To every filter list add a menu button that allows selection of all,
selection of none or inversion of selection.
Implements #435.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The TagFilter, BuddyFilter, SuitFilter and LocationFilter classes
all did essentially the same thing. Therefore, factor out common
code / objects into a base class FilterBase.
The new base class stores a pointer to the filter model. It was
felt that this is simpler than introducing virtual methods.
The only thing the *Filter classes now do is setting a label and
in one case a tooltip. Thus, in principle, they could be removed
completely, but let's keep them for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The more complex handling is no longer needed because:
- Keyboard tracking for gfhigh/low UI fields was switched off here:
030c094854
- GFhigh was limited to 40 here:
53fffe0ce3
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
And why this one? Well, while this include is renamed in Qt 5.10
and gives deprecated compile warnings. And as it unused anyway, just
remove it.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Besides being the right thing to do (code reflects reality), it
silences a compiler warning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This implements different zoom levels for the dive photos tab as
suggested by Stefan Fuchs <sfuchs@gmx.de> in #898.
The zoom level can be changed using a slider or CTRL+mousewheel.
Zoom levels range from a third of the standard thumbnail size to
thrice the standard thumbnail size.
Thumbnails are cached in maximum resolution and scaled down on
the fly. Because the profile widget took its pictures from the
photo list model, an extra picture copy with a fixed size had
to be introduced.
The UI is still a bit crude.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Internal floating point (FP) calculations should be performed using double
unless there is a very good reason. This avoids headaches with conversions.
Indeed, the vast majority of FP calculations were already done using double.
This patch adapts most remaining calculations. Not converted where things
that were based on binary representations and variables which weren't used
anyway.
An analysis of all instances follows:
core/plannernotes.c, l.404:
This was a comparison between two floats. On the left side, first an integer
was cast to float then multiplied with and integer and divided by a constant
double. The right hand side was an integer cast to a float. Simply divide by
1000.0 first to convert to double and continue with calculations. On the right
hand side, remove the cast, because the integer will be implicitely cast to
double for comparison. This conversion actually emits less instructions,
because no conversion to double and back is performed.
core/planner.c, l.613:
Same analysis as previous case.
subsurface-desktop-main.cpp, l.155:
A local variable representing the version OpenGL version. Turn this into
integer logic. Not only does this avoid dreaded FP rounding issues, it also
works correctly for minor version > 10 (not that such a thing is to be
expected anytime soon).
abstractpreferenceswidget.[h/cpp]:
A widget where the position is described as a float. Turn into double.
desktop-widgets/divelogexportdialog.cpp, l.313:
total_weight is described as float. Use double arithmetics instead. This
instance fixes a truncation warning emitted by gcc.
The MainWindow::setTitle() function was passed an enum, which depended
on whether existing_file is set or not. The check can be (and was!) done
directly in setTitle(). Therefore, remove the whole enum.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Before, we did not look at the path of the filename to export
to but we should write the images there and not in pwd.
Fixes#931
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Title is self explanatory.
[Dirk Hohndel: small edits to remove typo / improve readability]
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ATM we were giving preference to a gps fix taken during dive time over
another taken before dive start time (proven both in predefined
SAME_GROUP 6 hours range).
While this logic is right for a static boat or a shore dive - as it
ensures a correct position - will fail for drift dives or dives where
boat changes its position during dive time.
Instead, will choose the gps fix closer to the dive start time.
fixes issue #666
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't change into a directory just to see if it exists.
Remove unnecessary braces of one of the changed if statements.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes an actual bug, where the current image dir would only be
remembered on closing the program.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The progressbar was not hidden on failed save to cloud. In return
remove an unnecessary variable on loading from cloud.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Calculating variations when in recreational mode doesn't make sense, and can
prevent variations from being calculated when switching back to Buhlmann or
VPM-B modes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
This reenables the computation of plan variations but now in a separate
thread. Once finieshed, a signal is sent to update the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Small change to allow the dive pictures list to use the available
space if one resizes the window or switches to different mainwindow
view.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Some improvements for the dive picture tab and dive pictures in profile:
- Bugfix mouse event in profile: Only Left-click will open picture
- Bugfix mouse events in picture tab:
- Re-enable context menu (Windows bug mainly)
- Re-enable multi select in a nice way
- Only double-left-click will open picture
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
Disable tabs for equipment, info, pictures and extra info if a
dive trip is selected.
Remember specific tab selection for dives and dive trip to recover
selection when browsing dive list.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Currently, the path to the recently used file is stored in the tooltip
of the corresponding recent file action. Instead, store the number
of the recent file in the action. This allows for more flexibility
concerning formating of the tooltips (think git repositories, etc.).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using four recent files actions defined in mainwindow.ui,
generate these actions dynamically depending on the macro NUM_RECENT_FILES.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The file mainwindow.cpp is only compiled for desktop versions, so the
condition is redundant.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of handing the QSession object down, simply create it in
MainWindow::checkSurvey()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code used to be unnecessarily complex: the recent files list
was extended for each file and shrunk if a load failed.
By adding a file to the recent file list only if the load succeeded, a
whole method could be removed.
Other changes: keep track of the recent files using a QStringList and
clearly separate the actions:
- Read recent files from settings [loadRecentFiles()]
- Write recent files to settings [updateRecentFiles()]
- Update the recent files actions in the menu [updateRecentFilesMenu()]
- Add a file to the list of recent files [addRecentFile()]
With this reorganization the code hopefully became more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
After one selected a dive and then selects NO dive don't touch
the visibility of UI fields for depth and duration.
So if previously selected dive was a manually added dive, keep them
visible. If it was no manually added dive keep them invisible.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Remove duplicate and incorrect setPlainText call via macro for dive notes.
Deal correctly with ASCII line breaks "\n" in dive notes with html
markup (replace them with <br>).
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Currently when the user is typing new coordinates the
marker on the map changes location right away. Disable that and
add a 'flag' button that should be pressed instead. Also make the
coordinates update when pressing Enter or when the text
field loses focus.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
After editing the cylinder table (e.g. deleting a cylinder) and
accepting the changes copy the whole dc samples for the dive edited.
This is important because the sensor idx in the samples may have changed.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
reset_cylinder may transform unused cylinders into zombie cylinders
inside the planner because it adds a depth info and therefore the
planner will use them.
By calling CylindersModel->updateDive these cylinders will become visible
and can be deleted by the user.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
If the user implicitly adds a dive site by editing a dive, and
a location filter is active, check the new dive site in the
location filter.
This is done by informing the LocationFilterModel of the new
dive site name prior to repopulation. The LocationFilterModel
then adds a corresponding entry and marks it as checked.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since commit 01d961086c, the location filter
list is updated if a dive site is edited. The problem is that if the
name of a selected dive site is changed, the selection is lost.
Therefore, before repopulating, inform the location filter that a dive
site changed its name. The location filter then internally changes the
name and can properly transfer the old selection on repopulate. This is
performed via the new LocationInformationWidget::nameChanged signal,
which is connected to the new LocationFilterModel::changeName slot.
A special case to be handled is the following:
[ ] Site 1
[x] Site 2
and "Site 2" being renamed to "Site 1", i.e. both sites being merged.
Here, the merging is detected and "Site 1" will likewise be checked:
[x] Site 1
[x] Site 1
No merging is performed, as the list will be repopulated anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since commit 01d961086c, MainWindow::refreshDisplay()
is called in the refreshDiveInfo() signal of maintab after editing a
dive site. Since this was the only use of the refreshDiveInfo signal,
remove this signal and instead connect to MainWindow::refreshDisplay directly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
