This has become a bit of a catch-all overhaul of a large portion of the
planner - I started out wanting to improve the CCR mode, but then as I
started pulling all the other threads that needed addressing started to
come with it.
Improve how the gas selection is handled when planning dives in CCR
mode, by making the type (OC / CCR) of segments dependent on the gas use
type that was set for the selected gas.
Add a preference to allow the user to chose to use OC gases as diluent,
in a similar fashion to the original implementation.
Hide gases that cannot be used in the currently selected dive mode in
all drop downs.
Include usage type in gas names if this is needed.
Hide columns and disable elements in the 'Dive planner points' table if
they can they can not be edited in the curently selected dive mode.
Visually identify gases and usage types that are not appropriate for the
currently selected dive mode.
Move the 'Dive mode' selection to the top of the planner view, to
accommodate the fact that this is a property of the dive and not a
planner setting.
Show a warning instead of the dive plan if the plan contains gases that
are not usable in the selected dive mode.
Fix the data entry for the setpoint in the 'Dive planner points' table.
Fix problems with enabling / disabling planner settings when switching
between dive modes.
Refactor some names to make them more appropriate for their current
usage.
One point that is still open is to hide gas usage graphs in the planner
profile if the gas isn't used for OC, as there is no way to meaningfully
interpolate such usage.
Signed-off-by: Michael Keller <github@ike.ch>
The copy/pasting of dive-sites was fundamentally broken in at least two
ways:
1) The dive-site pointer in struct dive was simply overwritten, which
breaks internal consistency. Also, no dive-site changed signals where
sent.
2) The copied dive-site was stored as a pointer in a struct dive. Thus,
the user could copy a dive, then delete the dive-site and paste.
This would lead to a dangling pointer and ultimately crash the
application.
Fix this by storing the UUID of the dive-site, not a pointer.
To do that, don't store a copy of the dive, but collect all
the data in a `dive_paste_data` structure.
If the dive site has been deleted on paste, do nothing.
Send the appropriate signals on pasting.
The mobile version had an additional bug: It kept a pointer to the
dive to be copied, which might become stale by undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Feels natural in a C++ code base.
This removes a nullptr-check so some care has to be taken.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This accesses the global dive_table, so make this explicit.
Since force_fixup_dive() and default_dive() use fixup_dive(),
also move them to struct dive_table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Before, a non-owning pointer was passed and the dive moved
away from the dive. Instead, let the caller decide if they
still want to keep a copy of the dive, or give up ownership:
In MainWindow and QMLManager new dives are generated, so
one might just as well give up ownership. In contrast,
the planner works on a copy (originally the infamous
"displayed_dive") and now moves the data manually.
This commit also removes duplicate code, by moving the
"create default dive" code from MainWindow and QMLManager
to struct dive.
Finally, determination of the "time zone offset" is not done
in POSIX, since we want to avoid calls form the core into
Qt.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions accessed the global divelog make this explicit.
I'm still not happy about the situation, because these functions
access global state, such as the selection. I think these
should be moved up the call-chain.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a messy commit, because the "qPref" system relies
heavily on QString, which means lots of conversions between
the two worlds. Ultimately, I plan to base the preferences
system on std::string and only convert to QString when
pushing through Qt's property system or when writing into
Qt's settings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Having this as a pointer is an artifact from the C/C++ split.
The divesitetable header is small enough so that we can
include it directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a humongous commit, because it touches all parts of the
code. It removes the last user of our horrible TABLE macros, which
simulate std::vector<> in a very clumsy way.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since struct divecomputer is now fully C++ (i.e. cleans up
after itself), we can simply turn the list of divecomputers
into an std::vector<>. This makes the code quite a bit simpler,
because the first divecomputer was actually a subobject.
Yes, this makes the common case of a single divecomputer a
little bit less efficient, but it really shouldn't matter.
If it does, we can still write a special std::vector<>-
like container that keeps the first element inline.
This change makes pointers-to-divecomputers not stable.
So always access the divecomputer via its index. As
far as I can tell, most of the code already does this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This allows us to use non-C member variables. Convert a number
of pointers to unique_ptr<>s.
Code in uemis-downloader.cpp had to be refactored, because
it mixed owning and non-owning pointers. Mad.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a long commit, because it introduces a new abstraction:
a general std::vector<> of std::unique_ptrs<>.
Moreover, it replaces a number of pointers by C++ references,
when the callee does not suppoert null objects.
This simplifies memory management and makes ownership more
explicit. It is a proof-of-concept and a test-bed for
the other core data structrures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To my understanding, declaring empty parameter lists using "(void)"
is an artifact from the bad old K&R times, when functions were
declared without(!) parameters. Which in hindsight was an absolute
recipe for disaster. So for backwards compatibility, functions
without parameters had to be declared using "(void)" as "()"
could also mean "any function".
That was 40 years ago. Meanwhile, C++ introduced references,
which made it a necessity to declare the function parameters.
So "(void)" is redundant and inconsistent in C++ code and
just makes no sense.
Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this is now in C++, we don't have to use our crazy
TABLE_* macros.
This contains a logic change: the dives associated to a
dive site are now unsorted.
The old code was subtly buggy: dives were added in a sorted
manner, but when the dive was edited the list was not
resorted. Very unlikely that this leads to a serious
problem, still not good.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
- show the correct gasmix in the profile;
- make gases available for gas switches in the profile after they have
been added;
- persist gas changes;
- add air as a default gas when adding a dive.
This still has problems when undoing a gas switch - instead of
completely removing the gas switch it is just moved to the next point in the
profile.
Signed-off-by: Michael Keller <github@ike.ch>
- standardise the naming;
- use it consistently;
- apply the 'samples < 50' only when putting manually added dives into
edit mode - everywhere else manually added dives should be treated as
such;
- do not show a warning before editing a manually added dive in planner.
Signed-off-by: Michael Keller <github@ike.ch>
Improve the warning shown to the user when closing the application wile
in the planner. We now allow the user to directly discard the planned
dive, save it into the dive log, or cancel the operation altogether.
If they save into the dive log, or if they modified the dive log before
starting the planner, a second warning about the unsaved dive log
changes will be shown.
Signed-off-by: Michael Keller <mikeller@042.ch>
Currently editing of planned dives that have been merged with actual
(logged) dives only works if the 'Planned dive' divecomputer is the
first divecomputer, and this divecomputer is selected when clicking
'Edit planned dive'. In other cases the profile of the first
divecomputer is overlaid with the profile of the planned dive, and the
first divecomputer's profile is overwritten when saving the dive plan.
Fix this problem.
Triggered by @SeppoTakalo's comment (https://github.com/subsurface/subsurface/issues/1913#issuecomment-2075562119): Users don't like that planned dives show up as their own entries in the dive list, so being able to merge them with the actual dive after it has been executed is a good feature - but this wasn't working well until now.
Signed-off-by: Michael Keller <github@ike.ch>
The only case left is in android.cpp, though that is only compiled
when compiling the full desktop app on Android. I.e. never. So
don't bother for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Let's use std::string in the core. Notably, I'd like to make
the numerous main() functions mostly independent of Qt. Some
things will have to remain, such as argument parsing, of course.
This changes the API: instead of returning an error code and
taking a pointer to the actual return-value, return an
std::optional<std::string>> that is set if the function succeeds.
Returning an empty string in the error case might be simpler,
but oh well...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a crash condition when opening the cloud from
desktop: The old code passed a NULL pointer that was then
assigned to an std::string, which is not supported.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Q_FOREACH and foreach are anachronisms.
Range based for may cause a performance regression: it can
lead to a copy of shared containers (one reason why Qt's
COW containers are broken). However, as long as there is no
user noticeable delay, there is no point in analyzing each case.
And also no point in slapping an 'asConst' on every container
that is looped over.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
printf() is a horrible interface as it does no type checking.
Let's at least use the compiler to check format strings and
arguments. This obviously doesn't work for translated strings
and using report_error on translated strings is dubious. But OK.
Had to convert a number of report_error() calls to supress
warnings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Mostly irrelevant std::move() stuff of copy-on-write Qt objects,
a few real bugs, a timestamp_t downconversion and some codingsyle
adaptation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unfortunately Coverity doesn't understand that most Qt data
structures are copy-on-write. It's a mis-feature of Qt, but
it is the way it is. Thus, passing by value is not an issue.
Out of ca. 25 warnings only two were legit. Let's silence
the others by either std::move()ing or passing by reference,
as would be idiomatic C++, which Qt is not.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This does two independent things:
It sets the planner state early enough so the appropriate
default profile for the planner is created (without
safety stop).
Upon cancelling the planner, it resets the profile widget
to profile more (rather than planner) as otherwise upon
the next change into the planner the planner model is
not properly initialized.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Fix a bug introduced in 8cd451fc33 causing
an error to be thrown every time trying to do 'Save to cloud storage'.
Signed-off-by: Michael Keller <github@ike.ch>
To phase out this global variable, avoid access of displayed_dive
in the printing code. This is used when printing a plan. Instead,
when in plan-mode, pass the planned dive to the printing code
as a single dive to be printed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The current dc global makes no sense on mobile. Therefore,
move the logic of the currently displayed dive computer
to the profile widget and remove the dc_number global
variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't access the global current_dc, but pass it to the sensor and
tank-use delegates, when the current dive or dive computer changes.
The same pattern is already realized for the tank and weight models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On selection change, pass down selection (including current
dive and dc) to the tab widgets. Ultimately, this should
remove access to global variables. A number of new accesses
are marked as TODO. They shall be removed in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was very weird: a setSelection() call was always followed
by a selectionChanged() call, though sometimes in convoluted
ways. Notably, the formed was called by the DiveListView, the
lattern then by the MainWindow.
Let's just merge these two functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This tries to encapsulate the management of the current dive and
divecomputer in the selection code. The current dive is alreay
set by setSelection(). Add a new parameter to also set the
current divecomputer. If -1 is passed, then the current
computer number is remained. This will allow us to audit the code.
Because for now, the whole "current dive computer" thing seems
to be ill-defined.
This fixes a bug: the dive-computer number wasn't validated
when making a new dive the current dive. The new code has some
drawbacks though: when selecting a whole trip, the validation
will be called for all dives in the trip and thus the dive computer
number will depend on the dive with the lowest amount of dive
computers in the trip. This will need to be fixed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
