The number 0 means "this dive has not been numbered". So manually
assigning this seems wrong.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user doubleclicks on the number of the dive in the dive list,
this will present to him a dialog to change that number. Pressing enter
will renumber the dive if there's no dive with the same number already.
Fixes#288
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just reverts some wrong changes that I'v done on a
past commit ( sorry ) and correctly handles the selectDive,
by using a IDX instead of the dive pointer, as dirk told me
it's extremely error-prone since the pointer can change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's very important when programming via Model/View, in gtk or qt,
to not mess with the model data outside of the model. We were
deleting stuff that the model controlled outside of the model, so
it thought that there was still data there. This fixes the deletion
part, but there are also lots of other parts that I'll tackle in
the next commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The air types model had a font bigger than the
other models, this patch creates a data() method
that correctly delivers the correct font.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the edition of alphanumeric input,
columns like depth accepted '23ft', '20m' or '30', with
an inplicit conversion to the unit. But the code ignored
that the input could have a 'ft' or 'm' ( ot anything else
for that matter.
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- you can no longer delete a tank when its gas is in use
- therefore you can no longer delete the last tank
- when you change the gas mix of a tank, the corresponding segments in the
dive change as well
- when changing gas for a segment the correct available gases are offered
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
divelist.c:
get_dive_date_string()
get_short_dive_date_string()
get_trip_date_string()
MinGW support for *printf and parameter positions (e.g. %1$d)
is horribly broken. Instead of implementing *proper* support
for this feature Microsoft decide to ignore the standard (again)
and they implement new functions with the '_p' suffix,
such as 'sprintf_p', which seem to be available from a 2003 runtime.
To top that 'sprintf_p' is not really a 'sprintf' but rather
a 'snprintf'.
It seems that the MinGW people ignore the issue and do not provide
wrappers of any sort, or at least for the current recommended compiler
for Qt 4.8.5 on Windows - which is a 4.4.0. A note of warning;
inspecting how MinGW does certain things in headers such as stdio.h,
can ensue bad dreams or other negative effects on to the viewer.
This forces us to move the following functions from the 'back-end'
(divelist.c) to the 'front-end' (qt-gui.cpp) and use QString.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add units to the SAC in the print-out, reduce max depth in metric to one
decimal place, and leave some more characters of the notes to be printed..
Signed-off-by: Robert C. Helling <helling@atdotde.de
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of varying font (screen) DPI we use pixel sized fonts
when printing. Apparently 8px does not look that good on Windows
default fonts, but kinda OK on Linux. We compensate by
increasing the font size and table rows to 9px.
Also decrease the padding between the table and profile to 5px.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
CylinderModels::setDive() and WeightModel::setDive() have
potential to pass the 'last' argument to beginInsertRows() as
a negative number which triggers an assert that 'last' cannot
be smaller than 'first'.
Patch attempts to fix that by only calling beginInsertRows()
when there is at least one row to insert.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The end pressure was appearing in the column headed "O2"
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are other models ( Tree Models and Model Items
) that are not affected by this commits, this is
already a good cleanup but it can be extended
to also fix those two other possibilities.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Second model converted to be less boilerplated,
there are right now 7 models that will need to
be ported. each model can remove around 30 to 40
LOC, so this is not such a bigger improvement,
but it's an 'keeping an eye on the future'.
Also fixed a bug where the returned value was dummy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
The Model View system in Qt is *very* verbose, this is the
beginning of a series of patches that will concentrate
the boilerplate somewhere and reduce the amount of lines
and will also try to make the code cleaner and easyer to
understand,
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Add a helper function to unify the calculation of the
weight display string, instead of having the same calculation
in two places in the code.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface stores weight values in grams. When displaying lbs,
the dive list was not rounding the converted weights up, but
rather truncating the value at the decimal place. The equipment
list was rounding the converted weights up. This gave two
different displayed values for the same weight value.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a couple of classes and some other modifications
in PrintLayout that handle the printing of tables under a profile.
models.h : ProfilePrintModel
The class uses a 'struct *dive' to output all required data
for a certain dive at specific rows and columns. It also handles
font formatting and text alignment.
modeldelagatates.h : ProfilePrintDelegate
The class is used only for drawing a custom grid for profile tables.
PrintLayout::createProfileTable()
The function is used to create and setup the profile table object
PrintLayout::printProfileDives()
The function now has correct padding of dive profiles on a page
and also the printing of actual tables below them.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code marked the dive list as changed on any
of the changes in the model, this was incorrect since
the user could just cancel the edition, wich means
that the divelist shouldn't be marked as changed at all.
when the user clicks on'accept', and the item is indeed
changed on the dive list, then we mark_divelist_changed
to TRUE
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a 'changed' member on Cylinders and weigth models to mark when
one was changed or not. Only the changed data should be inserted on
the selected dives, so if the user changes the cylinders on a multi
edit, there's no need ( and it will actually break things if we did that )
set the weigths too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
When updating the weight system model we have to remove the old ones and
then correctly count the new ones.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is correct C. But debuggers in C++ mode are broken and can't display
the global variables. While I hate having to do this change, I hate not
being able to debug my software because of broken tools even more.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code to initialize the weight systems from the last datafile loaded
had not been brought over from the Gtk version.
We now correctly update the data structure when loading file (but not yet
when editing values).
Most likely the same needs to be done for the tanks as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current QTextDocument implementation is slow due to
HTML parsing. By using QTableView with QAbstractTableModel
we boost the performance of the table print drastically.
This patch completely replaces the old solution.
There is a hidden QTableView widget which is populated
with all data and rendered using a QPainter attached to
the printer device.
A couple of new classes are added in models.h/cpp
that handle the table print model and these are then used
in printlayout.h/cpp.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Working Press didn't correctly updated when there was a 'bar'
or 'psi' in the string ( and that was defalt behaviour );
The o2 didn't correctly updated when there was a '%' on the string
(and that was default behaviour ),
The He didn't correctly updated when there was a '%' on the string,
and that was also default behavior.
Now all of them correctly updates.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This is a follow up commit to the previous one that
enabled cancel for cylinders, everything in the commit
log for the cylinders also applyes here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Made the default 'Cancel' action correctly cancel
the cylinder edition. This is needed only because
we bypassed the default behavior on Qt that took
care of this, because we wanted to have more control
on how the view would update the items accordingly
with wich one of the cylinders were selected
on the edition pane - the pressure and size of the
cylinders needed to have it's data set, but the Qt
Model/View system *thinks* that cancel-edition is
simply 'do not commit the edition data, then.' wich
would not work with us, because we passed the strange
data already. So, I created a backup data that serves
us very well. When the user cancels, this backup data
is added back on the cylinder, making everything as
it was before.
[Dirk Hohndel: removed the inadvertendly added boost header]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the combobox behavior on the inline edit
to what it was ( well, similar to ) the GTK version,
up and arrow keys will walk you to the list of choices,
and it will update the other data as soon as you walks over it
one drawback is that you cant ( for now, since I do have a
very big headache at the moment ) cancel, since the cancel
will just forgets the item and do not call 'setData' on the
model, but we already called it while walking on the list.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Add this helper so that we can easily wrap the required
memory release after calling get_dive_date_string()
(fixes a small memory leak).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
So during my Maui trip, I had a short hiatus in diving, causing
subsurface to start a new trip for the last day of diving. I could have
just started the old gtk branch to fix it up, but decided that I might
as well try to implement the "merge trip" logic in the Qt branch instead.
This is the end result of that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we don't have any manually set pressure data, show the data from the
samples instead. It uses an italic font for this case, mainly because I
couldn't figure out how to gray things out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's just distracting. Leave it empty. No helium should be visually
very different from actual trimix, and for oxygen, zero means something
different anyway (it's air). In neither case is '0.0%' a good string to
show, just show it as empty.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes us use the same linear calculations as we did in the Gtk
branch. We don't take compressibility into account, since tank
manufacturers don't seem to either. A Luxfer AL80 is 11.1 liters, and
with the standard (non-compressibility) calculations, 80 cuft of air at
3000 psi is 11.094 liter, so that is the right model to use.
Also, stop with the horrible "units in edited numbers" stuff. It uses
up precious space, and doesn't look any better. If the user asked for
cuft, give him cuft without making a big deal about it.
Oh, and if the working pressure doesn't exist, sizes are always in
liters. That's what we did in the Gtk branch, that's what we do here.
Again, no reason to even bother stating units, it's not helping.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do gas mixes in permille, not in percent. Some people really like
using the value they got from the analyzer, which is generally something
like 29.4% or whatever. So don't truncate percentages to integers.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since no one else approximates gas volumes at higher pressures, we
shouldn't do that either when converting imperial tank names (cuft @
working pressure) into wet volumes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't even begin to explain what got me to write this in the first
place. It makes no sense from any angle I look at it...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make the entries for years bold, keep the months non-bold.
It's still a sea of data, but this is an improvement.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit fixes two issues. One is that there were situations where
the code would read an uninitialized parent pointer, the second was that
instead of the monthly statistics the tree view would show the yearly
statistics again under the yearly entries.
I assume that the second part of the fix (initializing the parent
pointers) actually takes care of both of them (that patch was suggested
by Tomaz), but the first part that just makes sure the pointer is at
least initialized to NULL seems to be at least not harmful, so I kept it
as well.
With this the yearly / monthly statistics seem to be pretty much at
feature parity.
Fixes: #115
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Display the units in the header, make the header more consistent
looking, convert the values into the right units with appropriate
precision.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
