TabDivePhotos::saveSubtitles() had an unused local variable.
Clearly a copy&paste oversight.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to have the view in item-selection mode, since
each picture represents a row. Thus we can remove a few lines
of code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The date and time fields of the main tab posted undo events
for every date/timeChanged signal. Thus, when changing the
day of the month to e.g. 21, this would result in two date
change events: one to the 2nd and one to the 21st. This is
very irritating.
Instead listen to editingFinished() events, which thankfully
exist for these widgets.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder-based statistics where not updated when an undo
command edited cylinder data. Do so.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The SAC rate, etc were only updated when switching between dives.
They should always be updated when an undo command changes (adds,
edits, removes) the cylinders of a dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It was suggested in a review of a previous patchset that we should
capitalize the use of "use dc" to "Use DC" - but if we were going
to do that we should do it everywhere, not just in the one place.
This is the followup to do that.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
In the code, the difference between SALTYWATER and SALTWATER is hard
to see. More importantly, in the UI - Brackish is the word for water
that has more salt that freshwater but less salt that seawater. The
docs already use the word to clarify what is meant.
These can be useful in a printed divelog, especially if the
log entry is also showing weight and exposure suit.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
The DiveListView had a singleSelectedTrip function that
returns the selected trip if exactly one trip is selected.
This could be very slow if numerous non-trip items were
selected, because all the selection indices were back-
translated by the proxy model.
This could make selection changes very slow, because the
MainTab used said function to determine whether it should
show trip or dive data.. Indeed, with a 3500 dive test log,
when selecting all dives in tree mode, the updating of the
TabWidgets is sped up from 130 ms to 5 ms this commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a mix of ProfileWidget2::replot() and
ProfileWidget2::plotDive(current_dive, true), which is equivalent.
Since there was more of the latter and it is more flexible, unify on
that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 2021035cfc a bug was introduced:
currentTrip of MainTab was not set in trip mode. Thus, when editing
the trip notes, the notes of all selected dives were edited instead.
Set the member variable and not a local variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive mode is changed, the profile has to be replot. This
is by a function of the TabDiveInformation. However, that function
was also executed when populating the tab. Thus, when changing dive,
the profile was plot twice.
Move the profile plotting out of the function. Ultimately, the profile
should listen to the appropriate signals itself.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To check wether the tab widgets should show the trip view, they called
the selectedTrips() function. The trip view was shown if that contained
only one trip. However, the selectedTrips() function was very slow,
because it has to query to core models.
Change the function to singleSelectedTrip(), which returns a trip
if there is exactly one trip selected. The function returns early
if there is more than one trip selected. This makes the select-all
case much faster.
There are two cases which are still very slow:
- List mode, because here all top-level items are queried.
- Dive log with many only top-level items.
Ultimately, we will have to cache the trip selection because
querying the model is too slow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
TabDiveInformation::updateProfile() does some statistics via the
per_cylinder_mean_depth function. It passes down arrays with one
entry per cylinder, which are allocated by means std::vector.
To pass the array, the expression "&vector[0]" is used. It seems
like some compilers through an assertion violation if vector
has no elements. They are technically correct in that this is
undefined, but still this appears like very unfriendly behavior.
After all, std::vector should behave just like a dynamic C-array
that is automatically freed, when going out of scope.
Replace the "&vector[0]" by "vector.data()" and don't do the
call if there aren't any cylinders for good measure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the more commonly used filter to the left and the less
commonly used "purge unused sites" button to the right. Add
a spacer so that the filter-textbox doesn't extend over the
whole free space.
With apologies to sinistroverse users (is there an option to
make the layout direction depend on the locale?).
Suggested-by: Hartley Horwitz <hhrwtz@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing cylinders or weights directly in the table widgets,
no warning was shown if multiple dives were affected. To solve this,
emit signals from the respective models and catch them in dive
equipment tab. Not very nice, but it works for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was only one editMode left (MANUALLY_ADDED_DIVE).
Therefore replace by a flag. This makes the code more consistent,
because the conditions "editMode != NONE" and "editMode ==
MANUALLY_ADDED_DIVE) actually meant the same thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editMode was set to IGNORE_MODE when programatically setting
fields so that we can ignore changed-signals.
That seems to be orthogonal to whether we are in edit mode
and indeed when setting IGNORE_MODE the edit mode was
saved and restored.
Therefore, replace the IGNORE_MODE by an independent ignoreInput
flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
That mode is not used anymore, since only the editing of
profiles of manually added dives enters editing mode. For
that case we have the MANUALLY_ADDED_DIVE edit mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All remaining callers were passing MANUALLY_ADDED_DIVE as a new
mode, so we may just as well remove the parameter and thus
simplify the logic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only way to enter edit mode is to edit the profile. However,
that means that the profile is already visible, so there is no
need to change the mode. Simply remove the EDIT mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit state is now only used to edit the profile. There is no
reason to disable random tabs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editing of the dive site is controlled via an undo command.
No point in centering the map when cancelling a profile-edit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This stored the old editMode. However, it was not read after
editMode was changed, so there is no point to it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The "dive is currently" edited is only shown when the profile is
edited. This affects only the current dive and therefore a
message saying that multiple dives are edited makes no sense.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When enableEdition() was called with mode == NONE and the dive
was a manually added dive, it would call into MainWindow::
editCurrentDive(), which would in turn call enableEdition(),
however with another mode. Since the only caller of
enableEdition() is now editCurrentDive() anyway, we can
remove that weird code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since cylinders are now edited using the undo system, these
functions are not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of connecting to the remove() function of the model,
call the removeCylinder undo command. Take care to translate
the index into the source index, should cylinders be hidden!
Apart from the map-to-source call, this copies the weightsystem
code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The CylinderModel always accessed the global "displayed_dive" and in
some special cases also "current_dive". To implement cylinder undo,
the model should work on an arbitrary dive. Therefore, in analogy
to the weight model, make the dive dynamic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the dive list is cleared or updated, the entries in the
divesite-model become stale and therefore the divesite-model
(with the actual name LocationInformationModel) also must be
updated. This was done manually in some parts of the code and
forgotten in others. Therefore, do it directly in the clear()
and reset() function of the dive list-model.
This might be a bit of a layering violation: why should one
model call into another if they are not in parent/child
relationship? However, this seems easier than introducing
a global "reset dives" function that coordinates the models.
Moreover, it does not appear 100% safe: if the clearing of
the divesite model causes accesses to the divelist-model,
they happen in the midst of a model reset and we had horrible
bugs with that kind of things. However, I don't think that
should happen.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
There are two cases where dive-times are shifted: in an explicit
dialog and when editing the date/time of a dive.
In each of these cases, the selected dives were collected manually.
Instead use the getDiveSelection() function. Since this returns
a std::vector, change the argument of Command::ShiftTime() to
such a std::vector.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were used to remove warning-icons to mark tabs with user
changes. However these icons haven't been set since commit
a86aca0378.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to test whether the "really discard changes?"
message should be shown. However, we now edit weightsystems
directly with undo commands. Therefore, the check is unnecessary
and the whole function can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the show_unused_cylinders flag is not set, the cylinder tables
in the equipment tab and the planner should not show unused cylinders.
However, the code in CylindersModel is fundamentally broken if the
unused cylinders are not at the end of the list: The correct number
of cylinders is shown, but not the correct cylinders.
Therefore, add a higher-level CylindersModelFiltered model on top
of CylindersModel that does the actual filtering. Some calls are
routed through to the base model (notably those that take indexes,
as these have to be mapped), for some calls the caller has to get
access to the source model first. We might want to adjust this.
For filtering, reuse the already existing show_cylinder function
and export it via CylindersModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While technically the initial value of this variable makes no difference as
it is set when the first dive is displayed, technically Coverity is correct.
Fixes CID 353273
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were two cases that were handled incorrectly:
- if the user hasn't entered a salinity, obviously there shouldn't be a warning
- if this is a manually entered dive, there is no salinity downloaded from a
dive computer, so equally, no warning
Suggested-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to show this whenever the value in the dive (which could have been
entered by the user some other time) doesn't correspond to the value in the DC.
This, btw, will point out to the user if different DCs have different values.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were royally confused when we didn't know the salinity value (e.g., if the
dive computer didn't provide that information). We somehow treated this as the
same as wanting to use the salinity information in the dive computer. Which
makes no sense.
While cleaning this up, this also adds the textual representations of the water
types as a string list that corresponds to the enum values that we use - this
way it's easier to stay consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
