middle of a dive.
Now, normally you don't see profiles like that, but once you start
merging dives together, it can go from "small detail" to "dominant
factor".
- We have two different cases of merging: the automatic "merge new dive
computer download if it looks like the same dive" (which always has a
merge offset of 0, since we merge it as a new dive computer) and the
"merge two different dives into one longer dive.
The code assumed that it could look at the "downloaded" flag for the
dive to check one or the other, but that doesn't really work.
Reading a dive from an XML file isn't any different from downloading
it.
So we need to change the logic to determine what kind of merge it is
to actually check the passed-in time offset.
With this, Stuart Vernon's test-case of eight dives with short surface
intervals in between end up merging correctly into one dive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Stuart Vernon <stuartv@force2.net>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems this has never worked and nobody ever tested it. There was some
confusion with time zones since Qt takes by default local time when
converting from/to epoch while the exif library used UTC.
For my single test dive, this works now. But this needs more testing!!!
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not quite sure why this works, but it appears to do the trick.
Apparently you are supposed not to have the meta type declaration in a
shared header file. Also, with Qt5.5 you can't have the declaration for
QBluetoothDeviceInfo, not even on Windows.
This may need more tweaking to make sure it works on all combinations of
OS and Qt version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Passing the cloud URL to the file select box leaves "git syntax" in the
filename which makes us look for a directory with a git repository in it
and give non-sensical error messages to the user.
With this we simply use the users email address as local filename with a
.ssrf suffix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic to pick the initial dive ID for the uemis downloader was very
confused, and did not work at all when restarting a download when the
Uemis filled up, and the "Force download all dives" flag was set. It
also required a rather odd Uemis-specific callback from the download UI
because of how it picked the initial ID.
This changes the logic to just look at the list of downloaded dives when
restarting, which simplifies the logic a lot, gets rid of the odd
special callback, and also means that the whole "Force download" issue
just goes away. It seems to work now.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On some Windows platforms when we convert a Bth address to a String
it is formatted as "(XX:XX:XX:XX:XX:XX)". Therefore we first try to
remove the round parentheses and finally we truncate the string
to 17 because there are 6 two-digit hex values and 5 colons.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Spell Setpoint without space in user visable strings.
Explain authorized_paired.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now inplace edit is supported, so enable editing the "Default"
statistics template, Also show warning when editing this template.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a bundled template show warning message.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Edit the templates into the same file, which is more intuitive as
Custom.html is a bit confusing.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current way that facebook works is terrible: it's scattered
around tons of files ( at least 4 different files and classes )
this moves things around a bit, add a disconnect button that
was missing, cleans tons of code and fix inconsistencies.
I will also redo this part for 5.0, but it's too late for 4.5
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unify spelling of this name in strings shown to the user, as commented
in mailing list. Internal coding use untouched.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our OSTC 3 config code works for all hwOS devices, so be more clear when
saying that as the chooser option.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
