Commit graph

16 commits

Author SHA1 Message Date
Martin Long
7367ccfb09 Fix gasdefinitons in UDDF export
Selection of <cylinder> elements wasn't working where dives are
part of a trip. Change the selection so that it will select all
cylinders whether or not the dive is part of a trip.

Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-12-10 08:14:44 -07:00
Martin Long
24ac35e107 Prevent UserID from being 'stuffed' into the start of UDDF export.
Due to there being no xsl template for the userID, it ended up getting
inserted at the start of the output. This adds an empty template to
map the <settings> element, preventing this erronious insertion.

Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-12-10 08:14:34 -07:00
Martin Long
aa74cd8802 Update dive site structure in UDDF export to match UDDF 3.2.0 specification.
The dive site structure in the UDDF export was using an old structure
where each site is simply listed as a <dive_site>.

The new structure requires a single <divesite> containing at least one
<divebase> - a base location where you are diving from, and at least one
<site>.

As subsurface only tracks sites, I've created a single divebase to be
referenced by all of the sites.

Note: although profiles in Subsurface can be grouped into trips, these
are groupings of profiles, not sites, and the mapping may not be
simple. e.g. on different trips the sames sites may be visited but a
different base used. Or, different bases may be used on a single trip.

Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-12-10 08:14:22 -07:00
Martin Long
b462a8da35 Separate out buddies into individual entities when exporting to UDDF.
Part of a series bringing UDDF export closer to the UDDF standard, as
per www.uddf.org.

Currently when exporting to UDDF buddy entities are created
one-per-unique-combination. This means that a group of buddies on a dive
are exported as a single buddy, with the names comma separated.

This patch identifies all unique buddies, whether used independently or
along with other buddies on a dive. They are then linked independently
on each profile.

It also uses the UDDF standard <link ref=""> instead of
<buddy_ref ref="">

Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-12-10 08:13:54 -07:00
Dirk Hohndel
1723c01603 Replace other references to hohndel.org
The only place where I'm not sure if there are unintended sideeffects of
changing over to the new domain is QCoreApplication::setOrganizationDomain

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-11-18 13:13:39 +00:00
Miika Turkia
964401c374 Add image support to UDDF export
This patch adds image support to UDDF export. As far as I can tell from
the UDDF specification, the images can only be added to notes field, so
that is what we do here. (buddy and owner can also have image tags, but
that is irrelevant for Subsurface currently.)

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-07-11 12:07:43 -07:00
Miika Turkia
088017f67c Optimize UDDF export
Writing the samples/waypoints to UDDF export in a totally new way.
Previously the preparations for approximating waypoints was done for
every sample, now only for the events.

A few days ago it took 36 seconds for my test set of 8 dives to export
to UDDF.  This optimization round took it down from 0m4.745s to
0m0.253s.

Fixes #508

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-05-02 22:25:59 -07:00
Miika Turkia
4aa7b01059 Properly identify siblings on UDDF export
UDDF export used all samples in the export when detecting previous
sample. This resulted in a very slow processing as we had to go through
massive amount of data for each event that's time was to be
approximated. The detection of previous sample was also erroneous
resulting in incorrect depth samples for the events in some occasions.
This patch should address these issues. And along with patch that
included pressure data on import this will fix the bug #499.

Well, the performance after the patch is still not stellar, but still
quite a difference with such a small change. The sample set of 8 dives
(with one event each) takes now less than 5 seconds instead of the
original 36 seconds (measured by doing the conversion with xsltproc).

Fixes #499

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2014-04-29 22:02:50 -07:00
Miika Turkia
16d7f5e86e Support for multiple cylinders on UDDF export
Adding support for multiple cylinders on UDDF export. This also adds a
cylinder reference to the tankdata to enable mix lookups.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-28 07:43:21 -08:00
Miika Turkia
683227d2aa Generate UDDF waypoints for in-between events
This patch generates a waypoint for events occurring between profile
samples. It approximates the depth of the crafted waypoint linearly
between the recorded sample depths.

Fixes #385

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-28 07:43:18 -08:00
Miika Turkia
57f85a773a UDDF export: save events occurring between samples
UDDF export saved events only if they occurred at exactly same time as a
profile sample. This patch will include events between samples as well.
This assumes that profile samples are recorded in even intervals.

Fixes #385

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-25 12:47:02 -08:00
Miika Turkia
03a01efdcb We need to use include statement on XSLT nowadays
After change to include XSLT files in resources, the import quit
working (even though the files and templates were found properly). This
patch uses include statement instead as it seems to work in our case.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-12-24 07:16:30 -08:00
Miika Turkia
cd0475fe96 Improve UDDF export to include more dive data
Basic information like buddy, location and visibility is included in
UDDF export. Also attempt to grab temperature information from both
temperature and divetemperature tags.

This partially fixes bug #224. However, at least divemaster and tags are
not exported (as the UDDF spec either does not have these or has hidden
the information of these fields somewhere between so many seemingly
unnecessary other fields).

See #224

Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-11-21 04:25:01 -08:00
Miika Turkia
ac5881c3fe Fix pressures on UDDF export
Examples on UDDF specification indicate that pressures are reported in
Pascal. Also prefer the sample data from first dive computer for start
and end tank pressures.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-03-26 12:52:30 -07:00
Miika Turkia
b18f9fa057 Gases and events support for UDDF export
This patch generates a gases section on UDDF export. The section
consists of all the unique gas mixes sawn on the dive log.

The latter part includes events to the export. Gas change and heading
events are properly translated to respective UDDF naming. Other events
are copied over as is. Some of the events are the same (ascent, deco,
rbt, surface) in UDDF some are not available.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-03-26 12:51:19 -07:00
Miika Turkia
12d5ab4ce3 Export dives to UDDF file
This patch implements exporting dives from Subsurface to UDDF format.
Events and cylinder info are the most remarkable things still missing
from the export.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2013-03-24 06:37:56 -07:00