Since we no longer show the noisy git updates to the user, it has become
harder for them to know whether a sync to the cloud was successful.
Since a manual sync will never show the new 'what did you change and
here's how you undo it' notification, it seems easy enough to simply
show a status update.
This adds a passive notification with no action button after the user
either uses the main menu or pulling down on the dive list in order to
trigger a manual sync.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The repositioning message when a virtual keyboard opens is useful enough
to keep it and just hide it unless in verbose mode. The others have all
outlived their usefulness.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes most readonly combo boxes to use the smaller, more modern
looking TemplateSlimComboBox and makes some layout adjustments on a few
pages to overall create a better UI.
A lot of this is just cleaning up things that were rather rough in the
first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the dive list the rendering of the line ended up being subject to
rounding errors. With this change we ensure that the thin line is always
shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML documentation recommends against using the cacheBuffer for longer
lists and doing more testing shows that this really doesn't help at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small optimization that reduces the number of accesses to the underlying
model. Instead of evaluating the isInvalid member eight times per
delegate, we only check it once.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this check we'll show the 'Please tap the plus botton...'
notification during app initialization as we are showing the initial set
of messages - which makes no sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Until the app is initialized, we have problems getting the 'floating'
passive notifications to show up and be useful. Instead update the user
by filling a text block on the otherwise empty initial page of the app.
Delay the switch to the dive list until the app is initialized and then
use the passive notifications again. While we are initializing also show
a busy spinner so the user doesn't think the app is hung.
As a side effect of this change, the dive list isn't shown until our
models are initialized. And strangely this causes every single possible
delegate to be instantiated. We can prevent that by not setting the dive
list model until after we are done setting up the model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was triggered by a change in enabled, but what is really changing is
the visible property. This should work better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are two places where we try to prevemt unintended app exits.
Once, in the onBackRequested signal handler on the dive list. This was
missing special handling for the situation where one of the drawers was
open.
The second place is the onClosing signal handler in main.qml. Naively I
thought that this was enough to catch all cases where we were about to
exit the app, but apparently an explicit manager.quit() is a bit too
forceful and doesn't get to that signal handler.
With this commit we check for open drawers in both places. Belts and
suspenders, I guess.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should deal with the rather confusing 'No dive in dive list' shown
while loading and processing the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since apparently the header property of the ListView isn't reliably
making sure that our filter input line is visible, let's move the filter
header to be it's own visual element and manually manage the
relationship between that and the ListView.
The obvious idea was to anchor the ListView to the bottom of the
filterHeader, but that didn't work in my tests. So instead we are using
the topMargin to make sure that there is space to show the header.
Because this re-indents the whole filterHeader, 'git show -w' gives a
much better idea what this commit actually changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a context menu entry for top level dives that allows the user
to create a trip for that dive.
Unfortunately this creates a new string to translate right before a
release...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We still used pageStack.push() all over the place.
Also, in showPage, disable the map hack if the user actively picks a
different page.
This should fix an issue where the user picked the map and then tried to
add a dive to the dive list - and instead of the dive edit was shown the
map again.
Reported-by: Hartley Horwitz <hhrwtz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was a merge error in the dive list rewrite and brought in a code block that
had moved, which caused issues with correctly switching to the dive list.
Calling setupActions() moves to the diveListView (where it really belongs).
Instead of messing with the visibility of components of the same page, we now
simply switch out the shown page.
Fixes#2667
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I will (mis)use these for moving dives out of trips and to the trip above or
below and of course for undo/redo. And the weirdest one is the 'local offer'
icon that seemed a reasonably good fit to edit trip details.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic when we show the save button is a little fragile (and visually I'm not
sure I love the disabled button), but hey, this works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For now this only shows the trip details. They can be edited on the page, but
there is no way to save those edits, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way one can execute dive list manipulations without the detour
to the dive details screen. For example you can long-press on a dive and then
add it to a trip or remove it from a trip.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This one exposes undo/redo as well as some basic trip manipulations, very similar
to what's already available on the dive details page. Except that here it also
makes sense to add a selected dive to a trip above or below (if those exist and
the dive isn't already in a trip).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still has an odd bug. When we swipe the dive details to change the
selected dive and that action causes a trip to expand or collapse, then
the color change / highlight in the dive list isn't updated correctly,
even though the log file indicates that we made the necessary changes.
This also changes the coloring of the selected dive; having the same coloring
as a trip was very confusing. This is a bit stark, but it clearly communicates
the distinction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The currently shown dive is now controlled by the core.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a small step in unifying mobile and desktop.
I'm unsure whether it is correct to play this via the QMLManager or whether we
should call form QML directly into the model?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This obviously breaks everything, but now we can start fixing
things.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This isn't perfect yet, but it looks fairly reasonable.
This commit was mainly written by Dirk, but includes a few fixes from Berthold
which where squashed into this commit as they really should have been part of
the initial version.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The number of dives was updated when the model of the list was
changed. Since we removed the multi-threading, the model is
not disconnected/connected anymore and therefore we don't get
the appropriate signal. Instead of introducing a different
signal, make the shown-value a Q_PROPERTY. Thus, we can easily
send a changed signal if we have to.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a combo-box where the user can switch between "fulltext",
"people" and "tags" filtering. Connect the combobox to the
already existing filter-code.
Dirk: make combo-box smaller by using a smaller font and restricting
the width. Setting both maximum and preferred widths gives more
consistent results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace CloudStatus.<value> with backend.<value> as part
of making enum sharing between C/C++ and QML more robust.
Replace PrefCloudStorage.verification_status with
backend.verification_status to use the strongly typed function.
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prefs. is only important during the signin process, so use the standard
PrefCloudStorage variable
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
