Windows had it's own direct socket implementation for rfcomm (ie legacy
BT), while all the other platforms used QtBluetooth.
This makes Windows do the same thing. Hopefully modern Qt libraries now
work well enough on the Windows platform for this to work, but I can't
test it.
We can make a test build that Windows people can try, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jef has changed the libdivecomputer iostream layer and extended it in
two different ways:
- iostram's now have a 'poll()' method, which does what the name
implies: waits for data to be available with a timeout.
- iostreams now have a 'ioctl()' method, which can be used to implement
miscellaneous operations. Right now the two ones that you can do are
"set latency" (this replaces the old 'set_latency()' method) and "get
BLE name" (this replaces our 'get_name()' method that was never part
of the upstream libdivecomputer interfaces)
Neither of these is all that complicated, and the transition is fairly
obvious.
HOWEVER.
I have absolutely no idea how to do 'poll()' on Windows sockets, and I
have no intention of figuring it out. We use a direct socket interface
to implement the (non-BLE) RFCOMM bluetooth serial protocol, and I'm not
sure why Windows is so special here. I suspect - but cannot test - that
we should just switch the Windows RFCOMM implementation over to the use
the same QtBluetooth code that we use on other platforms.
I assume that the Windows Bluetooth support was originally not
sufficiently good for that, but these days we depend on Qt doing BLE for
us even on Windows, so presumably FRCOMM works too.
That would be a nice cleanup, and would make 'poll()' work on RFCOMM
under Windows too. However, since I can't test it, I've not done that,
but instead just made the Windows RFCOMM 'poll()' method always return
success. That may or may not get the thing limping along.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A lot of whitespace issues have snuck in recently, this just cleans those up so
that I don't need to hand-edit patches every time I touch this file (since
QtCreator automatically fixes whitespace when I make changes).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply replace it with QLatin1String. There is a tiny performance penalty,
but none of that code would care.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update Settings to use ThemeNew (for theme change)
Reduce subsurfaceTheme in main
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Register themeInterface with a temporary name, which allows it to be integrated
in subsurfaceTheme (main.qml).
Once all of subsurfaceTheme (main.qml) is available in themeInterface, the name
will be changed.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently subsurfaceTheme resides in main.qml, where it does not naturally
belong.
Add C++ class that will replace subsurfaceTheme in main.qml in a 1-1 manner.
This opens future posibilities
- on top of the 3 themes, allow users to select colors/fonts
- add stylesheets to Template* components
- make day/night shift automatically.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I thought I had it fixed, but we still see a ridiculous number
of random, unexplained failures which distract from what we are
trying to do with the GitHub Actions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Provide text and 12 images to describe the preference system
for Subsurface. Several within-document links updated.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Replace 11 images in the user manual to reflect latest changes
in the UI (Notes tab, Equipment tab, Information tab).
Change text in user manual.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
In some case the scaling (real value <-> UI value) is different
for mobile and desktop. In order to make the difference understandable
comments are added to each function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove comment that was very false (next line contradicted the comment).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setBottomSac, setDecoSac and setFactor in diveplannermodel
receives display value which are then converted.
subsurface-mobile have slightly different values, move the
correction of these from plannershared to diveplannermodel, in
order to keep the whole convert in one place.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove Q_PROPERTY and signals from plannershared, since they are
no longer used (transferred to qmlinterface).
Unregister object plannershared, since it is no longer used in QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update size and colors.
Changing the TemplateSection, automatically changes all sections
in the system, converted to the new layout.
The styling would be better in a style/theme class, but
subsurfaceTheme is in main.qml and not in a C++ class, so for now
use primitive styling.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The standard SpinBox uses far too much real estate.
The new SpinBox have a smaller footprint, and more visual effect.
Changing the TemplateSpinBox, automatically changes all spinboxes
in the system, converted to the new layout.
The styling would be better in a style/theme class, but
subsurfaceTheme is in main.qml and not in a C++ class, so for now
use primitive styling.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add property pressureUnit to use as BAR/PSI text.
Added slot to catch when user changes BAR <-> PSI.
Add Backend variables to Planning section.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add surface_segment to plannerShared and then
update desktop-widgets.
Signed-off-by: jan Iversen <jan@casacondor.com>
desktop-widgets: use plannerShared for surface_segment
Change getter/setter for surface_segment to plannerShared, in
order to share the conversion with mobile diveplanner
Signed-off-by: jan Iversen <jan@casacondor.com>
Duplicate deco_mode to DECO_MODE, in order to make it available to QML.
Duplicate enum divemode_t to DIVE_MODE in order to make it
available to QML. Only part of the enum is made available.
Signed-off-by: jan Iversen <jan@casacondor.com>
Add bottompo2, decopo2 and bestmixend to QMLInterface
Bestmixend in gas options changing with
meter/feet
Signed-off-by: jan Iversen <jan@casacondor.com>
The real values are 1.0 to 10.0, but QML needs int so mobile
gets values 10.0 to 100.0
add sacfactor() to QMLInterface and update QML.
Signed-off-by: jan Iversen <jan@casacondor.com>
Move conversion cuft <-> liter from desktop-widget/diveplanner.cpp
to plannerShared, to facilitate the same results in mobile
diveplanner
Use Backend for bottomsac/decosac and update to check
for switch LITER <-> CUFT
Add bottomsac/decosac to QMLinterface.
Signed-off-by: jan Iversen <jan@casacondor.com>
Variables without conversion, do not need to pass plannerShared
(due to the QML interface).
Simple variables do not pass plannerShared, but diveplanner
in desktop-widgets and qmlinterface in mobile-widgets call the
implementation directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
This replaces the C-code XML parsing with a Qt infrastructure.
QXmlStreamReader is used to parse the GPX file.
It also takes into account comments by @neolit123
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Catch when volume type is changed and update bottomsac/decosac.
Also update text l/min <-> cuft/min and add a space between value and unit.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Drop_stone_mode, when set, affect the descent rate, so place it alongside the
descent rate.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add simple variables, where getter uses prefs. and setters call directly to set
function (without using plannerShared).
rename last_stop --> last_stop6m
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Length variables are updated from the QML and desktop directly.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make notes rates available to QML through the Backend interface.
Remove the corresponding variables from plannerShared.
Getters are from prefs. while setters are linked to diveplan model.
Remark: signals from qPrefDivePlanner is used, because the diveplanner model
sets qPrefDivePlanner but do not issue special signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add option "-src-dir <source directory>" to build options.
When calling build.sh without -src-dir it uses src/subsurface as usual, but when called
with -src-dir <source directory>, it uses src/<source directory> as source basis.
This is a needed option, when working with "git worktree", which is used when working on
different branches in parallel (e.g. master and my-feature-branch), because it allows a
build directory in each worktree, and thus much faster when switching work.
Signed-off-by: jan Iversen <jan@casacondor.com>
For METRIC and IMPERIAL, show the radiobuttons disabled
For PERSONALIZED, allow user to select individual units.
Signed-off-by: jan Iversen <jan@casacondor.com>
This shouldn't be part of the desktop UI code; there's still the issue that we
really shouldn't hand code XML parsing, but I'll leave that for later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows Subsurface to obtain the coordinates of a dive directly
from a GPS track. It parses a GPX file (GPX V1.0 or V1.1) from
a GPS to locate the trackpoint immediatedly after the start of a
dive. There is an additional "Use GPS file" button in the Edit Dive
Site panel that is selected from the Notes tab. Image:
This allows one to select a GPX file, bringing up the Import GPS
dialog.
There is extensive provision for cross-checking that the dive track
synchronises with the dive start and end. If the Save button in the
dialog is pressed the dive coordinates are copied into the Dive
Coordinates text box in the Edit Dive Site panel. The map moves
to indicate the location of the dive site.
The bulk of the work is done in importgps.cpp. The code is
pretty intergrated: I tried to break it up in smaller commits but that
was not feasible.
The code includes responses to the comments by @neolit123 and
@bstoeger. The C-based file input was replaced with Qt-based
code using QChar, QString and QFile.
[Dirk Hohndel: fixed several small issues in the .ui file, removed
various headers includes that weren't needed and
fixed printing of minutes as zero padded]
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ascent/Descent rate functions are fully implemented in diveplannermodel,
therefore remove these functions.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use Backend instead of Planner for ascent/descent variables.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make ascent/descent rates available to QML through the Backend interface.
Remark signals from qPrefDivePlanner is used because the diveplanner model
sets qPrefDivePlanner but does not issue its own signals.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change ascent/descent setter function names to set_<name>Display
to show the value is prepared for displaying (common for desktop and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The spinboxes are already connected to diveplannermodel set_ functions, remove
second connect to plannerShared.
Change get functions to use diveplannermodel.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
diveplannermodel already contains set_<asc/desc> function that convert from
screen value to real value; this adds get functions that convert real value to
screen value, so now all conversions are done in one place.
Use prefix Display to identify this is values prepared for the UI (both desktop
and QML).
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
