Owing to bit-rot, the extradata tab was not disabled if no dive
is selected. The reason was that there was an additional tab
(dive-computers) that should not be disabled. However that
tab was removed and now the extradata tab was not disabled.
Fix this, but note that there is another of these 'parasitic'
tabs, that should be removed, namely the dive-site tab.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This file was so confusing: A tabwidget containing a layout
containing a tabwidget. This strange situation is probably
due to moving the multi-dive warning message.
Remove the file, there seems to be nothing of importance
in there. All the UI was moved to the individual tabs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was always this weird asymmetry that the "maintab" widget
is one of the tabs itself, whereas the additional tabs were
treated as extra-widgets. Turn the first tab into explicit
source files to make the distinction between container and
content clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the user undos/redos the profile should update even
when in edit mode. This is a bit more complicated than
anticipated:
1) We should not do the update when emitting an undo command
from the profile. But we *should* update if it is an undo
command from the maintab (change depth/time).
2) The divepointsplannermodel has to be reset. Side note:
the code is truly abysmal as it sends numerous changed-signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Place undo commands for every change of the profile, not
only on "saving". Move the edit-mode from the mainwindow
and the maintab to the profile widget.
This is still very rough. For example, the only way to exit
the edit mode is changing the current dive.
The undo-commands are placed by the desktop-profile widget.
We might think about moving that down to the profile-view so
that this will be useable on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two actions were using the same command with a flag
controlling the name of the command, which is shown in
the undo menu.
However, the replanDive does much more (such as changing
the notes) and in the future we may want to be more
fine-grained with respect to profile editing. Therefore,
split these commands into two separate ones.
Moreover, make the editProfile command more flexible.
Pass an enum describing the action instead and also
a counter indicating how many points have been
moved or removed.
Finally, don't consume the input dive in the editProfile
command, because we will want to keep the original dive
while editing the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
User report: when switching focus between windows, the
cursor position gets lost. This is due to a note-edit
command being fired, which then overwrites the notes tab.
To prevent this, don't update the notes field when placing
a command. Moreover, generally don't update the dive
selection when placing a command as that also rewrites all
the values.
Should this be extended to other fields?
Fixes#3365
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TabDiveComputer model won't work in the new world order, where you
can't even insert a new device entry without a nickname to be edited.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MainTab::updateDiveInfo() is not executed when in the planner.
To decide whether the application is in the planner state,
it queried the profile. Instead, query the DivePlannerPointsModel.
Currently, there is no autoritative carrier of that flag.
However, the MainTab has a dependency on DivePlannerPointsModel
anyway, and therefore this removes a dependency on the
profile. This brings us closer to a state where we can have
multiple profiles.
Ultimately, it is hoped that the whole check can be removed
at this place, making the point moot.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The accept / reject message is only shown in edit-mode, no
need to check it. This is a step in simplification / removal
of the edit mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far the profile operated on the global displayed_dive. Instead,
take the dive to be displayed as a parameter to the plotDive()
functions.
This is necessary if we want to have multiple concurrent
profile objects. Think for example for printing or for mobile
where multiple dive objects are active at the same time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The MainWindow has a function to replot the profile. Use that
instead of accessing the profile directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We now have three different things that are kinda like statistics:
- the summary tab (reasonably useful when looking at selected dives)
- the yearly statistics (Ctrl/CMD-Y)
- the full statistics (Ctrl/CMD-T)
I'd argue that's at least one too many. But I'm sure some people will disagree.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So far, the PreferencesDialog emitted a settingsChanged signal.
This meant that models that listened to that signal had to
conditionally compile out the code for mobile or the connection
had to be made in MainWindow.
Instead, introduce a global signal that does this and move
the connects to the listeners to remove inter-dependencies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This used to reload the completion models. Moreover, remove two
obsolete member-function declarations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of programatically reload the completion models, listen
to the relevant signals in the models. To that goal, derive all
the models from a base class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the main-tab, when changing tag, buddy or divemaster,
update the corresponding completion model.
This is a quick-fix and the wrong thing to do. It works only
if the currently shown dive is changed, which is not a given.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Because of subsequent changes there is no clean way to just revert the changes
introduced in commit 8b36cf1051 ("desktop: offer different colors for info tab
titles"), so this manually removes the parts we don't need anymore.
This also restores a tooltip value that was inadvertantly removed in that
commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The preference setting seemed far too strange to do this. And not very user
friendly. So instead we figure out if this is a dark theme or not by looking at
text and background colors in the palette, and make sure we get notified if
that changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of doing it just for the Information tab, do it for all of the tabs.
There's still room for improvement. But this certainly feels more consistent.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding a new virtual function to all of these classes may seem like overkill,
but of course the idea is that likely we'd allow similar changes to all of
them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we want to include dive computer names in the undo system,
there should be visual feedback on undo/redo.
This would mean opening the divecomputer dialog, which would
appear quite strange. Therefore, add a tab. This is not ideal,
but consistent with the dive site tab, which probably shouldn't
be there either. In the future, the UI needs some rethinking.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to the timestamp -> QDateTime conversion, create a
common function.
1) For symmetry with the opposite conversion.
2) To remove numerous inconsistencies.
3) To remove use of the deprecated QDateTime::toTime_t() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move this function from maintab.cpp to qthelper.cpp. Since the
functionality was used in numerous places, use the helper function
there as well. This removes a number of inconsistencies. For example,
sometime setTimeSpec(Qt::UTC) was called, even though the
QDateTime object was already created with that time spec.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was more painful than expected, because we get the "preferences"
changed signal too early when the user switches to system format.
The correct format is set by the preferences-widget, not the preferences
subsystem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The tags of the dive site were shown/hidden when changing the
current dive.
Thus the following could happen:
1) User changes to dive with no tags. Tags are hidden.
2) User add image, which creates GPS tag
3) Tag is updated but not shown.
Fix this by showing/hiding tags when they are calculated not
when switching the dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is completely irrelevant, however out of principle,
let's free the tab-widgets at the end of the application.
To do so, use Qt's object hierarchy. I'm not a fan of this
kind of memory management, but it is how it is.
Moreover, remove the explicit constructor of MainTab, since
it doesn't differ from the default constructor anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clearing displayed_dive here makes no sense for two reasons:
1) This is only called on startup, when displayed_dive is not
yet initialized.
2) The tab-widgets don't use displayed_dive anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If current_dive was not set, the code would clear the tabs
right after updating the data. We might just as well set the
data only if current_dive is set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The date and time fields of the main tab posted undo events
for every date/timeChanged signal. Thus, when changing the
day of the month to e.g. 21, this would result in two date
change events: one to the 2nd and one to the 21st. This is
very irritating.
Instead listen to editingFinished() events, which thankfully
exist for these widgets.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView had a singleSelectedTrip function that
returns the selected trip if exactly one trip is selected.
This could be very slow if numerous non-trip items were
selected, because all the selection indices were back-
translated by the proxy model.
This could make selection changes very slow, because the
MainTab used said function to determine whether it should
show trip or dive data.. Indeed, with a 3500 dive test log,
when selecting all dives in tree mode, the updating of the
TabWidgets is sped up from 130 ms to 5 ms this commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a mix of ProfileWidget2::replot() and
ProfileWidget2::plotDive(current_dive, true), which is equivalent.
Since there was more of the latter and it is more flexible, unify on
that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In 2021035cfc a bug was introduced:
currentTrip of MainTab was not set in trip mode. Thus, when editing
the trip notes, the notes of all selected dives were edited instead.
Set the member variable and not a local variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To check wether the tab widgets should show the trip view, they called
the selectedTrips() function. The trip view was shown if that contained
only one trip. However, the selectedTrips() function was very slow,
because it has to query to core models.
Change the function to singleSelectedTrip(), which returns a trip
if there is exactly one trip selected. The function returns early
if there is more than one trip selected. This makes the select-all
case much faster.
There are two cases which are still very slow:
- List mode, because here all top-level items are queried.
- Dive log with many only top-level items.
Ultimately, we will have to cache the trip selection because
querying the model is too slow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was only one editMode left (MANUALLY_ADDED_DIVE).
Therefore replace by a flag. This makes the code more consistent,
because the conditions "editMode != NONE" and "editMode ==
MANUALLY_ADDED_DIVE) actually meant the same thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editMode was set to IGNORE_MODE when programatically setting
fields so that we can ignore changed-signals.
That seems to be orthogonal to whether we are in edit mode
and indeed when setting IGNORE_MODE the edit mode was
saved and restored.
Therefore, replace the IGNORE_MODE by an independent ignoreInput
flag.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All remaining callers were passing MANUALLY_ADDED_DIVE as a new
mode, so we may just as well remove the parameter and thus
simplify the logic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only way to enter edit mode is to edit the profile. However,
that means that the profile is already visible, so there is no
need to change the mode. Simply remove the EDIT mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The edit state is now only used to edit the profile. There is no
reason to disable random tabs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The editing of the dive site is controlled via an undo command.
No point in centering the map when cancelling a profile-edit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This stored the old editMode. However, it was not read after
editMode was changed, so there is no point to it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The "dive is currently" edited is only shown when the profile is
edited. This affects only the current dive and therefore a
message saying that multiple dives are edited makes no sense.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When enableEdition() was called with mode == NONE and the dive
was a manually added dive, it would call into MainWindow::
editCurrentDive(), which would in turn call enableEdition(),
however with another mode. Since the only caller of
enableEdition() is now editCurrentDive() anyway, we can
remove that weird code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
