Increase the precision of the setpoint that can be specified per planned
leg of the dive to 0.01 mbar.
Some rebreather models (APD Inspiration) support this precision for
setpoint setting.
Motivated-by: https://groups.google.com/g/subsurface-divelog/c/pD5gYlG5szI/m/G8_as4TyBwAJ
Signed-off-by: Michael Keller <github@ike.ch>
The conversion between mbar and depth sometimes uses DC's salinity, sometimes user's salinity. By other hand, it uses surface pressure given by user in calculation.
This fix try to standartize this values, using them from same source.
Signed-off-by: Rafael M. Salvioni <rafael.salvioni@gmail.com>
Changed the way dive data points for OC cylinders to be added to the
dive plan are created in `createTemporaryPlan()` in
`diveplannermodel.cpp`. This now uses `plan_add_segment()` like all
other places where dive data points are added, in particular the planner
tests.
This also allowed for `create_dp()` to be made static.
Signed-off-by: Michael Keller <github@ike.ch>
Fixes a bug reported in
https://groups.google.com/g/subsurface-divelog/c/8N3cTz2Zv5E:
When planning a CCR dive with OC bailout, the diluent gas may be chosen
as the first OC bailout gas, despite being set up with a use type of
'diluent', and likely not being available for open circuit breathing.
`best_first_ascend_cylinder` is now initialised to an invalid value
(instead of the first cylinder, which may or may not be a diluent
cylinder), and its subsequent use is guarded by a validity check.
Signed-off-by: Michael Keller <github@ike.ch>
When exiting the loop, stopidx is 0, which means that if there
are no stoplevels, stoplevels[stopidx + 1] generates an
out-of-bounds access. Instead, suppose a stop at 3m or 10ft.
Suggested-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Most of these declared non existing functions or pointers.
One [get_gas_idx()] was only used in one source file and
doesn't have to be globally accessible
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For dives with mixed divemode, one needs to check sample.setpoint
to figure out if the segment is an OC segment and the po2 needs
to be computed from the gasmix and ambient pressure.
This fixes#3310
Signed-off-by: Robert C. Helling <helling@atdotde.de>
the last manually entered waypoint but consider the
possibility that it should first top where we are
before the next stop depth has cleared.
Reported-by: David Carron
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We had a user request to allow for setpoint changes
at certain depths for CCR deco.
You can now enter a cylinder with name like
"SP 1.4" ('S' and 'P' and ' ' and a float) with
a switch depth and that cylinder is interpreted as
a depth dependent setpoint switch.
This user interface is a hack. But I believe that such
setpoint changes are similar enough to gas switches during
deco and should thus be handled in a simiar manner.
I would be happy to hear ideas how this could be made
less easter eggish.
Suggested-by: Justin Ashworth
Signed-off-by: Robert C. Helling <helling@atdotde.de>
To remove reliance on global state, pass an "in_planner" argument
to decoMode(). Thus, calls to in_planner() can be removed.
This is a more-or-less automated change. Ultimately it would
probably be better to pass the current deco-mode to the affected
functions instead of calling decoMode() with an in_planner
parameter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to clear_deco(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to vpmb_next_gradient(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To remove reliance on global state, pass an "in_planner" argument
to add_segment(). Thus, calls to in_planner() can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since dive.c is so huge, split out divecomputer-related functions
into divecomputer.[c|h], sample.[c|h] and extradata.[c|h].
This does not give huge compile time improvements, since
struct dive contains a struct divecomputer and therefore
dive.h has to include divecomputer.h. However, it make things
distinctly more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In an effort to reduce the size of dive.h and dive.c, break out
the event related functions. Moreover event-names were handled
by the profile-code, collect that also in the new source files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The clock is only valid in ascent. In each cycle of the
'critial volume algorithm' it re-initialized to the
bottom time at the beginning of deco. So the time spent
on bailout should be added to this bottom time.
Thanks to Coverty for spotting this.
Coverity-scan: CID-362079
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The SAC factor is only used for minimal gas calculations which
don't make sense in the CCR context.
Additionally, make bailout stop for at least minimum switch
time or problem solving time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
No point in slurping in all of dive.h for translation units that only
want to do some time manipulation without ever touching a dive.
Don't call the header "time.h", because we don't want to end up in a
confusion with the system header of the same name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When we had fixed-sized cylinder arrays, the planner used the last
empty cylinder for "surface air". This was not recognized by the UI
as a separate cylinder, because "empty cylinder" was the sentinel for
the end of the table. The conversion to dynamically sized cylinder
tables broke this code: everytime the surface segment is changed,
a new dummy cylinder is added, which is visible in the UI.
As a very temporary stop-gap fix, emulate the old code by creating
a cylinder and then setting the end-of-table to before that cylinder.
This means that we have to loosen the out-of-bound checks.
That's all very scary and should be removed as soon as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be temporarilly used by the planner to mark consumption of
air at the surface. Do this by creating a new function add_cylinder,
which replaces add_to_cylinder_table() and takes care of always adding
a dummy cylinder at the end of the table. Make the original
add_to_cylinder_table() local, so that it cannot be accessed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In two cases we were passing the magic value 8 instead of the
symbolic SAMPLE_EVENT_BOOKMARK. Use the symbolic version instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Moreover, move the declaration from dive.h to equipment.h.
The result is a) more consistent and b) more logical.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The test if we have to create gas switches wasn't yet aware
of the bailout option.
Reported-by: Dennis Arreborg <dennis@arreborg.eu>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When gas switching only on stops is selected, the notes
showed an extra line at the not realized stop depth. This
eliminates it. It also makes sure there are no 0 second
spurious entries. And gas switching takes more than zero
time (otherwise we would have to print a line of zero
duration for at the gas switch depth).
Reported-by: tormento <turment@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
That was used to store the disclaimer of the last plan. The
functionality was disfunctional for a long time, therefore
remove the variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Enough gas was checking the currently displayed dive instead of the
dive to be planned. Not good in a multi-threaded context. Pass the
actual dive instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Pass the dive to be planned to track_ascent_gas and don't use
the displayed_dive. For convenience, pass the cylinder-id, since
the function can now access the cylinder of the dive by itself.
This makes the callers less verbose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function comment talks about overwriting displayed_dive, when
in reality the function overwrites a passed in dive.
Also fix a debug-call which dumped the displayed_dive, not the
actual dive to stdout.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The fill_default_cylinder() function calculated the MOD based
on the currently displayed dive. This does not seem to make sense:
- When importing dives, why would we care about the altitude and
salinity of the currently displayed dive, possibly from a different
trip.
- The planner is supposed to be thread-safe and should not touch
global variables.
Of course this means that the importing-functions have to fill
out altitude and salinity before creating the default cylinder,
but this is their problem. For a freshly created dive they will
get the default values, which still seems less random than the
values from the displayed dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing the global displayed_dive to
calc_crushing_pressure(), use the dive the planner is working on.
A small step in making the planner thread-safe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser had global state in the form of a linear regression
and the "plot_depth" variable. Collect that in the deco_state struct and
pass it down the call-chain. Move out the code to update the
regression data to not bother other callers of tissue_tolerance_calc().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Bailing out does not happen instantly. Rather wait for
the minimum stop switch duration before ascending.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The last direct user of the used parameter was removed in
16276faa45, the last actual user in
e2bbd0ceec.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function declarations of regressiona(), regressionb() and
reset_regression() were given in an independent translation unit.
Move them into the proper header file. To ensure consistent function
signatures is the whole point of header files, after all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The lookup tables decostoplevels_metric and decostoplevels_imperial
in planner.c were not used outside the translation unit. Make them
static.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
