displayed_dive used to contain the currently displayed (as in
shown on the profile) dive. However, now it is only a "scratch"
dive used by the planner and initialized every time the planner
is started. There is no point in clearing this dive when clearing
the dive data. In fact, the dive should probably be cleared when
the planner finishes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
delete_single_dive() is one of those remnants from before the
undo-code. Now it is only called in two contexts:
1) When clearing the whole dive log.
2) When importing dives from the cloud on mobile.
In the first case, the selection is cleared before deleting
the dives.
In the second case, let's just do the same.
Thus, we can remove the last call to the deselect_dive()
function that does some complex calculations concerning
the current dive and divecomputer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser API was very annoying, as a number of tables
to-be-filled were passed in as pointers. The goal of this
commit is to collect all these tables in a single struct.
This should make it (more or less) clear what is actually
written into the divelog files.
Moreover, it should now be rather easy to search for
instances, where the global logfile is accessed (and it
turns out that there are many!).
The divelog struct does not contain the tables as substructs,
but only collects pointers. The idea is that the "divelog.h"
file can be included without all the other files describing
the numerous tables.
To make it easier to use from C++ parts of the code, the
struct implements a constructor and a destructor. Sadly,
we can't use smart pointers, since the pointers are accessed
from C code. Therfore the constructor and destructor are
quite complex.
The whole commit is large, but was mostly an automatic
conversion.
One oddity of note: the divelog structure also contains
the "autogroup" flag, since that is saved in the divelog.
This actually fixes a bug: Before, when importing dives
from a different log, the autogroup flag was overwritten.
This was probably not intended and does not happen anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the only caller was C++ code, this can be done in
C++ code, which removes memory-management headaches.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The eventname handling code was splattered all over the place.
Collect it in a single source file and use C++ idioms to avoid
nasty memory management. Provide a C-only interface, however.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
CCRs are different. It does not make sense to compute
a depth dependent SAC. You could compute the rate of O2
consumption but even that is likely wrong (as O2 in the
diluent would enter that as well), so simply don't attempt
it.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For dives with mixed divemode, one needs to check sample.setpoint
to figure out if the segment is an OC segment and the po2 needs
to be computed from the gasmix and ambient pressure.
This fixes#3310
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We have this odd legacy notion of a divecomputer 'device', that was
originally just basically the libdivecomputer 'EVENT_DEVINFO' report
that was associated with each dive. So it had firmware version,
deviceid, and serial number.
It had also gotten extended to do 'nickname' handling, and it was all
confusing, ugly and bad. It was particularly bad because it wasn't
actually a 'per device' thing at all: due to the firmware field, a dive
computer that got a firmware update forced a new 'device'.
To make matters worse, the 'deviceid' was also almost random, because
we've calculated it a couple of different ways, and libdivecomputer
itself has changed how the legacy 32-bit 'serial number' is expressed.
Finally, because of all these issues, we didn't even try to make the
thing unique, so it really ended up being a random snapshot of the state
of the dive computer at the time of a dive, and sometimes we'd pick one,
and sometimes another, since they weren't really well-defined.
So get rid of all this confusion.
The new rules:
- the actual random dive computer state at the time of a dive is kept
in the dive data. So if you want to know the firmware version, it
should be in the 'extra data'
- the only serial number that matters is the string one in the extra
data, because that's the one that actually matches what the dive
computer reports, and isn't some random 32-bit integer with ambiguous
formatting.
- the 'device id' - the thing we match with (together with the model
name, eg "Suunto EON Steel") is purely a hash of the real serial
number.
The device ID that libdivecomputer reports in EVENT_DEVINFO is
ignored, as is the device ID we've saved in the XML or git files. If
we have a serial number, the device ID will be uniquely associated
with that serial number, and if we don't have one, the device ID will
be zero (for 'match anything').
So now 'deviceid' is literally just a shorthand for the serial number
string, and the two are joined at the hip.
- the 'device' managament is _only_ used to track devices that have
serial numbers _and_ nicknames. So no more different device
structures just because one had a nickname and the other didn't etc.
Without a serial number, the device is 'anonymous' and fundamentally
cannot be distinguished from other devices of the same model, so a
nickname is meaningless. And without a nickname, there is no point in
creating a device data structure, since all the data is in the dive
itself and the device structure wouldn't add any value..
These rules mean that we no longer have ambiguous 'device' structures,
and we can never have duplicates that can confuse us.
This does mean that you can't give a nickname to a device that cannot be
uniquely identified with a serial number, but those are happily fairly
rare (and mostly older ones). Dirk said he'd look at what it takes to
give more dive computers proper serial numbers, and I already did it for
the Garmin Descent family yesterday.
(Honesty in advertizing: right now you can't add a nickname to a dive
computer that doesn't already have one, because such a dive computer
will not have a device structure. But that's a UI issue, and I'll sort
that out separately)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The dive selection was initialized during data-reset. However,
this emitted a signal before all data-reset routines were run.
Ultimately, this led to access-after-free in the statistics code.
Instead, move the select_newest_visible_dive() signal from the
divelist-model to the process_loaded_dives() function. There
is no point in initializing the selection if the dive data
is cleared after all.
This change broke closing of the log, because the UI-selection
was not reset. Therefore, when clearing the data, clear the
selection before proceeding with clearing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Both the calculations for CNS and OTU did not take
into account the pO2 drop when using a PSCR. Furthermore,
there was some unit confusion due to not using internal
units.
Reported-by: arosl
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When doing OC bailout from a CCR dive, there could still
be pO2 sensor readings but those are not valid.
This fixes a problem noticed by Justin Ashworth.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Even when diving a CCR, the pO2 cannot exceed ambient
pressure. This only makes a difference at shallow depths.
Fix this in the calculation of OTUs and CNS.
This affects some tests that now have slightly different CNS and OTU values.
Suggested-by: Justin Ashworth
Signed-off-by: Robert C. Helling <helling@atdotde.de>
To remove reliance on global state, pass an "in_planner" argument
to decoMode(). Thus, calls to in_planner() can be removed.
This is a more-or-less automated change. Ultimately it would
probably be better to pass the current deco-mode to the affected
functions instead of calling decoMode() with an in_planner
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to clear_deco(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to add_segment(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function initializes decompression data from a dive.
The dive is not modified, therefore make it const.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Arguably, the number of filtered dives is a matter of the divefilter.
Let's move it there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The shown_dives variable was reset by the dive_list code. Arguably,
the filter should keep track of the number of shown dives, so move
the resetting there. This means adding a new "reset()" member function
to the filter and call that instead of "updateAll()" when the core
data is reset.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The list of known tank types were kept in a fixed size table.
Instead, use a dynamic table with our horrendous table macros.
This is more flexible and sensible.
While doing this, clean up the TankInfoModel, which was leaking
memory.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When dives were merged on import, they were not unregistered
from their dive site and trip before being deleted. Thus, these
tables had stale pointers, which would ultimate lead to crashes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since dive.c is so huge, split out divecomputer-related functions
into divecomputer.[c|h], sample.[c|h] and extradata.[c|h].
This does not give huge compile time improvements, since
struct dive contains a struct divecomputer and therefore
dive.h has to include divecomputer.h. However, it make things
distinctly more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In an effort to reduce the size of dive.h and dive.c, break out
the event related functions. Moreover event-names were handled
by the profile-code, collect that also in the new source files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Desktop does not use mark_divelist_changed() anymore - all is done
via the undo machinery. Therefore move this function (and its
counterpart unsaved_changes()) to qmlmanager.cpp.
Ultimately, it probably should be removed from there as well, but
currently I don't dare to touch all the cloud-logic!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function was misnamed in that it doesn't set the nickname
of a device. Instead, it adds all (unknown) devices of a
dive to the/a device-table. Let's call it appropriately.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a device_table parameters to Command::importTable() and
add_imported_dives(). The content of this table will be added
to the global device list (respectively removed on undo).
This is currently a no-op, as the parser doesn't yet fill
out the device table, but adds devices directly to the global
device table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the global device table directly, add a parameter
to all device-table accessing functions. This makes all places in
the code that access the global device table grep-able, which is
necessary to include the device-table code in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a rudimentary list of filter presets to the core. The list
is sorted by name. Access is provided via a C interface so that
the presets can be written to the git and XML logs. Internally,
the list is realized by a C++ vector for convenience (euphemism for
laziness).
Morover, a C++ interface is provided for the UI. Currently names of
the presets cannot be edited, since this would mean that the order
of the list changes. This may be implemented later if required.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
0249e12 split up the dive import logic in multiple steps. Thereby,
the one of the conditions for renumbering the imported dives (is
the last old dive numbered) got messed up: The first number of the
new dive was compared to the total number of old dives, which makes
no sense.
- Simply check for the number of the last existing dive (if any).
- Don't remember the number of old dives - the original table is
not modified anyway.
Fixes#2731
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To reset the core data structures, the mobile and desktop UIs
were calling into the dive-list models, which then reset the
core data structures, themselves and the unrelated
locationinformation model. The UI code then reset various other
things, such as the TankInformation model or the map. . This was
unsatisfying from a control-flow perspective, as the models should
display the core data, not act on it. Moreover, this meant lots
of intricate intermodule-dependencies.
Thus, straighten up the control flow: give the C core the
possibility to send a "all data reset" event. And do that
in those functions that reset the core data structures.
Let each module react to this event by itself. This removes
inter-module dependencies. For example, the MainWindow now
doesn't have to reset the TankInfoModel or the MapWidget.
Then, to reset the core data structures, let the UI code
simply directly call the respective core functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView would touch the selection-innards directly.
Let's encapsulate that. Moreover, take care to reset the trip
selection when resetting the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move this to the core so that desktop and mobile don't have
to call this explicitly. Matter of fact, mobile didn't call
this. It is unclear, whether that was even used on mobile,
though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to keep the device nodes if all the other data
is cleared. Let's do this automatically and not explicitly.
This ensures that the function is also called on mobile.
Currently it was only called on desktop.
Weirdly, the parser-tests were expecting that the device nodes
were not reset by clear_dive_file_data() and therefore divecomputers
were accumulating in the test results. Thus, the additional
computers had to be removed from the expected test results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a crash: when the undo commands removed a dive from
the list, the fulltext cache was not cleared. If now the divelist
is reset and then the undo-command deleted, deletion of the owned
dive tries to remove it's fulltext cache, which doesn't exist
anymore.
For reasons of symmetry, when readding the dive, its fulltext
has to be registered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The compiler complained about this and it seems the
function does not need it.
Additional-test-suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This function was named improperly: it was only used on freshly
loaded data. Indeed, attempts to use it to actually reload lead
to crashes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adding dives uses the number of the last dive to create a new
dive number. Ignore invalid dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When loading dive data, populate the fulltext index. When clearing
dive data, free the fulltext index. When deleting a dive, remove it
from the fulltext index.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
