I'm going to try to update the remote if the local cache is more recent
when we fetch the data, which requires access to the remote over a wider
range of code. This re-organizes the code so that we can free the
remote later without having to have nasty error handling.
We avoid the whole "if an error happened, free the remote and return" by
creating helper functions and freeing the remote in the caller, so that
all paths end up freeing it naturally.
NOTE! We want to try to update the remote when we save the local cache
too, so this whole "update remote when opening it" is incomplete. But
(a) we do want to do it here as well
and
(b) this is the easiest place to create the initial "push to remote"
code without any new "sync with cloud" interfaces.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to fetch the remote information but not actually do anything
about it, except report when it wasn't up-to-date.
Now we actually update the local cached copy if the remote has changed.
The code does not try to actually merge things, so only fast-forward
updates are done, but that should be the normal case. We might
eventually do some simple merging on our own, but I suspect manual
merging may be the safer option.
We don't currently ever update the remote repository, and only inform
users that our local repository is ahead of the remote. Fixing that is
the next step.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this isn't what I really want (I wanted pictures of the dive site
instead of the profile), at least this makes it clear that we aren't
editing a dive but instead are looking at a site.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now happens in its own thread...
But leave the infrastructure so we can ask questions about the geo
encoding
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Two "locations" from a V2 file are the same site if they have the same
name AND if their GPS coordinates are within 20 meters of each other.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And use this to find a dive site within a certain radius of a GPS fix.
This will be used to figure out if dive sites might be the same.
This uses a new Qt5 component (Positioning) which was added in Qt5.2.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we should have far fewer dive computers than dives this straight
forward algorithm shouldn't cause any performance issues.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The algorithm seems rather brute force; basically quadratic in the number
of dives, assuming we have about the same number of dive sites as dives
which seems a reasonable assumotion.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When downloading GPS data from the Subsurface webservice we repopulated
the globe before purging all the unused GPS fixes from the list of dive
sites which caused massive clutter (until the next time the user changed
the displayed dive or did anything else that caused the globe to redraw
itself).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we use the email address (including the '@' sign) as the repository
name we have to be more careful when trying to pick an account name from a
git URL.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After we import all the GPS fixes from the Subsurfae webservice we delete
the ones that didn't match any dives. The algorithm skipped every other
one by mistake.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Subsurface Webservice (as backend for the companion app) will usually
send a lot of gps fixes encoded as dives, all with the same dive site
name. When parsing the XML file it sends we need to make the dive site
names unique so that we can then match them to the existing dives.
The fake dives with all the dives sites will all be discarded, but without
creating the unique dive sites we can't successfully add the GPS
coordinates to the existing dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can't build with -DNO_MARBLE after some previous commit broke
globe.cpp
- centerOnCurrentDive() is still existing in the code while removed from
header in 6b81fb49d0.
- Some referenced to MainWindow::instance()->globe() even if we are
building with no marble.
- include stdint.h
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This triggers when the email address / password is changed in the
preferences. It opens an https connection with the backend server (the URL
is hardcoded) which should create an account with these credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we added two dives, and then tried to edit
the first added one, the current 'added dive'
set on main_tab would be the second one, so when
we got to the accept() part of the call, it would
reselect the last added_dive that we had.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The name of the dive site on the globe wasn't being
updated when we changed the name of it in the dive
management dialog.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were ignoring the displayed_dive_site
as we were adding it and the changes weren't
accepted yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We always thought that a dive had a dive site
and that a dive really exists. but if we go
to add dive and then go to add dive site,
none of those exist yet and then we got a crash.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the current_dive was the same as the dive send to
the LocationInformation widget, we would do nothing,
wich is wrong because we could have filled the information
on an add_dive_site action and then cancelled it, so the
info will stay there until we change it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were relying in the current_dive to display the
globe coordinates correctly - but this is not always
the case: you can be inserting a new dive site and it
isn't yet inside of the dive until the user presses
accept. So always pass the uuid of the dive site that
we want to display.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this I can now successfully run this on Mac and Arch Linux, both running
"fresh" and running in an existing build directory (i.e., getting the updates
right).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The script didn't do the right thing if it had been run before and was
re-run to create the latest build. We need to actually pull the latest
versions of the different git repositories and make sure that the branches
and commits that we want exist.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The progress bar shows the progress of both the rendering part and the
templating part, unfortunately we can't check the progress of Grantlee
templating engine so the progess bar doesn't have a constant pace it
stops a little around 20%.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the main function that prints dive lists.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move print_options struct to printoptions.h, its more relevant to be
placed here.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code can be removed as we don't need QT printing code anymore.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove obsolete code and add new customizable print code to the options
dialog.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't need any further calls to printLayout as it will be replaced by
Printer class that handles the new custom printing capability.
Also fix one coding style issue.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If NO_PRINTING is not set, subsurface will require grantlee during
building. As Grantlee will be a hard dependency for Subsurface, so no
Grantlee means no printing.
[Dirk Hohndel: switched default for NO_PRINTING to ON]
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Render Html pages into a QWebView then print it using QPainter. the
Printer::print() is called that prepare the HTML file to be rendered by
the QWebView.
Printer::render() will do the rendering task.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the main class to hold Grantlee engine logic.
TemplateLayout::generate() loads QT5Grantlee and initialize the
templates then returns a QString that contains the rendered HTML by
Grantlee library.
Also this class contains the Dive class which holds the logic that
formats the data before passing it to the templates.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just a HTML/CSS template file which will be used
as the basis for initial Grantlee development.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
